Problems with opening CS3 doc in CS5 (stroke added, etc.)

After importing documents to CS5 from CS3 I find that I have strokes in the text frames (some of them at least) and the page numbers lack kerning.
http://tinypic.com/r/2mzfy1c/7
No stroke exists in the text frames belonging to the master pages, nor did reapplying the master page spread change the stroke to zero.
Suggestions?
Thank you.

Yes, I only opened it in CS5. This problem did not exist in CS3.It is not constant against all files and all pages.
I have uploaded a bare bones version of the indd file here:
http://www.savethemanatee.com/stroked_CS5.indd

Similar Messages

Problem with opening cs4 document in cs5.5

I have quite a big document of a catalog, created in InDesign cs4. It contains many layers and different master pages. When I open this document in cs5.5 layers and master pages get completely confused and the document looks completely different. When I created the inx-file in cs4 and opened it in cs3 everything was alright. Does anybody know what the problem in cs5.5 could the problem? Am I doing sth wrong?

I've been looking at the file, and it is indeed a puzzlement.
There is some good news, however. I don't know why it is happening (perhaps a bug, and maybe John would like to take a look at this, too), but it looks like the Paper-filled rectangle from Hinweise layer on the right of Master Ee is being copied to the left half of the actual document spreads on random layers. The pages that seem to be blank are easy to spot in the Page panel (22, 24, 26 & 32) and you can simply Cmd-Shift click on the rectangles on those pages to override and your text and graphics will be revealed. I'm not immediately picking up any other problems scanning quickly through the pages. For a quick and dirty get it done solution, I think this will work, though I would use the .inx file rather than the .indd for the conversion in CS5.5.
I've looked through the file history, and it is long. This started out in 2007 in CS2 and has gone through updates in CS3 and CS4, and been recovered from crashes at least 4 times (which might have something to do with the strangeness). I also think there are a lot of extraneous unused frames on many of the pages. If it were my project, I'd probably clean it up as much as possible in CS4, even going as far as recreating the master pages in a new document and then going page by page and doing a copy/paste in place of all non-master objects into the new file if you don't want to spend the time to place everythign again from scratch, which in my opinion would be a better idea (I tried moving the pages to a new file, but that didn't make any difference in the CS5.5 conversion). You could also rebuild from Scratch in CS5.5.

Problem with opening re-install of CS5 Design Premium on Mac.

I am trying to open component programs of CS5 Design Premium in Mac OS10.7.5 after re-installing CS5 on my MBP late 2008. I receive the following message:
"Configuration Error:
A problem has occured with the licensing of this product. Restart your computer and re-launch the product.
If this problem still occurs after restarting, contact Customer Support for further assistance, and mention the error code shown at the bottom of this screen.
Error: 213:5
http://www.adobe.com/support/"
I have restarted the computer and still get the same message. I have tried to "reset" permissions for the SLStore and Adobe PCD folders, as recommended in support, to no avail. What is the solution?

http://helpx.adobe.com/creative-suite/kb/installation-creative-suite-4-or.html

Problem with illustrator cs3 : stroke

Escribe texto o la dirección de un sitio web o traduce un documento.
Cancelar
hi, i'm new in illustrator and i have a problem with it; when i choose in stroke 0,75 or less than 1, i can't change it, but when i choose more than 1, it changes. I select the whole picture but it still does not change.
I hope that tou can help me with this problem.
thanks

Go into the Transform panel and uncheck the box that says Align to Pixel Grid. It is new to CS5 and on by default.

Problems with open an Indesign-Document over Network

Hallo,
we have a specialized problem with opening indesign-documents over network. Our users works with windows-pc (windows7) and adobe CS5 and CS6 and they will use there documents which are on our macserver 4.0 which works on OS X 10.10.2.
Sometimes the usurers become this Message
Wouldn't work indesign proberly on windows with documents which are on a macserver?
Please help me.
best regards
chris mueller

@Naga Sai J – you cannot open an InDesign CS4 file in the previous version.
But you can export an exchange file format for InDesign CS3.
Go to File/Export and chose INX for export: "InDesign CS3 Interchange-Format (INX)"
That .inx file could be opened with InDesign CS3.
After opening the .inx file, examine it well!
Some things might have changed (things regarding to newer or changed features from InDesign CS4).
Uwe

Printing problems with InDesign CS3 running on OS 10.6

I recently upgrade my old G4 Mac (OS 10.4) to a new Mac Mini running OS 10.6.6. I am still running CS3 and have encountered only one problem. When I print multiple copies documents from InDesign that contain several layers, each copy is processed separately, so that it can take several minutes just to send the print job to the printer if I'm printing over 20 copies. Then once the print job is processed the printer pauses between every copy, which is tripling the printing time. If I print a simpler document with only one or two layers it processes all the copies at once, as it should. I am printing on an Okidata 6150 color laser printer.
I never had this problem on my old computer. I'm wondering if this is one of the "unsupported" bugs of running CS3 on Snow Leopard. I want to make sure that this is a problem unique to running CS3 with Snow Leopard before I go ahead and upgrade to CS4 or CS5.
computer: Mac Mini core 2 duo 2.4 ghz processors, 4 gb RAM, printer: Okidata 6150 DN color laser printer.

Hi again Peter
It is version 5.0.4. I updated it when I newly installed it a week ago in my new computer, and then again updated it just yesterday.
I might mention that before I got my new computer, I was running Mac OS 4.11, and was using InDesign 3.0. I had bought InDesign CS3 about a year ago, but hadn't gotten around to using it since version 3.0 had been working fine, and I was used to it. Then, when I got my new computer, I decided it was time to use the newer version. However, while using InDesign 3.0 with the old Mac OS 4.11, a printing problem popped up there, too, a few months ago... and it also involved printing problems with Adobe Reader. I contacted Adobe, and they sent me a patch which fixed it. I will contact Adobe again if need be, although I thought I'd start here first to see if it was a common enough problem that someone might be able to provide a free and routine answer.
Richard
Date: Tue, 15 Jun 2010 20:10:13 -0600
From: [email protected]
To: [email protected]
Subject: Printing problems with InDesign CS3 with Mac OS 10.6.3
I neglected to ask what version of indesign CS3 you are using. I also
notice that Mac OSX 10.6.4 has just been released. It actually
addresses some CS3-specific issues, though they seem to be related to
launching the apps, not printing. It may be worth trying to update,
nonetheless.
Peter Truskier
Premedia Systems, Inc.
510-655-4454
>

Problem with opening some of PDFs in Photoshop CS6.

Hi, I have a problem with opening some of PDFs in Photoshop CS6. It is said: it isn't possible to carry out an order since the module of the file format cannot analyse this file

Don’t know if Reader has this, too, but in Acrobat one can check under Document Properties.
I can convert and place the file in Photoshop CS6.
I would recommend trying the usual trouble-shooting routines and if nothing helps un-installing, running the Cleaner and re-installing Photoshop. (After making sure all customized presets like Actions, Patterns, Brushes etc. have been saved to s secure location.)
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

AHCI Problems with DW CS3

I have problems with DW CS3 when I use the AHCI mode in BIOS.
Then DW can not start. But I need a solution. Since I do not want
to buy DW CS4 although this runs without any problems.

Yes...the pages from the book display perfectly in dw8, but
not in DWcs3.
I found that by commenting out the "clear:left;" under "#nav"
the page displays properly in DWcs3, too. That leaves open the
question of "why".
Thanks.

Printing problems with InDesign CS3 with Mac OS 10.6.3

I am not new to InDesign... I have CS3... but I am brand new to Mac Snow Leopard (OS 10.6.3). Although I can open CS3 and use the application, I cannot print with it. None of my other applications has printing issues... just CS3. Any suggestions?
Richard

Hi again Peter
It is version 5.0.4. I updated it when I newly installed it a week ago in my new computer, and then again updated it just yesterday.
I might mention that before I got my new computer, I was running Mac OS 4.11, and was using InDesign 3.0. I had bought InDesign CS3 about a year ago, but hadn't gotten around to using it since version 3.0 had been working fine, and I was used to it. Then, when I got my new computer, I decided it was time to use the newer version. However, while using InDesign 3.0 with the old Mac OS 4.11, a printing problem popped up there, too, a few months ago... and it also involved printing problems with Adobe Reader. I contacted Adobe, and they sent me a patch which fixed it. I will contact Adobe again if need be, although I thought I'd start here first to see if it was a common enough problem that someone might be able to provide a free and routine answer.
Richard
Date: Tue, 15 Jun 2010 20:10:13 -0600
From: [email protected]
To: [email protected]
Subject: Printing problems with InDesign CS3 with Mac OS 10.6.3
I neglected to ask what version of indesign CS3 you are using. I also
notice that Mac OSX 10.6.4 has just been released. It actually
addresses some CS3-specific issues, though they seem to be related to
launching the apps, not printing. It may be worth trying to update,
nonetheless.
Peter Truskier
Premedia Systems, Inc.
510-655-4454
>

I am having problem with Photoshop CS3 hanging

I am having a lot of problems with Photoshop CS3 hanging and crashing. Particularly when I open hi-res photos and click on tools, like the type tool. Is anyone else experiencing this problem? Any suggestions on how to fix the problem?
Thanks.

Buy more RAM, plain and simple. Sounds the program is severely suffocating. for on-screen display fonts need also be rasterized, which also costs RAM, even if they otherwise remain native vectors. How much memory do you have? as a short term solution, you may wish to increase the program's RAM usage in the prefs, but it may not resolve the issues entirely.
Mylenium

Strange problem when opening word doc situated in WLS virtual dir

Hi all,
we have a strange problem when opening word doc
situated in C:\Oracle\Middleware\as_1\forms\webutil
we put some word docs there and tried to open from forms using for example web.show_document('http://wp0606:9001/forms/webutil/mug00103.doc', '_blank');
no problem using FF, however in IE8 the word doc is shown in its binary format, this also happens when we try to open the doc in IE8
however when we google and search for instance for a test.doc and then click on this url a file save dialog is shown
that's why we believe that this might be due to a configuration issue of WLS
any help would be greatly appreciated
Kr
Martin

I think you have 2 ways to go here. Figure out what html is from wherever weblogic gets it, meaning you have to delve into the docs, snoop
around in directories and find what it must be sending (This is going to be unavoidable if you are going to change what weblogic is doing.
Sooner or later you have to try to figure out where it gets this stuff from)
or
you can experimentally snoop on your url with a tool like wget or curl. These are fundamental web tools.
The latter is always a useful thing to be able to do. (you need to formulate a query to get the content-type).
Whoever managed to get weblogic to serve any files in the first place probably can figure this out.

I have had a trial version of Acrobat X1 Pro - I have decided not to buy at this stage - for some time it has been conflicting with opening PDF docs after saving as from word 2007 - I uninstalled Pro X1 and now when I save as from word 2007 to PDF it will

Can anyone help with this - do I have to uninstall Reader and then reinstall?

I have had a trial version of Acrobat X1 Pro - I have decided not to buy at this stage - for some time it has been conflicting with opening PDF docs after "saving as" from word 2007 - I uninstalled Pro X1 and now when I "save as" PDF from word 2007 to PDF it will save the document as a PDF but will not open the document to display after publishing - I have to got to where the file has been saved to view the new PDF document - this is really annoying - do I have to delete adobe reader and reinstall it - adobe needs to look at this conflict with acrobat pro as I have even gone it to properties and tried to have adobe reader as the default PDF program - the main issue is that I cannot view the PDF after publishing it from word 2007

Problem with opening of PDF in my webmail application

I have a problem with opening a pdf file in my webmail application of my internet provider in apple safari since yesterday. When I wanted to open up a pdf file I got a pop up message to allow a connection between adobe and the webmail application which I did. Since then I can not open up a pdf file. If I go to another browser or if I use email from another internet provider I use too it works and I can open up. It seems to be a blockage of the specific combination of this webmail application and safari.
What can I do ?

Hi,
I have same requirement.
I need to cnvert smartform->pdf->send mail.
The mail is send but the attachment is corrupted.
Can you tell me what code you have written so its working in developement?

Problem with opening a indd file in CC 2014.

When I'm trying to open a 5.5 .indd-file in CC 2014 on my Windows computer, I get this error message: 'Either the file does not exist or you do not have permission to open it or the file is used by another program'. However my collague has no problem with opening the document on his Mac computer. I guess it has something to do with a kind of setting in my CC 2014. Can anyone help me?

Nothing to do with ID. It really means what it says - your file permissions are hosed and it being an ID file this could include things like fonts or placed images referenced within it.
Mylenium

F-32 : Problem with Open Item selection

Hi,
We have a strange problem with open Item selection for customer clearing in t-code F-32
In My QA system
if I input spl GL indicator ="*" and uncheck Normal OI tick,
the system selects all open items,
(those with spl GL indicator and those without spl GL indicator)
In My Dev system
If I input spl GL indicator ="*" and uncheck Normal OI tick
the system does not select any open items,
Please let me know which setting controls this behaviour ?
Regards
Sachin

Hello,
Check your data in FBL5N for the option "Special GL Transactions". There could be that there is no data in the system with SPECIAL GL TRANSACTIONS.
In F-32, there is no value like *
You need to input right Special GL Indicator. "*" will not work here.
I am sure in both the systems if you put "*" and UNTICK your normal transaction, you will NOT get any items to clear.
Please DOUBLE CHECK whether you have unticked normal transaction.
Regards,
Ravi

Problems with opening CS3 doc in CS5 (stroke added, etc.)

Similar Messages

Maybe you are looking for