Problems with Partner determination in activities generated from call list

In our scenario we are using IC Win Client 5.0.
During the generation of the call list it to my understanding that when a call is scheduled for a Business Partner a corresponding activity is created and linked to the call. It is in this process that the partner determination procedure for the linked activity kicks in and should determine the BP from the sceduled call and fill the field 'Sold-to-Party' in the activity.
However this is not working!! I have tested basically all of the standard access sequences for the partner determination procedure and I haven't been able to do it.
By using standard access sequence 0019 I was able to determine the BP using the relationship, however when opening the generated activity an error ocurrs that states the following message: 'Only one partner function of function category Sold-to-Party is allowed'.
Whats really odd is that if we erase the Sold-to-party field leaving it blank and press enter, the contact person is filled in the same field! It seems like something is missing in the procedure or the way I use the access sequence.
Please help!
Thanks in advance,
Pedro

Pedro
For activities you should not determine SoldToParties, but rather Activity Partners. Please have a look at the standard partner schemes for activities, to see which partner functions are usually used for activities besides the activity partner.
If you have to use soldtoparty partner functions, please take into account that they have special checks enabled.
The system fills in the organization instead of the contact person, esp. if no contact person exists: In R/3 you can have non-reflexive partner functions, but in CRM these are not saved. Instead in partner determination if no target can be found the origined partner itself is used as a result. That is why the organization is put into the result instead of the contact person.
HTH - Kai

Similar Messages

Problem with 'LS' command syntax for generating 'recursive' files list

I'm having trouble getting a recursive (-R) directory listing of the contents of a flash drive --
-- i.e., when I run the 'ls' command with the -R switch (in Terminal), I get either a recursive directory of what appears to be 'all volumes' (i.e., a very large file) or a zero-byte (empty) file.
Terminal also keeps reporting "No such file or directory" but I don't know what it's referring to (it reports it with both the 'zero byte' listing and the 'large file' listing).
Obviously, I'm making some 'syntax error' but I don't know what it is.
Assuming the following . . .
User = MK
Flash drive = NO NAME
. . . what is the correct command syntax to list only the contents of the flash drive (not 'all volumes')?
My last try (it doesn't work) was:
*ls -RTlp /Users/MK/Volumes/NO\ NAME > /Users/MK/Documents/flashdrive.dir*
Thanks.

Re: the original post, I should clarify that what I'm looking for is the syntax that will generate the recursive list of the flash drive's files +without first logging the flash drive+ (NO\ NAME) +as the working folder+.
If I do the latter, I can get the recursive listing easily enough.
What I haven't been able to do is generate the listing without first logging NO\ NAME as the working folder.
Thanks.

Problem with shares on Windows 2003R2 server from a Windows 8.1 PC

I'm having problem with shares on Windows 2003R2 server from a Windows 8.1 PC. It times out when I try to copy a file from my PC to the server and I get an error message saying "There is a problem accessing network drive W:\. Make sure you are
connected to the network and try again."
I have no problem copying files from the server to the PC.
Any ideas?

Hi,
How about your problem now? Have you test other machine also installed Windows 8.1? Did they have this problem?
To diagnose this problem, firstly, please check Windows 2003R2 firewall settings, also can disable firewall temporarilly for test.
Secondly, try to use Network Monitor to capture network communication package for test.
Network Monitor:
http://www.microsoft.com/en-us/download/details.aspx?id=4865
Roger Lu
TechNet Community Support

I had already update mi new factory unlocked iPhone 4S to iOS 5.1.1 and I still having problems with "invalid sim". I'm from Argentina and here we don't have official service. PLEASE HELP ME, WHAT CAN I DO??? In Argentina is too expensive an iPhone 4S.

I had already update mi new factory unlocked iPhone 4S to iOS 5.1.1 and I still having problems with "invalid sim". I'm from Argentina and here we don't have official service. PLEASE HELP ME, WHAT CAN I DO??? In Argentina is too expensive an iPhone 4S. Please I need help to continue believing in Apple. Thanks a lot. If anybody speak spanish better.

Was it purchased from an official Apple Store, not a reseller? Only Apple Stores sell official factory unlocked phones. The others sell hacked to unlock phones, and the unlocking is unstable.
Try these steps, as needed:
1. Reset phone - press both home and on/off buttons for at least 10 seconds until the Apple logo appears.
2. Settings > General > Reset > Reset Network Settings.
3. Replace SIM card (and reset network settings again)
4. Restore Phone in iTunes using a backup
5. Restore in iTunes as new, without using a backup

I have problems with activation, after delete mi Iphone from Icloud.

I have problems with activation, after delete mi Iphone from Icloud.

Hello Sikiz 21,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/TS3424
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Best of luck,
Mario

Problem with Account determination

Hi all.
I have a problem with account determination when I change some data in Tcode VKOA.
For example:
I made changes in VKOA to determine G/L account 0000523201 and it worked it.
But in the account document the account that is displayed is different (0000501000) and I don´t know why.
I checked the Analysis Account Determination in VF03 and the system found the correct account in the access sequence, but I realized that there is a second line with the message G/L account in document 0000501000 . Where do I determine this account, or how Can I fix it ?
Thanks for any help.
Renato

Hi reanto
Check in VKOA all the G/L accounts for all the respective account keys. Also check wheather any provisional G/L account have been maintained or not. for any account key
Also check wheather twice if you have maintained for the same account key different G/L accounts
Regards
Srinath

Had a problem with newest update and the advice from turingtest2 resolved my problem just to say thanks! Had never used this route before so was less painful than thought it would be again thanks.

Had a problem with newest update and the advice from turingtest2 resolved my problem just to say thanks! Had never used this route before so was less painful than thought it would be again thanks.

how can i find out what the fix is that works..please

My daughter's older Ipod Touch is having a problem with images becoming pixilated when taken from an e-mail and placed into her camera roll. ( She wants to put on Instagram ) Any help?

My daughter's older Ipod Touch is having a problem with images becoming pixilated when taken from an e-mail and placed into her camera roll. ( She wants to put on Instagram ) Any help?

I think that may be a consequence of the email provider she is using. Some services (AOL is one example) inspect and modify email attachments, particularly photos, resulting in reduced resolution compared to the email that was sent.
The iPod does not do this. The resolution of the picture in the email she receives will be identical to what is imported.

Problems with the summit that auto generate t:panelTab

Hi,
I have a problem with the summit that auto generate <t:panelTab. When I submit with this button the bean PortfolioPageBean doesn�t recover the property contractListItem. However when I submit with <h:commandButton commandButton action="add", the bean recover information. What is the difference between these two types of submits?. This is my core:
<h:form id="menuTag">
<h:inputHidden id="contractListItem"
 value="#{PortfolioPageBean.contractListItem}" />
<h:commandButton action="add" id="buttonTab" value="Add" />
 <t:panelTabbedPane styleClass="tabbedPane"
 activeTabStyleClass="activeTab" inactiveTabStyleClass="inactiveTab"
 disabledTabStyleClass="disabledTab" activeSubStyleClass="activeSub"
 inactiveSubStyleClass="inactiveSub" tabContentStyleClass="tabContent"
 serverSideTabSwitch="true" id="menuTabs">
 <t:panelTab id="tab1" styleClass="" label="Contract Listing">
 <f:verbatim>
 
 </f:verbatim>
 <f:subview id="subtab1">
 <jsp:include page="contract-list.jsp" />
 </f:subview>
 </t:panelTab>
 <t:panelTab id="tab2" label="General Policy Details" style="align:center">
 <h:outputText
 value="#{PortfolioPageBean.contractListItem}"></h:outputText>
 <f:verbatim>
 
 </f:verbatim>
 <f:subview id="subtab2">
 <jsp:include page="general-policy.jsp" />
 </f:subview>
 </t:panelTab>
 </t:panelTabbedPane>
</h:form>
Thank for your time!!!

Hi,
I have a problem with the summit that auto generate <t:panelTab. When I submit with this button the bean PortfolioPageBean doesn�t recover the property contractListItem. However when I submit with <h:commandButton commandButton action="add", the bean recover information. What is the difference between these two types of submits?. This is my core:
<h:form id="menuTag">
<h:inputHidden id="contractListItem"
 value="#{PortfolioPageBean.contractListItem}" />
<h:commandButton action="add" id="buttonTab" value="Add" />
 <t:panelTabbedPane styleClass="tabbedPane"
 activeTabStyleClass="activeTab" inactiveTabStyleClass="inactiveTab"
 disabledTabStyleClass="disabledTab" activeSubStyleClass="activeSub"
 inactiveSubStyleClass="inactiveSub" tabContentStyleClass="tabContent"
 serverSideTabSwitch="true" id="menuTabs">
 <t:panelTab id="tab1" styleClass="" label="Contract Listing">
 <f:verbatim>
 
 </f:verbatim>
 <f:subview id="subtab1">
 <jsp:include page="contract-list.jsp" />
 </f:subview>
 </t:panelTab>
 <t:panelTab id="tab2" label="General Policy Details" style="align:center">
 <h:outputText
 value="#{PortfolioPageBean.contractListItem}"></h:outputText>
 <f:verbatim>
 
 </f:verbatim>
 <f:subview id="subtab2">
 <jsp:include page="general-policy.jsp" />
 </f:subview>
 </t:panelTab>
 </t:panelTabbedPane>
</h:form>
Thank for your time!!!

The ios8 update is causing innumerable problems with my ipad. The info from my calendar just disappeared, I am typing blind with the keyboard most of the time, and I cannot upload pics or paste to FB. When will this be fixed and what can I do in the

The ios8 update is causing innumerable problems with my ipad. The info from my calendar just disappeared, I am typing blind with the keyboard most of the time, and I cannot upload pics or paste to FB. When will this be fixed and what can I do in the Meantime?

Have you tried yesterday's update to iOS8.0.2?
iOS 8.0.2
This release contains improvements and bug fixes, including:
• Fixes an issue in iOS 8.0.1 that impacted cellular network connectivity and Touch ID on iPhone 6 and iPhone 6 Plus
• Fixes a bug so HealthKit apps can now be made available on the App Store
• Addresses an issue where 3rd party keyboards could become deselected when a user enters their passcode
• Fixes an issue that prevented some apps from accessing photos from the Photo Library
• Improves the reliability of the Reachability feature on iPhone 6 and iPhone 6 Plus
• Fixes an issue that could cause unexpected cellular data usage when receiving SMS/MMS messages
• Better support of Ask To Buy for Family Sharing for In-App Purchases
• Fixes an issue where ringtones were sometimes not restored from iCloud backups
• Fixes a bug that prevented uploading photos and videos from Safari
For information on the security content of this update, please visit this website:
http://support.apple.com/kb/HT1222

TS2755 I am having a problem with getting notified when I receive a call or a text. My phone will not ring or vibrate.

I am having a problem with getting notified when I receive a call or a text.

Hi BigBroMAC,
The first thing I would check is Do Not Disturb mode, as this will cause that behavior:
iOS 6: Using Do Not Disturb
http://support.apple.com/kb/HT5463
If that isn't the issue, this article has slightly different symptoms but the troubleshooting would be the same:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Before you do step 10, however, I recommend resetting all settings to see if that helps. To do that, choose Settings > General > Reset > Reset All Settings.
I hope this helps!
- Ari

No pop-ups with partner determination in Interaction Center Web UI

Hi,
We are working with SAP CRM 7.0 SP06 and have the following problem.
In Interaction Center Web UI, when we create a sales order, the partner determination is triggered. But no pop-ups are shown to choose the right business partner. When we use Web UI for different Role (not Interaction Center), then we will get pop-ups to choose.
So partner determination is alright, but pop-ups are not working for us in Interaction Center.
I know when using SAP GUI Interaction Center, you have to implement SAP Note 487734 for getting the pop-ups. But this note is not relevant for CRM 7.0 and Web UI.
Do you know what the problem is?
Regards,
Emile

Hi Naga,
In customizing go to:
Customer Relationship Management => Interaction Center WebClient => Business Transaction => Define Business Transaction Profiles
Then for your Business Transaction Profile go to 'Business Transaction Dialog Boxes' and mark the 'Allows Dialog Box' field.

Problems with Custom Data Types when converting from TS 1.0 to 3.0.

I am currently involved in the process of converting a test environment from TestStand 1.0, LabVIEW 5.1, and Windows NT to TestStand 3.0, LabVIEW 7.0, and Windows XP. We use a custom Operator Interface developed in LV. Based on the entered Model and Serial number, the appropriate Test Sequence is called. We also use a custom Process Model. The steps in the Test Sequence are either LV code modules or DLLs created in C++. We have LV SubVIs and C++ API functions that allow the developers of the test steps to add data to various Custom Data Types. For example, a developer may set up a test to add a note (Step.Result.Notes[x].String) when the test fails. Step.Result.Notes is a container for an array of strings. The attempt to set a note first attempts to use SetDimensions to redimension the array, then SetValString to set the value. These notes are added to the report. On the old system, everything worked fine. A note could be added to any result. On the new system, if a note is added to say the 5th result, but results 1-4 do not have a note, the test sequence ends and the Operator Interface returns to waiting for data entry (as if no test ever happened). No report is generated. The LabVIEW libraries have been modified to solve this problem by calling SetDimensions to incrementally increase the array size by one, and populating the unused TestStand array elements with an empty array of LabVIEW strings using the SetValString call . In other words, based on the previous example, if the user wants to set a note for the 5th result, the notes for results 1-4 must first be sent an empty array of strings. The report will only display the note for Result 5 (as desired). In addition to this being cumbersome, attempting to implement the same workaround in the C++ API has been unsuccessful because even though the note arrays for unwanted notes (1-4) is initialized with nothing, it is still displayed as a note (empty) on the report. If anybody knows what is wrong and what the solution is, it will be appreciated.

Aaron,
Thanks for your reply. I will attempt to clarify. I am working with a single step. The step calls a DLL. The DLL performs many 'checks' on the UUT (e.g. Model Number Check, Serial Number Check, Calibration Constants Check, etc.). Under the Type Palette - MyTypes.ini, we have a Step Type called TEST_DLL with a container in it called Results. In the Results container are a number of things, but I will only list the important ones:
Notes (Array of Type 'Notes'; Type 'Notes' is a Custom Data Type (container, Type Definition)containing an array of strings called 'String')
-Notes are generally set when on of the checks fails, otherwise no Note is set for the check.
Val (Array of Type 'Val'; Type 'Val' is Custom Data Type (container, Type Definition) containing a Boolean called 'Boolean')
-Val indicates whether the check passed of failed
Pseudocode example:
//Model Number Check
check# = 0;
resultBOOL = ModelNumberCheck();
SetDimensions("Step.Result.Val", 0, "[0]", check#);
SetValBoolean("Step.Result.Val[check#].Boolean", 0, resultBOOL);
if(resultBOOL == FAIL)
Note# = 0;
SetDimensions("Step.Result.Notes", 0, "[0]", check#);
SetDimensions(Step.Result.Notes[check#].String, 0, "[0]", Note#);
SetValString("Step.Result.Notes[check#].String[Note#]", 0, "Model Number Check failed");
Note# = 1;
SetDimensions(Step.Result.Notes[check#].String, 0, "[0]", Note#);
SetValString("Step.Result.Notes[check#].String[Note#]", 0, "Model Number = 1234");
//Serial Number Check
check# = 1;
resultBOOL = SerialNumberCheck();
SetDimensions("Step.Result.Val", 0, "[0]", check#);
SetValBoolean("Step.Result.Val[check#].Boolean", 0, resultBOOL);
if(resultBOOL == FAIL)
Note# = 0;
SetDimensions("Step.Result.Notes", 0, "[0]", check#);
SetDimensions(Step.Result.Notes[check#].String, 0, "[0]", Note#);
SetValString("Step.Result.Notes[check#].String[Note#]", 0, "Serial Number does not match expected");
More Checks
As you can see above, the "Step.Result.Val" array is redimensioned for every check. The "Step.Result.Notes" array is only redimensioned when a note needs to be added for a failing check. If the entire step executes and no check adds a note, the sequence is fine. If every check fails and therefore every check adds a note, the sequence is fine. However, if there are any gaps (e.g. check 0 adds a note, check 1 does not add a note, and check 2 tries to add a note), the sequence will stop. If I add blank notes for every check that would otherwise not have a note, the sequence completes, but the report shows the blank note.
Also, the exact code that is causing these problems runs fine on our old systems (TestStand 1.0). I hope that I clarified the problem and thanks again for the help.

Problem with text determination procedure

here we r finding text determinations procedures for purchase order in spro - img conflagration as follows materialmanagement-purchasing-messages-text for messages-define text for po.by going here i had a view where both header and item text for different po is maintained.
now i want this text to be printed in my purchase order every time with different item selected there should be different item text should be selected.
1. the major problem when inserting into medruck form as insert-text-standard text, here it selecting the text object as TEXT BUT FOR DIFFERENT MATERIALS IT SHOULD SELECT MATERIAL as text object then only i can retrieve the material text's.
if any one can forward a document r help to solve this problem and solution suggestions.
this is a very important requirement.pls forward it as early as possible,
thanx with regards...
hareesh tadepalli

Raj,
Thanks for your suggestion. This would be a possiblity going forward, but we have existing tickets that would still be missing the interaction text. This apparently worked before we upgraded to SP 14, so I don't think there is a problem with our configuration.
I created some new test tickets, and found that the interaction text is still being copied and saved in the ticket log, even after text is added to the ticket. The problem is that the interaction text is not visible from IC Web. It is visible when looking at the ticket in the SAP GUI (transaction CRMD_ORDER).
For example, here is the contents of the Log text as seen in SAP GUI (I use "TICKET" or "INTERACTION" in the text to indicate where the text originated):
General Note
06/03/2009          11:14:36            M305755
TICKET - general note
General Note
06/03/2009          11:13:59            M305755
INTERACTION - general note
Technical Problem
06/03/2009          11:13:59            M305755
INTERACTION - technical problem
Here is the contents of the Log text as seen in IC Web:
General Note
06/03/2009          11:14:36            M305755
TICKET - general note
Martin

Wireless printing problem with hp officejet 100 mobile printer from win 7 dell laptop

My hp officejet 100 mobile printer was working fine with my dell XPS 15 in bluetooth wirelessly until my laptop crashed. Now I can not get it to print internet info except with hard wire connection. Page loads half way and then stops. Must shut down laptop and shut off printer or hard wire and shut off bluetooth. down loaded lastest drivers to no avail. printer will print from cell phone and win 8 computer via bluetooth but not win 7 laptop.

Sorry you are having problems with printing from the internet. I have a few more questions to ask you before I can be of much assistance.
What web-browser are you using?
Do you have any problems printing from Word or other non-internet documents?
What did you do to fix your computer (system restore, clean install of the OS, etc)?
Have you tried an alternate web-browser?
Make sure to install all of your Microsoft updates to see if that helps. Otherwise, answer those questions for me please and I will be happy to help.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Problems with Partner determination in activities generated from call list

Similar Messages

Maybe you are looking for