Problems with Outlook and 365

Hi BarbBouchard,
I can fully understand how you feel when you made several calls to Godaddy and Microsoft but no one resolved the issue.
I think the Go-daddy support sent you to Microsoft since they identified it as a pure Outlook desktop client side issue and it is not related to the Office 365 service provided by them. While the Microsoft support sent you to Go-daddy since they identified
it as a pure server side issue and let you contact Go-daddy to check the Office 365 service.
However, according to your description, I cannot identify the root cause via the limited information yet. BarbBouchard, let's work together to narrow down whether the issue is related to client side or server side. Here are some tips for you:
1. Check if you cannot send or receive emails on both Outlook desktop client and . I can send and recieve emails on OWA but not from my outlook desktop.
2. Check if this issue occur to all Office 365 user accounts or only one user account. There are two users on this account and we both had the problem as described here. The second user has not expeireinced this issue since turning
off the automatic updates in options. I did not do that on my desktop and it seems that this problem occurs after an update has been started. There is a message that says update in process. This message never goes away.
3. Add the problematic account into another PC to check if the issue exists. I did not do this.
If the issue occurs on both Outlook desktop client and OWA, it might be related to the Office 365 account or server side. If so, you will need special assistance from Godady side. Since Office 365 plans purchased from Godady has some customize features and
they are different from the plans directly purchased from Microsoft website.
If the issue only occurs to specific user and Outlook desktop client, the cause may lie in the Outlook desktop client side. As I know it, we have a group which is dedicated handling Outlook client related issue. To provide you with further assistance, it is
recommended you post this issue with detailed information such as symptom at the following Outlook forum:
Microsoft TechNet Office forums:
Your time and patience are highly appreciated.
Best regards,
Chris Ni

Hi,
Thanks for your question. As per the description, I understand that you're not able to send and recieve emails from your Outlook client.
When you say "turn off the automatic updates in options", which setting exactly do you mean?
"There is a message that says update in process. This message never goes away." - Do you mean the Office client update process or the message on Outlook status bar while Outlook updating your mailbox?
As suggested in above email, please try to add the problematic account into another Outlook client which doesn't have this issue, and verify result.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Similar Messages

Problems with outlook and address book contacts: my outlook contacts had around 3,000 entries. Outlook duplicated by itself and now outlook and address book have each over 340,000. What should I do?

Problems with outlook and address book contacts: my outlook contacts had around 3,000 entries. Outlook duplicated entries and have now 340,000. I reinstalled microsoft office and, thus, outlook, and reinstalled mac OS X system and applications. While I managed to delete outlook contacts so that I can re-sync with my blackberry, the contacts at Mac Address Book were not deleted and still have over 340,000 entries. I do not mind deleting all contacts since I have back up, but I have not been able to delete them. Also, when I go at Address Book and try to delete or merge duplicated entries, the system takes forever and never ends because of such large amount of entries. Worse, when I do so I run out of RAM memory.
My Macbook pro is just 2 months old.
What should I do? Is there a way to delete my Mac Address Book without having the problem above?
Many thanks
Regis

zlatan24 wrote:
For solving out troubles connected with corrupted or lost address book you may use address book recovery. It owns various features such as restoring wab files, it working under any Windows OS. The utility has modern and easy to use interface due to almost every experienced users.
If it is a windows problem it's not going to run on the OP's MacBook Pro

Sync Problem with Outlook and Blackberry Calendars

I am hoping someone has an "easy" solution to this problem.
I am using Desktop Sync (BIS) and synching it to my work Outlook 2007 mailbox.
Normally my calendar entries should sync to the Blackberry calendar associated with my work email address. Somehow, over the course of the past several days, some of my syncing was occuring with the the VZW Blackberry calendar. I didn't catch the problem in time and now I have work calendar entries correctly listed on my Blackberry, but in two different calendars.
I have since lost some of those entries originally created in Outlook. They are on the Blackberry, but on the wrong Calendar. When I sync with Desktop, the work entries on the VZW Calendar are not getting over to Outlook.
So the question is - is there a way to "move" the entries in one BB calendar, over to the other calendar? Thanks.

I would love to know the answer to this problem as well. I had the same problem even when I downgraded back to 5.0. It always worked fine before. Very Frustrating. To get around it clearing out all the settings on my handheld. I just have to click no every time it asks if I want to clear all databases on the phone before sync. It still syncs but doesn't change my settings. Annoying but works until they get this aggravation fixed.

Calendar syncing problems with outlook and iphone

Months and months ago I had the following window pop up when I go to sync my phone:
"synching with iphone will change more than XX% of your calendars"
First I have to say the vagueness of Apples messages is disappointing. This message does not convey to me exactly what its going to do if I accept the message. This is my first apple product and I love my iphone, but itunes and everything related to the PC is disappointing! Anyway, I have been hitting cancel because when I attempt to lookup the problem online in a Google search I don't find any quick definitive answers. I no longer use outlook on this computer, so I want all the calendar entries in the phone to remain the same. I've attempted to uncheck calendar syncing and get the following message:
"Itunes will no longer sync calendars to the Iphone. Would you like itunes to remove calendars previously synced to you iphone"
Once again, the infamous apple user friendliness I've heard so much about doesn't seam to be true! This message is so vague. What calendars is it going to remove, the ones on the pc or the phone? And why would it remove anything, I just want it to stop syncing. Urg, frustraded. Any help is appreciated! Thanks.

Originally all of Apple products were intended for use with Mac computers. Macs have default program - iCal to sync calendars. Windows default program is ironically Microsoft Outlook. There couple more options in iTunes for
calendar sync, but those need to be chosen and not default.
In your particular situation since you don't have outlook anymore, you don't need to make any changes. No outlook - no sync. Apple way - no user interference nessesary.
Please do remember that everyting I write is just my opinion, nothing more or less.

Email synchronization (Delete) problems with Outlook and Droid

A family member is having problems, especially deletion of email. She deletes email in Outlook or on her Droid, but it is not placed in the trash can in the web version, therefore it comes back or she runs out of storege space.
I use Hotmail mostly and all synchs well.

txc wrote:
A family member is having problems, especially deletion of email. She deletes email in Outlook or on her Droid, but it is not placed in the trash can in the web version, therefore it comes back or she runs out of storege space.
I use Hotmail mostly and all synchs well.
There's a setting within Outlook to delete messages from the server when you delete them from Outlook. She needs to check that box.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

Having email imap synchronization problems with outlook 365 proplus

Hello,
I have email imap synchronization problems with outlook 365 proplus.
If I sent emails , my sent items box does not synchronized.
This is really a bug, because I see more problems like this on internet.
Please make ASAP a solution , this is not professional
JMR

Hi JMR,
Assuming you are referring to Outlook 2013 by "outlook 365 proplus". This is actually because Outlook 2013’s IMAP implementation has changed when compared to previous versions of Outlook.
While configuring the IMAP account, Outlook will talk to the IMAP server for the correct folders first. If Outlook 2013 can’t find the correct folder for the Sent Items in your mail server, it will create a folder which doesn’t sync with the mail server.
To sync the Sent Items folder with IMAP server, we can try to root the mailbox:
Go to FILE->Account Settings->Account Settings…
Double click on your IMAP account.
Click More Options… button, then Advanced tab
Type "Inbox" as the "Root folder path"
Hope this helps.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

I have iphone 3gs ios 6.1.3 .. I have a problem I can not look contact profile and save it. I already sync with outlook and windows books also can not be seen. I tried to add a contact on the contact menu, but the result like restart ... (but not restart

I have iphone 3gs ios 6.1.3 .. I have a problem I can not look contact profile and save it. I already sync with outlook and windows books also can not be seen. I tried to add a contact on the contact menu, but the result like restart ... (but not restart the device, not just stored). I am confused about this issue ... please help ..
thank you in advance.

Your suggestion worked perfectly. I can't believe there is nothing in any of the instructions I have seen online at the Yahoo and Apple help sites about the making sure the right default account is checked. I don't think I was even aware there was a "default account" setting. Thank you so much.

Problem with Send and Receive Emal In SAP System

Hi gurus!
I have a following quote:
Dear !
I have a problem with send and receive email in SAP system following :
I want to test send and receive email in local network at my company. I
had two server
Server 1 : I setup Exchange Mail Server 2007 with domain controller is
fes.com
Server 2 : I setup SAP ERP ECC 6.0
On Server 1 : I created 2 account ( u1Afes.com and u2Afes.com ) and then I tested send and receive email between u1 and u2 in local network through Microsoft Outlook 2007 -> OK
and then
On Server 2: I had configured send and receive email on SAP system
through tcode SBWP, SCOT and SOST as Note 455140 - "Configuration of
e-mail, fax, paging or SMS using SMTP"
for example :
I logged in SAP system with user Basis01 (with email u1Afes.com ) -> then,using tcode SBWP -> new message -> send to u2Afes.com with Internet Mail type and then status message with green light -> sending ok
and then I have used Microsoft Outlook 2007, I logged with account u2 ->check email -> Ok. I saw message which send from u1
Finally, My problem is how can receive mail in SAP system without using Microsoft Outlook
For example:
Login system SAP with Basis01 account (with u1Afes.com ) -> tcode SBWP ->New Message -> send to u2Afes.com
and then
Login system SAP with Basis02 account (with u2Afes.com ) -> tcode ??? ->
To receive email from Basis01 (with u1Afes.com )
Please help me now
Thanks
I replace "@" with "A" because of banning email of this forum.
This quote is about sending email in local network. And we can't receive any email from the outside email address. Addition if I wanna send email to internal email in Internet (we've just tried with email address in local network) What should I config in SAP and Exchange ?
By the way, Is SAP Server IP added to Relay Agent for sending or receiving mail ?
Regards
An NLP
Edited by: An NLP on Apr 6, 2010 7:03 PM

Hi,
This problem is a classic problem of mail routing via Exchange. Exchange like most mail servers use the domain part of the email address as a means to route mails. So I will make an assumption that your main company mail addrss is "User @ fes.com".
So when you send a mail to the "User @ fes.com mail" address the mail is delivered to your Outlook mail address as this is the default route for company.
(Q) So how do you get your Exchange server to relay the mail into the sending SAP system?
(A) The easiest way would be to setup and unique mail domain for your SAP system. I always recommend "user @ client.sid.company.com" which in your case would be "u1 @ 100.PRD.fes.com". You can then instruct Exchange to send any emails addressed to 100.PRD.fes.com domain to your SAP system. Also using this format of address you can configure multiple mail connections into multiple SAP systems.
(A) Another answer would be to enter the "Full" email address (LOcal and Domain part of address) into the routing rule for Exchange e.g. "U1 @ fes.com" so that all emails addressed to this user will be delivered into SAP. However this method requires a lot of Admin as you will have to update Exchange with ALL email address that need to receive emails. Also if your corporate mail address is "U1 @ fes.com" then all mails will be forwarded to SAP.
I would definitely NOT recommend this method but the decision is up to you.
P.S. The IP address of the SAP system is entered into the mail header of the email. This is standard practice in SMTP relay. You can suppress this header in Exchange
Hope this helps
Michael

Problems with email and SMS after 1.3.5

Let me first say that I love the Pre. Up until this point it has been perfect - I have a replacement, but that is because I dropped it (wrong angle, wrong location, broken screen). However, following the 1.3.5 update I'm now having a fairly important problem with email and sms - I can receive email and messages, but not send them.
I have two email accounts. My personal account is with earthlink. My work account goes through an ISP using the domain name of my employer. I'm not using Microsoft Exchange or Outlook. I have tried deleting and reentering the accounts and that did not work. I can receive messages but get error messages when I try to send.
The same for messaging. I don't use it very often. But yesterday I get a text message and tried to respond and got the error message.
I power the phone off every night because I have a landline and use that as the primary phone at home.
I have been looking around message boards trying to find a fix for this. Has anyone had this issue and resolved it?
Thank you.
Post relates to: Pre p100eww (Sprint)
Message Edited by starburst42 on 01-05-2010 07:06 AM
This question was solved.
View Solution.

I forgot to add that this is a stock Pre. There are no patches or homebrew apps.
Edit:
I found a fix for the email problem, in posts on precentral and this board from a few months ago. The info came up in a Google search, and not searches of the boards, which is kind of frustrating. Here is the info, and the link. I really wish Palm would put info about this work around on their site, or at least make it easy for people to find. The solution is the last message in the thread linked below:
Had the same problem. Checked with Earthlink - no help. Checked with Sprint - no help. Checked with Palm - no help. Here is what finally worked:
Delete the earthlink account and start over. When you do - this is the key - set up the account manually! If you use the Pre defaults and try to change the settings it will not correct the problem. Your settings for outgoing mail must be:
"smtpauth.earthlink.net"
Use Authentication set to "on"
username is your email address
your email password
port set to "587"
encryption "none"
Again, the key is to set up manually.
smtp email fix
Message Edited by starburst42 on 01-06-2010 12:08 PM
Message Edited by starburst42 on 01-06-2010 12:09 PM

Sync problems with outlook 2007 calender

I am new in this type of comms.
BUT: I have a Palm Tungsten T5; have Palm Desktop 6.2.2 with the update for Windows7.
I have a sync problem with outlook 2007 calender; contacts, ToDo, memos all ok.
HotSynLog says: there are multi-day repeating records. [i knew that they do not sync, hence i deleted them PRIOR to syncing]
I found the listed records BUT either on dif days and they are "no timed" ones! and NOT multi-days ones.
I deleted them anyway - did a re-sync. With no different result. Still listed - though deleted and now non-existent.
Error code: OLERR: 03-000F (0xaf604005) and others - if this means anything.
Post relates to: Palm TX

Hello,
I receive email on my device from two addresses: 1) @sprint.blackberry.net and 2) @charter.net. When I was having problems similar to those you are experiencing, I had these two addresses listed under Default Services - Calendar (CICAl) - Messaging (CMIME). These addresses were @sprint.blacberry.net and @charter.net. Once I followed the steps previously referenced, only one email address(@sprint.blackberry.net) appeared under the (CICAI) and (CMMIE) default setting. Reference to @charter.net was removed. My syncs have worked correctly since then; however, I only two way synce with the device and Outlooks. I also continue to get emails from both addresses without a problem.
If you don't mind giving up the Yahoo calendar, I would do the same. If you want to continue using the Yahoo calendar, I'm guessing that it must be selected in the Default Services - Calendar (CICAI) before performing a sync. Likewise for your @sprint.blackberry.net address; it also must be selected in the Default Services prior to performing a device to Outlook sync.
I hope this helps.
Tres

Having problems with OSX and mail with the servers?

Having problems with OSX and the mail servers? Seems to be happening more and more?

Hello,
Who is your eMail provider, the part after the @ sign?
In Mail's Window Menu, choose Connection Doctor, any red dots for status, if so what is the message?
Then click the Show Details button & Check again.
Open Keychain Access in Utilities, use Keychain First Aid under the Keychain Menu item, then either check the Password under that item, change it, or delete it and start over.
You may have multiple entries.
Open Keychain Access in Utilities, enter the part after the @ sign in the search bar, hit enter
The Password rejection can confuse people since it's a catch all meaning...
This Password, Username, Authentication method... is not recognized on this Port to this Server, more than one entry in Keychain for each in/out entry, or a server end problem.
If using a browser to login via WebMail works it's not Name or Password, but one of the other ones.
The receiving email ports are:
IMAP is port 143
IMAP-SSL is port 993
POP is port 110
POP-SSL is port 995
Outgoing ports are...
SMTP and SMTP-SSL is on ports 25, 587 and 465. Port 587 has to be SSL, and port 465 is enforced TLS-wrapped and is generally used by Outlook users.

Problem with JFrame and busy/wait Cursor

Hi -- I'm trying to set a JFrame's cursor to be the busy cursor,
for the duration of some operation (usually just a few seconds).
I can get it to work in some situations, but not others.
Timing does seem to be an issue.
There are thousands of posts on the BugParade, but
in general Sun indicates this is not a bug. I just need
a work-around.
I've written a test program below to demonstrate the problem.
I have the problem on Solaris, running with both J2SE 1.3 and 1.4.
I have not tested on Windows yet.
When you run the following code, three JFrames will be opened,
each with the same 5 buttons. The first "F1" listens to its own
buttons, and works fine. The other two (F2 and F3) listen
to each other's buttons.
The "BUSY" button simply sets the cursor on its listener
to the busy cursor. The "DONE" button sets it to the
default cursor. These work fine.
The "SLEEP" button sets the cursor, sleeps for 3 seconds,
and sets it back. This does not work.
The "INVOKE LATER" button does the same thing,
except is uses invokeLater to sleep and set the
cursor back. This also does not work.
The "DELAY" button sleeps for 3 seconds (giving you
time to move the mouse into the other (listerner's)
window, and then it behaves just like the "SLEEP"
button. This works.
Any ideas would be appreciated, thanks.
-J
import java.awt.BorderLayout;
import java.awt.Cursor;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.SwingUtilities;
public class BusyFrameTest implements ActionListener
private static Cursor busy = Cursor.getPredefinedCursor (Cursor.WAIT_CURSOR);
private static Cursor done = Cursor.getDefaultCursor();
JFrame frame;
JButton[] buttons;
public BusyFrameTest (String title)
frame = new JFrame (title);
buttons = new JButton[5];
buttons[0] = new JButton ("BUSY");
buttons[1] = new JButton ("DONE");
buttons[2] = new JButton ("SLEEP");
buttons[3] = new JButton ("INVOKE LATER");
buttons[4] = new JButton ("DELAY");
JPanel buttonPanel = new JPanel();
for (int i = 0; i < buttons.length; i++)
buttonPanel.add (buttons);
frame.getContentPane().add (buttonPanel);
frame.pack();
frame.setVisible (true);
public void addListeners (ActionListener listener)
for (int i = 0; i < buttons.length; i++)
buttons[i].addActionListener (listener);
public void actionPerformed (ActionEvent e)
System.out.print (frame.getTitle() + ": " + e.getActionCommand());
if (e.getActionCommand().equals ("BUSY"))
frame.setCursor (busy);
else if (e.getActionCommand().equals ("DONE"))
frame.setCursor (done);
else if (e.getActionCommand().equals ("SLEEP"))
frame.setCursor (busy);
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (done);
System.out.print (" finished");
else if (e.getActionCommand().equals ("INVOKE LATER"))
frame.setCursor (busy);
SwingUtilities.invokeLater (thread);
else if (e.getActionCommand().equals ("DELAY"))
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (busy);
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (done);
System.out.print (" finished");
System.out.println();
Runnable thread = new Runnable()
public void run()
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (done);
System.out.println (" finished");
public static void main (String[] args)
BusyFrameTest f1 = new BusyFrameTest ("F1");
f1.addListeners (f1);
BusyFrameTest f2 = new BusyFrameTest ("F2");
BusyFrameTest f3 = new BusyFrameTest ("F3");
f2.addListeners (f3); // 2 listens to 3
f3.addListeners (f2); // 3 listens to 2

I've had the same problems with cursors and repaints in a swing application, and I was thinking of if I could use invokeLater, but I never got that far with it.
I still believe you would need a thread for the time consuming task, and that invokeLater is something you only need to use in a thread different from the event thread.

Problem with installing and running some applications or drivers

When installing and installing some items, towards the end of the installation I get this message:
/System/Library/Extensions/comcy_driver_USBDevice.kext
*was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update*
The end result is that some things do not seem to work properly, such as my HP printer. Would anybody have any ideas on how to fix this problem?

Thank you for your response. Originally, I had a problem with Airport and ended up reinstalling Snow Leopard. Since then, when downloading upgrades etc, such as HP printer drivers, iTunes etc., towards the end of the download when its running the script, I get this message: /System/Library/Extensions/comcy_driver_USBDevice.kext
+was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update+
Sometimes, the download hangs and is unable to complete. The main problem I've encountered so far with an application is when I use the printer to scan an image via Preview, it's blank: there's nothing there.

Problems with Safari and Firefox (HTTP?)

Problems with Safari and Firefox (HTTP?)
On a laptop G4, 10.5.8 and Safari 5.02 I experience the following:
On the account of my oldest daughter everything works fine, i.e. wireless internet works and no problems with mail or safari.
On the same laptop, on the account of my other daughter, the wireless is OK, she can mail etc. But safari nor firefox works. It says: can’t find server (whatever site) and in the activity window it looks if safari tries to open files (in the safari preferences-folder) in stead of http. Same applies to Firefox, so maybe it has more to do with HTTP in general?
What goes wrong? What to do? I tried the following on the host terminal (tips from Apple)
defaults write com.apple.safari WebKitDNSPrefetchingEnabled -boolean false
and
defaults delete com.apple.safari WebKitDNSPrefetchingEnabled
but that did not help,
Nanne

I'm still wondering why it happens now at this moment in time...
PC does seem to be a bit odd & inconsistent, the few times I've tested with it, at least so far as we content filtering goes; and if I remember rightly, you're not the first to report previously ok settings suddenly preventing some or all internet until pc is switched off altogether.
It may work when re-enabled

Haven't been able to use pages for a while. Keep getting following message. Have tried reinstalling iWork, but no luck. Same problems with Keynote and Numbers/Users/scottmcdonald/Desktop/Screen Shot 2012-03-14 at 9.39.52 PM.png

Haven't been able to use pages for a while. Keep getting following message. Have tried reinstalling iWork, but no luck. Same problems with Keynote and Numbers/

Have you moved Pages from its installed location? Or just dragged a copy to your current system?
It can't find some of its resources apparently.
Peter

Problems with Outlook and 365

Similar Messages

Maybe you are looking for