Problems with Outlook WebAccess after 3.0 update -anyone else?

I updated to the 3.0 iphone software and now I am having problems using Outlook Web Access. I can read emails, but anytime I try to reply or forward an email, I get prompted for my username/password, and even if I enter ir or not, nothing happens, it just brings me back to the email I was trying to reply or forward.
What is even weirder is that a draft is actually created when I go into drafts, but it is not formatted correctly to begin typing (it brings up the text of the old email as the top of the message), so this is not a viable workaround.
I have tried this on two different iPhones that have updated to 3.0, and get the same results.
I never had this problem before I updated the software and this is a critical issue as this is the only way I can access my work email on the iPhone.
any help would be much appreciated. thanks

I had problems with our company OWA on my new iPhone 3g - Safari would crash (close) each time I tried to create a new message.
Found this thread and others, so went to Settings / Safari and cleared cache, cookies, & history. Also temporarily turned off pop-up blocking AND turned on the developer debugging to see if I could get an error.
Went back into Safari & OWA, and can now send emails. Turned the pop-up blocking back on, and can still send & receive emails fine with OWA. Turned developer debugging off, and can still send & receive emails w/OWA.
HTH -
= Stripe34

Similar Messages

I have a HP workforce 610 and cannot scan. I just spoke with HP and they told me it is a software problem with my MAC for image capture. Anyone else having difficulty?

I have a HP workforce 610 and cannot scan. I just spoke with HP and they told me it is a software problem with my MAC for image capture. Anyone else having difficulty?

If Image Capture doesn't work you could try the paid for app VueScan ( www.hamrick.com ). You can try it for free in demo mode to see if it works before purchase.

Problems with ITMS Videos after 1.1 Update

OK, so there are lots of posts about video problems on 5G ipods after software update 1.1 and what encoding methods were used etc etc.
After updating my 60GB iPod to 1.1 all my videos, including those purchased from the iTunes Music Store, suffer from audio problems.
The video playback is fine, no freezing like others have mentioned, but I get loud popping and clicking sounds on the audio, particulalry at the start of a clip.
Has ayone else experienced problems with video sound after the 1.1 update?
Restoring to software 1.0 resolved the problem so there is definitely a problem with 1.1 and ITMS content.
Apple need to sort this out. Fast.

I foolishly did the 1.1 upgrade to my 60G iPod. I found that, as we all know by now, that all ov my videos that weren't from Quicktime Pro or purchased through iTunes hang after about 30 seconds, and then continues without any audio. But, the really obnoxious part is that my videos that I converted via QuickTime Pro suffered from very strange audio artifacts. These would fall into the category of clicks, purrs, warbles and other strange noises in addition to the audio that is supposed to be there. That pushed me over the line, and I "downgraded" my iPod back to release 1.0. I did the "restore" to completely erase my iPod and then re-loaded it from iTunes. I had already upgraded iTunes, and it has no problems with my now-restored-to-version 1.0 iPod. By the way, you have to edit a system file in order to do the downgrade: Put the ipod in harddisk mode. Edit the file (hidden folder and file) \iPod_Control\Device\SysInfo Replace the line that have the word "buildID" with this line:
buildID: 0x05908000 (6.0)
Then run the original iPod Updater to put 1.0 back onto it. This will leave you with the "feature" that any video that you change the Video Kind to TV Show will not show up on your iPod unless it's in a Video Play List. I actually like this, as it keeps the Video list from being cluttered up.
Sony Vaio PCG-U1 Windows XP Pro

Has anyone experienced problems with outlook mail after ios6

Starting with the release of iOS6 I have had a problem with mail making it to my desktop. I never had this problem before. The mail arrives fine on my iPad and iPhone, but it's not in my ourlook inbox. Any ideas? I have the iPhone 4 and the original iPad. I have checked the settings and the "mail" option is set to "on" on both devices.

RobertRTillman wrote:
1. Apple has removed sync services in OS X Mavericks. Therefore, you cannot sync Outlook 2011 with Contacts or Calendar.
2. Apple has removed the ability to sync through iTunes in OS X Mavericks, so that, even if you use Contacts and Calendar on the Mac, you can only sync them with your iPhone through iCloud, thus exposing all your contacts and calendar information to the mercies of the Web.
3. Microsoft does not not support CalDAV and CardDAV in Outlook, so there is no way to sync directly through iCloud, except perhaps by setting up a Microsoft Exchange account.
4. Apple makes it extremely difficult (virtually impossible) to revert to a version of OSX that is earlier than OS X Mavericks once Mavericks is installed.
In short, we are screwed and neither company seems to care.
In fact Microsoft does support Cal and CardDav in Outlook, just not in the Mac version of Outlook.
Reverting back from Mavericks requires nothing more than a backup of the system to restore from, if you do not elect to make backups that is a choice, but I would venture that it is a bad choice.

BB 8830 syncing problem with Outlook 2007 after Google calendar

Hi
I have a BB 8830 WE that was working fien with Outlook 2007. I recently started syncing with Google calendar and I believe since then I get an error message everytime I am syncing with Oultook 2007: it works fine when it is scrolling through teh contacts but when it reaches calendar items it stops and gives me an error message: BlackBerry Desktop Manager has encountered a problem and needs to close. We are sorry for the inconvenience.
I tried to repair Outlook 2007 as recommended by Google Calendar but it has not worked.
I woudl appreciat eany help or suggestions.
Thanks
Alfred

http://support.apple.com/kb/HT1692

Problems with Menu Bar after recent security update

Ever since installing yesterday's security update I have been having problems with the menu bar. When clicking on the blue Apple in the upper left hand corner, no drop-down menu appears as it should. This problem also occurs in the drop-down menu named for the program in various instances (Thunderbird, Azureus, iTunes, Finder, Firefox) but not in others (Safari, Adium, VLC). Sometimes the menus are simply truncated and do not include all the options they should rather than not opening at all.
I have run Disk Utlity which found no problems and have performed a hard restart multiple times but the problem persists. Any advice would be very helpful. Thank you.

Thanks for the help. I tried most of the solutions listed in the link you supplied, but am still having the same problem. However, when I tried to run the Tiger Cache Cleaner, I got the following error message:
Runtime Error 4: Failed Assertion
Location: /Volumes/RBUS/Common/MacOs/MacOSMenu.cpp:420
Failure Condition: appMenu
Failure Message:
Please report what caused this error along with the details above.
Thoughts?

Problems with incoming iMessages after iOS 7 update

Hello,
Since updating to iOS 7 (and also installing the 7.02 update), I am having the following problems with iMessages:
1) Messages sent to my phone from another iPhone user do not hit my phone until it connects to the internet, either via wifi or through cellular data. I don't have a lot of data on my cell plan, so I keep cellular data turned 'off' unless I am actively using it. As an example, yesterday, my daughter who has an iPhone had messaged me, and rather than just recieving her messages as regular old texts, they had to sit there in cyberspace until I turned my cellular data on, and then they hit my phone as iMessages. Prior to iOS 7, they came as text messages if my phone was not web-connected and available for an iMessage. I don't like that I had no clue there were messages waiting for me until I activated cellular data so I could check my email.
2) I am not getting push notifications for iMessages. When I'm home and the phone is connected to wifi, if I wake the phone up to use it for something (hit the home button and slide it), a few seconds into using the phone, I will receive iMessages that were sent while the phone was sitting there not being used. As an example, yesterday my daughter had sent several messages to me that were delivered as iMessages since my phone was connected to wifi.... but they didn't hit my phone until I was utilizing the phone for another purpose. They had been sent a couple of hours earlier and I had no clue the messages existed because I hadn't been notified.
3) Sometimes the #2 situation is worse... I don't get the iMessages over wifi until I actually open the Messages app.
Also, when I put iOS 7 on my phone, it deleted all previous conversations that had come through as iMessages. Made me sad. I had a lot of photos that had been sent to me via iMessage that were just there in the conversation threads, and now I don't have those photos anymore.
Any thoughts about how to remedy my issues? I hate not knowing someone with another iPhone is trying to message me. When an android user sends me a message, it just comes through as a text and I know it's there... but fellow iPhone users might as well call me to tell me they have sent me a text, because otherwise... I'll never know!

I have the same problem :(
I backed up my iphone 4S - which had been ugpraded to IOS6 - and when i restored to my Iphone 5 -- my shortcut keys had stopped working!
Turning it off - and back on again makes shortcuts work - but only for so long
All my shortcuts have been copied over correctly.

Problems with keyboard shortcuts after iOS 6 update?

Just to be clear what I am talking about, I am talking about Settings > General > Keyboard > Shortcuts.
My keyboard shortcuts stopped working after the software update. I have deleted and recreated them and nothing.
Anyone else having this problem?

I have the same problem :(
I backed up my iphone 4S - which had been ugpraded to IOS6 - and when i restored to my Iphone 5 -- my shortcut keys had stopped working!
Turning it off - and back on again makes shortcuts work - but only for so long
All my shortcuts have been copied over correctly.

Problem with installing programs after the new update.

I am having a problem with mounting downloads. I tried installing a download and in the dowload manager it says the disk could not be mounted about 2mins later i get a warning telling me the device is not configured. I had the same problem as everyone else not being able to get past the frozen screen. I resolved this using the disk utility on the install disc. I am wondering if this had something to do with my mounting problem. I would love some help.
Macbook G4 Mac OS X (10.4.9)

Others have reported the same experience, so you're not alone. The consensus seems to be booting into safe mode and mounting from there.
See the following macfixit.com article for step-by-step info:
http://www.macfixit.com/article.php?story=20070318234629161
Dennis

HT4528 slow repsonse with I phone interface since new update anyone else having issues?

Hello all ,
I was woundering if anyone else was having very slow response times on using the I phones after they updated the new OS7.2 ? I went from lighting speed response to almost no or little response on my i phone i cant even delete my old voice mails. i have to repetely tap and slide many times in a row for the phone to do basic function things pre update was no problem? And im not talking provider issues just basic function with the phone it self .

Thank you for your response Dilbert41
its not a lag issue its a problem with the software it self causing it to be slow in response for example when i want to use the phone i have to slide the bar to use it it takes many times of sliding the slider to operate it same if i want to see my phots or check my voice mail or text and make a call there was nothing wrong with these basic functions with 7.0, 7.1 but theres a problem now with the newest update plus im not the only one that i know of with this problem my wife has the newest i phone and same issue and settings didnt help problem is still there anyone else have any ideas ? or was this update just rushed out with many bugs ? will there be a fix ?

2010 Mini superdrive has stopped working after Mountain Lion update - anyone else?

After updating to 10.8 the superdrive on my 2010 mini has completely stopped working. It will not accept any disks. Disk Utility sees the drive as a working drive. Anyone else having this issue? If yes and you've resolved it, how??

Same thing happened to me with Mountain Lion. It seems that at the moment there's no solution. I've tried to burn a DVD with Toast Titanium, iDVD and the SimplyBurn. All of them failed.
It's a shame that Apple did this because we pay for a computer with a drive that could burn DVD discs. I´m very, very disappointed with Apple!

Having problems with wake on LAN ... does anyone else have this problem trying wake your mac remotely?

I've set my computer in system preferences to wake the computer from network, yet it doesn't seem to work.
Has anyone else tried to do this using a remote desktop and found any success?
I've even made a schedule for the computer to wake at a certain time, but if I try to log on remotely too late, the computer has already gone back to sleep ...
any advice?

Me too. I thought iChat under SL or Lion would do it, but it will not wake up a remote mac with a request for screen control, or a video/ text request. Any ideas?

Problems with Danish characters after 3.4 update

Hello
I have now tried to update photos to my archieve - http://www.fodboldfotografen.dk/coppermine14x/index.php - Coppermine as I have always done. In the description, keyword and meta data text I am using Danish Characters such as ø æ å Ø Æ Å. Until now there have never been any problems.... but today after updating to 3.4 I get the following
FC NordsjÃ¦lland mod Silkeborg IF i Farum Park. Resultat 3-2. MÃ¥l af Rawez Lawan (FCN), Nicolai Stokholm (FCN), Martin Ã�rnskov (SIF), Jeppe Illum (SIF)
When I open the file in Photoshop and check the meta data there is no problem to be noticed.... only when uploaded. I tried to upload the latest files before updating - exported from Lightroom and there is no problem. So it is not coppermine....
Any suggestions......?
Fortunately I haven't updated my labtop to 3.4, so I will try on 3.3 later and see what happen...
Thanks for your help!
Michael

Morning Beat
Thank you so much for your answer... Have read through the thread you added and can see that others have the same problem.
I checked the setting in Coppermine and it is set to (recommended) UNICODE UTF-8. So apprently and unfortunately that didn't seem to be the problem :-/
Someone mentioned saving the metadata again in 3.4. I have to look into that. But to me it seems odd and a fault in LR 3.4
Best Regards
Michael Boesen
Denmark

Problems with iCloud backup after iOS 7 update

After I installed iOS 7.0 my iPad mini every time it tries to backup to iCloud it asks for my iCloud password and I submit it every time and then it works fine. How can I get it to remeber it?

I have the same problem :(
I backed up my iphone 4S - which had been ugpraded to IOS6 - and when i restored to my Iphone 5 -- my shortcut keys had stopped working!
Turning it off - and back on again makes shortcuts work - but only for so long
All my shortcuts have been copied over correctly.

My ipod 4 g types on it own? seems to have happened after the latest update anyone else encounter this?

Litterally can't type or hit any app correctly on my ipod touch, cleaned the screen, restored to factory, used a stylus, nothing works, dont even have to be touching the screen, anyone else experience this?

Try a Reset...
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
Also, see here > http://support.apple.com/kb/ts1827

Problems with Outlook WebAccess after 3.0 update -anyone else?

Similar Messages

Maybe you are looking for