Problems with Password and Printer Installation
I recently have been trying to install a deskjet and when I put in the installation disc and it asks me my password, I type it in and get the response
The software to be installed requires Administrator or higher level access priveleges.
I a) know my password is correct b) I was the only acount (therefore I had to be the administrator) until I went through the steps to make another administrator account so I could be sure that I was using the right password and acount. I JUST DON'T KNOW WHAT TO DO!!!
I also know that when I purposely type in the wrong password, it tells me it is the wrong password, not the message I receive when I type in the right one.
I'd appreciate any help
Mac OS X (10.3.9)
YOU ARE MY HERO!! it worked and problem solved. Thank you very much.
kikis931
Similar Messages
-
Problem with exporting and printing from pages to PDF
I have a problem with my Pages
My font will not be embeded in my pdf files.
I have saved as a ps file and in to the destiller and my fonts are missing.
I need to send my file to the print shop but they will not accept my file and i now understand why.
fonts are missing...
Is there a workaround.
I have no problem in Indesign or quark but pages.....
I need help
thanks a zillionThe font is coming from a notation software Sibelius 4 and is namned opus
Hmmm ... Sibelius is a music notation software and notations are marked up in MusicXML. Presumably the font file is an SFNT with TrueType splines, but it is probably not installed in OS X system folders - rather in an internal Sibelius application font folder. So presumably you do not see the font in FontBook and OS X font auditing does not apply to the font.
Sibelius exports EPS files, right? If memory serves, an EPS is still legal even if the font resource is not embedded. And in any case, we know from the behaviour that the font resource is not embedded for some reason. So how do you get Sibelius to put the font resource inside the graphic ... normally there is a button in the EPS export procedure that gives you the option to Embed All Fonts.
You do not seem to get this button, though. Or why else would you not have checked it already and the problem would have gone away already.
The next point in troubleshooting this is that you are not following the path that would let OS X detect that an external font resource is not embedded.
I go from pages-print-printer- acrobat Pro 8-save as Pdf-x
What you are doing here is telling Pages to tell OS X to generate a PostScript program within which is nested your Encapsulated PostScript program with the call to an unresolved external font resource.
So why does Acrobat Pro not detect the unresolved external font resource? Hmm ... did you try the Preflight option in Acrobat 8 Pro? It should provide information on unresolved embeddings.
I have also tried pages-print-printer- acrobat Pro 8 and save pdf as postscript and put the postscript file in destiller 8 pro with defalt setting high quality print
The whole problem with EPS and PS is that this sort of situation is possible in the first place (plus, what is worse, the PS program can include custom additions to the graphics model that then fail in the PS interpreter whence Apple GX normalizing, Adobe Distiller normalizing, and Apple Quartz normalizing). You want to get as far away from EPS and PS as possible, believe me.
So, you have not done what I posted that you should do in the first place. If I were you, I would first get rid of the problem that the EPS is making a call to an external font and then get rid of the problem that the PostScript is preserving the external call.
To get rid of the problem that the EPS is preserving an external call, simply open the EPS in Apple Preview which includes a NORMALIZER for EPS/PS, and then save out the graphic as PDF. Alternatively, if you don't trust Quartz for some reason, set up a hotfolder for Distiller, make sure the option to embed all fonts is enabled, and convert the EPS to PDF.
Now replace your EPS in Pages with PDF in Pages, and don't save PostScript to disk but save PDF to disk through the proper procedure which is File > Print > PDF > Save as PDF/X [for your custom configuration of the PDF/X-3 filter considering that no sane person in North Europe prints lowend US SWOP, we use ISO].
If you begin by telling OS X that you want PDF within which fonts are supposed to be embedded ALWAYS, then you have started the right way. Otherwise, you have not told the operating system what you want to do, and this then leads you into places where you are unlikely to have the expertise to troubleshoot problems.
So, forget placing EPS in the first place, place PDF. And forget saving PostScript to disk, save PDF to disk. If that does not sort your problem, here is the dirty solution for professional prepress.
Adobe Photoshop has an EPS rasterizer that has wide tolerances for poor PostScript programming (so does Adobe Illustrator 6 and higher by the way).
Therefore, if an EPS is posing problems, one workaround is to rasterize the EPS at high resolution in Photoshop and place that high resolution PDF in your layout.
Take care that you rasterize as 1 bit at the required resolution of the print provider, probably 2450 dpi. When you save the 1 bit as PDF, Photoshop automatically compresses to a very, very small file (don't be surprised if 15Mb compresses to something like 0.5Mb).
Rasterizing in Photoshop should not be necessary if you simply start by telling the operating system what it is you are trying to do. Then the operating system should be able to take the right decisions for you, and tell if you if finds problems it cannot resolve without turning to you.
Good luck,
Henrik
would-be technical writer -
Problem with file and printer sharing
I just installed a Linksys WRT54G to replace a D-Link wireless router and cannot reestablish my file and printer sharing since replacing the router. I had file and printer sharing working fine before installing the WRT54G. All of the computers are running either XP Pro or 2000 Pro. I have two printers attached to one of my computers that I was previously sharing with all of the other computers on our home network. One is attached via a parallel port, the other via a USB port.
Here's what I've tried so far without success.
1. The IP of the WRT54G is 192.168.1.1, and the IP's it assigns to my LAN computers begin 192.168.1.XXX. The old IP of the D-Link was 192.168.0.1 and its LAN IPs were 192.168.0.XXX, so I've gone into my firewall and changed the settings for the range of trusted computers to correspond to the WRT54G's IP addresses.
2. I've tried uninstalling the printers and reinstalling them, including reinitializing printer sharing.
3. When I try to use the Windows "Add printer" wizard to add a networked printer, it can see the computer that has the printers attached, but it does not see the printers.
4. I haven't fooled around with the file sharing settings, but they've all be lost too, so I suspect there is a common problem for both printer and file sharing.
Any suggestions would be most welcome. I don't know what would be different about the WRT54G that would cause this problem.Try this to Enable File and Printer Sharing...Turn Off the Router Firewall...Make sure the Windows Firewall is also Off...
-
Problems with capturing and printing-to-tape using FCP4
Having trouble logging footage and printing to video using FCP4.
1) When we log-in footage (capture) it constantly stops and says, "dropped frames". This usually happens after 10-15 minutes of logging-in footage. Why is this happening??
2) When we Print-To-Tape, it will suddenly stop! Sometimes it will continue Printing-To-Tape, but without audio!
Is this a common problem? Should we re-install FCP4?
We've done all the software updates, but we're still experiencing these problems. We've also cleared up our computer by deleting old FCP4 projects.
We have a G4 with three internal Hard Drives with approx 180GB each. We're using the Sony DSR-11 as our Mini-DV deck.
Help!!!!We don't have Virex or Norton software in the machine. We have Disk Warrior which was helpful in the past with other problems. Should I run another check using Disk Warrior?
We only have one machine which has three internal drives. We've experienced the same problems using each of the drives.
We do have some video stored in the system drive, but normally we don't use that drive. The system drive currently has 70GB availble, as do each of the other internal drives.
We have updated our FCP to 4.5, but should we trying re-installing it? -
Problems with layout and printing tables
Hello,
my first ADOBE-Form "projekt" makes more problems than expected, especially with the layout.
Layout Problem 1:
I want to print the data of a table (thats my only parameter in the interface and the table itself is deep structures with other tables). So I have bound the "standard" subform (the one ADOBE inserts automatically" to the table and selected that the subform is repeated after every record.
Anyhow ADOBE processes only the first record of this table.
Maybe the reason is, that I need to display the data of one record on two pages. So I created two pages each with the "standard" subform and bounded both to the table.
What am I doing wrong? Do i have to do the page split another way?
Layout Problem 2:
I have a text field with multiple lines allowed. But it overwrites the content of the object, that comes below.
Its the same with my other subforms for table data.
How can I tell the system, that an object needs to be pushed downside on the page, if the context above needs more space?
Thanks in advance for your answers!
Regards,
FrankYeah, you say it
subforms and they "flowing" etc. properties are killing me, but after some hours I think I got the concept.
The form looks quite well, everything is pushed downwards if an item above gets expanded.
But one problem remains: this form only prints the very first record of my table.
I have no problems with the tables nested inside the main table. They work perfectly and everything is fine there!
But I cant tell the form to print my other records...
I somehow played around and made it work, but then the next record was not on the next page but directly after the subform created by the context area (if this terminology is correct).
I played around even further and created a paging with reference to the context area, but then the first page looked quite odd (page 2, 3, 4... looks perfect).
I tried to fix also this and then I somehow messed up my form and could not undo my changes (it was only a "to play with" copy...)
Just to explain it again:
I have one table (lets call it the "main table" because its the import parameter of the interface) and inside this table are other nested tables.
I want to print one record of the "main table" across 2 pages and after that the next record of the "main table" should be printed beginning at the 3rd page.
As I said, the two pages look wonderful (even though I have not yet covered the issue of what should happen, two pages are not enough for one record of the "main table"). but as soon as I try to display the next records of the "main table" as well, i am stucked in unpredictable layout problems.
I cant believe that I try anything extraordinary. Lets hope that I can solve this with your very appreciated help.
Thanks in advance Otto!!!
And kind regards, Frank -
I have 2 email addresses (1 mac.and 1 blueyonder.) each with separate identities and passwords. I am forever getting asked to verify identity and/or passwords and having these refused and me then having to set up new ones. Can I combine my email addresses to a single Apple Identity and Password? If yes then How?
Any help much appreciated as this is driving me crazy!Depending on what you're asking...
There is no means to merge Apple IDs. You can change the mail address assocaited with your Apple ID, so you might switch to using and purchasing from one email address, and using the second as a backup. (There's no means to merge the purchases, and related baggage.)
While I'm guessing this was about Apple IDs, for completeness... Combining the mail messages involving multiple email addresses is separate from the Apple ID; that is usually done with some combination of notifying the senders or with the forwarding of messages from one mail server to the preferred server. Or running multiple mail accounts in parallel, depending on what you are up to. -
Anybody has any problems with installing and printing with canon lbp6650dn?
hi,
i bought a new i-sensys lbp6650dn and i am trying to make it work with my macbook 10.5.8. the installation cd that comes with it does not work with mac. i downloaded the latest drivers from canon's website, and could add the printer to my list.
computer's connected to the printer with USB. both the computer and the printer show no error, but whenever i try to print a document it starts printing jumbld letters and numbers that look like programme codes. moreover, it prints around 20 pages for a 1-page document. does anybody know what the problem might be? i am not sure whether there is something wrong with the computer's settings or the printer's. it's the first time installing a printer is giving me such a hard time. any help would be much appreciated.
thanks!Try reseating your memory. Sometimes this occurs when the RAM is not seated all the way in the slot.
You could also boot from your 1st install disk while holding down the D key. Then run the diagnostics on your MacBook.
Message was edited by: First Magus -
Problems with CS3 and CS4 installations
Hello, I have a problem when I install any product CS3 or CS4. When the program starts establishing, a window appears in the one that says " verifying the profile of the system " but the window being blocked always to 90 %. Does someone know the solution?
Thank you.This is a fairly common problem. Has to do with orphaned files on your system which have to be cleaned first up to make it work. Use the search above and type in installation fails at 90%.
Here is one link. http://forums.adobe.com/click.jspa?searchID=309763&objectType=2&objectID=883869 -
How to sign in? (problem with username and/or password)
I created an account long ago for the Support Communities with an Apple ID: xxx.mac.com.
I created an account not so long ago for iTunes with an Apple ID: xxx.gmail.com.
Where they suppost to be the same? Wasn't sure. In any event, I've been using them both without a hitch. Then I realized that I could have a password recovery problem with my Support Communities account because I haven't had the xxx.mac.com email address for several years now.
Problem: When I use my older Apple ID for Support Communities, it will not allow me to change my email to my current xxx.gmail.com address. I suspect it recognizes the address is already being used with me newer Apple ID for iTunes. My solution was to simply ditch the older ID and try signing in with my newer ID. Unfortunately with that route, I get:
"We're sorry. Your account could not be created due to system issues. Please contact Apple Support Communities with the information below to create your account." [Which I've done, but no response.]
Questions: Are the ID support to be the same or different? Either way, it doesn't really matter to me, but I either need to update my address for the older ID or be able to use my newer ID in Support Communities. Because of this, I'm unable to use any type of email notification and I'm afraid I could have a problem with password recovery if I were in that position.
Thanks for any comments.Problem solved and completely my error.
My login with the old Apple Discussions was [email protected] At some point, with the new Apple Support Communities, some time ago, I was prombed to create a new account and I did so. My username was simply "xxx" without the "@mac.com".
So that was the problem. My old [email protected] still had my old address. I kept logging in with this ID and kept trying to update my address. Where I thought it was recognizing that this address was already used with my iTunes account, it was because it was used with my newer Support Communities ID (xxx) that I didn't even remember I had created.
Turned out it was something so simple. (I hate when that happens.) I had to play my "idiot card".
Thanks to Apple support for the direct email correspondence that finally got me on the right track. -
Mountain Lion fails to install saying it cannot create the recovery; I had a similar problem with Lion and the Apple Store that helped me resolve it gave me an installable version of Mountain Lion on a flash drive for my inconvenience....is there some trick I am missing or do I need to make an appointment with a genius...
I have the MacIntosh volume and the Boot Camp partition only. I know that when I installed Lion, I had to go through a whole back-up and recovery of Windows and then re-format the drive.
The tech at the Apple Store had a previous life as a MSCE and was very helpful. I believe he even said that I should not have htis problem with Mountain Lion which is why they gave me the flash with it onboard. I was in the process of starting a new job when I went to Lion, so I have waited to do this next and probably last upgrade to this old MBP since I doubt Apple will support this MBP in Maverick.
I do not have another installation, so that is not an option. I will try to create an external, I have plenty of hard drives around and see if I can get it done that way. It might take me a week or two to get back to it, but I will comment back upon completion of that effort. Thanks for your help....Dave Iverson -
Extreme Music - Problems with Driver and Installation
Hi guys,
?After the my computer has given up it's life on the last friday, I bought a new one and wanted yesterday to install everything like OS, driver and so on.
I started the install of the driver(which is the version from the creative website , released in july 2009) for my soundcard, the X-FI Extreme Music and when the information was given, that the Windows drivers will be updated and it will take some minutes, something happend:
At my first try a bluescreen appered. You can imagine, that I was shocked to see a bluescreen on my new pc after an hour.
I run CCleaner to remove some rests of the "maybe installed" driver and started it again. There was no bluescreen, but the mouse freezes and the setup does nothing anymore. I can close it with may keyboard, but the driver wasn't installed.
After a new clean up with CCleaner I tried it again. I put out my cable of the mouse , so maybe this was the problem(ofc, WHY is there a problem with USB and PCI Cards ?). The installations works, no hang up or freezes. After a restart nothing happend. No sound. I looked at the hardware manager(do not know, whether it is the correct word, I'm german and have a german windows ) of windows and at audio, video and gamecontroller, there is a warning of not working driver.
I remember, that on my old system the driver was titled something like
X-FI Audio[800] or something like that.
But here it was named with?
X-FI Processor WDM
I thing the system is installing the wrong driver.
I looked at some forums , find the hint to change the PCI slot. I did it, but nothing changed.
So, here are some information of my system configuration, maybe someone can help.
Old system(where the soundcard works fine with no problems):
- Athlon X2 4200+(socket was the "old" 939)
- Asus A8N-E
- DDR 400 RAM, 2GB
- Windows XP Professional(32 Bit) with SP3
New System:
- Phenom II X4 80(quadcore)
- Gigabyte MA790XT-UD4P
- DDR3 333 RAM , 4GB
- same OS as used in the old configuration
Ofc all chipdriver were installed and seems to work fine.
The onboard soundchip is disabled too.
Hope for help ^^
Mel
Message Edited by Meldanor on 08--2009 2:20 [email protected]Hi guys,
I'm very sry for the wasted bytes and bits in this forum, but my problem was solved some minuetes after this post >.< .
I tried once again to install the driver and everything is working ... until yet, but only the future will show me, whether it will work or not ^^
What I've done? Just a restart after the post. -
Problem with installing and running some applications or drivers
When installing and installing some items, towards the end of the installation I get this message:
/System/Library/Extensions/comcy_driver_USBDevice.kext
*was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update*
The end result is that some things do not seem to work properly, such as my HP printer. Would anybody have any ideas on how to fix this problem?Thank you for your response. Originally, I had a problem with Airport and ended up reinstalling Snow Leopard. Since then, when downloading upgrades etc, such as HP printer drivers, iTunes etc., towards the end of the download when its running the script, I get this message: /System/Library/Extensions/comcy_driver_USBDevice.kext
+was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update+
Sometimes, the download hangs and is unable to complete. The main problem I've encountered so far with an application is when I use the printer to scan an image via Preview, it's blank: there's nothing there. -
[Problem with U310 and W8] Deinstalled my WuDFRd-Drivers
Hey,
i just set up my new u310 with windows 8 and it worked fine. Then i realised, that on startup it takes about 4-10 minutes to search for wifi and i began struggeling around with things... deinstalled some drivers, reinstalled them again, just to see which drivers collide because the wifi service didnt start on startup.
Then i saw a message on my system which was timed around the startup time and it said "The driver \Driver\WUDFRd failed to load for the device ROOT\LENOVOVHID\0000.". I looked it up on the internet and i saw that few people had the same problems with the long startup and similar things... so i just deinstalled the "Windows Driver Package - Lenovo WuDFRd Drivers" to reinstall a newer version or something like that.... but problem is, Where can i find this Driver package? I just cant find it. Will the startup problem be solved with a new installation of these drivers? Please help meThank you for your response. Originally, I had a problem with Airport and ended up reinstalling Snow Leopard. Since then, when downloading upgrades etc, such as HP printer drivers, iTunes etc., towards the end of the download when its running the script, I get this message: /System/Library/Extensions/comcy_driver_USBDevice.kext
+was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update+
Sometimes, the download hangs and is unable to complete. The main problem I've encountered so far with an application is when I use the printer to scan an image via Preview, it's blank: there's nothing there. -
My wife has been having problems with Safari, and many third party software and malware programs infecting her Mac Book Pro. I have tried to reset Safari but it keeps coming back, taking over Safari, changing defaults, start pages, and search engines, Etc.
Is it safe to use programs like MacKeeper, who keeps send my wife's computer message and alerts, or should I just wipe the drive and start over?
SkipI am having lot's of lag time with Safari, etc..
I'll type in a website.. and it will take 15-20 seconds to start..
Start time: 17:51:37 12/02/14
Model Identifier: MacBookPro11,3
System Version: OS X 10.10.1 (14B25)
Kernel Version: Darwin 14.0.0
Time since boot: 14 days 3:02
USB
My Passport 07B8 (Western Digital Technologies, Inc.)
Diagnostic reports
2014-11-13 QuickLookSatellite crash x2
2014-11-21 com.apple.WebKit.Plugin.64 crash
Log
Nov 30 21:32:39 PM notification timeout (pid 345, Adobe CEF Helper)
Nov 30 21:32:39 PM notification timeout (pid 99018, CEPHtmlEngine)
Nov 30 21:32:39 PM notification timeout (pid 99019, CEPHtmlEngine He)
Dec 1 09:09:03 [[0xffffff802bfa4000] OpCode 0x0C01 (Set Event Mask) from: kernel_task (0) Synchronous status: 0x00 (kIOReturnSuccess) state: 2 (BUSY) timeout: 5000] Bluetooth warning: An HCI Req timeout occurred.
Dec 1 09:52:03 PM notification timeout (pid 266, Creative Cloud)
Dec 1 09:52:03 PM notification timeout (pid 346, Adobe CEF Helper)
Dec 1 09:52:03 PM notification timeout (pid 345, Adobe CEF Helper)
Dec 1 10:04:37 process WindowServer[114] caught causing excessive wakeups. Observed wakeups rate (per sec): 170; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 12755007
Dec 1 10:31:08 ALF: ifnet_get_address_list_family error 12
Dec 1 10:59:17 process Meeting Center[2921] caught causing excessive wakeups. Observed wakeups rate (per sec): 647; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45104
Dec 1 12:24:35 process com.apple.WebKit[4567] caught causing excessive wakeups. Observed wakeups rate (per sec): 297; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 76962
Dec 1 14:31:01 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 397; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 53188
Dec 1 14:43:52 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 224; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 150084
Dec 1 14:47:34 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 332; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 222103
Dec 1 15:03:29 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 214; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 370572
Dec 1 16:38:03 SIOCPROTODETACH_IN6: utun2 error=6
Dec 1 16:38:08 SIOCPROTODETACH_IN6: utun2 error=6
Dec 1 20:08:30 jnl: disk3s2: replay_journal: from: 112328704 to: 113115136 (joffset 0x3a38000)
Dec 1 20:08:30 jnl: disk3s2: journal replay done.
Dec 1 20:27:11 com.adobe.acc.AdobeCreativeCloud.75292.UUID: Service exited with abnormal code: 5
Dec 2 08:23:00 process com.apple.WebKit[11891] caught causing excessive wakeups. Observed wakeups rate (per sec): 161; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 527508
Dec 2 09:29:37 firefox (map: 0xffffff80317c5960) triggered DYLD shared region unnest for map: 0xffffff80317c5960, region 0x7fff9ae00000->0x7fff9b000000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Dec 2 10:04:39 SIOCPROTODETACH_IN6: utun2 error=6
Dec 2 10:04:44 SIOCPROTODETACH_IN6: utun2 error=6
Dec 2 16:42:24 process com.apple.WebKit[26151] caught causing excessive wakeups. Observed wakeups rate (per sec): 153; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45002
Swap (MiB): 41556
Activity
Net: 210 in, 20 out (KiB/s)
Memory: kernel_task (UID 0) is using 1632 MB
kexts
com.cisco.kext.acsock (1.1.0)
com.wdc.driver.USB.64.10.9 (1.0.1)
Daemons
com.cisco.anyconnect.vpnagentd
com.oracle.java.JavaUpdateHelper
com.apple.installer.osmessagetracing
com.microsoft.office.licensing.helper
com.google.keystone.daemon
com.wdc.WDSmartWareService
com.oracle.java.Helper-Tool
com.adobe.fpsaud
com.wdc.SmartwareDriveService
Agents
com.adobe.AdobeCreativeCloud
com.zimbra.desktop
com.citrix.ServiceRecords
com.google.keystone.system.agent
com.apple.photostream-agent
com.genieo.completer.download
com.genieo.completer.update
com.cisco.anyconnect.gui
com.citrix.ReceiverHelper
com.citrix.AuthManager_Mac
com.citrix.FMDAgent.14800.UUID
com.oracle.java.Java-Updater
com.fiplab.MailTabProHelper
com.adobe.PDApp.AAMUpdatesNotifier.74724.UUID
com.citrixonline.GoToMeeting.G2MUpdate
com.apple.AirPortBaseStationAgent
com.microsoft.SyncServicesAgent
Startup items
/System/Library/StartupItems/ciscod/ciscod
/System/Library/StartupItems/ciscod/StartupParameters.plist
Bundles
/System/Library/Extensions/hp_fax_io.kext
- com.hp.kext.hp-fax-io
/System/Library/Extensions/hp_Inkjet1_io_enabler.kext
- com.hp.print.hpio.Inkjet1.kext
/System/Library/Extensions/hp_Inkjet4_io_enabler.kext
- com.hp.print.hpio.Inkjet4.kext
/System/Library/Extensions/hp_Inkjet8_io_enabler.kext
- com.hp.print.hpio.inkjet8.kext
/System/Library/Extensions/JMicronATA.kext
- com.jmicron.JMicronATA
/System/Library/Extensions/WD1394_64_109HPDriver.kext
- com.wdc.driver.1394.64.10.9
/System/Library/Extensions/WDUSB_64_109HPDriver.kext
- com.wdc.driver.USB.64.10.9
/Library/Extensions/hp_io_printerclassdriver_enabler.kext
- com.hp.hpio.hp-io-printerclassdriver-enabler
/Library/Internet Plug-Ins/AdobeAAMDetect.plugin
- com.AdobeAAMDetectLib.AdobeAAMDetect
/Library/Internet Plug-Ins/CitrixICAClientPlugIn.plugin
- com.citrix.citrixicaclientplugIn
/Library/Internet Plug-Ins/Flash Player.plugin
- N/A
/Library/Internet Plug-Ins/googletalkbrowserplugin.plugin
- com.google.googletalkbrowserplugin
/Library/Internet Plug-Ins/JavaAppletPlugin.plugin
- com.oracle.java.JavaAppletPlugin
/Library/Internet Plug-Ins/npg.plugin
- npg.graphon.com
/Library/Internet Plug-Ins/o1dbrowserplugin.plugin
- com.google.o1dbrowserplugin
/Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin
- com.microsoft.sharepoint.browserplugin
/Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin
- com.microsoft.sharepoint.webkitplugin
/Library/Internet Plug-Ins/Silverlight.plugin
- com.microsoft.SilverlightPlugin
/Library/Internet Plug-Ins/SlingPlayer.plugin
- com.slingmedia.slingplayer.plugin.nspapi
/Library/PreferencePanes/Flash Player.prefPane
- com.adobe.flashplayerpreferences
/Library/PreferencePanes/FMDSysPrefPane.prefPane
- Citrix.FMDSysPrefPane
/Library/PreferencePanes/JavaControlPanel.prefPane
- com.oracle.java.JavaControlPanel
/Library/PreferencePanes/WDQuickViewPrefsPane.prefPane
- com.westerndigital.quickview.prefpanel
/Library/PreferencePanes/Zimbra.prefPane
- com.zimbra.prefpanel
/Library/ScriptingAdditions/Adobe Unit Types.osax
- N/A
Library/Address Book Plug-Ins/SkypeABDialer.bundle
- com.skype.skypeabdialer
Library/Address Book Plug-Ins/SkypeABSMS.bundle
- com.skype.skypeabsms
Library/Internet Plug-Ins/CitrixOnlineWebDeploymentPlugin.plugin
- com.citrixonline.mac.WebDeploymentPlugin
Library/Internet Plug-Ins/Google Earth Web Plug-in.plugin
- com.Google.GoogleEarthPlugin.plugin
Library/Internet Plug-Ins/WebEx.plugin
- com.webex.WebEx
Library/Internet Plug-Ins/WebEx.plugin/Contents/Resources
- com.webex.WebEx
Library/Internet Plug-Ins/WebEx64.plugin
- com.cisco_webex.plugin.gpc64
dylibs
/usr/lib/libaudioc.dylib
/usr/lib/libclipc.dylib
/usr/lib/libcs.dylib
/usr/lib/libdc.dylib
/usr/lib/libfilec.dylib
/usr/lib/libMonoPosixHelper.dylib
/usr/lib/libpbr.dylib
/usr/lib/libprintc.dylib
/usr/lib/libsc.dylib
/usr/lib/libSFFileMonitor.32.dylib
/usr/lib/libSFIPC.32.dylib
/usr/lib/libSFIPC.I.dylib
/usr/lib/libSFsqlite3.7.4.dylib
/usr/lib/libSFSyncEngine.I.dylib
/usr/lib/libupc.dylib
App extensions
it.bloop.airmail.beta10.Airmail-Today-Beta
it.bloop.airmail.beta10.Airmail-Composer-Beta
com.wunderkinder.wunderlistdesktop.sharingextension
com.wunderkinder.wunderlistdesktop.todayextension
com.readitlater.PocketMac.AddToPocketShareExtension
com.stylemac.instadesk.Photodesk-Feed
it.bloop.airmail.beta10.Airmail-Share-Beta
Apps
/Applications/Uninstall IM Completer.app
Contents of /Library/LaunchAgents/com.cisco.anyconnect.gui.plist (checksum 1087717482)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<dict>
<key>PathState</key>
<dict>
<key>/opt/cisco/anyconnect/gui_keepalive</key>
<true/>
</dict>
</dict>
<key>Label</key>
<string>com.cisco.anyconnect.gui</string>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>ProgramArguments</key>
<array>
<string>open</string>
<string>--wait-apps</string>
<string>/Applications/Cisco/Cisco AnyConnect Secure Mobility Client.app</string>
</array>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.citrix.AuthManager_Mac.plist (checksum 1591517921)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>ServiceIPC</key>
<true/>
<key>MachServices</key>
<dict>
<key>com.citrix.AuthManager_Mac</key>
<true/>
</dict>
<key>Label</key>
<string>com.citrix.AuthManager_Mac</string>
<key>WaitForDebugger</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/usr/local/libexec/AuthManager_Mac.app/Contents/MacOS/AuthManager_Mac</ string>
</array>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>Disabled</key>
<false/>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.citrix.ReceiverHelper.plist (checksum 676087606)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.citrix.ReceiverHelper</string>
<key>RunAtLoad</key>
<true/>
<key>KeepAlive</key>
<dict>
<key>SuccessfulExit</key>
<false/>
</dict>
<key>WaitForDebugger</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/usr/local/libexec/ReceiverHelper.app/Contents/MacOS/ReceiverHelper</st ring>
</array>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>Disabled</key>
<false/>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.citrix.ServiceRecords.plist (checksum 1445213025)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>ServiceIPC</key>
<true/>
<key>MachServices</key>
<dict>
<key>com.citrix.Beacons</key>
<true/>
<key>com.citrix.ServiceRecords</key>
<true/>
</dict>
<key>Label</key>
<string>com.citrix.ServiceRecords</string>
<key>RunAtLoad</key>
<true/>
<key>KeepAlive</key>
<true/>
<key>WaitForDebugger</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/usr/local/libexec/ServiceRecords.app/Contents/MacOS/ServiceRecords</st ring>
</array>
...and 8 more line(s)
Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist (checksum 3453356730)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.oracle.java.Java-Updater</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>
<string>-bgcheck</string>
</array>
<key>StandardErrorPath</key>
<string>/dev/null</string>
<key>StandardOutPath</key>
<string>/dev/null</string>
<key>StartCalendarInterval</key>
<dict>
<key>Hour</key>
<integer>9</integer>
<key>Minute</key>
<integer>57</integer>
<key>Weekday</key>
<integer>3</integer>
</dict>
</dict>
...and 1 more line(s)
Contents of /Library/LaunchDaemons/com.cisco.anyconnect.vpnagentd.plist (checksum 2630047092)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC -//Apple Computer//DTD PLIST 1.0//EN
http://www.apple.com/DTDs/PropertyList-1.0.dtd >
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.cisco.anyconnect.vpnagentd</string>
<key>ProgramArguments</key>
<array>
<string>/opt/cisco/anyconnect/bin/vpnagentd</string>
<string>-execv_instance</string>
</array>
<key>KeepAlive</key>
<true/>
<key>RunAtLoad</key>
<true/>
<key>AbandonProcessGroup</key>
<true/>
<key>EnableTransactions</key>
<false/>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.wdc.SmartwareDriveService.plist (checksum 2733252498)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.wdc.SmartwareDriveService</string>
<key>Program</key>
<string>/Library/Application Support/WD SmartWare Services/SmartwareDriveService</string>
<key>RunAtLoad</key>
<true/>
<key>StandardErrorPath</key>
<string>/dev/null</string>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.wdc.WDSmartWareService.plist (checksum 1153517838)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.wdc.WDSmartWareService</string>
<!-- <key>Program</key>
<string>/Library/Application Support/WD SmartWare Services/SmartwareServerApp.app/Contents/MacOS/SmartwareServiceApp</string> -->
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/WD SmartWare Services/SmartwareServiceApp.app/Contents/MacOS/SmartwareServiceApp</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StandardErrorPath</key>
<string>/dev/null</string>
</dict>
</plist>
Contents of Library/LaunchAgents/com.genieo.completer.download.plist (checksum 1894818845)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.genieo.completer.download</string>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Library/Application Support/com.genieoinnovation.Installer/Completer.app/Contents/MacOS/Installer</ string>
<string>-trigger</string>
<string>download</string>
<string>-isDev</string>
<string>0</string>
<string>-installVersion</string>
<string>15886</string>
<string>-firstAppId</string>
<string>19340001</string>
</array>
<key>WatchPaths</key>
<array>
<string>/Users/USER/Downloads</string>
</array>
</dict>
</plist>
Contents of Library/LaunchAgents/com.genieo.completer.update.plist (checksum 2339121592)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.genieo.completer.update</string>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Library/Application Support/com.genieoinnovation.Installer/Completer.app/Contents/MacOS/Installer</ string>
<string>-trigger</string>
<string>update</string>
<string>-isDev</string>
<string>0</string>
<string>-installVersion</string>
<string>15886</string>
<string>-firstAppId</string>
<string>19340001</string>
</array>
<key>StartInterval</key>
<integer>86400</integer>
</dict>
</plist>
Contents of Library/LaunchAgents/com.microsoft.LaunchAgent.SyncServicesAgent.plist (checksum 3051698494)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<false/>
<key>Label</key>
<string>com.microsoft.SyncServicesAgent</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Applications/Microsoft Office 2011/Office/SyncServicesAgent.app/Contents/MacOS/SyncServicesAgent</string>
</array>
</dict>
</plist>
Contents of Library/LaunchAgents/com.zimbra.desktop.plist (checksum 3676173668)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.zimbra.desktop</string>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Library/Zimbra Desktop/bin/zdesktop</string>
<string>start</string>
<string>-w</string>
</array>
-
Problem with the MVMapView.print(printMapDiv,) function.
Hello,
I have a problem with the MVMapView.print(printMapDiv,) function.
My FOIs are displayed correct on the screen but on the printed letter
the stroke(border) color and the labels of a circle are not displayed.
the fois have a custom style:
var xmlDef = '<svg width="1in" height="1in">'+
'<g class="marker" '+
'style="width:40;height:40;stroke:0xff0000;fill:0x00ff00;stroke-width:1.5">'+
'<circle r="20"/>'+
'</g>'+
'</svg>';
markerStyle = new MVXMLStyle("my_vector_icon_" + i + '_' + j, xmlDef)
and are created like this:
v_result = new MVFOI(p_geofeature.foiId, p_geofeature.foiGeomertyObject, markerStyle, null, 30, 30);
v_result.setHTMLElement('1',0,0);
Browser: I can see the map with a green circle, a red border and '1' as a label on
top of the Circle.
Printed Letter: I see the map with the green circle but no red border Color and no label.
The implmentation of the printing function uses the same techique like the "Oracle Maps Tutorial"
It is a javascript function called through a href link:
function mapPrint()
var a=document.getElementById("printmap");
global_gdi.mapviewer.mapview.print(a);
Version is Ver11_1_1_5_B110527
Does anbody know how to print the map properly including the contents of the
MVFOI class set trough setHTMLElement function?
Greetings
AndreThanks for your reply but it is not working and i can prove that.
I have a small example based on the mapviewer print tutorial. To run it you need a
mapviewer installation and copy the text into a html file. In the browser you can see
a green point with a red border and red label text on a map.
If you use the print button everything except the label text will be printed.
I think this is a mapviewer css-api bug.
<html>
<head>
<META http-equiv="Content-Type" content="text/html; charset=UTF-8">
<style type="text/css">
@media screen
.noscreen {display: none;}
@media print
.noprint{display: none;}
</style>
<script language="Javascript" src="/mapviewer/fsmc/jslib/oraclemaps.js"></script>
<script language=javascript>
var mapview;
var baseURL = "http://"+document.location.host+"/mapviewer";
function showMap()
mapview = new MVMapView(document.getElementById("map"), baseURL);
mapview.addMapTileLayer(new MVMapTileLayer("mvdemo.demo_map"));
mapview.setCenter(MVSdoGeometry.createPoint(-122.45, 37.6706,8307));
mapview.setZoomLevel(4);
mapview.display();
//adds custom foi with label
var xmlDef = '<svg width="1in" height="1in">'+
'<g class="marker" '+
'style="width:40;height:40;font-family:sans-serif;font-size:20pt;stroke:0xff0000;fill:0x00ff00;stroke-width:1.5">'+
'<circle r="20"/>'+
'</g>'+
'</svg>';
var markerStyle = new MVXMLStyle("my_vector_icon_", xmlDef);
mpoint = MVSdoGeometry.createPoint(-122.30, 37.73,8307);
var v_result = new MVFOI("11", mpoint, markerStyle, null, 60, 60);
v_result.setHTMLElement('test label',0,0);
mapview.addFOI(v_result);
function mapPrint()
var a=document.getElementById("printmap");
mapview.print(a);
</script>
</head>
<body onload=javascript:showMap()>
<div id="map" style="position:absolute;top:50px; left:10px; width:600px; height:450px;border:0px"></div>
<div id="printmap" class="noscreen"></div>
<p>Please click <a href="javascript:mapPrint()">here</a> to print map</p>
</body>
</html>
Edited by: user12005064 on 27.02.2012 02:37
Maybe you are looking for
-
How can I print out a daily, weekly and or monthly calendar?
I am a busy person and find if I can print out my weekly calendar and have it nearby I can quickly plan my time better. Lorrene
-
Is it possible to add value date field in the debit entry?
Hi gurus, I'm an abapper and struggling to be an FI consultant since I have no one to consult with. Here's my issue: I want to add the Value Date field in a GL acct debit entry. I used optional in Field status group. It doesn't appear unless if I cha
-
Will Apple update iSync for seamless OSX integration with the Android 2.0 UI?
-
Best Practises and Lessons Learned
Looking for XI best practices and lessons learned. Do we have standard best practices docs from sap?. Please send me those docs....... [email protected] Looking for any support document for already implemented scenarios.
-
Windows 8 Preview + Creative Suite 5.5 Deisgn Premium
Hi I Have been one of those having Windows Vista, and I have now made a partition with 25GB space - with Windows 8 Preview. But as I boot into Win8 and thought I could run the Installation I made on my Vista, it just fails (It says this on all produc