Problems with OS Mavericks
Problems with Maverick - I select "Sleep"; it goes into sleep but then comes out of it; I select "Shut Down"; screen goes black but then a couple of seconds later, system reboots. It was not doing this before installing Maverick.
This is always due to a process keeping the system awake, but determining which is the challenge.
Active Spotlight indexing will prevent sleep. Wait for it to complete. Upgrading OS X may require several hours or more for Spotlight to complete.
When Spotlight finishes and it still will not sleep or remain in sleep:
A first simple step is to create a new, temporary user account. Log out of yours and log into the temporary one. Determine if it sleeps then. If it does then you have a login item that is preventing sleep. System Preferences > Users & Groups > Login Items.
Whenever you suspect a problem related to power, including sleep, an SMC reset is also recommended.
Check your Sharing preferences for anything that could permit an active network connection.
Energy Saver "Wake for network access" can prevent sleep, but unchecking it will prevent the ability to remotely access a sleeping Mac over a network. A normally functioning Mac will sleep according to Energy Saver, but will wake periodically for network access, after which it will return to sleep according to the settings in Energy Saver.
Unfinished print jobs will prevent sleep. If a print job is queued, but if the printer is off or the connection to it is lost, the Mac will stay awake forever waiting for the printer to return.
Safari pages that periodically refresh themselves are very common. This will prevent sleep.
Frequently checking for new mail may prevent sleep. Change Mail's preferences to check for new mail less frequently.
iTunes and iPhoto sharing will prevent sleep.
Active Bluetooth devices will prevent sleep.
Active USB devices will prevent sleep.
Using Time Machine over a network can prevent sleep.
There are plenty of third party utilities designed to prevent sleep. One may not have been completely uninstalled.
Quit the process with the name powerd in Activity Monitor. It will re-launch on its own.
Any number of "anti-virus" utilities can prevent sleep, along with other miseries. Get rid of them.
Read Mac OS X: Why your Mac might not sleep or stay in sleep mode
Similar Messages
-
MM-1 (Bower&Wilkins) USB speakers problems with OS Mavericks
Hi,
I use USB speakers, rather fine ones. MM-1 (Bower&Wilkins)
With Mountain Lion, everything was good. Ever since I switched to Mavericks, I have all sorts of problem with them.
In lin- in mode, everything is ok, but in USB mode:
I loose all audio sometimes when switching apps, or or for example, starting a video when music is playing from Rdio streaming.
A loud «pop» or "click" sound occurs in the left speaker when a video or a sound «initializes». e.g. opening a web page with a video in it.
Changing the audio out back and forth from USB to "internal speaker" sometimes bring sound back, but most of the time, only a restart will do.
Or to make everything explode:
Play music in Rdio, open Safari, launch a YouTube video, toggle multiple times between full screen and normal mode, then BOOM loose All audio until restarting the Mac.
Thank you!Hi,
I use USB speakers, rather fine ones. MM-1 (Bower&Wilkins)
With Mountain Lion, everything was good. Ever since I switched to Mavericks, I have all sorts of problem with them.
In lin- in mode, everything is ok, but in USB mode:
I loose all audio sometimes when switching apps, or or for example, starting a video when music is playing from Rdio streaming.
A loud «pop» or "click" sound occurs in the left speaker when a video or a sound «initializes». e.g. opening a web page with a video in it.
Changing the audio out back and forth from USB to "internal speaker" sometimes bring sound back, but most of the time, only a restart will do.
Or to make everything explode:
Play music in Rdio, open Safari, launch a YouTube video, toggle multiple times between full screen and normal mode, then BOOM loose All audio until restarting the Mac.
Thank you! -
I download the new OS Mavrick two days ago.
Since, I have problems with mailbox, first, and the laptop turns off sometimes (last one, with 55% battery).
Has anybody idea of what is happening?
Thanks,
JeanApple doesn't seem to know how to "fix what's wrong".
I spent about an hour yesterday with Apple Tech Support. No solution.
I had a mbp running Mountain Lion and iPhoto 8.1.2. Perfect harmony.,
I purchased a new mbp from Apple, running Mavericks. It has iPhoto 9.5.1 on it.
When I started up iPhoto, it told me that my previous iPhoto library was not compatible and that I needed to "upgrade my iPhoto database"
I click on that link, and iPhoto stops responding.
Tech support walked me through various attempts at solving this problem, but all attempts failed.
After about an hour, neither the original tech nor the supervisor who took over had figured out what to do.
They told me that, as a last resort, they could save the photos in my old library and be able to use them with iPhoto 9.5.1, but I would lose all the organization (albums, folders). How is that acceptable, Apple? It's a big deal to me. They kept telling me that this was a very unusual case, but if you google "mavericks iphoto problem" you'll see lots of other people having Mavericks/iPhoto issues. They told me that I had a corrupted iPhoto database, but that database works just fine in Mountain Lion with iPhoto 8.1.2.
Supervisor is supposed to call me Sunday afternoon to follow up on this .... -
Problems with OSX Mavericks - How do I return to previous operating system?
I installed OS X Mavericks on my iMac. Now Safari, Mail, iPhoto, basically all software, hangs up as soon as it is opened. Nothing runs.
Also I have this constant request for keychain password which I haven't set up. I tried the fix I found online, but as soon as I click on "mail preferences" Mail hangs up and I have to force quit the program.
I have re-installed this software 3 times now. It has not functioned properly yet. Thank goodness Firefox still works.
Any solutions out there?Apple doesn't seem to know how to "fix what's wrong".
I spent about an hour yesterday with Apple Tech Support. No solution.
I had a mbp running Mountain Lion and iPhoto 8.1.2. Perfect harmony.,
I purchased a new mbp from Apple, running Mavericks. It has iPhoto 9.5.1 on it.
When I started up iPhoto, it told me that my previous iPhoto library was not compatible and that I needed to "upgrade my iPhoto database"
I click on that link, and iPhoto stops responding.
Tech support walked me through various attempts at solving this problem, but all attempts failed.
After about an hour, neither the original tech nor the supervisor who took over had figured out what to do.
They told me that, as a last resort, they could save the photos in my old library and be able to use them with iPhoto 9.5.1, but I would lose all the organization (albums, folders). How is that acceptable, Apple? It's a big deal to me. They kept telling me that this was a very unusual case, but if you google "mavericks iphoto problem" you'll see lots of other people having Mavericks/iPhoto issues. They told me that I had a corrupted iPhoto database, but that database works just fine in Mountain Lion with iPhoto 8.1.2.
Supervisor is supposed to call me Sunday afternoon to follow up on this .... -
Webmail problems with osx mavericks
hi,
since upgrading to mavericks i have problems using my work microsoft webmail on both safari and chrome – on chrome the pop-up window to add attachments no longer works; on safari it barely works (i have to open the attachment pop up twice before i can upload an attachment), where it also keeps crashing. outlook webmail light is not an option...i just want to get my outlook webmail to how it was before with mountain lion!
please can anyone assist?We've been expereincing a similar thing:
first attempt brings up a standard looking OS X file choosing dialog box which does nothing after you pick a file
the 2nd attempt brings up the expected OWA attachment chooser dialog box and we can then attach normally
We've told our users to switch to Firefox/Chrome (or enjoy attaching things twice).
Have you seen any solutions? -
Problems with OSX Mavericks after security update 23 april 2014
So I ve just updated the latest security update of osx mavericks and i get a really annoying problem. My system went so slow for example when I switch fullscreen a window or back from fullscreen and the effect of apps when I open them it is slow aswell. These things are recogniseable in Safari too so I am not able to use my mac like before. Please help me find out what should I do.
Activity Monitor - Mavericks
Activity Monitor in Mavericks has significant changes
Performance Guide
Why is my computer slow
Why your Mac runs slower than it should
Slow Mac After Mavericks
Things you can do to resolve slowdowns see post by Kappy -
Display problems with new Mavericks in Keynote.
I installed Mavericks. Can not see Keynote display on projectors at church. Connected to system with hdmi cable. Any thoughts?
The +Help & Terms of Use+ link over the right has instructions for including images.
Did you try resetting PRAM?
http://support.apple.com/kb/HT1379
If that does not help, try resetting the SMC (power management) by precisely following this procedure.
http://support.apple.com/kb/HT1543
(Basically unplugging all the cables from your iMac, including power, and reconnecting.) -
Problem with install Mavericks
I have installed update flash-storage, but when i wanna to instal mavericks, he request me again to install update flash-storage for macbook air. And so on ad infinitum
I don't know what can i do
Will not install until i put the firmware flash-storage updateThe following may or may not help. There have been several situations where the firmware update reports successfully completing when it has not. The following contains some more info: https://discussions.apple.com/thread/5463629?tstart=210
-
A sign in problem with OSX Mavericks
Every time I start the computer I have to sign in again. I do not need this protection and how can I change this to what I had before?
I was a a little too hasty. Several times after your latest, I had to go back to reenter the info I entered since the computer make me sign in to start again. (this even after I relocked the changes.) Then another problem arose. I always just put the Mac to sleep and don't completely turn it off. For the last two times I cannot get it to wake up and have to shut it off and start all over again. I now wish I never downloaded this new OSX.
Any ideas about this? -
As mentioned above I have just downloaded OSX Maverick to my iMac. I am now having a lot of problems with iCloud. I get the message that "This iMac can't connect to iCloud because of a problem with, and then it goes on to quote my e-mail address. It then says to open iCloud preferences to fix this problem.
I do this and no matter what I seem to do this message continues to return.
Can anybody explain how to resolve this problem (please bear in mind that I am noy very computer literate).
Many thanks
MikeHello John
Sorry I haven't got back to you sooner.
Thanks very much for your help, your solution solved my problem.
Thanks again and kind regards
Mike -
Problem with replies in Maverick's mail. Originating emails send fine. When replying to an email (various addresses) the reply is hung up and can not be sent. Option becomes put in draft, delete, etc. Any suggestions would be helpful. Mid 2013 iMac.
I don't know how rare this is. I went a week or so without a problem, and now it's starting to recur. Also, in some instances, an email will look unsent (remain in the outbox on the Treo), but it has been sent, and recipients are replying while I'm trying to figure out what is going on. Further, it will send the same email over and over during this madness.
This is a show stopper. If there isn't a software fix soon, I may chuck this phone in the garbage.
Post relates to: Treo 800w (Sprint)
UPDATE: The problem comes and goes. The next day, no changes to the treo, everything workeds. Now i'm suspecting the sprint server, and how it/the phone responds from failing to send while roaming. I've since turned off roaming, and haven't had a problem for several days.
Message Edited by slrichardson on 12-22-2008 01:12 PM -
Anyone having a problem with iDVD in Mavericks 10.9.3? When previewing a slideshow all color is lost after the first image.
Is your problem with iMovie as the title suggests or with iDVD?
-
Problem with maps in Mavericks on iMac
I have a problem with my Maps on Mavericks.
I can open it just fine, no crash or whatever but the map itself just won't load, whatever mode it is on. Here is the screenshot of my Maps:
As you can see, it just stays blank all the time.
I'm also running Parallels 9 and don't know if that has something to do with problem.Spent days trying various fixes, but this is the one that did it for me. Thanks!
livetowin
Re: Problem with maps in Mavericks on iMac
Dec 8, 2013 7:14 PM (in response to robin1943)
Try this
Since my date and time were incorrect and imessage was not working as well, I tried this
1. Go to system preferences and click date and time
2. Select date and time tab
3. Uncheck "set date and time automatically" and manually enter the correct time
4. Go to time zone tab and uncheck the box there too
5. Go back to date and time tab and now check the box "set date and time automatically"
6. Then check the box in time zone as well
Now open maps and see if it works! -
I have stopped using Firefox as nothing I have done has fixed this problem. I have tried shutting down Firefox and rebooting it, I cleared all my add-ons and then added adblock back (that's the only one) but it still doesn't work. I've deleted large files so that I have more space - I can't think of anything else that will work. I have spoken to four of my friends with Macs and they are all having the same problem with Firefox since Mavericks.
Hi thanks very much for your reply. I did a few things like delete my add-ons and I don't have the problem of the disappearing cursor (sounds like a Sherlock Holmes story) any more but it seems to have been a mac issue as there were many complaints on the Apple forums of the cursor disappearing since the Mavericks OS and not just in Firefox but in multiple programs. Looks like they've fixed it somehow!
-
Wifi problem with Mac after upgrade to Mavericks
I just upgraded to Mavericks but something wrong with my wifi.
i can get internet through LAN link from Airport but not through wifi even i can receive an IP address
i tried connect to hotspot with my iphone5s and it works.
Other devices can use wifi just fine through Airport, just not my Mac using Mavericks
In conclusion,
Airport should be fine because my other devices works.
Mac wifi should be fine too because i can connect using hotspot.
so why it's not working when i connect Mac to Airport?I was having problems connecting to Wifi with my Macbook Pro (!2010), after upgrading to Mavericks. I was on the phone repeateadly with AT&T because I have Uverse. Testing everything (channels, signal strength) and had techs come out to check the line, ports, switches, etc. When I hardwired the Mac into the Uverse router, it worked fine. This rulled out any problems with the line in.
I considered getting a repeater but then I read that repeaters are not really good and it is better to reconfigure a router to act as an access point on the network. Plunked down about $80 for a Belkin AC750 router at Best Buy. In the setup it has an option to set it up as an access point only. Clicked that, connected it to my Motorola NVG510 Uverse modem and then connected to the Belkin router from my Mac. Voila! It's been a solid 11+ Mbs ever since (my plan maxes at 12Mbs). Connection is still solid and life if good even though it ***** to plunk down another $80 for a second router. But it was worth it just to get rid of the headaches.
I think the wifi capabilities of the Motorola NVG510 modem are the cause of a lot of problems with AT&T Uverse issues, particularly for Mac owners. I think it was also causing my Airport Expresses to drop occasionally.... Few minutes of music then drop... music drop.... All gone now.
I don't know if you are on Uverse but if so, I highly recommend configuring a second router as an acces point (it can be any old router you still might have - the setup is just a bit trickier because you have to do it manually).
Good luck.
Maybe you are looking for
-
How can I restart a mac pro that shows only a grey screen with a spinning wheel. I reinstalled snow leopard (10.6.3) over 10.6.8 because apple genious people said I had problems with my library files after a time capsule crash. I reinstalled but when
-
Fetch GLPCA-SPRCTR instead of csks-PRCTR - Urgent
Hi All, i have a report which dispalys a column profit center (CSKS-PRCTR). My functional wants to replace this field (CSKS-PRCTR) with GLPCA-SPRCTR. I tried with various option but not successful. Any help would be highly appreciated. Thanks, Senthi
-
What is the function module which uploads excel file data into tcodes
Hi, i want to upload data in cs01 tcode. but data is excel sheet while i am trying to use gui_upload it is not being possible for me to upload data. can any one tell me what is the function module? can any send me the steps how to uplaod data if it i
-
Why can i not pull firefox up as my web browser
when i click the icon it want pull up and i just downloaded it
-
Character Viewer - Emoji not working
I'd like to add a Smiley Face Emoticon to my Pages document. So far I've clicked on Character Viewer and found Smiley's under Emoji, but when I double click a Smiley the cursor advances forward, but no Smiley Face in my document. What am I missing? I