Problems with password for alias email address
I am using two e-mail addresses, one the original @verizon.net and an alias I set up @alias.com
I was regularly -- but it seemed sporadically -- getting this following message, sometimes when I tried accessing, but sometimes just when the Apple Mail was open but I wasn't doing anything:
Enter the password for user “ -- alias address --” on IMAP server “mail.--alias--.com”
For a while I hit 'cancel' and everything worked fine.
But then I went into "account" and tried to fix the problem ... and I think I changed the password for the alias. In any case, I am unsure what the password is...and I can't see it on Preferences/Accounts.
Now the root "Inbox" and the "alias" addresses have the tilde by them, indicating offline. Nothing I do gets rid of the tilde. I get that same request for password.
Nonetheless I am still getting all e-mails through the secondary "Verizon" account. That does not have the tilde and is receiving all my e-mails.
I want to clean this up...and avoid the annoying continuing often request for password.
AS I WAS TYPING THIS, the message from Apple Mail popped up again. I had to hit 'cancel' or 'OK' (back and forth, each one) several times before it stopped popping up. This has happened before.
Have spent hours in Preferences/Account ... deleted account, replaced account ... tried SSL on and SSL off. Read "Help/If you can't receive messages". Used Connection Doctor.
I CAN send messages with my alias but am not receiving to it. This is a major problem for me.
There seems to be no way to find out what my correct password should be. I've got two in storage, one much more likely than the other. But neither works.
I'm also uncertain of incoming mail server correct name.
Similar Messages
-
I dont know the password nor can I remember the password for the email address I used years ago. Can anyone help me authorize my music I bought with my super old id?
See this -> Find My iPhone Activation Lock: Removing a device from a previous owner’s account
i just asked if someone knows the support mail, i don`t know how to someone from apple support
-> AppleID Support - Contact Support
Condolences to you and your family. -
I'm continually getting a pop-up message on my iPhone asking me to enter my Apple ID password for a email address I no longer use. How do I make it stop?
If you are signed into your current iCloud ID you shouldn't be prompted for the old ID unless there is another service still signed into it. Check the ID in iMessage (Settings>Messages>Send & Receive), FaceTime (Settings>FaceTime), Game Center (Settings>Game Center), the iTunes store (Settings>iTunes & App Store), etc. to make sure you aren't still signed in with the old ID. If you are, tap the ID, sign out, then sign back in with the new ID.
-
When setting up me new iphone - it is asking me for an iCloud password for an email address that doesnt belong to me - it is asking this info in order to retreive previously purchased items on itunes, etc. Help?
These are a couple different issues
The purchase issue means they came from a different Apple ID
You will need that Apple ID and password for those purchases
The iCloud account can be an Find My iPhone issue.
That could be the same Apple ID as the purchased or yet another one.
Once again you will need that Apple ID and password. -
HT6170 help with changing password for old email address
I changed my apple id to my new password over a year ago. Trying to restore my iphone and its asking for the password for my old apple id (old email address) which I no longer have access to. Tried the 'answer questions' to reset but it won't accept my valid birthdate. How can I make this prompt for my old email address go away and make it ask for my new one (new apple id). A similar issue is that iCloud keeps popping up asking for the password for my old email address as well.
You can't link to your new account (you created a new iTunes account, you didn't update your existing account ?) until removed removed the activation lock to your old account - you can then link it to your new account in Settings > iCloud.
If you can't get the password for your old account reset via http://iforgot.apple.com then try contacting Support in your country, after confirming your id and that it's your account they should be able to reset it for you.
Contacting Apple about account security : http://support.apple.com/en-us/HT5699
If your country isn't on that page then try this form and explain and see what they reply with : https://ssl.apple.com/emea/support/itunes/contact.html -
Problem with searching for 'empty' emails with BAPI_BUPA_SEARCH
Dear ABAP'ers.
I have got a small problem with BAPI_BUPA_SEARCH.
I Use this BAPI to search for Business Partners with the Email condition.
I put rhe Email to lv_email variable, it works ok.
lv_email = ' '
CALL FUNCTION 'BAPI_BUPA_SEARCH'
EXPORTING
email = lv_email
TABLES
searchresult = lt_searchresult <= returns no BuPas
return = ls_bapiret2 .
But I need to have a possibility to search for such Business Partners who have got no email address. Unfortunatellu when I pass an empty lv_email to BAPI, it returns no Business Partners whilst such BuPas exist in database.
Is there some possibility to search for those BuPas who have got no email address assigned?
I will be thankful for help.
Regards,
P.Can you query ADR6 table where SMTP_ADDR = space.
and pick the PERSNUMBER or ADDRNUMBER and pick the Patners related to that .. -
I have an irritating problem with mail autofilling info in email addresses. Emails sent to me the from looks like this: Holiday in the United States <my email address>. I have no idea what this Holiday in the United States is or how it got to be there...How can I fix/change to my name?
I fixed the To: autofilling incorrectly by deleting my email address from the Previous Recipients List, but is there a way to stop that from coming up on emails that I receive?Have you checked your Mac address book? If your email is saved somewhere in your address book with the name "Holidays in the United States" it might be adding the name automatically in Mac Mail.
Alternatively, try this:
Delete an Email Address from Auto-Complete in Mac OS X Mail
To remove an email address from the auto-complete list in Mac OS X Mail:
Start typing the recipient's address or name in a new message.
Select the desired address from the auto-complete list as if you'd compose an email to them.
Click the small down arrow in the recipient.
Select Remove from Previous Recipients List from the menu.
You can also search for the unwanted address directly in the previous recipients list:
Select Window | Previous Recipients from the menu in Mac OS X Mail.
Highlight the address you want to remove.You can highlight multiple addresses by holding down the Command key.
Click Remove from List.
Source: About.com -
Updating apps asks for apple id password for old email address
I clicked on update all for my apps and am asked to sign in to itunes store using the apple id password for an old email address.
Then sign in with that Apple ID. Whether your email changed or not is irrelevant. The Apple ID "name" (often the email address you originally used to sign up) should not change.
-
I had my phone replaced today and have tried to restore from the backup I made this morning. It didn't restore properly so I wanted to try again but I can't as it asks for my iCloud password for a non-existant email account. I changed my iCloud email about 6 months ago but my phone still thinks that is the correct email and I can't change it, can't reset my phone, can't do anything. What do I do?
The fact that the email address doesn't exist anymore doesn't matter. As far as the Apple ID is concerned, the email address is just a user name. As long as you know the password you used, it should be fine.
If you don't remember the password, start here:
https://iforgot.apple.com -
What if I no longer use my rescue email address and cannot remember the username or password that I set up as my rescure email?
You need to ask Apple to reset your security questions; this can be done by phoning AppleCare and asking for the Account Security team, or clicking here and picking a method, or if your country isn't listed in either article, filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(106063) -
Problems with password for WRT54G ver. 6
I just bought the router today and when I run the disc that came with the router it prompts me to enter a password and I can't get past that part of the process. I follow the directions exactly and then it tells me to put in some password. It starts with five letters already there and I press enter but it still comes back to put in a password. I tried putting in admin and it didn't work as it just gave me back the same password screen.
When I have the router connected through my modem it says that my local area connection is actually connected but I can't do anything on the Internet. I was able to connect wirelessly on my laptop but still couldn't use the Internet. If anyone could help me figure out how to fix this that'd be swell.Okay, I was able to now get to the router setup with 192.168.1.1 and I can advance past the password part, but when it attempts to connect to the Internet it tells me that my router can't recognize the Internet. When it gave me the advanced options about the connection it started with static IP and I put in the numbers that were the same under my local area connection, but when I tried to save those under the setup for the router it told me that the WAN and LAN addresses were the same. That's the problem I now face.
-
Problem with Dot(.) in email Address
Hi,
i send with VB Code (Word VBA 2007) an GW 7.0.3 Build 1294 a Mail to a Mail Address eg [email protected]
The Postmaster of abc.de recives [email protected]
any a idea what here is wrong...
tnx for help
Here is the complete code
'/// Send mail with GW //
Sub Send_GW_Mail(ByVal SinSendOpt As Single, _
ByVal StrMail_To As String, _
ByVal StrMail_Cc As String, _
ByVal StrMail_Bcc As String, _
ByVal StrMail_Betreff As String, _
ByVal SinAZ As Single, _
ByVal StrAnlagen As String, _
ByVal StrMail_Text As String, _
ByVal StrFuss_text As String)
Dim GW As Variant
Dim Acc As Variant
Dim GWMailFolder As Variant
Dim GWMessages As Variant
Dim GWMessage As Variant
Dim GWDraftMsg As Variant
Dim GWRecips As Variant
Dim GWRecip As Variant
Dim sRecieverTo, sRecieverCC, sRecieverBcc As String
Dim SenderDisplayName As String
Dim SenderEmailAddress As String
Dim CreationDate As Date
Dim iCount As Integer
Dim vCommander As Variant
Dim ParamStr As String
Dim MyMsgID As String
Dim sResult As String
Dim iRet As Integer
Dim sDOT, RecDot
Dim iPos, RecPos
Dim SenderEmailAddressType
Dim sAttachment
Dim egwIncoming, egwMessagePrivate, egwNormal, egwDefaultSecurity
Dim ToDot, CcDot, BcDot
Dim iElement As Long
Dim GWAddrBook As Object
Dim GWAccount As Object
Dim GWEntry As Object
Dim GWEntries As Object
Set GW = CreateObject("NovellGroupWareSession")
Set GWAccount = GW.Login()
Set GWAddrBook = GWAccount.AddressBooks("Primrbuch")
Set Acc = GW.Login
Set GWMailFolder = Acc.Mailbox
Set GWMessages = GWMailFolder.Messages
Set GWDraftMsg = GWMessages.Add("GW.MESSAGE.MAIL", "Draft")
sRecieverTo = StrMail_To
sRecieverCC = StrMail_Cc
sRecieverBcc = StrMail_Bcc
' Mail Betreff definieren
If StrMail_Betreff > "" Then GWDraftMsg.Subject = StrMail_Betreff
' Mail text (Body) definieren
GWDraftMsg.BodyText = StrMail_Text & Chr$(13) & vbCrLf & Chr$(13) & vbCrLf & Chr$(13) & vbCrLf & StrFuss_text
' Sender Name
GWDraftMsg.FromText = Acc.RootFolder.Name
' Anlagen Anfgen ################################################## ###
For II = 1 To SinAZ
If StrAnlagen(II) = "" Then
'nix
Else
GWDraftMsg.Attachments.Add StrAnlagen(II)
End If
Next II
' E-Mail Adresse zuweisen ################################################## ######
Set GWRecips = GWDraftMsg.Recipients
'Wenn ein Komma kommt
sRecieverTo = Replace(sRecieverTo, ",", ";", 1)
sRecieverCC = Replace(sRecieverCC, ",", ";", 1)
sRecieverBcc = Replace(sRecieverBcc, ",", ";", 1)
'Email Empfnger Aufsplitten
ToDot = Split(sRecieverTo, ";")
CcDot = Split(sRecieverCC, ";")
BcDot = Split(sRecieverBcc, ";")
' MailTo Zuweisen
Dim StrDisplayName, StrMailAdress
For iElement = 0 To UBound(ToDot)
If ToDot(iElement) = "" Then
Exit For
Else
StrMailAdress = CStr(Trim((ToDot(iElement))))
StrDisplayName = Split(CStr(Trim((ToDot(iElement)))), "@", , vbTextCompare)
StrDisplayName(0) = Replace(StrDisplayName(0), ".", " ", 1, , vbTextCompare)
Set GWEntries = GWAddrBook.AddressBookEntries.Find("(<Email-Adresse> Matches " & """" & StrMailAdress & """" & ")")
If GWEntries.Count > 0 Then
Set GWEntry = GWEntries.Item(1)
Else
Set GWEntry = GWAddrBook.AddressBookEntries.Add(StrDisplayName(0 ), StrMailAdress, "NGW", "")
End If
Set GWRecip = GWRecips.Add(GWEntry.EMailAddress, "NGW", 0) '1 = CC and 2 = BC
GWRecip.DisplayName = GWEntry.DisplayName
GWDraftMsg.Recipients.Resolve
'GWRecip.EmailType = "NGW"
End If
Next iElement
Erase StrDisplayName
StrMailAdress = ""
For iElement = 0 To UBound(CcDot)
If CcDot(iElement) = "" Then
Exit For
Else
StrMailAdress = CStr(Trim((CcDot(iElement))))
StrDisplayName = Split(CStr(Trim((CcDot(iElement)))), "@", , vbTextCompare)
StrDisplayName(0) = Replace(StrDisplayName(0), ".", " ", 1, , vbTextCompare)
Set GWEntries = GWAddrBook.AddressBookEntries.Find("(<Email-Adresse> Matches " & """" & StrMailAdress & """" & ")")
If GWEntries.Count > 0 Then
Set GWEntry = GWEntries.Item(1)
Else
Set GWEntry = GWAddrBook.AddressBookEntries.Add(StrDisplayName(0 ), StrMailAdress, "NGW", "")
End If
Set GWRecip = GWRecips.Add(GWEntry.EMailAddress, "NGW", 1) '1 = CC and 2 = BC
GWRecip.DisplayName = GWEntry.DisplayName
GWDraftMsg.Recipients.Resolve
End If
Next iElement
Erase StrDisplayName
StrMailAdress = ""
For iElement = 0 To UBound(BcDot)
If BcDot(iElement) = "" Then
Exit For
Else
StrMailAdress = CStr(Trim((BcDot(iElement))))
StrDisplayName = Split(CStr(Trim((BcDot(iElement)))), "@", , vbTextCompare)
StrDisplayName(0) = Replace(StrDisplayName(0), ".", " ", 1, , vbTextCompare)
Set GWEntries = GWAddrBook.AddressBookEntries.Find("(<Email-Adresse> Matches " & """" & StrMailAdress & """" & ")")
If GWEntries.Count > 0 Then
Set GWEntry = GWEntries.Item(1)
Else
Set GWEntry = GWAddrBook.AddressBookEntries.Add(StrDisplayName(0 ), StrMailAdress, "NGW", "")
End If
Set GWRecip = GWRecips.Add(GWEntry.EMailAddress, "NGW", 2) '1 = CC and 2 = BC
GWRecip.DisplayName = GWEntry.DisplayName
GWDraftMsg.Recipients.Resolve
End If
Next iElement
Erase StrDisplayName
StrMailAdress = ""
SenderDisplayName = ""
SenderEmailAddress = ""
SenderEmailAddressType = "NGW"
CreationDate = Now
Set GWMessage = GWMessages.AddExistingMessage(SenderDisplayName, SenderEmailAddress, SenderEmailAddressType, _
CreationDate, egwIncoming, egwMessagePrivate, egwNormal, egwDefaultSecurity, GWDraftMsg)
GWMailFolder.Refresh
Set GWMessages = Nothing
Set GWMessages = GWMailFolder.Messages
' Send or Show - 1 = sho Msg / 2 = send direct
If SinSendOpt = 1 Then
' Open the new message to view it and add recipient(s) manually
MyMsgID = GWMessage.MessageID
Set vCommander = CreateObject("GroupWiseCommander")
ParamStr = "ItemOpen(""" + MyMsgID + """)"
iRet = vCommander.Execute(ParamStr, sResult)
GWMessage.Delete
Exit Sub
ElseIf SinSendOpt = 2 Then
' Direkt senden
GWMessage.Send
GWMessage.Delete
MsgBox "Ihre Mail wurde gesendet!", vbInformation, "Mail sent"
Else
' Open the new message to view it and add recipient(s) manually
MyMsgID = GWMessage.MessageID
Set vCommander = CreateObject("GroupWiseCommander")
ParamStr = "ItemOpen(""" + MyMsgID + """)"
iRet = vCommander.Execute(ParamStr, sResult)
GWMessage.Delete
Exit Sub
End If
'resetVariables
call ResetVariables
'VariablenZurcksetztenHi,
The object GWMessage and GWAccount can't support the email username with dot, you need change the the email username if it include the Dot.
novanet. -
Problems with video in my email address
Whatc view video from my email address
Well, it's still not very good quality, and I don't have any further options for the MPEG-4 setting. I think I'll have to play with the different compression formats. The DV/DVCPRO format worked better than MPEG-4, but it's still not very good.
Thanks for your help. -
Problems with getting my mediacom email address to work on my motorola razr HD
I recently upgraded my motorola droid x to a motorola Razr and am trying to get my mediacom email account to work on my new phone. I entered the information from my old phone into my new phone exactly the same and it doesn't work. Any suggestions??? These setting worked great on my droid x but not on my new droid razr I've asked both the verizon techs and the mediacom techs and no one seams to have an answer.
incoming sever: pop3
sever mail.mediacombb.net
username: [email protected]
password: my password
port: 995
tsl: auto
outgoing sever: mail.medicombb.net
username: [email protected]
password: my password
port: 465
tsl: alwaysThese instructions from Mediacom differ slightly from what you have:
http://mediacomcable.com/CustomerSupport/troubleshooting/email%20getting%20started/HowdoIsetupmyAndroidSmartphonetouseMediacome-mail.html -
Problems with password for options on Blocksite 1.1
I downloaded Blocksite Plus 1.1 When I hit "options" to try and list websites I want to block the "enter password" window comes up. I enter my FF master password and get "access denied." I enter my FF sign in password and get "access denied." What am I doing wrong?
Sounds that you hit a password protection feature that the extension incorporates do prevent others from changing settings.
From https://addons.mozilla.org/en-US/firefox/addon/blocksite/
<blockquote>Password protection<br />
If you lost your password: go to about:config (type about:config in the location bar and press enter) and reset the BlockSite.authenticate entry or clear the BlockSite.password entry.</blockquote>
Maybe you are looking for
-
Simple button scripts not working in AS2
Hi there, I am at my wits end. I've tried about 2 dozen tutorials word for word and they don't work and I just keep getting lots of strange errors. I have a very simple 4 frame scent with a forward and backward arrow on each frame to link them togeth
-
Hard Drive is dead - deciding what to do next
Hi all, My computer is a 12 inch Powerbook G4. My hard drive is dead. Here's what happened. Night before last my powerbook was freezing randomly. In retrospect the HDD was making some clicking noises but not consistently. Following morning it freezes
-
Is there a restore point?
I bought about 5 songs on iTunes. I tried to put them on my iPod, but it said something like "This can only hold songs from 5 accounts" I wasn't completely sure what this meant. So, I tried making my iPod so that it would automatically sinc the sings
-
Hello there are different opinions on how to get the swap space on Solaris. some say: swap -s and the space= used + available others say swap -l (donno how they get the swap size) other say 'top' command others say using format command (in print sub-
-
After upgrading Safari this morning, I can no longer open RSS feeds. When I try to read an rss feed, it opens mail. How can I read rss feeds in Safari?