Problems with OPMN process (very unstable) on Windows Vista

I am running SOA on Windows Vista(V10.1.3.1). I am having the following problems with the OPMN process
 
1) Shuts down when idle
 
2) After crashing I try to restart SOA Suite using the command line>opmnctl startall
 
I get the error message..."Unable to Open Service with error Access is denied."
 
If I use the command line>opmnctl start
 I get the error message but OPMN process starts????
 
3) but then...Crashes when trying to Deploy a webservice through Application Server Control.
 
Anyone else having these sort of issues and have come across a fix?
 
regards
 
Paul P

I'm also having the same problem (on XP) on 10.1.3.4 I'm guessing this is a security issue but can anyone tell me how this can be resolved.
It appears to work fine as Admin but regular users without Admin rights have the above issue.

Similar Messages

Installing AS: special problem with OPMN Process Manager...

Hi everybody,
Actually, i'm trying to install a Grig control 10.2.0.1 on an existing database (10.2.0.1 patched to 10.2.0.4). OS is RHEL5.
I have the following problem during setup IAS for 3 days.
Note that my database is open and that didn't succeed in installing some rpm's, especially pdksh...
Here is the warning box:
The OPMN Process Manager failed to start.
Please check the logs in the
/u00/app/oracle/product/10.2.0/oms10g/opmn/logs directory for the cause of failue. Once the cause of the failure has been remedied, start OPMN manually and click Retry.
I start manually opmn and obtain this:
Processes in Instance: EnterpriseManager0.vmbasegrid
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
DSA | DSA | 6106 | Alive
HTTP_Server | HTTP_Server | 5955 | Alive
LogLoader | logloaderd | 6137 | Alive
dcm-daemon | dcm-daemon | 6189 | Alive
OC4J | home | 5962 | Alive
WebCache | WebCache | 5982 | Alive
WebCache | WebCacheAdmin | 5963 | Alive
But after clicking on retry, the same warning appears again!
By watching logs for each process at $ORACLE_HOME/opmn/logs, i didn't se any errors
moreover opmn.log is empty.
I already set $ORACLE_HOME, $PATH, $LD_LIBRARY_PATH.
I didn't find solutions nowhere so that's why I'm posting here.
Ideas and direction will be very helpful for me.
Thank you a lot,
Daniel.

Hi,
Thank your for answering.
Actually, i don't have this issues anymore, because I choice to intall this on RHEL4.6.
My DSA process was started because, i started it manually to see what will happen.
Now I succeeded for the installation, I have a new probleme during the configuration with OUI CA.
The OMS configuration failed and the file configToolFailedCommands show that:
oracle.sysman.emcp.agent.AgentPlugin failed.
Have you any idea ?

Installing Grid console: special problem with OPMN Process Manager...

Hi everybody,
Actually, i'm trying to install a Grig control 10.2.0.1 on an existing database (10.2.0.1 patched to 10.2.0.4). OS is RHEL5.
I have the following problem during for 3 days.
Note that my database is open and that didn't succeed in installing some rpm's, especially pdksh...
Here is the warning box:
The OPMN Process Manager failed to start.
Please check the logs in the
/u00/app/oracle/product/10.2.0/oms10g/opmn/logs directory for the cause of failue. Once the cause of the failure has been remedied, start OPMN manually and click Retry.
I start manually opmn and obtain this:
Processes in Instance: EnterpriseManager0.vmbasegrid
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
DSA | DSA | 6106 | Alive
HTTP_Server | HTTP_Server | 5955 | Alive
LogLoader | logloaderd | 6137 | Alive
dcm-daemon | dcm-daemon | 6189 | Alive
OC4J | home | 5962 | Alive
WebCache | WebCache | 5982 | Alive
WebCache | WebCacheAdmin | 5963 | Alive
But after clicking on retry, the same warning appears again!
By watching logs for each process at $ORACLE_HOME/opmn/logs, i didn't se any errors
moreover opmn.log is empty.
I already set $ORACLE_HOME, $PATH, $LD_LIBRARY_PATH.
I didn't find solutions nowhere so that's why I'm posting here.
Ideas and direction will be very helpful for me.
Thank you a lot,
Daniel.

Please paste the install action log for this install

Problems with iTunes and iPod running under Windows Vista

I recently changed my computer. I now have an HP Pavilion running windows Vista (use to have XP). I have a video iPod -30GB. I downloaded iTunes onto the new equipment without incident, but that is the last thing that went smoothly.
I can no longer watch TV shows or movies from iTunes. The video plays like a slide show of stills (the audio is real-time however). Eventually I will get an error message from Windows and it closes the application.
I am also having issues with syncing my iPod and computer. I get a message requiring me to delete all of the content of the iPod and replace it with the contents of iTunes. I haven't done this -no trust and no backup
The delete message is from iTunes. I suspect it is a security feature to prevent downloading to more than one iPod, as iTunes doesn't seem to 'know' my iPod anymore. Syncing has also caused iTunes to close and my computer to reboot. Has anyone else had these problems?
HP Pavilion Windows Vista

you may want to take a look at the iPod 101 tutorials. Those might help.
Regards.
< Edited by Host >

Compatibility problem with USMT 6.3.9600 and Windows Vista

Hi,
We have a problem with USMT 6.3.9600 ()ADK 8.1) while running on Vista. At start we are receiving an error saying it is not a win32 application. USMT 6.2.9200 would work on Vista but not on Windows 8.1.
Any workaround?

For an example with multiple USMT versions, see:
http://blogs.technet.com/b/configmgrteam/archive/2013/09/12/how-to-migrate-user-data-from-win-xp-to-win-8-1-with-system-center-2012-r2-configmgr.aspx
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Problems with the installation of iTunes on Windows Vista

When I download any version of itunes error occurs' Microsoft.VC80.CRT, Version =8.0.50727.4053'',''type =''win32'',''1fc8b3b9 ... publicKeyToken = Architecture =''or86''. Please refer to Help and Support for more information. HRESULT: 0x800736FD'. How can I solve this problem?

HRESULT: 0x800736FD
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 800736FD, or some other number? (If they're another number, what number are you getting?)

Problem with css processing in Firefox8 on Win7.

Hi guys. I have a problem with css processing in Firefox8 on Win7. I need to make div which width and left css properties should be dynamically changed. Inside this div i have an swf object. When i change width and left css styles for my div, it jumps on the page, but other browsers render that well. What can you suggest to fix this problem? Thanks

A good place to ask advice about web development is at the mozillaZine Web Development/Standards Evangelism forum. 
The helpers at that forum are more knowledgeable about web development issues. 
You need to register at the mozillaZine forum site in order to post at that forum. 
See http://forums.mozillazine.org/viewforum.php?f=25

Solution Center problem with HP Office Jet J4550 and windows 7 (64bit)

Hello All,
I have a problem. I have the Solution Center and a HP Office Jet J4550 and windows 7 (64bit). When ever I open the solution center, the solution center says " HP office jet J4550 series disconnected" When I open HP document manager, I can access the printer. Additionally, when I run the HP Print Diagnostic Utility 4.0, it sees the printer, no issues. I can print test pages. No issues. I downloaded the latest driver from the HP site (OJJ4500_Full_13, 299,359KB) Your insight is appreciated.
Thank you
Roy B

I have a similar problem with the J4580 and my new Windows 7 64-bit laptop. HP Solution Center says that the printer is disconnected. Furthermore, it can print some documents (short ones), but it was unable to print a 1-page 5MB pdf file. The printer truncated the page after printing just the top 10%. The printer is OK with my wife's Windows 7 32-bit laptop.
I've seen many other people complain about similar problems in this and other forums. Apparently the driver for J4500 printers is not compatible with Windows 7 64-bit. Can HP please provide an updated driver or patch?

Problem with two monitors while using Photoshop, windows move from 2nd screen to 1st screen.

Problem with two monitors while using Photoshop, windows move from 2nd screen to 1st screen.
I saved a new workspace and it did not help.
No problem before I went to Maverick.

I found the fix, go to System Preferences and open Mission Control and uncheck the box to keep monitors as they were (When switching to an application...........)

Problem with XSQLRequest.process

Problem with XSQLRequest.process:
I'm trying to run XSQL files using XSQLRequest.process. I'm working on the chapter 3 examples in Muench's book and got FAQXML.xsql running okay but have had problems with: FAQhtml.xsql BTW I am calling them from a different directory and am using 9iAS under win2K SP3.:
I've fixed errors such as:
End tag does not match start tag 'img'.
by adding </img>
and:
End tag does not match start tag 'META'.
by removing the <head> section from the xsl.
But now i've got:
XML parse error at line 2, char 1
Expected 'EOF'.
and don't have a clue.
Some questions I have are:
--Why don't I get these errors when I run the same files from Internet Explorer?
--Where is the intermediate XML file?
--How will I get HTML output?
I'd appreciate any help you could suggest.
Peter.
Here is the .xsql and some of the .xsl:
<?xml version="1.0"?>

<?xml-stylesheet type="text/xsl" href="http://localhost/ch03/FAQ-In-HTML.xsl"?>
<xsql:include-xsql href="FAQ.xsql" xmlns:xsql="urn:oracle-xsql"/>

<html xsl:version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
-->
<body>
<center>
<table border="0">
<tr>
<th>Question</th>
<th>Difficulty</th>
</tr>
<xsl:for-each select="ROWSET/ROW">
<tr>
<td>
<table border="0" cellspacing="0">
etc...

XSQL version is 1.0.2.0.
Well, in answer to your import question, yes. Xerces can import Xerces documents properly. Thus if we use Xerces importNode on a document parsed/created using Xerces' DOM implementation, the attribute values stay.
We are using Xerces because it is the foundation of our infrastructure layer (which is partly because it's used in Catalina).
Question. Is it possible that XSQLParserHelper which, as you say, uses an instance of oracle.xml.parser.v2.DOMParser to parse the document, is having trouble with different versions of DOM? I ask because we've noticed that to use Catalina and have its class loader to function successfully, we had strip all the DOM classes from xmlparserv2.jar
importNode snippit ...
public void service(CioServletRequest req, CioServletResponse resp) throws ServletException {
DomResponse respm = resp.createDomResponse();
Document dbdoc = respm.getDocument();
XSQLRequest req = new XSQLRequest( pageUrl );
ByteArrayOutputStream ostream = new ByteArrayOutputStream();
req.process(params, ostream, new PrintWriter(System.err));
String s = new String(ostream.toByteArray());
Document retDoc = respm.parseDocument(s);
dbdoc.appendChild(dbdoc.importNode(retDoc.getDocumentElement(), true));
Hope this helps.
Steve.
null

Problem with a process chain transport

Hi all,
I have a problem with a process chain transport, I transport it but when I see the changes in testing environment I dont see it, I did it four times but nothing happen and I dont have errors.
Can anybody tell me how to transport a process chain.
Thanks.

Hi Federico,
When you tranport Process Chains, initially chains will be available under "Not Asigned" node in RSPC Transaction. The transported chains wont be get highlighted automatically. Manually need to open the chain in update mode and activate it on Quality.
Hope it will help you to resolve the problem.
Regards,
Raji

Problem with AND process in daily running process chain

Dear Friends,
I am currently I am facing problem with AND process. In my daily running process chain, daily the process chain is failing at AND process. Currently I am workaround and manually repairing the AND process and loading the data with below (link) steps.
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
I need permanent solution for this reoccurring problem. Kindly share your thoughts and ideas to resolve this problem.

Hi,
The below are the job log. After this the batch job is failing.
Job log overview for job: BI_PROCESS_AND
Job started
Step 001 started (program RSPROCESS, variant &0000000190315, user ID MAESTRO)
This AND process is not waiting for event RSPROCESS, parameter 475P4YTXTIIOA6IQ9GAZVEP24
Job cancelled after system exception ERROR_MESSAGE

Trying to connect my replacement Iphone 3GS to my windows 7 laptop but it is not recognised at all, my ipod can connect no problem, my iphone can connect to my windows vista computer no problem. Any ideas?

Trying to connect my replacement Iphone 3GS to my windows 7 laptop but it is not recognised at all, my ipod can connect no problem, my iphone can connect to my windows vista computer no problem. Any ideas?

More info,
I have bootcamp with Windows 7 installed, do I need to run some "Driver compatibility checker" after the Windows 7install?
if so what is the name of it?
thanks

Having trouble with iCloud Photo Stream on a Windows Vista 64 machine.

Having trouble with iCloud Photo Stream on a Windows Vista 64 machine. Can you tell me why Photo Stream will not stay enabled. When I reboot, it will disable not to mention that it will not get any pushed photos. Is there a 64 bit version?

Hello tw_mama,
I was looking into the issue you are experiencing and found an article that may shed some light on the subject. It's called iCloud: Account troubleshooting found here: http://support.apple.com/kb/TS3988
This section in particluar:
I get an "Unsupported Apple ID" error when I try to sign in to iCloud from my iPhone, iPad or iPod touch.
Depending on how you created your Apple ID, you may not be able to create an iCloud account with your current Apple ID. If your Apple ID works in the iTunes Store, App Store, Game Center, FaceTime, or with other Apple Services, your Apple ID should work for iCloud. Also, if you created your Apple ID while you applied for a job at jobs.apple.com, your Apple ID should work for iCloud. If you cannot use your Apple ID with any Apple Services, it might not be compatible with iCloud. Contact iCloud Support for assistance.
All the best,
Sterling

"iTunes 7.6 or later is supported with any 64-bit edition of Windows Vista.

"iTunes 7.6 or later is supported with any 64-bit edition of Windows Vista. The installer for 64-bit Vista is named iTunes64Setup.exe instead of iTunesSetup.exe. For more information see http://docs.info.apple.com/article.html?artnum=301301"
So now you iPod Shuffles will work! No more returning them to Apple!

I can now setup iTunes on my 64 bit Windows Vista. I've also brought over my library via the home network from my old Windows XP computer (although I needed to use Add folder to Library as the songs were not automatically recognised in the library). However, I can't get the i-Pod to load. At first I got a message saying that I needed to download a driver and now there is no recognition of the iPod at all when I connect. Is there anything I can do?

Problems with OPMN process (very unstable) on Windows Vista

Similar Messages

Maybe you are looking for