Problems with Pages and Numbers using iCloud Drive on early 2008 MacPro, Yosemite
One of my computers, an early 2008 MacPro running Yosemite, will NOT save Pages or Numbers documents to iCloud Drive from within those applications. I see the little iCloud Drive error badge next to the file name in Finder after I try to save. However, on the SAME computer I can save Pages and Numbers documents to a local drive (e.g., to my Desktop) and then use the Finder to drag the documents to iCloud Drive successfully. Another computer, a MacBook Pro running Yosemite, has no problems using iCloud Drive to create, edit and then save Pages and Numbers documents stored on iCloud Drive. I have tried "turning off" iCloud Drive for Pages and Numbers in System Preferences on the Mac Pro and then turning it back on to no effect. I have also logged out of iCloud Drive on all of my devices (which include two iOS devices) and then logging back in to ensure that I'm using the same login id on all devices, again with no apparent change.
Any suggestions for my next steps in attempting to solve this issue? Is there any way to get more information about precisely what type of error is occurring? Hovering over the badge only shows "Error".
Thanks in advance.
Jon
Found a solution, but it is odd:
On the 2008 Mac Pro, I UNCHECK the boxes beside Pages and Numbers in System Preferences > iCloud > iCloud Drive > Options. Now Pages and Numbers will properly save edited documents to the appropriate folders on iCloud Drive.
Go figure ...
Hope that this helps someone else.
Jon
Similar Messages
-
Synching problems with pages and numbers
After an initial problem with synching which was resolved with Yosemite Pages and Numbers have been synching across all my devices for a couple of weeks and now all of a sudden they have stopped again!! They synch across my phones and iPad but not to my macbook pro!! Very very annoying! How do I resolve it?
Found a solution, but it is odd:
On the 2008 Mac Pro, I UNCHECK the boxes beside Pages and Numbers in System Preferences > iCloud > iCloud Drive > Options. Now Pages and Numbers will properly save edited documents to the appropriate folders on iCloud Drive.
Go figure ...
Hope that this helps someone else.
Jon -
Application problems with pages and numbers after Yosemite install
Since upgrading to Yosemite and updating my applications, I have problems opening some documents in Pages and Numbers and get a message
You need a newer version of Numbers to open this spreadsheet.
I also have 2 icons for Pages? The old icon and the new?
When an upgrade occurs doesn't the old version normally get "absorbed" by the new version?
What do I need to do to resolve this?There are other problems in Pages and Keynote and Numbers. When you use the Share tool, and choose Open In Another App...... no apps are listed except for iTunes U. This is an error, as there are several apps available on the ipad that open Pages. Also, in the Share tool, if I select Send a Copy, the email option is not available. We have checked with app developers who say they their most recent app version addresses this issue, but it doesn't.
We have tried to erase and reset the ipad, put everything back, and the problem still exists. -
Haven't been able to use pages for a while. Keep getting following message. Have tried reinstalling iWork, but no luck. Same problems with Keynote and Numbers/
Have you moved Pages from its installed location? Or just dragged a copy to your current system?
It can't find some of its resources apparently.
Peter -
I purchased a IPad Air with Pages and Numbers included. I was told I could use these apps on my other devices like my MacBook. How do I sync or add these to my macBook?
the free apps are only for ios device (iphone ipad ipod touch) and do not work on mac computers. if you do get pages and numbers on your mac though you can sync the information using icloud
-
can i safely trash Iwork '08 since i have already Installed Iwork '11 or will i loose my documents made with pages and numbers '08???
You can have multiple versions installed simultaneously. It won't hurt to delete the '08 apps, because the '09 apps will convert '08 to '09, but there is no reason to do the deletion.
You say that you have iWork '11. If that's true, it's really big news. More likely, you have iWork '09.
Jerry -
Trying to figure out why is there a keystroke delay many times in Pages and Numbers? I'm on a 2010 macPro running Lion
I had a similar problem when working on a long Pages doc (40,000 words).The glitch only occurred on this one Pages file and affected no other applications. I fixed it by duplicating the file, trashing the original and working on the new document. I have no idea of the cause of the problem.
-
Is Adobe experiencing problems with downloads and updates of iCloud applications?
I have not been able to apply updates to CS6 versions of Muse, Photoshop and Dreamweaver. I thought the problem might be with a corrupted installer, so I dumped my copies of Muse, Dreamweaver and Photoshop so as to start over. Bit mistake. Now I can't even download the full version, much less the upgrade. Is anyone else experiencing problems?
Found a solution, but it is odd:
On the 2008 Mac Pro, I UNCHECK the boxes beside Pages and Numbers in System Preferences > iCloud > iCloud Drive > Options. Now Pages and Numbers will properly save edited documents to the appropriate folders on iCloud Drive.
Go figure ...
Hope that this helps someone else.
Jon -
Does digital vga cable link from ipad2 to external monitor work with pages and numbers
Are you able toutilize pages and numbers on an external monitor with and ipad2 by utilizing a digital VGA cable
Hi ederg:
You may want to download/update: Monitor file for Windows 7 (Thinkpad)
The reason I say that is because the readme it states, "If you use the preload environment, you do not need this package. This package is required when you install Windows OS without the preload image."
Since you setup the Thinkpad with Windows 7 Pro CD and no longer have the preload image, this may fix the problem.
Also, have you checked the website for the displayport manufacturer? They may have updated drivers there that wouldn't have been on the update tool you used.
*Edit* You can also check the: External monitors issues section here. It goes over some basic troubleshooting you may want to try first (I just came across it now)
Let us know how it turns out!
Was this or another post on the forum helpful? Click the star on the left side of the screen to give kudos! Did someone solve a problem you encountered? Mark it as "solution provided" to help others with the same problem. -
Problem with writing and reading using serialization
I am having a problem with writing and reading an object that has another object in it. The purpose of the class is to write a order that has multiple items in it. And there will be several orders. This is for an IB project, where one of the requirements is to utilize a hierarchical composite data structure. That is, it is "one that contains more than one element and at least one of the elements is a composite data structure. Examples are, an array or linked list of records, a record that has one field that is another record, or an array". The code is shown below:
The error produced is
java.lang.NullPointerException
at SamsonRubberIndustries.CustomerOrderDetails.createCustOrdDetailsScreen(CustomerOrderDetails.java:150)
at SamsonRubberIndustries.CustomerOrderDetails$1.run(CustomerOrderDetails.java:78)
at java.awt.event.InvocationEvent.dispatch(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
public class CustOrdObject implements Serializable {
public int CustID;
public int CustOrderID;
public Object OrderDate;
public InnerCustOrdObject[] innerCustOrdObj;
public float GrandTotal;
public int MaxItems;
public CustOrdObject() {}
public CustOrdObject(InnerCustOrdObject[] innerCustOrdObj,
int CustID, int CustOrderID, Object OrderDate,
float GrandTotal, int innerarrlength, int innerarrpos, int MaxItems) {
this.CustID = CustID;
this.CustOrderID = CustOrderID;
this.OrderDate = OrderDate;
this.GrandTotal = GrandTotal;
this.MaxItems = MaxItems;
this.innerCustOrdObj = new InnerCustOrdObject[MaxItems];
public InnerCustOrdObject[] getInnerCustOrdObj() {
return innerCustOrdObj;
public void setInnerCustOrdObj(InnerCustOrdObject[] innerCustOrdObj) {
this.innerCustOrdObj = innerCustOrdObj;
public int getCustID() {
return CustID;
public void setCustID(int custID) {
CustID = custID;
public int getCustOrderID() {
return CustOrderID;
public void setCustOrderID(int custOrderID) {
CustOrderID = custOrderID;
public Object getOrderDate() {
return OrderDate;
public void setOrderDate(Object orderDate) {
OrderDate = orderDate;
public void setGrandTotal(float grandTotal) {
GrandTotal = grandTotal;
public float getGrandTotal() {
return GrandTotal;
public int getMaxItems() {
return MaxItems;
public void setMaxItems(int maxItems) {
MaxItems = maxItems;
public class InnerCustOrdObject implements Serializable{
public int ItemNumber;
public float UnitPrice;
public int QuantityRequired;
public float TotalPrice;
public InnerCustOrdObject() {}
public InnerCustOrdObject(int ItemNumber, float
UnitPrice, int QuantityRequired, float TotalPrice){
this.ItemNumber = ItemNumber;
this.UnitPrice = UnitPrice;
this.QuantityRequired = QuantityRequired;
this.TotalPrice = TotalPrice;
public int getItemNumber() {
return ItemNumber;
public void setItemNumber(int itemNumber) {
ItemNumber = itemNumber;
public int getQuantityRequired() {
return QuantityRequired;
public void setQuantityRequired(int quantityRequired) {
QuantityRequired = quantityRequired;
public float getTotalPrice() {
return TotalPrice;
public void setTotalPrice(float totalPrice) {
TotalPrice = totalPrice;
public float getUnitPrice() {
return UnitPrice;
public void setUnitPrice(float unitPrice) {
UnitPrice = unitPrice;
import java.awt.*;
import java.awt.event.*;
import java.io.*;
import java.text.SimpleDateFormat;
import java.util.Date;
import javax.swing.*;
import javax.swing.table.DefaultTableCellRenderer;
import javax.swing.table.DefaultTableModel;
public class CustomerOrderDetails extends CommonFeatures{
//TODO
private static int MAX_ORDERS = 200;
private static int MAX_ORDERITEMS = 100;
private static int MaxRecord;
private static int CurrentRecord = 1;
private static int currentItem;
private static int MaxItems;
private static boolean FileExists, recFileExists;
private static CustOrdObject[] orderDetails = new CustOrdObject[MAX_ORDERS];
private static InnerCustOrdObject[] innerCustOrdObj = new InnerCustOrdObject[MAX_ORDERITEMS];
private static File OrderDetailsFile = new File("CustOrdDetails.dat");
private static File OrdRecordNumStore = new File("OrdRecordNumStore.txt");
private static PrintWriter writeFile;
private static BufferedReader readFile;
private static ObjectOutputStream objOut;
private static ObjectInputStream objIn;
//Set format for date
SimpleDateFormat simpleDF = new SimpleDateFormat("dd MM yyyy");
//--<BEGINNING>--Declaring Interface Variables------------------------------------------//
private JPanel innertoppanel, innercenterpanel, innerbottompanel, innerrightpanel, innerleftpanel;
private JLabel CustIDLbl, CustOrderIDLbl, OrderedDateLbl, GrandTotLbl, ItemNumberLbl,UnitPriceLbl, QuantityReqLbl, TotPriceLbl;
private JTextField CustIDTxt, CustOrderIDTxt, OrderedDateTxt, GrandTotTxt, ItemNumberTxt, UnitPriceTxt, QuantityReqTxt, TotPriceTxt;
private JButton addrecordbtn, savebtn, externalprevbtn, externalnextbtn, internalprevbtn, internalnextbtn, gotorecordbtn, additemreqbtn;
//--<END>--Declaring Interface Variables------------------------------------------------//
public static void main(String[] args) {
final CustomerOrderDetails COD = new CustomerOrderDetails();
java.awt.EventQueue.invokeLater(new Runnable() {
public void run() {
try {
UIManager.setLookAndFeel("com.sun.java.swing.plaf.windows.WindowsLookAndFeel");
COD.createCustOrdDetailsScreen();
} catch (Exception eb) {
eb.printStackTrace();
//--<BEGINNING>--Creating CustomerOrderDetails Screen---------------------------------------//
public JFrame createCustOrdDetailsScreen() {
createDefaultFrame();
mainframe.setSize(800,500);
createContainerPanel();
containerpanel.add(createCustOrdDetailsTitle(), BorderLayout.NORTH);
containerpanel.add(createCustOrdDetailsMainPanel(), BorderLayout.CENTER);
//containerpanel.add(createCustOrdDetailsLeftNavButtons(), BorderLayout.WEST);
//containerpanel.add(createCustOrdDetailsRightNavButtons(), BorderLayout.EAST);
containerpanel.add(createCustOrdDetailsButtons(), BorderLayout.SOUTH);
mainframe.setContentPane(containerpanel);
mainframe.setLocationRelativeTo(null);
mainframe.setVisible(true);
//--<BEGINNING>--Checks to see whether CRecordNumberStore file exists-------------------------------//
if (OrdRecordNumStore.exists() == true) {
recFileExists = true;
}else {
recFileExists = false;
if (recFileExists == true) {
MaxRecord = readRecordNumber();
CurrentRecord = MaxRecord;
//readOrder();
//readInnerOrderRecord(CurrentRecord);
System.out.println("Current Record " +CurrentRecord);
System.out.println("Max Record " +MaxRecord);
}else{
MaxRecord = 1;
writeRecordNumber(MaxRecord);
CustOrderIDTxt.setText(""+MaxRecord);
System.out.println("Current Record " +CurrentRecord);
System.out.println("Max Record " +MaxRecord);
//--<END>--Checks to see whether CRecordNumberStore file exists--------------------------------------//
if(readOrder() != null){
orderDetails = (CustOrdObject[]) readOrder();
innerCustOrdObj = orderDetails[CurrentRecord].getInnerCustOrdObj();
MaxItems = orderDetails[CurrentRecord].getMaxItems();
if(CurrentRecord > 1 && CurrentRecord < MaxRecord){
externalnextbtn.setEnabled(true);
externalprevbtn.setEnabled(true);
if(CurrentRecord >= MaxRecord){
externalnextbtn.setEnabled(false);
getFieldText(CurrentRecord-1);
}else{
orderDetails[CurrentRecord] = new CustOrdObject();
currentItem = 1;
return mainframe;
//--<END>--Creating CustomerOrderDetails Screen---------------------------------------------//
public JPanel createCustOrdDetailsTitle(){
createTitlePanel();
titlepanel.setBackground(TxtfontColor);
label.setText("- Customer Order Details -");
labelpanel.setBackground(TxtfontColor);
label.setForeground(Color.white);
createbuttonpanel();
buttonpanel.setBackground(TxtfontColor) ;
buttonpanel.add(createReturnToMainMenuButton());
titlepanel.add(labelpanel, BorderLayout.WEST);
titlepanel.add(buttonpanel, BorderLayout.EAST);
return titlepanel;
public JPanel createCustOrdDetailsMainPanel(){
createmainpanel();
mainpanel.setBackground(TxtfontColor);
mainpanel.setLayout(new BorderLayout());
mainpanel.setBorder(BorderFactory.createTitledBorder(""));
mainpanel.add(createInnerTopPanel(), BorderLayout.NORTH);
mainpanel.add(createInnerCenterPanel(), BorderLayout.CENTER);
mainpanel.add(createInnerBottomPanel(), BorderLayout.SOUTH);
mainpanel.add(createInnerRightPanel(), BorderLayout.EAST);
mainpanel.add(createInnerLeftPanel(), BorderLayout.WEST);
return mainpanel;
public JPanel createInnerTopPanel(){
innertoppanel = new JPanel(new GridBagLayout());
innertoppanel.setBackground(TxtfontColor);
GridBagConstraints GBC = new GridBagConstraints();
GBC.fill = GridBagConstraints.HORIZONTAL;
//Setting Font Type and Size
Font font = new Font("Arial", Font.BOLD, 11);
CustIDLbl = new JLabel("Customer ID");
CustIDLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
CustIDLbl.setFont(font);
CustIDLbl.setForeground(LblfontColor);
GBC.gridx = 1;
GBC.gridy = 1;
innertoppanel.add(CustIDLbl, GBC);
CustIDTxt = new JTextField(20);
CustIDTxt.setEditable(true);
GBC.gridx = 2;
GBC.gridy = 1;
innertoppanel.add(CustIDTxt, GBC);
GBC.gridx = 3;
GBC.gridy = 1;
innertoppanel.add(Box.createHorizontalStrut(220), GBC);
OrderedDateLbl = new JLabel("Order Date");
OrderedDateLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
OrderedDateLbl.setFont(font);
OrderedDateLbl.setForeground(LblfontColor);
GBC.gridx = 4;
GBC.gridy = 1;
innertoppanel.add(OrderedDateLbl, GBC);
//Get today's date
Date todaydate = new Date();
OrderedDateTxt = new JTextField(simpleDF.format(todaydate), 20);
OrderedDateTxt.setHorizontalAlignment(JTextField.CENTER);
OrderedDateTxt.setEditable(false);
GBC.gridx = 5;
GBC.gridy = 1;
innertoppanel.add(OrderedDateTxt, GBC);
CustOrderIDLbl = new JLabel("Customer Order ID");
CustOrderIDLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
CustOrderIDLbl.setFont(font);
CustOrderIDLbl.setForeground(LblfontColor);
GBC.gridx = 1;
GBC.gridy = 2;
innertoppanel.add(CustOrderIDLbl, GBC);
CustOrderIDTxt = new JTextField(20);
CustOrderIDTxt.setEditable(false);
GBC.gridx = 2;
GBC.gridy = 2;
innertoppanel.add(CustOrderIDTxt, GBC);
return innertoppanel;
public JPanel createInnerCenterPanel(){
innercenterpanel = new JPanel(new GridBagLayout());
innercenterpanel.setBackground(TxtfontColor);
innercenterpanel.setBorder(BorderFactory.createLoweredBevelBorder());
GridBagConstraints GBC = new GridBagConstraints();
GBC.fill = GridBagConstraints.HORIZONTAL;
//Setting Font Type and Size
Font font = new Font("Arial", Font.BOLD, 11);
ItemNumberLbl = new JLabel("Item Number");
ItemNumberLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
ItemNumberLbl.setFont(font);
ItemNumberLbl.setForeground(LblfontColor);
GBC.gridx = 1;
GBC.gridy = 1;
innercenterpanel.add(ItemNumberLbl, GBC);
ItemNumberTxt = new JTextField(20);
GBC.gridx = 2;
GBC.gridy = 1;
innercenterpanel.add(ItemNumberTxt, GBC);
UnitPriceLbl = new JLabel("Unit Price");
UnitPriceLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
UnitPriceLbl.setFont(font);
UnitPriceLbl.setForeground(LblfontColor);
GBC.gridx = 1;
GBC.gridy = 2;
innercenterpanel.add(UnitPriceLbl, GBC);
UnitPriceTxt = new JTextField(20);
//UnitPriceTxt.setEditable(false);
GBC.gridx = 2;
GBC.gridy = 2;
innercenterpanel.add(UnitPriceTxt, GBC);
QuantityReqLbl = new JLabel("Quantity Required");
QuantityReqLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
QuantityReqLbl.setFont(font);
QuantityReqLbl.setForeground(LblfontColor);
GBC.gridx = 1;
GBC.gridy = 3;
innercenterpanel.add(QuantityReqLbl, GBC);
QuantityReqTxt = new JTextField(20);
//QuantityReqTxt.setEditable(false);
GBC.gridx = 2;
GBC.gridy = 3;
innercenterpanel.add(QuantityReqTxt, GBC);
TotPriceLbl = new JLabel("Total Price");
TotPriceLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
TotPriceLbl.setFont(font);
TotPriceLbl.setForeground(LblfontColor);
GBC.gridx = 1;
GBC.gridy = 4;
innercenterpanel.add(TotPriceLbl, GBC);
TotPriceTxt = new JTextField(20);
//TotPriceTxt.setEditable(false);
GBC.gridx = 2;
GBC.gridy = 4;
innercenterpanel.add(TotPriceTxt, GBC);
return innercenterpanel;
public JPanel createInnerBottomPanel(){
innerbottompanel = new JPanel(new FlowLayout(FlowLayout.RIGHT));
innerbottompanel.setBackground(TxtfontColor);
//Setting Font Type and Size
Font font = new Font("Arial", Font.BOLD, 11);
GrandTotLbl = new JLabel("Grand Total");
GrandTotLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
GrandTotLbl.setFont(font);
GrandTotLbl.setForeground(LblfontColor);
innerbottompanel.add(GrandTotLbl);
innerbottompanel.add(Box.createHorizontalStrut(30));
GrandTotTxt = new JTextField(20);
innerbottompanel.add(GrandTotTxt);
return innerbottompanel;
public JPanel createInnerRightPanel(){
innerrightpanel = new JPanel(new FlowLayout(FlowLayout.CENTER));
innerrightpanel.setBackground(TxtfontColor);
innerrightpanel.setLayout(new BoxLayout(navrightpanel, BoxLayout.Y_AXIS));
innerrightpanel.setBorder(BorderFactory.createLoweredBevelBorder());
innerrightpanel.setLayout(new GridBagLayout());
GridBagConstraints GBC = new GridBagConstraints();
GBC.fill = GridBagConstraints.HORIZONTAL;
internalnextbtn = new JButton(createNextButtonIcon());
GBC.gridx = 1;
GBC.gridy = 1;
internalnextbtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
//getInnerFieldText(currentItem);
internalprevbtn.setEnabled(true);
if(currentItem < MaxItems){
++CurrentRecord;
//readOrder();
//readInnerOrderRecord(CurrentRecord);
setInnerFieldText(currentItem);
System.out.println(CurrentRecord);//Checking RECORD_NUM
if(currentItem == MaxItems){
internalnextbtn.setEnabled(false);
innerrightpanel.add(internalnextbtn, GBC);
return innerrightpanel;
public JPanel createInnerLeftPanel(){
innerleftpanel = new JPanel(new FlowLayout(FlowLayout.CENTER));
innerleftpanel.setBackground(TxtfontColor);
innerleftpanel.setBorder(BorderFactory.createLoweredBevelBorder());
innerleftpanel.setForeground(Color.BLACK);
innerleftpanel.setLayout(new GridBagLayout());
GridBagConstraints GBC = new GridBagConstraints();
GBC.fill = GridBagConstraints.HORIZONTAL;
internalprevbtn = new JButton(createPreviousButtonIcon());
GBC.gridx = 1;
GBC.gridy = 1;
internalprevbtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
//getInnerFieldText(currentItem);
internalnextbtn.setEnabled(true);
if(currentItem == 1){
internalprevbtn.setEnabled(false);
if(currentItem > 0){
--currentItem;
//readOrder();
setInnerFieldText(currentItem);
innerleftpanel.add(internalprevbtn, GBC);
return innerleftpanel;
public JPanel createCustOrdDetailsButtons(){
createbuttonpanel();
buttonpanel.setBackground(TxtfontColor);
externalprevbtn = new JButton(createPreviousButtonIcon());
externalprevbtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
getFieldText(CurrentRecord);
externalnextbtn.setEnabled(true);
if(CurrentRecord == 1){
externalprevbtn.setEnabled(false);
if(CurrentRecord > 0){
--CurrentRecord;
setFieldText(CurrentRecord);
System.out.println(CurrentRecord);//Checking RECORD_NUM
buttonpanel.add(externalprevbtn);
addrecordbtn = new JButton("Add Record", createAddButtonIcon());
addrecordbtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
try{
MaxRecord = readRecordNumber();
MaxRecord++;
writeRecordNumber(MaxRecord);
//--<BEGINNING>--Clear Fields-------------------------------------------------------//
CustIDTxt.setText("");
CustOrderIDTxt.setText(""+MaxRecord);
//Get today's date
Date todaydate = new Date();
OrderedDateTxt.setText(""+simpleDF.format(todaydate));
ItemNumberTxt.setText("");
UnitPriceTxt.setText("");
QuantityReqTxt.setText("");
TotPriceTxt.setText("");
GrandTotTxt.setText("");
//--<END>--Clear Fields-------------------------------------------------------------//
externalnextbtn.setEnabled(false);
externalprevbtn.setEnabled(true);
System.out.println(MaxRecord);
} catch(Exception ec){ec.printStackTrace();}
buttonpanel.add(addrecordbtn);
savebtn = new JButton("Save Data", createSaveButtonIcon());
savebtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
setFieldText(CurrentRecord);
writeOrder();
writeRecordNumber(MaxRecord);
System.out.println(CurrentRecord);
System.out.println(MaxRecord);
buttonpanel.add(savebtn);
java.net.URL imageURL_AddRowIcon = CommonFeatures.class.getResource("Icons/edit_add.png");
ImageIcon AddRowIcon = new ImageIcon(imageURL_AddRowIcon);
additemreqbtn = new JButton("Add Item", AddRowIcon);
additemreqbtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
try{
//--<BEGINNING>--Clear Fields-------------------------------------------------------//
ItemNumberTxt.setText("");
UnitPriceTxt.setText("");
QuantityReqTxt.setText("");
TotPriceTxt.setText("");
//--<END>--Clear Fields-------------------------------------------------------------//
//CurrentRecord = MaxRecord;
currentItem++;
setInnerFieldText(currentItem);
internalnextbtn.setEnabled(false);
internalprevbtn.setEnabled(true);
System.out.println(MaxRecord);
} catch(Exception ec){ec.printStackTrace();}
buttonpanel.add(additemreqbtn);
externalnextbtn = new JButton(createNextButtonIcon());
externalnextbtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
getFieldText(CurrentRecord);
externalprevbtn.setEnabled(true);
if(CurrentRecord < MaxRecord){
++CurrentRecord;
setFieldText(CurrentRecord);
System.out.println(CurrentRecord);//Checking RECORD_NUM
if(CurrentRecord == MaxRecord){
externalnextbtn.setEnabled(false);
buttonpanel.add(externalnextbtn);
return buttonpanel;
//TODO
public void setFieldText(int orderID){//TODO
orderDetails[orderID].setCustID(Integer.parseInt(CustIDTxt.getText()));
orderDetails[orderID].setCustOrderID(Integer.parseInt(CustOrderIDTxt.getText()));
orderDetails[orderID].setOrderDate(OrderedDateTxt.getText());
orderDetails[orderID].setInnerCustOrdObj(innerCustOrdObj);
orderDetails[orderID].setMaxItems(MaxItems);
setInnerFieldText(currentItem);
orderDetails[orderID].setGrandTotal(Float.parseFloat(GrandTotTxt.getText()));
public void setInnerFieldText(int currentItem){//TODO
innerCustOrdObj[currentItem] = new InnerCustOrdObject();
innerCustOrdObj[currentItem].setItemNumber(Integer.parseInt(ItemNumberTxt.getText()));
innerCustOrdObj[currentItem].setUnitPrice(Float.parseFloat(UnitPriceTxt.getText()));
innerCustOrdObj[currentItem].setQuantityRequired(Integer.parseInt(QuantityReqTxt.getText()));
innerCustOrdObj[currentItem].setTotalPrice(Float.parseFloat(TotPriceTxt.getText()));
public void getFieldText(int orderID){
CustIDTxt.setText(Integer.toString(orderDetails[orderID].getCustID()));
CustOrderIDTxt.setText(Integer.toString(orderDetails[orderID].getCustOrderID()));
OrderedDateTxt.setText(""+orderDetails[orderID].getOrderDate());
currentItem = orderDetails[orderID].getMaxItems();
System.err.println("currentItem" + currentItem);
getInnerFieldText(currentItem);
GrandTotTxt.setText(Float.toString(orderDetails[orderID].getGrandTotal()));
public void getInnerFieldText(int currentItem){
ItemNumberTxt.setText(Integer.toString(innerCustOrdObj[currentItem].getItemNumber()));
UnitPriceTxt.setText(Float.toString(innerCustOrdObj[currentItem].getUnitPrice()));
QuantityReqTxt.setText(Integer.toString(innerCustOrdObj[currentItem].getQuantityRequired()));
TotPriceTxt.setText(Float.toString(innerCustOrdObj[currentItem].getTotalPrice()));
public void writeOrder(){//TODO
try {
objOut = new ObjectOutputStream(new FileOutputStream(OrderDetailsFile));
objOut.writeObject(orderDetails);
System.out.println("WORKING!");
objOut.flush();
objOut.close();
} catch (IOException e) {
e.printStackTrace();
public Object readOrder(){
Object temporaryObj;
try{
objIn = new ObjectInputStream(new FileInputStream(OrderDetailsFile));
temporaryObj = objIn.readObject();
CustOrdObject[] blah = (CustOrdObject[]) temporaryObj;
System.out.println("Outer: "+blah[1].getCustID());
InnerCustOrdObject[] whee = blah[1].getInnerCustOrdObj();
System.out.println("Inner: "+whee[1].getItemNumber());
objIn.close();
System.out.println("Read Worky!");
return temporaryObj;
}catch(Exception e){
e.printStackTrace();
System.out.println("Read No Worky!");
return null;
public void writeRecordNumber(int MaxRecord){
try{
objOut = new ObjectOutputStream(new FileOutputStream(OrdRecordNumStore));
objOut.writeObject(MaxRecord);
System.out.println("WORKING!");
objOut.flush();
objOut.close();
}catch(Exception e){e.printStackTrace();}
public int readRecordNumber() {
try {
objIn = new ObjectInputStream(new FileInputStream(OrdRecordNumStore));
int temporaryObj = Integer.parseInt(objIn.readObject().toString());
objIn.close();
System.out.println("Read Number Worky!");
return temporaryObj;
} catch (Exception e) {
e.printStackTrace();
System.out.println("Read Number No Worky!");
return -1;
}Message was edited by:
Kilik07
Message was edited by:
Kilik07ok i got reading to work to a certain extent... but the prob is i cnt seem to save my innerCustOrdObj proprly...when ever i look for a record using the gotorecordbtn, the outerobject, which is the orderDetails, seems to change but the innerCustOrdObj remains the same... heres the new code..
public class CustomerOrderDetails extends CommonFeatures{
//TODO
private static int MAX_ORDERS = 200;
private static int MAX_ORDERITEMS = 100;
private static int MaxRecord;
private static int CurrentRecord = 1;
private static int currentItem;
private static int MaxItems = 1;
private static boolean FileExists, recFileExists;
private static boolean RecordExists;
private static CustOrdObject[] orderDetails = new CustOrdObject[MAX_ORDERS];
private static InnerCustOrdObject[] innerCustOrdObj = new InnerCustOrdObject[MAX_ORDERITEMS];
private static File OrderDetailsFile = new File("CustOrdDetails.ser");
private static File OrdRecordNumStore = new File("OrdRecordNumStore.txt");
private static PrintWriter writeFile;
private static BufferedReader readFile;
private static ObjectOutputStream objOut;
private static ObjectInputStream objIn;
//Set format for date
SimpleDateFormat simpleDF = new SimpleDateFormat("dd MM yyyy");
//--<BEGINNING>--Declaring Interface Variables------------------------------------------//
private JPanel innertoppanel, innercenterpanel, innerbottompanel, innerrightpanel, innerleftpanel;
private JLabel CustIDLbl, CustOrderIDLbl, OrderedDateLbl, GrandTotLbl, ItemNumberLbl,UnitPriceLbl, QuantityReqLbl, TotPriceLbl;
private JTextField CustIDTxt, CustOrderIDTxt, OrderedDateTxt, GrandTotTxt, ItemNumberTxt, UnitPriceTxt, QuantityReqTxt, TotPriceTxt;
private JButton addrecordbtn, savebtn, externalprevbtn, externalnextbtn, internalprevbtn, internalnextbtn, gotorecordbtn, additemreqbtn;
//--<END>--Declaring Interface Variables------------------------------------------------//
public static void main(String[] args) {
final CustomerOrderDetails COD = new CustomerOrderDetails();
java.awt.EventQueue.invokeLater(new Runnable() {
public void run() {
try {
UIManager.setLookAndFeel("com.sun.java.swing.plaf.windows.WindowsLookAndFeel");
COD.createCustOrdDetailsScreen();
} catch (Exception eb) {
eb.printStackTrace();
//--<BEGINNING>--Creating CustomerOrderDetails Screen---------------------------------------//
public JFrame createCustOrdDetailsScreen() {
createDefaultFrame();
mainframe.setSize(800,500);
createContainerPanel();
containerpanel.add(createCustOrdDetailsTitle(), BorderLayout.NORTH);
containerpanel.add(createCustOrdDetailsMainPanel(), BorderLayout.CENTER);
//containerpanel.add(createCustOrdDetailsLeftNavButtons(), BorderLayout.WEST);
//containerpanel.add(createCustOrdDetailsRightNavButtons(), BorderLayout.EAST);
containerpanel.add(createCustOrdDetailsButtons(), BorderLayout.SOUTH);
mainframe.setContentPane(containerpanel);
mainframe.setLocationRelativeTo(null);
mainframe.setVisible(true);
//--<BEGINNING>--Checks to see whether CRecordNumberStore file exists-------------------------------//
if (OrdRecordNumStore.exists() == true) {
recFileExists = true;
}else {
recFileExists = false;
if (recFileExists == true) {
MaxRecord = readRecordNumber();
CurrentRecord = MaxRecord;
//readOrder();
//readInnerOrderRecord(CurrentRecord);
System.out.println("Current Record " +CurrentRecord);
System.out.println("Max Record " +MaxRecord);
}else{
MaxRecord = 1;
writeRecordNumber(MaxRecord);
CustOrderIDTxt.setText(""+MaxRecord);
System.out.println("Current Record " +CurrentRecord);
System.out.println("Max Record " +MaxRecord);
//--<END>--Checks to see whether CRecordNumberStore file exists--------------------------------------//
if(readOrder() != null){
orderDetails = (CustOrdObject[]) readOrder();
//CurrentRecord--;
//System.out.println("Current Rec Here"+CurrentRecord);
if(orderDetails[CurrentRecord] == null){
System.err.println("CustomerOrderObj 1 is null !!");
}else{
System.err.println("CustomerOrderObj 1 is not null !!");
if(orderDetails[CurrentRecord].getInnerCustOrdObj() == null){
System.err.println("InnerCustomerOrderObj is null !!");
}else{
System.err.println("InnerCustomerOrderObj is not null !!");
innerCustOrdObj = orderDetails[CurrentRecord].getInnerCustOrdObj();
MaxItems = orderDetails[CurrentRecord].getMaxItems();
if(CurrentRecord > 1 && CurrentRecord < MaxRecord){
externalnextbtn.setEnabled(true);
externalprevbtn.setEnabled(true);
if(CurrentRecord >= MaxRecord){
externalnextbtn.setEnabled(false);
getFieldText(CurrentRecord);
getInnerFieldText(MaxItems);
}else{
orderDetails[CurrentRecord] = new CustOrdObject();
currentItem = 1;
return mainframe;
//--<END>--Creating CustomerOrderDetails Screen---------------------------------------------//
public JPanel createCustOrdDetailsTitle(){
createTitlePanel();
titlepanel.setBackground(TxtfontColor);
label.setText("- Customer Order Details -");
labelpanel.setBackground(TxtfontColor);
label.setForeground(Color.white);
createbuttonpanel();
buttonpanel.setBackground(TxtfontColor) ;
buttonpanel.add(createReturnToMainMenuButton());
titlepanel.add(labelpanel, BorderLayout.WEST);
titlepanel.add(buttonpanel, BorderLayout.EAST);
return titlepanel;
public JPanel createCustOrdDetailsMainPanel(){
createmainpanel();
mainpanel.setBackground(TxtfontColor);
mainpanel.setLayout(new BorderLayout());
mainpanel.setBorder(BorderFactory.createTitledBorder(""));
mainpanel.add(createInnerTopPanel(), BorderLayout.NORTH);
mainpanel.add(createInnerCenterPanel(), BorderLayout.CENTER);
mainpanel.add(createInnerBottomPanel(), BorderLayout.SOUTH);
mainpanel.add(createInnerRightPanel(), BorderLayout.EAST);
mainpanel.add(createInnerLeftPanel(), BorderLayout.WEST);
return mainpanel;
public JPanel createInnerTopPanel(){
innertoppanel = new JPanel(new GridBagLayout());
innertoppanel.setBackground(TxtfontColor);
GridBagConstraints GBC = new GridBagConstraints();
GBC.fill = GridBagConstraints.HORIZONTAL;
//Setting Font Type and Size
Font font = new Font("Arial", Font.BOLD, 11);
CustIDLbl = new JLabel("Customer ID");
CustIDLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
CustIDLbl.setFont(font);
CustIDLbl.setForeground(LblfontColor);
GBC.gridx = 1;
GBC.gridy = 1;
innertoppanel.add(CustIDLbl, GBC);
CustIDTxt = new JTextField(20);
CustIDTxt.setEditable(true);
GBC.gridx = 2;
GBC.gridy = 1;
innertoppanel.add(CustIDTxt, GBC);
GBC.gridx = 3;
GBC.gridy = 1;
innertoppanel.add(Box.createHorizontalStrut(220), GBC);
OrderedDateLbl = new JLabel("Order Date");
OrderedDateLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
OrderedDateLbl.setFont(font);
OrderedDateLbl.setForeground(LblfontColor);
GBC.gridx = 4;
GBC.gridy = 1;
innertoppanel.add(OrderedDateLbl, GBC);
//Get today's date
Date todaydate = new Date();
OrderedDateTxt = new JTextField(simpleDF.format(todaydate), 20);
OrderedDateTxt.setHorizontalAlignment(JTextField.CENTER);
OrderedDateTxt.setEditable(false);
GBC.gridx = 5;
GBC.gridy = 1;
innertoppanel.add(OrderedDateTxt, GBC);
CustOrderIDLbl = new JLabel("Customer Order ID");
CustOrderIDLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
CustOrderIDLbl.setFont(font);
CustOrderIDLbl.setForeground(LblfontColor);
GBC.gridx = 1;
GBC.gridy = 2;
innertoppanel.add(CustOrderIDLbl, GBC);
CustOrderIDTxt = new JTextField(20);
//CustOrderIDTxt.setEditable(false);
GBC.gridx = 2;
GBC.gridy = 2;
innertoppanel.add(CustOrderIDTxt, GBC);
return innertoppanel;
public JPanel createInnerCenterPanel(){
innercenterpanel = new JPanel(new GridBagLayout());
innercenterpanel.setBackground(TxtfontColor);
innercenterpanel.setBorder(BorderFactory.createLoweredBevelBorder());
GridBagConstraints GBC = new GridBagConstraints();
GBC.fill = GridBagConstraints.HORIZONTAL;
//Setting Font Type and Size
Font font = new Font("Arial", Font.BOLD, 11);
ItemNumberLbl = new JLabel("Item Number");
ItemNumberLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
ItemNumberLbl.setFont(font);
ItemNumberLbl.setForeground(LblfontColor);
GBC.gridx = 1;
GBC.gridy = 1;
innercenterpanel.add(ItemNumberLbl, GBC);
ItemNumberTxt = new JTextField(20);
GBC.gridx = 2;
GBC.gridy = 1;
innercenterpanel.add(ItemNumberTxt, GBC);
UnitPriceLbl = new JLabel("Unit Price");
UnitPriceLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
UnitPriceLbl.setFont(font);
UnitPriceLbl.setForeground(LblfontColor);
GBC.gridx = 1;
GBC.gridy = 2;
innercenterpanel.add(UnitPriceLbl, GBC);
UnitPriceTxt = new JTextField(20);
//UnitPriceTxt.setEditable(false);
GBC.gridx = 2;
GBC.gridy = 2;
innercenterpanel.add(UnitPriceTxt, GBC);
QuantityReqLbl = new JLabel("Quantity Required");
QuantityReqLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
QuantityReqLbl.setFont(font);
QuantityReqLbl.setForeground(LblfontColor);
GBC.gridx = 1;
GBC.gridy = 3;
innercenterpanel.add(QuantityReqLbl, GBC);
QuantityReqTxt = new JTextField(20);
//QuantityReqTxt.setEditable(false);
GBC.gridx = 2;
GBC.gridy = 3;
innercenterpanel.add(QuantityReqTxt, GBC);
TotPriceLbl = new JLabel("Total Price");
TotPriceLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
TotPriceLbl.setFont(font);
TotPriceLbl.setForeground(LblfontColor);
GBC.gridx = 1;
GBC.gridy = 4;
innercenterpanel.add(TotPriceLbl, GBC);
TotPriceTxt = new JTextField(20);
TotPriceTxt.setEditable(false);
TotPriceTxt.addFocusListener(new FocusAdapter(){
public void focusGained(FocusEvent evt){
TotPriceTxt.setText(""+Integer.parseInt(UnitPriceTxt.getText())*Integer.parseInt(QuantityReqTxt.getText()));
GBC.gridx = 2;
GBC.gridy = 4;
innercenterpanel.add(TotPriceTxt, GBC);
return innercenterpanel;
public JPanel createInnerBottomPanel(){
innerbottompanel = new JPanel(new FlowLayout(FlowLayout.RIGHT));
innerbottompanel.setBackground(TxtfontColor);
//Setting Font Type and Size
Font font = new Font("Arial", Font.BOLD, 11);
GrandTotLbl = new JLabel("Grand Total");
GrandTotLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
GrandTotLbl.setFont(font);
GrandTotLbl.setForeground(LblfontColor);
innerbottompanel.add(GrandTotLbl);
innerbottompanel.add(Box.createHorizontalStrut(30));
GrandTotTxt = new JTextField(20);
innerbottompanel.add(GrandTotTxt);
return innerbottompanel;
public JPanel createInnerRightPanel(){
innerrightpanel = new JPanel(new FlowLayout(FlowLayout.CENTER));
innerrightpanel.setBackground(TxtfontColor);
innerrightpanel.setLayout(new BoxLayout(navrightpanel, BoxLayout.Y_AXIS));
innerrightpanel.setBorder(BorderFactory.createLoweredBevelBorder());
innerrightpanel.setLayout(new GridBagLayout());
GridBagConstraints GBC = new GridBagConstraints();
GBC.fill = GridBagConstraints.HORIZONTAL;
internalnextbtn = new JButton(createNextButtonIcon());
GBC.gridx = 1;
GBC.gridy = 1;
internalnextbtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
getInnerFieldText(currentItem);
internalprevbtn.setEnabled(true);
if(currentItem < MaxItems){
++currentItem;
orderDetails[CurrentRecord].getInnerCustOrdObj();
setInnerFieldText(currentItem);
System.out.println("Current Item" + currentItem);
if(currentItem == MaxItems){
internalnextbtn.setEnabled(false);
innerrightpanel.add(internalnextbtn, GBC);
return innerrightpanel;
public JPanel createInnerLeftPanel(){
innerleftpanel = new JPanel(new FlowLayout(FlowLayout.CENTER));
innerleftpanel.setBackground(TxtfontColor);
innerleftpanel.setBorder(BorderFactory.createLoweredBevelBorder());
innerleftpanel.setForeground(Color.BLACK);
innerleftpanel.setLayout(new GridBagLayout());
GridBagConstraints GBC = new GridBagConstraints();
GBC.fill = GridBagConstraints.HORIZONTAL;
internalprevbtn = new JButton(createPreviousButtonIcon());
GBC.gridx = 1;
GBC.gridy = 1;
internalprevbtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
getInnerFieldText(currentItem);
internalnextbtn.setEnabled(true);
if(currentItem == 1){
internalprevbtn.setEnabled(false);
if(currentItem > 0){
--currentItem;
orderDetails[CurrentRecord].getInnerCustOrdObj();
setInnerFieldText(currentItem);
System.out.println("Current Item" + currentItem);
innerleftpanel.add(internalprevbtn, GBC);
return innerleftpanel;
public JPanel createCustOrdDetailsButtons(){
createbuttonpanel();
buttonpanel.setBackground(TxtfontColor);
externalprevbtn = new JButton(createPreviousButtonIcon());
externalprevbtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
getFieldText(CurrentRecord);
externalnextbtn.setEnabled(true);
if(CurrentRecord == 1){
externalprevbtn.setEnabled(false);
if(CurrentRecord > 0){
--CurrentRecord;
setFieldText(CurrentRecord);
System.out.println("Current Record " + CurrentRecord);//Checking RECORD_NUM
buttonpanel.add(externalprevbtn);
addrecordbtn = new JButton("Add Record", createAddButtonIcon());
addrecordbtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
try{
MaxRecord = readRecordNumber();
MaxRecord++;
CurrentRecord = MaxRecord;
orderDetails[CurrentRecord] = new CustOrdObject();
writeRecordNumber(MaxRecord);
MaxItems = 1;
innerCustOrdObj[MaxItems] = new InnerCustOrdObject();
//--<BEGINNING>--Clear Fields-------------------------------------------------------//
CustIDTxt.setText("");
CustOrderIDTxt.setText(""+MaxRecord);
//Get today's date
Date todaydate = new Date();
OrderedDateTxt.setText(""+simpleDF.format(todaydate));
ItemNumberTxt.setText("");
UnitPriceTxt.setText("");
QuantityReqTxt.setText("");
TotPriceTxt.setText("");
GrandTotTxt.setText("");
//--<END>--Clear Fields-------------------------------------------------------------//
externalnextbtn.setEnabled(false);
externalprevbtn.setEnabled(true);
System.out.println(MaxRecord);
} catch(Exception ec){ec.printStackTrace();}
buttonpanel.add(addrecordbtn);
savebtn = new JButton("Save Data", createSaveButtonIcon());
savebtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
setFieldText(CurrentRecord);
setInnerFieldText(MaxItems);
writeOrder();
writeRecordNumber(MaxRecord);
System.out.println(CurrentRecord);
System.out.println(MaxRecord);
buttonpanel.add(savebtn);
java.net.URL imageURL_AddRowIcon = CommonFeatures.class.getResource("Icons/edit_add.png");
ImageIcon AddRowIcon = new ImageIcon(imageURL_AddRowIcon);
additemreqbtn = new JButton("Add Item", AddRowIcon);
additemreqbtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
try{
//--<BEGINNING>--Clear Fields-------------------------------------------------------//
ItemNumberTxt.setText("");
UnitPriceTxt.setText("");
QuantityReqTxt.setText("");
TotPriceTxt.setText("");
//--<END>--Clear Fields-------------------------------------------------------------//
//CurrentRecord = MaxRecord;
MaxItems++;
innerCustOrdObj[MaxItems] = new InnerCustOrdObject();
System.out.println("Max Items "+MaxItems);
currentItem = MaxItems;
orderDetails[CurrentRecord].setMaxItems(MaxItems);
///setInnerFieldText(currentItem);
internalnextbtn.setEnabled(false);
internalprevbtn.setEnabled(true);
} catch(Exception ec){ec.printStackTrace();}
buttonpanel.add(additemreqbtn);
externalnextbtn = new JButton(createNextButtonIcon());
externalnextbtn.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
getFieldText(CurrentRecord);
externalprevbtn.setEnabled(true);
if(CurrentRecord < MaxRecord){
++CurrentRecord;
setFieldText(CurrentRecord);
System.out.println(CurrentRecord);//Checking RECORD_NUM
if(CurrentRecord == MaxRecord){
externalnextbtn.setEnabled(false);
buttonpanel.add(externalnextbtn);
gotorecordbtn = new JButton("Go To Record", createGotoButtonIcon());
gotorecordbtn.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent evt){
* The text from the GotorecordTxt textfield will be taken and assigned
* to a temporary integer variable called Find.
int Find = Integer.parseInt(CustOrderIDTxt.getText());
for(int j=1; j <= MaxRecord; j++){
* Using a for loop, each record can be read using the readCustRecord
* method.
getFieldText(j);
* An if condition is utilized to check whether the temporary stored variable, Find,
* matches a field in a record. If this record is found, then using the RecordExists
* which was declared at the top, either a true or false statement can be assigned
* If the record exists, then a true statement will be assigned, if not a false
* statement will be assigned.
if(orderDetails[j].getCustOrderID() == Find){
RecordExists = true;
break;
}else{
RecordExists = false;
if(RecordExists == false){
* If the RecordExists is assigned a false statement, then a message will be
* displayed to show that the record does not exist.
JOptionPane.showMessageDialog(null, "Record Does Not Exist!", "Error Message", JOptionPane.ERROR_MESSAGE, createErrorIcon());
}else{
getFieldText(Find);
buttonpanel.add(gotorecordbtn);
return buttonpanel;
//TODO
public void setFieldText(int orderID){//TODO
orderDetails[orderID].setCustID(Integer.parseInt(CustIDTxt.getText()));
orderDetails[orderID].setCustOrderID(Integer.parseInt(CustOrderIDTxt.getText()));
orderDetails[orderID].setOrderDate(OrderedDateTxt.getText());
orderDetails[orderID].setInnerCustOrdObj(innerCustOrdObj);
orderDetails[orderID].setMaxItems(MaxItems);
setInnerFieldText(currentItem);
orderDetails[orderID].setGrandTotal(Float.parseFloat(GrandTotTxt.getText()));
public void setInnerFieldText(int currentItem){//TODO
innerCustOrdObj[currentItem] = new InnerCustOrdObject();
innerCustOrdObj[currentItem].setMaxItems(MaxItems);
innerCustOrdObj[currentItem].setItemNumber(Integer.parseInt(ItemNumberTxt.getText()));
innerCustOrdObj[currentItem].setUnitPrice(Float.parseFloat(UnitPriceTxt.getText()));
innerCustOrdObj[currentItem].setQuantityRequired(Integer.parseInt(QuantityReqTxt.getText()));
innerCustOrdObj[currentItem].setTotalPrice(Float.parseFloat(TotPriceTxt.getText()));
public void getFieldText(int orderID){
CustIDTxt.setText(Integer.toString(orderDetails[orderID].getCustID()));
CustOrderIDTxt.setText(Integer.toString(orderDetails[orderID].getCustOrderID()));
OrderedDateTxt.setText(""+orderDetails[orderID].getOrderDate());
currentItem = orderDetails[orderID].getMaxItems();
orderDetails[orderID].getInnerCustOrdObj();
System.err.println("currentItem" + currentItem);
//getInnerFieldText(currentItem);
GrandTotTxt.setText(Float.toString(orderDetails[orderID].getGrandTotal()));
public void getInnerFieldText(int currentItem){
ItemNumberTxt.setText(Integer.toString(innerCustOrdObj[currentItem].getItemNumber()));
UnitPriceTxt.setText(Float.toString(innerCustOrdObj[currentItem].getUnitPrice()));
QuantityReqTxt.setText(Integer.toString(innerCustOrdObj[currentItem].getQuantityRequired()));
TotPriceTxt.setText(Float.toString(innerCustOrdObj[currentItem].getTotalPrice()));
public void writeOrder(){//TODO
try {
objOut = new ObjectOutputStream(new FileOutputStream(OrderDetailsFile));
objOut.writeObject(orderDetails);
System.out.println("WORKING!");
objOut.flush();
objOut.close();
} catch (IOException e) {
e.printStackTrace();
public Object readOrder(){
Object temporaryObj;
try{
objIn = new ObjectInputStream(new FileInputStream(OrderDetailsFile));
temporaryObj = objIn.readObject();
CustOrdObject[] blah = (CustOrdObject[]) temporaryObj;
/* System.out.println("Outer: "+blah[1].getCustID());
InnerCustOrdObject[] whee = blah[1].getInnerCustOrdObj();
System.out.println("Inner: "+whee[1].getItemNumber());*/
objIn.close();
System.out.println("Read Worky!");
return temporaryObj;
}catch(Exception e){
e.printStackTrace();
System.out.println("Read No Worky!");
return null;
public void writeRecordNumber(int MaxRecord){
try{
objOut = new ObjectOutputStream(new FileOutputStream(OrdRecordNumStore));
objOut.writeObject(MaxRecord);
System.out.println("WORKING!");
objOut.flush();
objOut.close();
}catch(Exception e){e.printStackTrace();}
public int readRecordNumber() {
try {
objIn = new ObjectInputStream(new FileInputStream(OrdRecordNumStore));
int temporaryObj = Integer.parseInt(objIn.readObject().toString());
objIn.close();
System.out.println("Read Number Worky!");
return temporaryObj;
} catch (Exception e) {
e.printStackTrace();
System.out.println("Read Number No Worky!");
return -1;
}Message was edited by:
Kilik07 -
When I am using Pages or Numbers app on my ipad it has frozen up? I cannot edit, open any of the files. Then later I can which is what I am hoping with the document I just produced? Is it because it goes to the cloud?
This happens to me once in a while using Pages, but the "freeze" is very brief and I can usually just wait a short period of time and then the documents are accessible again. I have no idea what causes it, but it may be due to the fact that a file is being uploaded to iCloud as you suggest, but I don't know that for sure.
Sometimes I close Pages from the task bar (double tap the home button and tap and hold down on the Pages icon until it wiggles then tap the minus sign to close it, then tap the screen above the tsak bar.) And when I launch Pages again, it is back to normal. -
Problems with page and event paramters in java portlets
Hi there!
Following the documentation in "A primer on Portlet Parameters and events" and "Adding Parameters an Events to Portlets" I tried to develop two portlets (who will be at the same page), one showing some content of a repository (with possibilities to browse throw it) and another showing a sitemap of the repositories whole content, presenting links to the content's pages to be shown in the content portlet.
So I added:
1. a page parameter called pageMenuID to identify the current content page to be shown in the content portlet
2. an input parameter for content portlet called portletMenuID. This input parameter is mapped to the page parameter pageMenuID
3. an event for content portlet called changeContent with output parameter contentMenuID. When this event rises, "go to page" is set to the current page and the output parameter contentMenuID is mapped to the page parameter pageMenuID.
4. an event for sitemap portlet called changeContentFromSitemap with output parameter sitemapMenuID. When this event rises, "go to page" is set to the current page and the output parameter sitemapMenuID is mapped to the page parameter pageMenuID.
This is the code for some constants and a function to build the links in the content portlet, that I want to use:
// page parameter (shouldn't be used here)
private final static String pageParamMenuID = "pageMenuID";
// parameter names as given in providers.xml:
// portlet input parameter
private final static String inputParamMenuID = "portletMenuID";
// event name
private final static String eventName = EventUtils.eventName("changeContent");
// parameter name for event parameters
private final static String eventParamMenuID = EventUtils.eventParameter("contentMenuID");
String getEventUrl( PortletRenderRequest portletRequest, long menuID) {
NameValuePair[] eventParams = new NameValuePair[2];
eventParams[0] = new NameValuePair(eventName,"");
eventParams[1] = new NameValuePair(eventParamMenuID, "" + menuID);
try {
return PortletRendererUtil.constructLink(portletRequest, portletRequest.getRenderContext().getEventURL(),
eventParams,
true,
true);
} catch (Exception e) {
return "null";
This is the analog code from the sitemap portlet:
// page parameter defined on "edit page mode" (shouldn't be used here)
private final static String pageParamMenuID = "pageMenuID";
// parameter names as given in providers.xml:
// event name
private final static String eventName = EventUtils.eventName("changeContentFromSitemap");
// parameter name for event parameters
private final static String eventParamMenuID = EventUtils.eventParameter("sitemapMenuID");
String getEventUrl( PortletRenderRequest portletRequest, long menuID) {
NameValuePair[] eventParams = new NameValuePair[2];
eventParams[0] = new NameValuePair(eventName,"");
eventParams[1] = new NameValuePair(eventParamMenuID, "" + menuID);
try {
return PortletRendererUtil.constructLink(portletRequest, portletRequest.getRenderContext().getEventURL(),
eventParams,
true,
true);
} catch (Exception e) {
return "null";
But what actually happens is nothing. I also tried to construct the links with EventUtil.constructEventLink() with the same result. Checking the produced html-code in the browser shows that the same URLs are produced. So I'm of the opinion, that proper event links are created.
After checking the sent and received request parameters I came to the conclusion, that the event output parameters are never mapped to the page input paramters, as they should. So I changed the code to the following:
// page parameter (shouldn't be used here)
private final static String pageParamMenuID = "pageMenuID";
// parameter names as given in providers.xml:
// event name
private final static String eventName = EventUtils.eventName("changeContentFromSitemap");
// parameter name for event parameters
private final static String eventParamMenuID = EventUtils.eventParameter("sitemapMenuID");
String getEventUrl( PortletRenderRequest portletRequest, long menuID) {
NameValuePair[] eventParams = new NameValuePair[1];
eventParams[1] = new NameValuePair(pageParamMenuID, "" + menuID); <-- Note that the page parameter and not the event output parameter is used here -->
try {
return PortletRendererUtil.constructLink(portletRequest, portletRequest.getRenderContext().getEventURL(),
eventParams,
true,
true);
} catch (Exception e) {
return "null";
Now everything works fine, including addition of persistent private portlet parameters and further input/page/event parameters as well as working with a third portlet with performs a search (and presents the search results as links which change the content in content portlet).
But this is actually NOT the way it should work: The names of the page parameters are hard-coded in the portlets, so the roles of page designer and portlet developer are not separated in the way it is presented in the documentation. I coulnd't find a way to map the event output parameters to the page parameters to work this out.
Now I wonder whether there's some known bug in PDK or perhaps a mistake in the documentation or wether I'm just missing doing the right things. I've already read some postings in this forum concerning this problem (for example how to change the query??? but I think I've done all the things that are suggested there (checked the entries in provider.xml and the proper mapping of page parameters, public (input) portlet parameters and event output parameters, also the way I read the received request parameters and build the links)
Has anybody an idea what's wrong here?
Best regards
TorstenHi Amjad,
thank you very much for time and effort you spent on helping me solving this problem.
Unfortunately, I think I already tried what you suggest in your answer, but without success. From my experience, the following two calls:
1.
<%!
private static String eventName = "changeContent"
private static String eventParamID = "menuID"
String getEventUrl(PortalRenderRequest prr, long menuID) {
NameValuePair[] eventParams = new NameValuePair[1];
// no addition of eventName in the array
eventParams[0] = new NameValuePair(eventParamID, "" + menuID);
return EventUtils.constructEventLink(prr, eventName, eventParams, true, true);
%>
<a href="<%= getEventUrl(portletRequest, 1234) %>">some link for ID 1234</a>
2.
<%!
private static String eventName = EventUtils.eventName("changeContent");
private static String eventParamID = EventUtils.eventParameter("menuID");
String getEventUrl(PortalRenderRequest prr, long menuID) {
NameValuePair[] eventParams = new NameValuePair[2];
eventParams[0] = new NameValuePair(eventParamID, "" + menuID);
eventParams[0] = new NameValuePair(eventName,"");
return PortletRendererUtil.constructLink(prr, prr.getRenderContext().getEventURL(), eventParams, true, true);
%>
<a href="<%= getEventUrl(portletRequest, 1234) %>">some link for ID 1234</a>
produce identical links. I took the second way because it is easer to add private portlet parameters to the link: just as additional NameValuePairs in the eventParam- Array (name constructed with HttpPortletRendererUtil.portletParameter()), instead of constructing the link "by hand" as mentioned in the javadoc for constructEventLink(). I have to add these private portlet parameters here because when an event from a private parameters owning portlet is fired, the private parameters are lost (in difference to when an event from ANOTHER portlet is sent).
So I think, when you also look closely to the code snippet I added in the first posting, I made shure that I added the name of the event and not just the event parameters to the link.
I hope that I understood your answer right. Perhaps you have another idea what might be wrong. Thank you again,
best regards
Torsten -
Problem with path length when using oracle drive
Hello!
Does anybody else experience this problem with Oracle Drive?
When I create a deep or nested hierarchy in which the path length is longer than 250 (the limit might be 255) characters, I cannot access the deeper subpages.
Example:"X:\INET\START1\pfadlaengentest\das istein langer ordnername mit etwa 50 zeichen\and this is another veryveryvery long\and this is another veryveryvery lon2\and this is another veryveryvery lon3\and this is another veryveryvery lon4\and this is another veryveryvery lon5".
I can access the page "and this is another veryveryvery lon4" but not "and this is another veryveryvery lon5"
Is this problem due to WebDAV?
What can I do - I think it is a critical error / bug?
Regards Joerg.I opened a service request and oracle support could help me.
The problem is the windows file system: the path length cannot be longer than 256 chars.
There's a workaround with MS-Webfolders.
More information is available via metalink: watch out for SR-Number 5659267.992.
PS: Thanks to Bert
bye :-j (joerg) -
Problem with Log and transfer using AVCHD
Hello,
I was wondering if I can get help. I use a Canon Vixia HF S200 and FCP Version 6.0.6
I have produced projects on my MacBook Pro 2.33 Ghz Intel Core 2 using this process before with no problems in the past. This problem just started and I dont know what has changed. When I open the Log and Transfer (LT) window I can see and hear all my video from the AVCHD folder in my harddrive just fine, I can scrub with no prob.... But when I add clip to Queue I get an red circle with exclamation on my status.
I have changed the settings on the preferences to Apple intermediate Codec and the audio to plain stereo.. no luck there, the video still will not transfer to my bin.
I have made sure that the toggle Queue state was the little arrow instead of the paused icon...no luck there either... i got a message that says clip queued transferring but nothing is happening.
I will appreciate your help!
Also I didn't mean to tread jack earlier, please accept my apologies, if anybody saw that...OK!!!!! This seriously cost me 1 day of my life that I'll never get back!!! lol
So I was able to bring the footage in on to Imovie...Yes, I was that desperate...deadlines do that!
Edited the entire project there...kinda sucked...
Then I had the bright idea that if I was able to bring the videos in to Imovie, on my local HD...than something may be wrong with my scratch disk that I use on FC...its a USB disk, specs =slow.
So I changed the scratch disk and yes "Davi S" for good measure I also deleted the Pref files.
So it working again...here I go editing on FC after I edited the entire project on Imovie...
Thanks for all your help! -
Problems with pages and mail merging from Address Book
hey guys. I have just created an invitation using one of the templates in Pages. this template is for four postcard size invites on one sheet of A4. i want to merge addresses from my address book. i can do the merge except that rather than four different contacts on each page i end up with four of the same on each page before it moves on the next contact on the next page. what i want to do is for it to merge one address per postcard. in Word i would put 'next' as the last field in the merge fields but i cant find a similar command in Pages. please can some advice?
I don't use Address Book for mail merging, but I tested this on a four page document and it worked for that so maybe it will work for your postcards. First, do your merge with full size pages and one address per page. Then in the print menu select Layout (drop down from Copies and Pages) and set it for 4 per Page (any direction you wish). That should print four different addresses on one sheet.
Walt
Maybe you are looking for
-
I am a group exercise instructor and rely heavily on my playlists. My old phone is an iphone 4s and I just bought an Iphone 6. I also have a macbook where I keep my itunes account, but I create all my playlists on my phone. I need to transfer thos
-
Can I install Leopard on MacBook Air?
I have a MacBook Air running on OS 10.7.5. Recently it has been acting up, problems with fonts, e-mails, etc.. Actually I was never completely satisfied with this computer particularly if I compared it with a MacBook Pro running on OS 10.6.8 that wor
-
Problem in Overwriting SHIP-TO-ADDRESS at itme level.
Hi Experts, We are facing problem in Overwriting SHIP-TO-ADDRESS at itme level. Issue : Item level ship to address cannot be overwritten when item and header shipping is same. if item and header shipping address different then item shippi
-
How to password protect a page
I want to add a "members only" page to an existing website where the user would have to input a user name and password to gain access. Can anyone tell me how to set up such a system? Thanks, Stu
-
My new Mavericks OS has locked all my documents. How can I unlock them?
My new Mavericks has locked all my documents. How can I unlock them?