Problems with parameters of extractor 2LIS_13_VDITM

Hi experts,
The parameter FKDAT (Billing date for billing index and printout) for the extractor 2LIS_13_VDITM is not working, if i try an execute a full load, selected an specify dates selection, returns 0 records.
In the transaction RSA3, i put the parameters, and the extractor ignore the parameters and showme all the data.
When i execute a test in RSA3, without parameters, the extractor show me all the information.
V R3: 4.6C
V BW: 3.0B
Do you have idea what can be happening?.
Regards,
Angelica

Miguel
You said to tried using values on FKDT and without value in RSA3 and in both cases you are getting the same records.
Did you actually check the output see those two diff set of records to make sure that none of them are restricted to your condition.
Some time RSA3 is not just good enough if you want to varify some conditions. RSA3 returns records depending upon extrator calls settings only. when it reach to that level it doesn't even look after that point.
Did u actually tried your conditions in BW side
Thanks

Similar Messages

Problem with parameterized reports in InfoView interface with Russian local

Please, help!
We have a problem with users, who have u201CRussianu201D as Info View portal interface language. Users have problems with reports which are parameterized. When user tries to select a custom date he gets prompt with incorrect template "Enter Date Report: - jj.nn.aaaa H:mm:ss". As a result the report is not updated. If User uses English interface all is OK.

Maksim,
Could you provide the following info:
1) BOE XIR2 or BOE XI3.1?
2) Which Patch-level?
3) Are you using the JAVA infoview or .NET infoview?
4) Which kinds of reports are you attempting to put the custom date range in (CR, Webi, Deski)
Thanks!
-Brian

Recursive & Loadable WD-Tree-Tutorial: Problems with parameters; NullPointe

Hello all, it's me again
This time I have a problem with the Tutorial called "Constructing a Recursive and Loadable WD-Tree". I followed each step in detail, but when I deploy it all I see several errors/mistakes in my resulting App:
1. I can click on the "directories" in this example and the directory-text is displayed in the InputForm. Normally it should only display "filenames", not directory-names... I checked the bool-properties in the addChildren-method and they are set as it's said in the tut.
2. When I try to expand any of the two nodes (C or Games; D is already expanded and includes "Games") I get a NullPointerException for the addChildren()-method in the first line (parent.nodeChildNode();). So the parameter "parent" is null or does at least not contain what it's expected to.
3. I have some Warnings: "TreeNodeType 'onAction.onAction': Parameters of action 'Select' and event 'onAction' are not compatible" and the same again for the second action (LoadChildren). So perhaps problem 2 can be solved by solving no 3?!
I'm stuck. Can anyone help me please?
I doublechecked that everything is as said in the tutorial.
Regards
Michael

Hi
I realized I had an "Warning"-Message at my View-Context-Root-Node, where it said "Migrate Context". After I did this I get an "internal server error", Failed to process request.
Hmm, it seems as if there were a lot of changes from NW2004 to NW7.1, cause when I try to deploy the ready-to-deploy-tutorial (downloadable along with the Initial project template from SDN) I get deployment errors.
So I'll stop it now or perhaps try my own implementation (with java.io.File and recursive methods and loadable tree) to get familiar with the tree-thing in WD/Java
Thanks so far for the help, it's greatly appreciated.
Michael

Issue With R/3 Extractor 2LIS_13_VDITM and 2LIS_11_VAITM during Delta Updat

Hi all,
We are using 2LIS_13_VDITM and 2LIS_11_VAITM Datasources to upload sales overview cube directly as well as a custome ODS seperately using Direct Delta method.
Now first time upload was perfect(Initialization) but if any changes are made to the existing data or if any new entries are entered in the source system, R/3 extractor (2LIS_13_VDITM and 2LIS_11_VAITM) is not pulling those records.
Once we tried deleting SETUP table and reloaded it, extractor was able to pull the records but again the issue crops up for any new entries or changes made in source system.
This is stopping us from completing the project. So any suggestions the would help us solving the issue is most welcome.
Regards,
Surendhar.

Hi,
If you have selected the 'Queue delta' Update method for applications 11 and 13,then make sure that the "update" job is scheduled to move the data from LBWQ to RSA7. Once the data available in RSA7, you can execute the infopackage with delta load.
If you have selected the 'Direct delta' Update method for applications 11 and 13,then there is no need of "update" job to move the data from LBWQ to RSA7. Once the data available in RSA7, you can execute the infopackage with delta load.
With rgds,
Anil Kumar Sharma .P

Problem with parameters and non table based items

Hi,
I have a situation where I have some not table based items on a page (shuttles and select lists). It is parameters that the end user inputs. I have another page with the same items just here they are Display Only and also not table based. When the user press a button I branch from page 1 to page 2 and set the items on page 2. My problem is that the input the user keys in are not copied to the items on page 2. I can see the data in the session state.
I assume that this is a silly question and I have just set Source Used or Source Type wrong one one of the items but I can not get it working. Can anybody help?
It works fine if I use a Application Item and creates a process on page 1 where I copy the item value from the session state but that should be needed right?
Regards Pete

Thanks Scott,
I think I got it working. If I remove all the colons from the data it works. I select several entries in a Shuttle and the result is a colon delimited string of values. If I remove these in a process it works fine. Is there a way of escaping the output from a Shuttle?
Regards Pete

Problem with parameters in Data Template

Hello,
I created some reports using the data template and didn't have any problems. I wanted to change the name of a couple of my parameters and now I can't get any data returned in my reports. If I remove the parameters data is returned or if I rename the parameters to something else data is returned. It seems like it has something to do with these two names of the parameters that I'm using that is causing the report not to run, but I have no idea why or where to even look.
Here is my example report:
With parameter names P_JUR and P_TAXYR my report runs without any problems.
<dataTemplate name="test" description="test Report">
     <parameters>
          <parameter name="P_JUR" dataType="character"/>
          <parameter name="P_TAXYR" dataType="number"/>
     </parameters>
     <dataQuery>
          <sqlStatement name="RP"><![CDATA[select p.jur, p.parid, p.taxyr,
       p.luc, p.nbhd, o.own1, p.adrno,
       p.adrdir||decode(p.adrdir,'','',' ')||p.adrstr||decode(p.adrsuf,'','',' ')||p.adrsuf addr
        from pardat p, owndat o
where p.jur = o.jur
   and p.parid = o.parid
   and p.taxyr = o.taxyr
   and p.cur = o.cur
     and p.cur = 'Y'
   and p.jur = :p_jur
   and p.taxyr = :p_taxyr
and rownum < 10]]></sqlStatement>
     </dataQuery>
     <dataTrigger name="beforeReport" source="bipub.SETUSERIDSESSION(:P_USERNAME)"/>
     <dataStructure>
          <group name="RP" source="RP">
               <element name="JUR" value="JUR"/>
               <element name="PARID" value="PARID"/>
               <element name="TAXYR" value="TAXYR"/>
               <element name="CMAP" value="CMAP"/>
               <element name="LUC" value="LUC"/>
               <element name="OWN1" value="OWN1"/>
               <element name="NBHD" value="NBHD"/>
               <element name="ADRNO" value="ADRNO"/>
               <element name="ADDR" value="ADDR"/>
          </group>
     </dataStructure>
</dataTemplate>
As soon as I change my parameters and remove the "P_" - changed to JUR and TAXYR my report no longer returns data:
<dataTemplate name="test" description="test Report">
     <parameters>
          <parameter name="JUR" dataType="character"/>
          <parameter name="TAXYR" dataType="number"/>
     </parameters>
     <dataQuery>
          <sqlStatement name="RP"><![CDATA[select p.jur, p.parid, p.taxyr,
       p.luc, p.nbhd, o.own1, p.adrno,
       p.adrdir||decode(p.adrdir,'','',' ')||p.adrstr||decode(p.adrsuf,'','',' ')||p.adrsuf addr
        from pardat p, owndat o
where p.jur = o.jur
   and p.parid = o.parid
   and p.taxyr = o.taxyr
   and p.cur = o.cur
     and p.cur = 'Y'
   and p.jur = :jur
   and p.taxyr = :taxyr
and rownum < 10]]></sqlStatement>
     </dataQuery>
     <dataTrigger name="beforeReport" source="bipub.SETUSERIDSESSION(:P_USERNAME)"/>
     <dataStructure>
          <group name="RP" source="RP">
               <element name="JUR" value="JUR"/>
               <element name="PARID" value="PARID"/>
               <element name="TAXYR" value="TAXYR"/>
               <element name="CMAP" value="CMAP"/>
               <element name="LUC" value="LUC"/>
               <element name="OWN1" value="OWN1"/>
               <element name="NBHD" value="NBHD"/>
               <element name="ADRNO" value="ADRNO"/>
               <element name="ADDR" value="ADDR"/>
          </group>
     </dataStructure>
</dataTemplate>
I know it's getting my values because when I run the report I get this output:
<?xml version="1.0" encoding="UTF-8" ?>
- <TEST>
<JUR>040</JUR>
<TAXYR>2008.0</TAXYR>
<LIST_RP />
</TEST>
I can change the parameter names to BOB, TOM, A, B, C, etc. and the report runs fine. It's just those two parameters JUR and TAXYR that do not work. I'm integrating this with another system which is why it's important is uses JUR and TAXYR. Anyone have any idea where to check or what I can check to see why it wouldn't work with only those two parameter names?
Thanks

Always keep the parameter name with some standard :) to avoid these kind of issues.
keep PARAM_XYZ
like PARAM_TZXYR , PARAM_JUR

Problem with parameters to fix opening of old tabs and saving files when a new session is open

Hello,
Since 2 weeks I have a problem: I always fix my parameters to restore previous session with all my tabs and I choose that Firefox asks me where I want to save my downloaded files. Now each time I close Firefox and I reopen it, it is not taken into account, and 3 tabs are opened: Firefox, Google and Thank to install Zotero! I rechange it, but every time it opens these tabs and not my old tabs. The same for saving files. It goes back automatically to open start page and to save my file in Downloads. Even if I rechange, it comes back the same.
I desinstalled CCleaner (I thought it could be that) but nothing changes!
Please help. Thank you very much!
Martha

Here's what I would try:
*Reset Firefox - this should fix the issue but it will change settings like where files are downloaded and what tabs open at startup back to their defaults.
*Then change your download and session restore preferences back to how you like them.
Here's how:
#Go to Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
#Open the options window - Tools > Options > General
#In the General panel set Firefox to open your tabs from last time and set Firefox to ask you where to save downloads.
#Click OK
That should do it. Let me know if this worked.
Thanks,<br>
Michael

Problem with 0FI_GL_4 Delta extractor

hi everyone,
I have encountered a problem when using 0FI_GL_4 delta extractor.
As I had changed the settings in table BWOM_SETTINGS according to note 485958, the datasource should be able to extract FI lines up to the day I run the extractor.
Here is the problem:
At 1st March, 01:18 am, I ran the extractor and get some records.
I found that FI lines with createdon date later than 29th Feb 16:00 were not extracted to BW. According to that note, shouldn't I get all FI lines created on 29th Feb?
After 30 minutes, I ran the extractor again. These records came to BW this time. That's strange.
My settings in table BWOM_SETTINGS:
     EXTLOG
     ORGSYSONLY
     NOTSSELECT
     OBJSELSIZE     X
     FLAG_AL
     OBJCURTYPE     10
     BWFILOWLIM     19910101
     BWFISAFETY     1
     BUFFERREF
     OBJSELSICO     X
     BWFITIMBOR     020000
     BWFIOVERLA     X
     DELTIMEST     60
     PRICECOMP     X
Thanks for your help!

Hi,
I agree with Murali as your are extracting data before 02.00 AM the data till yesterday will be extracted.
Check the below link for more information,
[http://help.sap.com/saphelp_bw33/helpdata/en/af/16533bbb15b762e10000000a114084/content.htm]
but as per your another post the second extraction happened before 0200, just cross check one thing that the time noted was not from local machine but was from app server.
Rgards,
Durgesh.

Problem with parameters in xsl

Hi there,
I have some trouble to use parameters or varaibles between models.
Here is my xml file format :
<ROOT>
<PARAM>
<NAME>NUMBER_STATION</NAME>
<TYPE>INT</TYPE>
<VAL>20</VAL>
</PARAM>
<PARAM>
<NAME>NAME_STATION</NAME>
<TYPE>TEXT</TYPE>
<VAL>LAX</VAL>
</PARAM>
</ROOT>
What I would like to do in the xsl code is to deal with PARAM differently if TYPE is INT or TEXT.
Here is my xsl code :
<xsl:stylesheet
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:java="java"
xmlns:display="base.Display"
version="1.0">
<xsl:param name="name_p">0</xsl:param>
<xsl:param name="type_p">INT</xsl:param>
<xsl:output method="html" />
<xsl:template match="/">
<xsl:apply-templates select="ROOT/PARAM[NAME=$name_p]/TYPE" />
<xsl:apply-templates select="ROOT/PARAM[NAME=$name_p]/VAL" />
</xsl:template>
<xsl:template match="TYPE">
<xsl:variable name="type_p" select="text()"/>
</xsl:template>
<xsl:template match="VAL">
<xsl:choose>
<xsl:when test="$type_p = 'POURCENT'">
<td>
</td>
</xsl:when>
<xsl:otherwise>
<td>
</td>
</xsl:othewise>
</xsl:choose>
</xsl:template>
But of course this is not working...I also tried to use <xsl:call-template> with a parameter but without sucess. Does anybody have some idear about that ?
Thanks in advance !

"Not working" is not much information to go on. So I will just throw out some ideas. First make sure you are actually passing the parameters to your transform. Second, use XPath expressions that actually select something from your XML. The ones you are using are looking for a TYPE element that's the child of a PARAM element (that has a NAME child with a particular value), and there are no such elements in your example.
PC²

Problems with parameterized Url

Hey,
can anybody help me?
I created following URL with 4 filter values:
http://XXX/sap/bw/BEx?sap-language=EN&bsplanguage=EN&CMD=LDOC&TEMPLATE_ID=my_template& FILTER_IOBJNM_1=0SOLD_TO&FILTER_VALUE_1=123&FILTER_IOBJNM_2=0CO_AREA&FILTER_VALUE_2=123&FILTER_IOBJNM_3=0COMP_CODE&FILTER_VALUE_3=123&FILTER_IOBJNM_4=0SALESORG&FILTER_VALUE_4=123
When I execute the url in browser a screen with filter value selection appears. I created the template with WAD 3.x - with WAD 7.0 it doesn't work. Do I have to use other parameters here?
Best regards,
Jule

Hi Jule,
I am facing issuse of URl length
We pass the parameters in the URL for new 7.x machine. Unfortunately we are running more than 3000 characters, whereas system is allowing upto 2083 characters. Please do needful.
&BI_COMMAND_1-BI_COMMAND_TYPE=SET_SELECTION_STATE_SIMPLE
&BI_COMMAND_1-TARGET_DATA_PROVIDER_REF_LIST-TARGET_DATA_PROVIDER_REF_1=DATAPROVIDER_1
&BI_COMMAND_1-TARGET_DATA_PROVIDER_REF_LIST-TARGET_DATA_PROVIDER_REF_2=DATAPROVIDER_2
&BI_COMMAND_1-TARGET_DATA_PROVIDER_REF_LIST-TARGET_DATA_PROVIDER_REF_3=DATAPROVIDER_3
&BI_COMMAND_1-TARGET_DATA_PROVIDER_REF_LIST-TARGET_DATA_PROVIDER_REF_4=DATAPROVIDER_4
&BI_COMMAND_1-TARGET_DATA_PROVIDER_REF_LIST-TARGET_DATA_PROVIDER_REF_5=DATAPROVIDER_1_2
&BI_COMMAND_1-RANGE_SELECTION_OPERATOR=EQUAL_SELECTION
&BI_COMMAND_1-RANGE_SELECTION_OPERATOR-EQUAL_SELECTION=MEMBER_NAME
&BI_COMMAND_1-RANGE_SELECTION_OPERATOR-EQUAL_SELECTION-MEMBER_NAME=0000000000000000000000000000000080000020
&BI_COMMAND_1-CHARACTERISTIC=ZCRMPRDL1
&BI_COMMAND_2-BI_COMMAND_TYPE=SET_ITEM_PARAMETERS
&BI_COMMAND_2-INIT_PARAMETERS-WITH_TRAY-TRAY_SETTINGS-CAPTION=AstroMonthlyBacklogofOpenBugs
&BI_COMMAND_2-INIT_PARAMETERS-WITH_TRAY=X
&BI_COMMAND_2-INIT_PARAMETERS-TITLE=AstroMonthlyBacklogofOpenBugs
&BI_COMMAND_2-TARGET_ITEM_REF=CHART_1
&BI_COMMAND_3-BI_COMMAND_TYPE=SET_ITEM_PARAMETERS
&BI_COMMAND_3-INIT_PARAMETERS-WITH_TRAY-TRAY_SETTINGS-CAPTION=AstroMonthlyBacklogofOpenBugs
&BI_COMMAND_3-INIT_PARAMETERS-WITH_TRAY=X
&BI_COMMAND_3-TARGET_ITEM_REF=TABLE_1
&BI_COMMAND_4-BI_COMMAND_TYPE=SET_ITEM_PARAMETERS
&BI_COMMAND_4-INIT_PARAMETERS-WITH_TRAY-TRAY_SETTINGS-CAPTION=AstroWeightedDefectCount(WDC)ofOpenCustomerBugs
&BI_COMMAND_4-INIT_PARAMETERS-WITH_TRAY=X
&BI_COMMAND_4-INIT_PARAMETERS-TITLE=AstroWeightedDefectCount(WDC)ofOpenCustomerBugs
&BI_COMMAND_4-TARGET_ITEM_REF=CHART_2
&BI_COMMAND_5-BI_COMMAND_TYPE=SET_ITEM_PARAMETERS
&BI_COMMAND_5-INIT_PARAMETERS-WITH_TRAY-TRAY_SETTINGS-CAPTION=AstroWeightedDefectCount(WDC)
&BI_COMMAND_5-INIT_PARAMETERS-WITH_TRAY=X
&BI_COMMAND_5-TARGET_ITEM_REF=TABLE_2
&BI_COMMAND_6-BI_COMMAND_TYPE=SET_ITEM_PARAMETERS
&BI_COMMAND_6-INIT_PARAMETERS-WITH_TRAY-TRAY_SETTINGS-CAPTION=AstroMonthlyIncomingRateofBugs
&BI_COMMAND_6-INIT_PARAMETERS-WITH_TRAY=X
&BI_COMMAND_6-INIT_PARAMETERS-TITLE=AstroMonthlyIncomingRateofBugs
&BI_COMMAND_6-TARGET_ITEM_REF=CHART_3
&BI_COMMAND_7-BI_COMMAND_TYPE=SET_ITEM_PARAMETERS
&BI_COMMAND_7-INIT_PARAMETERS-WITH_TRAY-TRAY_SETTINGS-CAPTION=AstroMonthlyIncomingRateofBugs
&BI_COMMAND_7-INIT_PARAMETERS-WITH_TRAY=X
&BI_COMMAND_7-TARGET_ITEM_REF=TABLE_3
&BI_COMMAND_8-BI_COMMAND_TYPE=SET_ITEM_PARAMETERS
&BI_COMMAND_8-INIT_PARAMETERS-WITH_TRAY-TRAY_SETTINGS-CAPTION=AstroIncoming/ResolvedRatio-CustomerProductionBugs
&BI_COMMAND_8-INIT_PARAMETERS-WITH_TRAY=X
&BI_COMMAND_8-INIT_PARAMETERS-TITLE=AstroIncoming/ResolvedRatio-CustomerProductionBugs
&BI_COMMAND_8-TARGET_ITEM_REF=CHART_6
&BI_COMMAND_9-BI_COMMAND_TYPE=SET_ITEM_PARAMETERS
&BI_COMMAND_9-INIT_PARAMETERS-WITH_TRAY-TRAY_SETTINGS-CAPTION=AstroIncoming/ResolvedRatio-CustomerProductionBugs
&BI_COMMAND_9-INIT_PARAMETERS-WITH_TRAY=X
&BI_COMMAND_9-TARGET_ITEM_REF=TABLE_6
&BI_COMMAND_10-BI_COMMAND_TYPE=SET_ITEM_PARAMETERS
&BI_COMMAND_10-INIT_PARAMETERS-WITH_TRAY-TRAY_SETTINGS-CAPTION=AstroIncomingSupportCalls
&BI_COMMAND_10-INIT_PARAMETERS-WITH_TRAY=X
&BI_COMMAND_10-INIT_PARAMETERS-TITLE=AstroIncomingSupportCalls
&BI_COMMAND_10-TARGET_ITEM_REF=CHART_4
&BI_COMMAND_11-BI_COMMAND_TYPE=SET_ITEM_PARAMETERS
&BI_COMMAND_11-INIT_PARAMETERS-WITH_TRAY-TRAY_SETTINGS-CAPTION=AstroIncomingSupportCalls
&BI_COMMAND_11-INIT_PARAMETERS-WITH_TRAY=X
&BI_COMMAND_11-TARGET_ITEM_REF=TABLE_4

URGENT - Problems with 0SRM standard extractors

Hi all,
I have the following issue which is now really blocking for me.
I tried to use the new SRM 5.x extractors 0SRM_TD_CF, 0SRM_TD_PO, 0SRM_TD_PO_ACC but I got the following dump when testin through RSA3.
Runtime Errors CREATE_DATA_UNKNOWN_TYPE
Except. CX_SY_CREATE_DATA_ERROR
CREATE DATA: The specified type "\PROGRAM=GP46ACP8LVJXGTI62I0SR" is no valid.
We are running SRM Server 5.5 - SP 6 and BI7.
I chased some OSS notes but found nothing related to this problem.
Please any feedback on this error? It is very urgent.
Thanks
Chris

Hi,
Finally, we got the solution and fixed this issue:
This is a problem of data object length. Please proceed as follow:
- Go in function module named BBP_BI_GEX_CONSOLIDATE.
- Find lv_struc_name and access the declaration.
- Change v_struc_name TYPE char30 to v_struc_name TYPE char200.
- Activate.
Do the same in module fonction named BBP_BI_GEX_DENORMALIZE.
This will fix the issue for all 0SRM extractors (PO, GR, PO Acc, IV).
FYI, we requested the creation of a sap note as this fix above is a modification of the standard.
I am sure that helps.
Regards

Problems with parameterized mapping in BPM

Hi
I am using an RFC lookup in a message mapping. I have declared the parameters/bindings in Message Mapping and Operations Mapping, but when I use the Operations Mapping in a transformation step in my BPM, I am asked for an "import" value. There are no values to be selected. What do I do?
Thanks!
regards Ole

In your integration process, define the import parameter under Configurable Parameters category.
http://help.sap.com/saphelp_nwpi71/helpdata/en/44/1f1a5c932d0d19e10000000a114a6b/frameset.htm
Regards,
Prateek

Problems with parameterized custom tags - urgent

Hi All,
I am not able to retrieve my attribute values in Tag Support Class?
it doesn't give any errors while compiling and also the tag works without those attributes. I am able to print some html using the same tag but not able to print the passed attribute values?
any help is highly appreciated!
Thank You.....:-)

Thanks for the response!
Infact I figured it out and made it working but still it's a question to me.
Change I have made in my .tld file is making rtexprvalue to true - "<rtexprvalue>true</rtexprvalue>".
As per documentation it should matter but bcoz of this setting to false I was not able to retrieve.
Anyways Thanks again & Have a Good Day.....:-)

HOST PJC with parameters

Hello,
Does HOST PJC (OTN samples) support parameters ?
It is working well on client, but I have problem with parameters, and the same time it is working and it can run application.
For example I need run some application from client site :
"C:\Application.exe Param1 Param2".
System running this application, but it doesn't take parameters.
Thank You

Is here any HOST PJC developers ?
How can I use HOST PJC with parameters ?
Thank You

Problem with function utl_smtp.mail

utl_smtp.mail(connection,sender,parameters)
Problem with parameters.
How to define additional parameters.
null

Additional parameters to the SMTP MAIL command is defined in RFC 1869 (SMTP Service Extension). To use additional parameters in the MAIL command following the extension protocol, make sure that you handshake with the SMTP server with the EHLO command instead of HELO command. The format of the parameters is list of space-delimited name-vlaue pairs, <name>=<value> [<name>=<value> ...]. For example, utl_smtp.mail(conn, sender, 'BODY=8BITMIME').

Problems with parameters of extractor 2LIS_13_VDITM

Similar Messages

Maybe you are looking for