Problems with Pan and Zoom after video has been saved

I have Adobe Premiere Elements 13 and I am running into a problem when I want to use pan and zoom. I watched a video that said you needed to have the picture larger than the video frame so that you have room for panning and zooming. The problem I am running into is after I create a video and play it back you can see all of the picture that sticks out past the video frame. It doesn't show up when you are creating the movie. Here is an example:
I do have a video overlaying this photo. It is the pinkish color that you see here in this picture. It doesn't show any of the picture that extends beyond the sides, just on the top and bottom.
I have tried having a different sized video frame. I have tried saving it as several different formats and this happens every time. Any suggestions on how to fix this? Any help is appreciated. Thanks!

No, I am not concerned about the playback buttons. Maybe this pic will explain it better.
From my project. You can see that the picture is larger than the viewable area so that there is room for the pan to occur.

Similar Messages

Problem with Rescue and Recovery after installing Norton Internet Security 2010

Hi all.
It's my first time in this forum.
I have a problem, with Rescue and Recovery, after installing Norton Internet Security 2010 on my T43.
The message I get it:
"Rescue and Recovery is unable to back up the file 'C:\Documents and settings\all Users\Application Data\ Norton\ 00000082\00000109\000003c1\cltMLS1.bat' Because the file is either corrupted or being used by another application. Please close any application that could be using the file.
I tried to close the Norton but I couldn't find how.
Tanks
Doron71

Hi and welcome to the forum,
the reason for this situation is, that the antivir files are protected from being modified.
This is the reason, why this file cannot be backed up. I assume, that you would get much more such messages, as there are surelly multiple files files, that are protected like this.
So the solution is to block folders from being archived. Please start RnR application and in the configuration set this folder as the excluded one.
This will skip the backup of this file and will fix your situation.
Please let me know, if you have covered this.
Cheers

Problem with Facebook and instagram after istalling iOS 7.1. Can not open them!

Problem with Facebook and instagram after istalling iOS 7.1. Can not open them!

Hi Hanjon!
Here is an article that will help you troubleshoot these purchased apps:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/ts1702
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

How to forbid any further changes for PO (QTY and price ) after it has been

Hi,
How to forbid any further changes for PO (QTY and price ) after it has been done GR and LIV? Thanks.

Hi,
Price anyway cannot be changed once GR is posted on the PO item, it can be changed only by cancelling the GR, the same applies to IR too.
But quantity can be changed at any time.
So if you are looking at blocking qty too, then a customized message through save exit is the option, I am not aware of any standard SAP messages that can be configured to achieve this..
Ramesh

Can you set up a new I Tunes account, but still use the same email address, as having problems with it keep telling me it has been disabled, no matter what I do to chnage the passwords, I haven't used the account since 2010?

can you set up a new I Tunes account, but still use the same email address, as having problems with it keep telling me it has been disabled, no matter what I do to change the passwords, I haven't used the account since 2010?

Hi eddinchina,
You should have no need to use the Old Sync account.
As long as device or devices are Firefox 29 or later (They should all be Firefox 30 now) you should use the New Sync.
You may use the same email address with both accounts.

Problems with email and SMS after 1.3.5

Let me first say that I love the Pre. Up until this point it has been perfect - I have a replacement, but that is because I dropped it (wrong angle, wrong location, broken screen). However, following the 1.3.5 update I'm now having a fairly important problem with email and sms - I can receive email and messages, but not send them.
I have two email accounts. My personal account is with earthlink. My work account goes through an ISP using the domain name of my employer. I'm not using Microsoft Exchange or Outlook. I have tried deleting and reentering the accounts and that did not work. I can receive messages but get error messages when I try to send.
The same for messaging. I don't use it very often. But yesterday I get a text message and tried to respond and got the error message.
I power the phone off every night because I have a landline and use that as the primary phone at home.
I have been looking around message boards trying to find a fix for this. Has anyone had this issue and resolved it?
Thank you.
Post relates to: Pre p100eww (Sprint)
Message Edited by starburst42 on 01-05-2010 07:06 AM
This question was solved.
View Solution.

I forgot to add that this is a stock Pre. There are no patches or homebrew apps.
Edit:
I found a fix for the email problem, in posts on precentral and this board from a few months ago. The info came up in a Google search, and not searches of the boards, which is kind of frustrating. Here is the info, and the link. I really wish Palm would put info about this work around on their site, or at least make it easy for people to find. The solution is the last message in the thread linked below:
Had the same problem. Checked with Earthlink - no help. Checked with Sprint - no help. Checked with Palm - no help. Here is what finally worked:
Delete the earthlink account and start over. When you do - this is the key - set up the account manually! If you use the Pre defaults and try to change the settings it will not correct the problem. Your settings for outgoing mail must be:
"smtpauth.earthlink.net"
Use Authentication set to "on"
username is your email address
your email password
port set to "587"
encryption "none"
Again, the key is to set up manually.
smtp email fix
Message Edited by starburst42 on 01-06-2010 12:08 PM
Message Edited by starburst42 on 01-06-2010 12:09 PM

Can You Still Track YOur Iphone 5 With Ios7 Activation Lock After It Has Been Restored?

Please Help My Iphone 5 With IOS7 Activation Lock, Was Stolen And I Am Activately Tracking It and I Was Wondering If It Was Posssible To Keep Tracking IT After It Has Been Restored

It can't be restored unless the thief knows your Apple ID and password.
What To Do If Your iDevice or Computer Is Lost Or Stolen
iPhone, iPod Touch, and iPad
If you activated Find My Phone before it was lost or stolen, you can track it only if Wi-Fi is enabled on the device. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T. Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. What to do if your iOS device is lost or stolen
6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
7. Find My iPhone
8. Report Stolen iPad | Stolen Lost Found Online
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on iCloud
3. OS X Lion/Mountain Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)
Mac Computer
       Find My Mac can be used from Find My Phone at iCloud.com and via Find
       My Phone on your iDevice.
      The following is third-party anti-theft software:
           1. STEM 2.1
           2. MacPhoneHome 3.5
           3. MacTrack 7.5.0
           4. VUWER 1.7
           5. Sneaky Bastar* 0.2.0
           6. Undercover 5.1.1
           7. LoJack for Laptops
           8. Hidden 2.0

Problem with itunes and iphoto after time machine restoration

After an apocalyptic type meltdown in my hardrive the other night, I now have a new one. I have restored as much as I had backed up using time machine when I turned my computer back on for the first time. However in iphoto it lists all the different albums I have, but all the photos come up as grey squares. They are definitely on the computer as you can see them in the iphoto originals folder in the finder window.
A similar problem with itunes. My itunes library is totally blank, with no songs whatsoever. However the songs are there in itunes music folder.
How can I restore everything back to normal?
Matt

Look at Q15 here. http://pondini.org/TM/FAQ.html
There are separate sections for iphoto and itunes.
It has to be so complicated because Apple made TM to do too much and be too many things to too many people.. a horse designed by a committee. It has become flakey in later editions.
If you still have the iMac you can move the files directly from the source.. you don't need to use TM backups at all.

Problems with WRT54GS and EasyLink after adding Comcast Digital Voice.

I had a working network. Cable modem (Comcast), WRT54GS, 2 wired PCs (one XP/SP3, one Vista Home Edition SP1), 2 wireless laptop PCs (one XP/SP3, one Vista Home Edition SP1) and a HP OfficeJet 7210 printer (connected to WRT54GS as network printer). Everything was fine and worked.
Then, I added Comcast Digital Voice. Obviously, they switched the cable modem for a new cable modem with the phone service option. Now, I can't print to the OfficeJet from the wired Vista PC, and EasyLink displays "initializing" for as long as I'll wait (5+ minutes).
I finally have to kill EasyLink from the TaskManager. Any help or ideas appreciated!
Solved!
Go to Solution.

I solved the problem. It turns out the new cable modem and problem with EasyLink initializing were "red herrings".
The problem turned out to be a classic network problem! The hard-wired Vista PC had the wrong IP address. The wireless XP PC had the printer configured by network name instead of network (i.e. IP) address.
When I deleted the printer on the Vista PC and re-added it with the correct address everything worked fine.
Apparently the printer got a new IP address from the server on the WRT54GS after the installation of the new modem. Also, it looks like Vista doesn't report a communication error for a network printer, but does for a USB direct connect.

TS1741 Does anyone have trouble with the Remote app losing contact with the iTunes library after it has been connected and working fine for a while. If I go to the computer and turn off sharing, then turn it back on, it will relocate the library again.

My iTunes remote app on my ipad mini will work fine for a while and then it will lose the library. I then have to turn off sharing on the computer and then turn it back on. This will work for a while and then I will have to repeat the process. Help!

I have just found the problem to be windows firewall on my library PC
I can only presume there has been an update to windows firewall or iTunes
all the relevant programs were on the allowed list
I'm now currently running with firewall turned off on my library PC.
I'll update when i have found the rogue setting.

Sync problems with 3gs and itunes after update iOS 5.0

I am using a Vista PC with iTunes10.5. After updating my 3gs to iOS 5.0 I am not able to sync the phone. iTunes recognizes my iphone and then stays syncing at the backup stage....I deleted all my apps on the phone and deleted previous backups and tried syncing again, but in vain. I am clueless....

I just plugged it into my netbook and its Restoring it on there so thanks, I know I will lose what I never had backed up but just be happy if it works. Fingers crossed this fixes it.
Edit: It didnt work, come up with iTunes isnt connected to the internet then the restore fails

Application problems with pages and numbers after Yosemite install

Since upgrading to Yosemite and updating my applications, I have problems opening some documents in Pages and Numbers and get a message
You need a newer version of Numbers to open this spreadsheet.
I also have 2 icons for Pages? The old icon and the new?
When an upgrade occurs doesn't the old version normally get "absorbed" by the new version?
What do I need to do to resolve this?

There are other problems in Pages and Keynote and Numbers. When you use the Share tool, and choose Open In Another App...... no apps are listed except for iTunes U. This is an error, as there are several apps available on the ipad that open Pages. Also, in the Share tool, if I select Send a Copy, the email option is not available. We have checked with app developers who say they their most recent app version addresses this issue, but it doesn't.
We have tried to erase and reset the ipad, put everything back, and the problem still exists.

I am facing problem with wifi and cellular after update Apple iOS 8.0.2

How can we resolve the issue with wifi and cellular reception after update the iOS 8.2 on iPhone 5s 32 GB

Try some basic troubleshooting:
(A) Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
(B) Try reset all settings
Settings>General>Reset>Reset All Settings
(C) Setup as new (data will be lost if you do not have backup)
Settings>General>Reset>Erase all content and settings

IPhone 4 Can't receive incoming calls and sms after 3G has been activated

I can't receive incoming calls and sms on my iPhone 4 after the 3G connection has been activated and used actively by me. Outgoing calls and messages do work and as long as I use the Wi-Fi connection everything's fine but the problem appears after switching to 3G. Any help? Thx in advance!

I think the next step is to do a reset by holding the sleep and home buttons down at the same time until the Apple logo appears. If you haven't done this before, keep holding the buttons when the turn off slider appears. The screen will go black and after what seems like an eternity, actually several seconds, the Apple logo will appear. When the logo appears, release the buttons.

Problems with data cache plugin - The ResultList has been closed

I'm testing out the data cache to see if it helps some of my performance
problems, but I now get lots of exceptions that I didn't get before I
enabled the cache. Here's how I enabled it:
# CACHE
com.solarmetric.kodo.DataCacheClass=com.solarmetric.kodo.runtime.datacache.p
lugins.CacheImpl
com.solarmetric.kodo.RemoteCommitProviderClass=com.solarmetric.kodo.runtime.
event.impl.SingleJVMRemoteCommitProvider
The exception I'm getting follows. I'm curious if anyone has any insight
into what's going on? I'm sure there is a problem with my code, I'm
forgetting to close something or other but since it works fine without the
cache I'm really stuck as to what it is.
Thanks
Michael
22:17:32,792 ERROR ObjectFinder - Exception =
com.solarmetric.kodo.runtime.FatalUserException: The ResultList has been
closed.
NestedThrowables:
com.solarmetric.kodo.runtime.ClosurePoint: Closure point of object held in
embedded stack trace.
com.solarmetric.kodo.runtime.FatalUserException: The ResultList has been
closed.
NestedThrowables:
com.solarmetric.kodo.runtime.ClosurePoint: Closure point of object held in
embedded stack trace.
at
com.solarmetric.kodo.runtime.objectprovider.EagerResultList.checkClosed(Eage
rResultList.java:66)
at
com.solarmetric.kodo.runtime.objectprovider.EagerResultList.get(EagerResultL
ist.java:84)
at
com.solarmetric.kodo.runtime.datacache.query.CachingRandomAccessList.get(Cac
hingRandomAccessList.java:124)
at java.util.AbstractList$Itr.next(AbstractList.java:416)
at java.util.AbstractList.equals(AbstractList.java:604)
at serp.util.WeakCollection$WeakValue.equals(WeakCollection.java:123)
at java.util.HashMap.eq(HashMap.java:270)
at java.util.HashMap.removeEntryForKey(HashMap.java:525)
at java.util.HashMap.remove(HashMap.java:507)
at java.util.HashSet.remove(HashSet.java:198)
at serp.util.RefValueCollection.removeFilter(RefValueCollection.java:272)
at serp.util.RefValueCollection.remove(RefValueCollection.java:235)
at
com.solarmetric.kodo.runtime.datacache.query.QueryCacheImpl.unregisterClassC
hangeListener(QueryCacheImpl.java:160)
at
com.solarmetric.kodo.runtime.datacache.query.CachingRandomAccessList.abortCa
ching(CachingRandomAccessList.java:103)
at
com.solarmetric.kodo.runtime.datacache.query.CachingRandomAccessList.get(Cac
hingRandomAccessList.java:149)
at java.util.AbstractList$Itr.next(AbstractList.java:416)
at java.util.AbstractList.hashCode(AbstractList.java:624)
at serp.util.WeakCollection$WeakValue.<init>(WeakCollection.java:93)
at serp.util.WeakCollection.createRefValue(WeakCollection.java:64)
at serp.util.RefValueCollection.addFilter(RefValueCollection.java:193)
at serp.util.RefValueCollection.add(RefValueCollection.java:166)
at serp.util.RefValueCollection.add(RefValueCollection.java:157)
at
com.solarmetric.kodo.runtime.datacache.query.QueryCacheImpl.registerClassCha
ngeListener(QueryCacheImpl.java:151)
at
com.solarmetric.kodo.runtime.datacache.query.CachingRandomAccessList.<init>(
CachingRandomAccessList.java:76)
at
com.solarmetric.kodo.runtime.datacache.query.CacheAwareQuery.wrapList(CacheA
wareQuery.java:146)
at
com.solarmetric.kodo.runtime.datacache.query.CacheAwareQuery.execute(CacheAw
areQuery.java:270)
at
com.verideon.veriguard.persistence.ObjectFinder.getObjects(ObjectFinder.java
:62)
at
com.verideon.veriguard.persistence.ObjectFinder.getObject(ObjectFinder.java:
44)
at
com.verideon.veriguard.persistence.ObjectFinder.getRole(ObjectFinder.java:91
at
com.verideon.veriguard.services.VeriguardService.createCustomerAccount(Verig
uardService.java:210)
at
com.verideon.veriguard.services.TestVeriguardServiceMonitors.createTestUser(
TestVeriguardServiceMonitors.java:133)
at
com.verideon.veriguard.services.TestVeriguardServiceMonitors.setUp(TestVerig
uardServiceMonitors.java:80)
at junit.framework.TestCase.runBare(TestCase.java:125)
at junit.framework.TestResult$1.protect(TestResult.java:106)
at junit.framework.TestResult.runProtected(TestResult.java:124)
at junit.framework.TestResult.run(TestResult.java:109)
at junit.framework.TestCase.run(TestCase.java:118)
at junit.framework.TestSuite.runTest(TestSuite.java:208)
at junit.framework.TestSuite.run(TestSuite.java:203)
at
org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRu
nner.java:392)
at
org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.run(RemoteTestRunner.
java:276)
at
org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.main(RemoteTestRunner
..java:167)
NestedThrowablesStackTrace:
com.solarmetric.kodo.runtime.ClosurePoint: Closure point of object held in
embedded stack trace.
at
com.solarmetric.kodo.runtime.objectprovider.EagerResultList.close(EagerResul
tList.java:78)
at com.solarmetric.kodo.impl.jdbc.query.JDBCQuery.close(JDBCQuery.java:127)
at com.solarmetric.kodo.query.QueryImpl.closeAll(QueryImpl.java:637)
at
com.solarmetric.kodo.runtime.datacache.query.CacheAwareQuery.closeAll(CacheA
wareQuery.java:343)
at
com.solarmetric.kodo.runtime.PersistenceManagerImpl.closeQueries(Persistence
ManagerImpl.java:934)
at
com.solarmetric.kodo.runtime.PersistenceManagerImpl.close(PersistenceManager
Impl.java:914)
at
com.solarmetric.kodo.runtime.PersistenceManagerImpl.close(PersistenceManager
Impl.java:884)
at com.verideon.veriguard.services.PMService.close(PMService.java:120)
at com.verideon.veriguard.services.PMService.close(PMService.java:111)
at
com.verideon.veriguard.services.TestVeriguardServiceMonitors.deleteTestUser(
TestVeriguardServiceMonitors.java:127)
at
com.verideon.veriguard.services.TestVeriguardServiceMonitors.tearDown(TestVe
riguardServiceMonitors.java:103)
at junit.framework.TestCase.runBare(TestCase.java:130)
at junit.framework.TestResult$1.protect(TestResult.java:106)
at junit.framework.TestResult.runProtected(TestResult.java:124)
at junit.framework.TestResult.run(TestResult.java:109)
at junit.framework.TestCase.run(TestCase.java:118)
at junit.framework.TestSuite.runTest(TestSuite.java:208)
at junit.framework.TestSuite.run(TestSuite.java:203)
at
org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRu
nner.java:392)
at
org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.run(RemoteTestRunner.
java:276)
at
org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.main(RemoteTestRunner
..java:167)

Michael,
Could you send your test case to [email protected] so that we
can take a look at what's going on to cause this exception?
Thanks,
-Patrick
On Thu, 22 May 2003 17:18:50 -0400, Michael wrote:
I'm testing out the data cache to see if it helps some of my performance
problems, but I now get lots of exceptions that I didn't get before I
enabled the cache. Here's how I enabled it:
# CACHE
com.solarmetric.kodo.DataCacheClass=com.solarmetric.kodo.runtime.datacache.p
lugins.CacheImpl
com.solarmetric.kodo.RemoteCommitProviderClass=com.solarmetric.kodo.runtime.
event.impl.SingleJVMRemoteCommitProvider
The exception I'm getting follows. I'm curious if anyone has any
insight into what's going on? I'm sure there is a problem with my code,
I'm forgetting to close something or other but since it works fine
without the cache I'm really stuck as to what it is.
Thanks
Michael
22:17:32,792 ERROR ObjectFinder - Exception =
com.solarmetric.kodo.runtime.FatalUserException: The ResultList has been
closed.
NestedThrowables:
com.solarmetric.kodo.runtime.ClosurePoint: Closure point of object held
in embedded stack trace.
com.solarmetric.kodo.runtime.FatalUserException: The ResultList has been
closed.
NestedThrowables:
com.solarmetric.kodo.runtime.ClosurePoint: Closure point of object held
in embedded stack trace.
at
com.solarmetric.kodo.runtime.objectprovider.EagerResultList.checkClosed(Eage
rResultList.java:66)
at
com.solarmetric.kodo.runtime.objectprovider.EagerResultList.get(EagerResultL
ist.java:84)
at
com.solarmetric.kodo.runtime.datacache.query.CachingRandomAccessList.get(Cac
hingRandomAccessList.java:124)
at java.util.AbstractList$Itr.next(AbstractList.java:416) at
java.util.AbstractList.equals(AbstractList.java:604) at
serp.util.WeakCollection$WeakValue.equals(WeakCollection.java:123) at
java.util.HashMap.eq(HashMap.java:270) at
java.util.HashMap.removeEntryForKey(HashMap.java:525) at
java.util.HashMap.remove(HashMap.java:507) at
java.util.HashSet.remove(HashSet.java:198) at
serp.util.RefValueCollection.removeFilter(RefValueCollection.java:272)
at serp.util.RefValueCollection.remove(RefValueCollection.java:235) at
com.solarmetric.kodo.runtime.datacache.query.QueryCacheImpl.unregisterClassC
hangeListener(QueryCacheImpl.java:160)
at
com.solarmetric.kodo.runtime.datacache.query.CachingRandomAccessList.abortCa
ching(CachingRandomAccessList.java:103)
at
com.solarmetric.kodo.runtime.datacache.query.CachingRandomAccessList.get(Cac
hingRandomAccessList.java:149)
at java.util.AbstractList$Itr.next(AbstractList.java:416) at
java.util.AbstractList.hashCode(AbstractList.java:624) at
serp.util.WeakCollection$WeakValue.<init>(WeakCollection.java:93) at
serp.util.WeakCollection.createRefValue(WeakCollection.java:64) at
serp.util.RefValueCollection.addFilter(RefValueCollection.java:193) at
serp.util.RefValueCollection.add(RefValueCollection.java:166) at
serp.util.RefValueCollection.add(RefValueCollection.java:157) at
com.solarmetric.kodo.runtime.datacache.query.QueryCacheImpl.registerClassCha
ngeListener(QueryCacheImpl.java:151)
at
com.solarmetric.kodo.runtime.datacache.query.CachingRandomAccessList.<init>(
CachingRandomAccessList.java:76)
at
com.solarmetric.kodo.runtime.datacache.query.CacheAwareQuery.wrapList(CacheA
wareQuery.java:146)
at
com.solarmetric.kodo.runtime.datacache.query.CacheAwareQuery.execute(CacheAw
areQuery.java:270)
at
com.verideon.veriguard.persistence.ObjectFinder.getObjects(ObjectFinder.java
:62)
at
com.verideon.veriguard.persistence.ObjectFinder.getObject(ObjectFinder.java:
44)
at
com.verideon.veriguard.persistence.ObjectFinder.getRole(ObjectFinder.java:91
at
com.verideon.veriguard.services.VeriguardService.createCustomerAccount(Verig
uardService.java:210)
at
com.verideon.veriguard.services.TestVeriguardServiceMonitors.createTestUser(
TestVeriguardServiceMonitors.java:133)
at
com.verideon.veriguard.services.TestVeriguardServiceMonitors.setUp(TestVerig
uardServiceMonitors.java:80)
at junit.framework.TestCase.runBare(TestCase.java:125) at
junit.framework.TestResult$1.protect(TestResult.java:106) at
junit.framework.TestResult.runProtected(TestResult.java:124) at
junit.framework.TestResult.run(TestResult.java:109) at
junit.framework.TestCase.run(TestCase.java:118) at
junit.framework.TestSuite.runTest(TestSuite.java:208) at
junit.framework.TestSuite.run(TestSuite.java:203) at
org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRu
nner.java:392)
at
org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.run(RemoteTestRunner.
java:276)
at
org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.main(RemoteTestRunner
.java:167)
NestedThrowablesStackTrace:
com.solarmetric.kodo.runtime.ClosurePoint: Closure point of object held
in embedded stack trace.
at
com.solarmetric.kodo.runtime.objectprovider.EagerResultList.close(EagerResul
tList.java:78)
at
com.solarmetric.kodo.impl.jdbc.query.JDBCQuery.close(JDBCQuery.java:127)
at com.solarmetric.kodo.query.QueryImpl.closeAll(QueryImpl.java:637) at
com.solarmetric.kodo.runtime.datacache.query.CacheAwareQuery.closeAll(CacheA
wareQuery.java:343)
at
com.solarmetric.kodo.runtime.PersistenceManagerImpl.closeQueries(Persistence
ManagerImpl.java:934)
at
com.solarmetric.kodo.runtime.PersistenceManagerImpl.close(PersistenceManager
Impl.java:914)
at
com.solarmetric.kodo.runtime.PersistenceManagerImpl.close(PersistenceManager
Impl.java:884)
at com.verideon.veriguard.services.PMService.close(PMService.java:120)
at com.verideon.veriguard.services.PMService.close(PMService.java:111)
at
com.verideon.veriguard.services.TestVeriguardServiceMonitors.deleteTestUser(
TestVeriguardServiceMonitors.java:127)
at
com.verideon.veriguard.services.TestVeriguardServiceMonitors.tearDown(TestVe
riguardServiceMonitors.java:103)
at junit.framework.TestCase.runBare(TestCase.java:130) at
junit.framework.TestResult$1.protect(TestResult.java:106) at
junit.framework.TestResult.runProtected(TestResult.java:124) at
junit.framework.TestResult.run(TestResult.java:109) at
junit.framework.TestCase.run(TestCase.java:118) at
junit.framework.TestSuite.runTest(TestSuite.java:208) at
junit.framework.TestSuite.run(TestSuite.java:203) at
org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRu
nner.java:392)
at
org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.run(RemoteTestRunner.
java:276)
at
org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.main(RemoteTestRunner
.java:167)--
Patrick Linskey
SolarMetric Inc.

Problems with Pan and Zoom after video has been saved

Similar Messages

Maybe you are looking for