Problems with opening Canon T4i CR2 files in elements 10

I have a cannon rebel T41 and Adobe elements ver 10, ive been taking photos in RAW format but cannot open them in the elements software, the files are saved as a CR2 file can anybody help please.

The T4i was first supported by ACR 7.1.  The last ACR version supported by PSE10 is ACR 6.7.
This means you need to update your PSE to 11 or 12 to work with T4i CR2 files.  Or maybe buy Lightroom, which is about the same price as Elements but contains all the raw adjustments not just the few in the Element’s-hosted ACR plug-in.
http://www.adobe.com/products/photoshop-lightroom.html  (on sale for $120)
http://www.adobe.com/products/photoshop-elements.html  (upgrade $80)
Here are the Adobe links with the information about what cameras are supported by what versions:
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html

Similar Messages

  • Open Canon 6D, CR2 files in Elements 10

    I recently upgraded my camera to the Canon 6D. Took loads of great pictures only to find that when I tried to open them in Elements 10 the programme didn't support them!!!
    I've search and trolled through every forum I can find lookong for a solution, to no avail! Can some one please help or do I simply just have to upgrade (again) to Elements 11?
    Thanks for any help I may receive in advance, furious!!!!!!!!!!!!!!

    According to the supported cameras list, the 6D was first supported by ACR 7.3, which is newer than PSE10:
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    You can buy PSE12 which comes with ACR 8.x, or you can convert your CR2 files to DNGs, a folder at a time, with the free DNG Converter 8.2 and open them with the older Elements ACR plug-in.
    The DNG Converter is available from the Adobe Updates page:  http://www.adobe.com/downloads/updates.html
    I’d suggest downloading the trial for PSE12 and make sure it works on your system before paying for it.

  • I am unable to open canon 6d raw files w/ elements 11

    I am unable to open canon 6d raw files w/ elements 11. It seems that camera raw 7.1.0.384 is installed. I tried to update and nothing happens.Any help please?

    Sometimes the Adobe servers can get busy; so try again from Expert Mode:
    Help >> Updates
    You should be able to select ACR 7.4 (see image) and then click the update button.

  • Problem with opening a dmg downloaded file.

    I have a problem with opening a dmg file type. Example. I down loaded an update for Onyx. The download is placed on my destop. OnyX.dmg. When I click the file, disk utility opens up. I click OnyX.dmg and it attaches the image. I then have the OnyX disk image on my desktop. I click on OnyX.pkg and get the message "There is no default application specified to open the document "OnyX.pkg"
    I remember when I 1st installed the program months ago. I just dragged the icon to the applications folder and was done.

    There is something rather odd with your defaults for opening things. Double clicking a .dmg file should cause it to mount automatically using DiskImageMounter, and double clicking a .pkg file ought to cause Installer to run. DiskImageMounter is here:
    /System/Library/CoreServices/DiskImageMounter
    and the Installer is here:
    /System/Library/CoreServices/Installer
    You can use GetInfo to assign those programs to those file types. You might consider fixing your LaunchServices database. See the discussion thread here:
    http://discussions.apple.com/thread.jspa?messageID=5744911
    Using OnyX is probably the easiest solution.
    Francine
    Francine
    Schwieder

  • Problems with opening Canon 1ds III .CR2 files in CS 3

    I have just purchased Photoshop CS3 student edition. However, when I try to open .CR2 files from my Canon 1ds III, a message stating that Photoshop "could not complete my request as it is not the right kind of document" appears. Whilst I can get round this by saving from DPP (which does not allow me to transfer the .CR2 files directly to Photoshop) as TIFF, this is quite slow.
    Has anyone experienced a similar problem? Help on finding a cure would be much appreciated.

    Stephen,
    Make sure you've got the latest version of Camera Raw. The package you have is probably compiled before the Mk3 was out.
    Rob

  • Opening Canon T4i RAW files in PSE10

    Hello everyone
    I recently traded in my Canon T3i for a T4i, and now PS Elements 10 won't open the CR2 RAW files from this camera.   According to "Help - Plug In" I have V 6.7, so I went to the Adobe site which said I needed V 7.1, which I download, and extracted, but it won't install it in the software; when I click on the extracted AdobePatchInstaller application, I get a message stating  "Update Failed" and "this patch is not applicable for you".   Also, when I click "Help-Updates" it tells me everything is up to date.  What can I do?
    Scutty
    Message title was edited by: Brett N

    Some jokingly call it the Adobe Tax.  If you buy a recently released camera, the specifications for RAW files are probably different than previous models.  Adobe takes those specs, camera by camera, and adds thme to ACR.  Adobe does not make current new versions of ACR available to legacy software.  Hence the "tax".  You wrote that your newly released camera is in 7.1.  To use ACR 7.1 conveniently ("natively"?) you have to have the versions of Adobe's tools that use the 7.x series.  That would be Photoshop Elements 11, Premier Elements 11 and Lightroom 4.x
    It was my turn to learn the lessons of the Adobe Tax for a Sony RX100 I bought last year!
    Adobe is not entirely rude about this!  They give away the "Adobe DNG Converter" that is updated in parallel with ACR.  You can, with out paying a cent, download the converter and it will make Elements 10 compatable .DNG files from your CR2 files.
    Good luck!
    Bill

  • HELP! Cannot open Canon RAW (CR2) file in PP5.5.2 (Mac)

    Hi folks.
    I cannot import RAW (CR2) files (Canon 5D2) files into premiere pro 5.5.2!
    I can get them into After Effects (through cameraraw) but PP does not even show them as a "supported file type"
    If I drag and drop from the finder I get "unsupported file type" error
    My understanding is that CR2 files are supported in CS5.5
    Any ideas
    MacBook Pro OS X 10.7.2 (Lion)
    For the rest, everything seems to be "normal"
    Thanks in Advance
    Tom

    To use Camera RAW, you will need to process the files through a Camera RAW converter. With the proper ACR module, PS, and Lightroom will handle that processing, as will the Canon utility. With Adobe ACR, make sure to update to a version that handles YOUR camera's RAW files - mfgrs. tweak those model to model, so keeping the ACR module current will insure that you can handle the particular Camera RAW files properly.
    I agree with Stephen's rec. to NOT use JPEG, if ultimate quality is of a concern. In PS, I just process my Nikon, Panny or Canon Camera RAW files to PSD. I would assume that the Canon utility would have the option for TIFF, as my older one does - there is no option for PSD in it. Do not know about the newer Canon Camer RAW processing, but TIFF should be just fine.
    Good luck,
    Hunt

  • Problem with opening more then one file in Adobe Acrobat X Pro - nvd3dum.dll

    Hello,
    I have Adobe Arobat X Pro version: 10.0.1.434. Everything works great up to now. Last time I done upgrade my system to windows 7 64bit with SP1. When I open pdf file in adobe acrobat everything works great, but when I open second file, I receive this problem that Adobe acrobat stopped working and I receive this error : nvd3dum.dll. I have red somewhere that it will be due to driver to graphic card or DirectX. I upgraded them to a new but nothing, problem still remained.
    Here is problem details:
      Nazwa zdarzenia problemu: APPCRASH
      Nazwa aplikacji: Acrobat.exe
      Wersja aplikacji: 10.0.1.434
      Sygnatura czasowa aplikacji: 4d457194
      Nazwa modułu z błędem: nvd3dum.dll
      Wersja modułu z błędem: 8.17.12.6658
      Sygnatura czasowa modułu z błędem: 4d27c323
      Kod wyjątku: c0000005
      Przesunięcie wyjątku: 003814fb
    Anybody tell me what must I do to disolve problem to open not only one but two, three .... and so on. Has anyone noticed the same problem at home?
    Thank all for advice
    marbross77

    Hello Dave
    the Problem affects all Uniplot 3d Files. I start with an Excel or .txt file with 3 columns and uniplot creates an engine diagram similar to this one: http://www.uniplot.de/documents/de/_images/Uni_BSP7-2.png
    Uniplot can Export this as a .u3d but it can not be opened with Adobe. Then I tried to open the .txt.file with MeshLab. I can see the correct Points (which Uniplot uses to create the engine diagram) but of course they are not connected. If i Export those Points in MeshLab as a .u3d file, Adobe can not work with it.
    I do not know how to deal with this Problem. Do you have any suggestions?
    Thanks in advance for your help

  • Problems with opening jpg or tiff files in my own file groups

    I have installed Aperture 3.1 from the apps store, but it does not open any of my jpg or tiff files. They are not stored in iPhoto or any other Apple feature, but in my own file system based on types and purpose. They are all scanned analog images made long ago; I do not use a digital camera

    Hello George,
    george e.todd wrote:
    First there is no error message - but BTW I did not have Aperture beforhand; this is only the 3.1 downloaded from the App store. Could that be the reason?
    It is a pity, that there is no error message, so we just have to guess.
    The App-Store version should work just like the boxed version.
    I'll check the info panel of any of my images, but as I've never set up anything like sharing or permissions, etc.,
    You do not have to set up permissions to have problems with permissions. With each file in MacOS there are stored acces rights, and some times these are wrong, if the files are created by certain apps. Then you need to correct those.
    But as Preview can open your pictures, then there seems to be no permission problem.
    To me it seems likely that the images use a codec, that Aperture does not understand.
    I would like to make sure that you can import  any pictures at all into Aperture.
    Could you try to take a picture with "Photo Booth" and try to import it to Aperture?Photo Booth pictures should be imported without problems.
    If you can import from Photo Booth, then your image codecs probably are the problem, and you need to find out what is special with your pictures, maybe you can post one as link for us to inspect.
    if you cannot import any pictures, then probably something is wrong with your Aperture installation. In the latter case you might wish to perform the basic trouble shooting procedure

  • Can't open Canon 7D CR2 files in Bridge

    I have Photoshop and Bridge CS4 running on an iMac.  I just purchased a Canon 7D (great, btw),.  Unfortunately Bridge and Photoshop can't open the files.  The error message says Photoshop can't recognize this type of file.  I can convert them to tiff, jpg, etc using other programs, but I'd rather not have the extra conversion.
    Any advise on correcting this error?

    wmhernandez wrote:
    I have Photoshop and Bridge CS4 running on an iMac.  I just purchased a Canon 7D (great, btw),.  Unfortunately Bridge and Photoshop can't open the files.  The error message says Photoshop can't recognize this type of file.  I can convert them to tiff, jpg, etc using other programs, but I'd rather not have the extra conversion.
    Any advise on correcting this error?
    It sounds like you are running an older version of the Adobe Camera Raw plug-in.  That camera model was not supported in versions 5.5 and earlier of Adobe Camera Raw. 
    You need to upgrade to ACR 5.7, which is the last version of ACR to run with CS4.
    Use the auto updater in the Help menu of Photoshop.  If it doesn't work for whatever reason, download ACR 5.7 amnually and carefully install it according to the instructions.  Please note that the path to the correct location starts with your root level Library, not your user library.
    Wo Tai Lao Le
    我太老了

  • WebDynpro: Problem with opening the generated xls file

    Hi,
         I am new to the WebDynpro for Java world.
    I am trying to learn by referring to the sample tutorials on SDN.
    I tried executing the sample project for the exporting to excel.
    After I down load the generated xls file to my computer and try opening it I get an error message from excel : "Microsoft Excel Viewer cannot open files of this type".
    I get the same error message if I try opening the file directly instead of first downloading it.
         Please help me out with possible reasons for this.
    Thnx in anticipation,
    Pravesh Puria.

    Hi,
    Is the content type : application/vnd.ms-excel.
    I guess the problem is with identification of the content type.
    Regards,
    Sujana

  • Unable to open Canon 7D CR2 raw files in Photoshop CS6

    Hi Folks,
    I have been trying to open Canon 7D CR2 raw files in Photoshop CS6 (Extended) (Windows 8.1) but I'm always getting the error "Could not complete your request because the file format module cannot parse your file".
    I installed the Camera Raw plugin ver 8.8.0.397 today. Did this initially by downloading and running the CameraRaw_8_8.zip available here Camera Raw plug-in installer. Still got the error.
    Went and did the Check Updates in Photoshop and updated the Camera Raw (and other components) but STILL cannot open the CR2 files.
    I can see the thumbnails in Bridge but when I double click to open them in Photoshop, same error.
    Cannot seem to get past the "Could not complete your request..." error.
    Any ideas?
    Cheers,
    Doug...

    Hi Folks,
    Thanks for your replies and assistance so far, very much appreciated. Its a very frustrating problem... this should be one of those things that just work.
    I have uploaded two sample pics taken with my canon 7d. If you get a chance, could you please try opening these images to see if they work on your machine.
    http://www.bespoke-gems.com/images/gemstones/misc/rawtest1_canon7d.cr2
    http://www.bespoke-gems.com/images/gemstones/misc/rawtest2_canon7d.cr2
    I have tried opening them on both my office and home computer but neither of them work.
    Hmmm... could it have anything to do with the lens (Canon Macro Lens EF  100mm1:2.8 USM)
    Many thanks!

  • Can't open cr2 files in Elements 11 - win 7 64 - canon eos M2

    I can't open my cr2 files in Elements or in Corels Aftershot Pro2. They open in Canon's digital photo pro but that's not much help.
    Any ideas?

    Glenans a écrit:
    "As has been stressed before," - but not to me and I never imagined that there was any "present converting software that can edit the raw files from cameras which will be issued tomorrow". What I did imagine was that old software is updated to include newer and newer cameras and this seems to be the case.
    It's in my first post : "Since each new camera model has its own raw format," but I admit that the camera raw format is totally counter-intuitive, which explains why this questions is the most common in the Adobe feedback forum: Photoshop Family Customer Community.
    The technical problem is that the ACR module is not totally an independent module you could update without updating the whole Elements version. If you look at the list of required ACR version for different Elements versions, you can see that the ACR version may be updated to a certain point, but that may depend on your OS version. Adobe's solution with the DNGconverter has pros and cons. It's an additional step, yes, but when you deal with large batches, it's less of a problem. Also some may find the DNG conversion useful. My raw files are 32 GB, when converted to DNG they are reduced in size and the time to open them is reduced. I like the ability to 'lossly compress' them, which is a much better solution than saving to jpeg.

  • Canon G9 CR2 File Problems

    I'm running into some troubles with this combination of CR2 files from the Canon G9 and using Lightroom 1.3 or Photoshop CS3.
    When I import the files from the camera using Lightroom's import function (and yes, I have the 4.3 camera raw update installed), Lightroom brings over both the .jpg and the .cr2 files (so far, so good) but then I run into problems.
    First problem: The .CR2 files have improper white balance set on them. catastrophically so, as I'm using the camera for infrared shots and without the original white balanace settinsg taken at the time of shooting the shot is useless. The .jpg's are fine, but obviously lack the full details of a raw file, which I would prefer to work with.
    Second problme: When I right click on the .cr2 image in Lightroom and choose to edit it in Photoshop, the result is that Photoshop opens the file as a Tiff image and I never get the opportunity to use the Camera Raw loader settings for the raw image in photoshop, which are fairly important to me.
    Third Problem: If I open the image directly in photoshop, it will initiate the Camera Raw 4.3.1 loader (a good thing) but still has the color balance issues. And for an instant when the file loads in camera raw 4.3.1, a triangle warning sign shows in the upper right corner of the picture then dissappears. I have tried using the Adobe RGB, Colormatch, ProPhoto and sRGB settinsg, 8 and 16 bit, all to no avail, I still lose the white custom balance as shot.
    Any help on this would be very much appreciated, I've thus far been totally unable to work with raw images from the G9 regardless of what versions of the various software and tools I have loaded.

    Hi, thanks once again for responding.
    My dilemma is that the final results of an artifically induced white balance through channel switching won't give the same results as the false color image produced when the original white balance is done on-site using the non-IT filtered color metering system of the camera. It can give an approximation, but it will lack in a great many nuances.
    IR images taken using the Canon G9 produce correct .JPGs, but the processing of the CR2 files by camera raw is flawed in the way that it is handling the white balance settings in the CR2 it seems. Images produced by other camers such as our Nikon D80 or others that use formats other than CR2 come through perfectly. Only the CR2 images are incorrect. This may be linked to the use of custom white balances instead of standard white balance settings, perhaps something in the file contents identifying which white balance (the camera has approximately eight) is being used and should be processed. Or perhaps the file itself is being incorrectly produced by the camera. Who know, eh?
    I know the CR2 format in the G9 is relatively new and full support will come in time, but I'd hoped that it was some obscure setting that could get us back on track. In the meantime, we are using the .JPG images from the G9, which come through correctly processed. But this is sub-optimal, and one of the primary reasons for settling on the G9 was to have the raw images. Afetr all, how many 12MP compact cameras out there produce raw image files, eh? :)
    If nothing else, perhaps this conversation will prompt some research and eventually correct processing of CR2 will emerge.

  • Problem with opening a indd file in CC 2014.

    When I'm trying to open a 5.5 .indd-file in CC 2014 on my Windows computer, I get this error message: 'Either the file does not exist or you do not have permission to open it or the file is used by another program'. However my collague has no problem with opening the document on his Mac computer. I guess it has something to do with a kind of setting in my CC 2014. Can anyone help me?

    Nothing to do with ID. It really means what it says - your file permissions are hosed and it being an ID file this could include things like fonts or placed images referenced within it.
    Mylenium

Maybe you are looking for