Problems with pci--gpib-300k from computerboards

hallo,
i have problems with my gpib-card, win95 and 2000 identify this card
corectly but labview not, the max 2.0 find not cards.......have everyone the
self card and can help????
(sorry for my bad english..)
bye & thanks...
Thomas

Thomas,
The short answer is the MAX will not recognize non-NI devices. NI-MAX was designed to recognize and interface with National Instruments' boards such as our PCI-GPIB, AT-GPIB/TNT, etc. With the introduction of MAX2.0 and NI-VISA2.5, there was an added capability to recognize some Hewlett-Packard boards but even then, configuration of them must be done from an HP interface.
LabVIEW will interface with the board fine but MAX is designed specifically to interface with our drivers for our boards.
Ryan Mosley
National Instruments, Applications Engineer
http://www.ni.com/exchange

Similar Messages

I have problems with pci-gpib card under windows me, What I need to know what to do in order to fix this problems?

Hi, I have installed a pci-gpib card in my computer, I have a problem with
installation, the message of troubleshooting wizard is as follow:
"One or more missing GPIB interfaces.
There are several reasons why you might encounter this problem:
Reason: Your GPIB interface is incorrectly installed.
Solution: Please verify that your GPIB interface is correctly installed
and rerun the NI-488.2 Troubleshooting Wizard.
Reason: You are using a non-Plug-and-Play interface (e.g., AT-GPIB/TNT,
GPIB-PCII/IIA, GPIB-ENET) and you did not use the Add New Hardware Wizard
to add the interface to your system properly.
Solution: Click th
e Add Hardware button and the Add GPIB Hardware wizard
will guide you through the process of adding GPIB hardware.
Reason: For the GPIB-USB and GPIB-1394, the host controller (USB or 1394)
must be working properly in order to use the GPIB interface.
Solution: Click on the System Details button for details about the USB and
1394 host controllers.
Reason: For the PCMCIA-GPIB and PCMCIA-GPIB+, the PCMCIA host controller
must be working properly in order to use the GPIB interface.
Solution: Use the Windows Device Manager to verify that your PCMCIA host
controller is functioning correctly. Start the control panel by selecting
"Start>>Settings>>Control Panel", open the System icon and select the
Device Manager page. If you select "View devices by type", you can look at
the PCMCIA socket properties to ensure it is correctly enabled."
And on system details the message is the next:
"USB Driver type: USB universal host controller"
"This version of windows does not su
pport IEEE 1394."
I am using Windows Me, so i want to know what i need to do to fix this
problems.
Best regards.

If you have a PCI-GPIB card, you needn't worry about the USB port or whether or not Windows ME supports 1394. All you need in NI-488.2 version 1.70 from National Instruments. Install this driver and then insert your card. Windows should detect the card and find the proper driver.
If this did not happen in the proper sequence, look in the device manager and see if the card was installed as an "other device". If this happens, remove the card in the device manager and have windows redetect it. If this is not a solution, you may consider the ask an engineer page at www.ni.com/ask. Provide as many details as possible.

W2K crashes with PCI-GPIB

I am using a PCI-GPIB card under W2K, with driver version 1.60. All diagnostics
indicate that the card is functioning correctly, and there are no hardware
conflicts. I am able to use WaveStar to communicate with the Tektronix 694C
scope. When using Excel/VBA macros to control an oscope, W2K crashes to
a blue screen, with the message:
Hardware Failure
Please Contact Hardware Vendor
A hard reset is required to re-start the system. There is no error logged
by W2K, and using NI Spy reveals no consistent macro command that is causing
the failure. I have followed all the suggestions in the Troubleshooter,
Knowledge Base, etc. I have tried a different PCI-GPIB card from an known-good
system. I have tried this card in a
different, identical system. Any other
suggestions would be greatly appreciated.
Thanks,
Cory Allen

I am using a Pentium III 733/Intel VC820 motherboard/256M RAM/Matrox Millenium
G400 that was built by our IT dept. In addition to the GPIB card, there
is an Intel PRO/100+ network card, an In-Target Probe (ITP) card, and a SoundBlaster
Live (which has since been removed, reducing the frequency of the crashes,
but not eliminating them.). I have tried a variety of PCI slot configurations.
Thanks,
Cory
"Eric Singer" wrote:
>What type of computer are you running? Please indicate the make and model.>>Thanks,>Eric
Singer>"Cory Allen" wrote in message>news:[email protected]..>>>>
I am using a PCI-GPIB card under W2K, with driver version 1.60. All>diagnostics>>
indicate that the card is functioning correctl
y, and there are no hardware>>
conflicts. I am able to use WaveStar to communicate with the Tektronix>694C>>
scope. When using Excel/VBA macros to control an oscope, W2K crashes to>>
a blue screen, with the message>>> Hardware Failure>>>> Please
Contact Hardware Vendor>>>> A hard reset is required to re-start the system.
There is no error logged>> by W2K, and using NI Spy reveals no consistent
macro command that is>causing>> the failure. I have followed all the suggestions
in the Troubleshooter,>> Knowledge Base, etc. I have tried a different PCI-GPIB
card from an>known-good>> system. I have tried this card in a different,
identical system. Any>other>> suggestions would be greatly appreciated.>>>>
Thanks,>> Cory Allen>>>>

Problems with importing text messages from PC Suit...

Problems with importing text messages from PC Suit 7.1.18.0 to my Nokia 5800
I am trying to import a csv file that contains text messages (Note that this file was created using PC Suit 7.1.18.0) to a subfolder that I have created to My Folders but PC Suits only imports the text messages to the Draft folder. Note that initially it shows that the messages are import in the correct folder but after a refresh it shows them in the Draft Folder. Is their any setting that I should change in the PC Suit or the phone? My computer runs on Windows XP Service Pack 3 and the Nokia 5800 was upgraded to the latest firmware v20.0.012
Thanks for your help

Most phones only allows importing of draft and archived box for SMS.
To do a restoring, you need to backup the SMS as a .nbu file using PC Suite and restore later.
If you got an SD card, you can also do a backup on the SD Card (backup.arc) then restore later (reset and restore: backup.arc and mmc).
What's the law of the jungle?

Cisco ASA 5505 - problem with negotiating IP address from PPPoE

Hi all,
I have problem with negotiating IP address from PPPoE. There is following design: ISP providing vDSL ending on VDSL modem in bridge mode. Behind brigde modem is ASA 5505 terminting PPPoE on OUTSIDE. Everything works fine except negotiating IP address from PPPoE server.
I have configured ASA 5505 with (ASA Version 9.2(2)4) for PPPoE like this [1.]. But If i try to "show" IP address on OUTSIDE interface a get this [2.], ok strange but let's continue. If list "show vpdn pppinterface id 1" i get this [3.]. Seems that I got public IP addres what was right, but this IP address was not associated with interface OUTSIDE?
Well, if I set IP address manually like this [4.] and also set a default route everything works fine but what will happen when ISP change reservation for my IP address or default gateway.
I have tried different version of ASA OS like 8.4, 9.1 but without luck.
Can anybody help me. Thanks a lot.
Regards
Karel
[1.]
interface Vlan100
description >>VLAN pro pripojeni do internetu<<
nameif OUTSIDE
security-level 0
pppoe client vpdn group O2
ip address pppoe setroute
vpdn group O2 request dialout pppoe
vpdn group O2 localname O2
vpdn group O2 ppp authentication chap
vpdn username O2 password *****
interface Ethernet0/0
description >>uplink O2 vDSL<<
switchport access vlan 100
[2.]
ciscoasa(config-if)# show ip address vlan 100 pppoe
ciscoasa(config-if)# 0.0.0.0 255.255.255.255 on Interface: OUTSIDE
ciscoasa(config-if)# show interface vlan 100 detail
Interface Vlan2 "OUTSIDE", is up, line protocol is up
Hardware is EtherSVI, BW 100 Mbps, DLY 100 usec
        Description: >>VLAN pro pripojeni do internetu<<
        MAC address f44e.05d0.6c17, MTU 1492
        IP address unassigned
Traffic Statistics for "OUTSIDE":
        28 packets input, 1307 bytes
        31 packets output, 721 bytes
        0 packets dropped
      1 minute input rate 0 pkts/sec, 3 bytes/sec
      1 minute output rate 0 pkts/sec, 1 bytes/sec
      1 minute drop rate, 0 pkts/sec
      5 minute input rate 0 pkts/sec, 0 bytes/sec
      5 minute output rate 0 pkts/sec, 0 bytes/sec
      5 minute drop rate, 0 pkts/sec
Control Point Interface States:
        Interface number is 15
        Interface config status is active
        Interface state is active
[3.]
ciscoasa(config-if)# show vpdn pppinterface id 1
PPP virtual interface id = 1
PPP authentication protocol is CHAP
Server ip address is 88.103.200.41
Our ip address is 85.71.188.158
Transmitted Pkts: 20, Received Pkts: 16, Error Pkts: 0
MPPE key strength is None
MPPE_Encrypt_Pkts: 0, MPPE_Encrypt_Bytes: 0
MPPE_Decrypt_Pkts: 0, MPPE_Decrypt_Bytes: 0
Rcvd_Out_Of_Seq_MPPE_Pkts: 0
ciscoasa(config-if)# show vpdn session state
%No active L2TP tunnels
%No active PPTP tunnels
PPPoE Session Information (Total tunnels=1 sessions=1)
SessID TunID Intf     State       Last Chg
22298      2 OUTSIDE SESSION_UP 561 secs
[4.]
interface Vlan100
description >>VLAN pro pripojeni do internetu<<
nameif OUTSIDE
security-level 0
pppoe client vpdn group O2
ip address 85.71.188.158 255.255.255.255 pppoe setroute
route OUTSIDE 0.0.0.0 0.0.0.0 88.103.200.41 1

You're right that the ACL should not affect otherwise allowed communications to the interface address.
Try disabling the ip audit feature on your outside interface.
no ip audit interface OUTSIDE AP_OUTSIDE_INFO
no ip audit interface OUTSIDE AP_OUTSIDE_ATTACK

After update 8.1.2 i had problem with sync my content from ITunes with IPod

After update 8.1.2 i had problem with sync my content from ITunes with IPod. It stucks on moment when its waiting for implementing changes (step 5 of 5) Hours and hours i'm waiting but still the same. So i cant use my Ipod at all. I restarted Ipod and delete and download Itunes again. Still stuck in the same moment. Help please. Someone has some problems like that?

I have an error message saying that "An unknown error occurred (-54)"

Problem with pdf display downloaded from application server

Hi all,
I have a problem with displaying pdf downloaded from application server (saved in BINARY MODE).
I am getting the pdf output of adobe form in FPFORMOUTPUT-PDF as rawstring back to my program and then converting that rawstring into binary form using the function module SCMS_BINARY_TO_STRING.
Now, when I export the data to presentation server directly using cl_gui_frontend_services=>gui_download, the pdf is downloaded properly.
However, when I save the data to application server file by looping at the internal table obtained from SCMS_XSTRING_TO_BINARY and using TRANSFER, and subsequently downloading the file in "unconverted format" from AL11 to my desktop, I am getting a "blank" pdf file (with the same number of pages as the one downloaded using gui_download).
I have tried different encodings during download but in those cases i get corrupted pdf message. only the default option of INTIAL value seems to work.
I am forced to believe that there is a problem in my code which saves the data to app server but I cant find any solution that is logical. Any solution to this would be greatly appreciated.
Regards,
Sasi
Edited by: Sasi Upadrasta on Sep 29, 2010 7:55 PM

used a program to read the file from appl server and then downloading it to desktop.

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

haben
From looking at the specifications of your camera (SJCam 4000), we know already what video compression your camera is using. It is H.264.
A H.264.mov file should be supported by Premiere Elements 11. On what computer operating system is your Premiere Elements 11 running?
Do you have the latest version of QuickTime installed on your computer? And, are you running QuickTime and Premiere Elements 11 from a
User Account with administrative privileges? Please go to Premiere Elements 11 Publish+Share/Computer/QuickTime to confirm that you find
presets there for the QuickTime choice there.
What are the properties of these H.264.mov files - is it 1080p30 (1920 x 1080p30) or something else? Do you know if this camera is recording with a variable or
a constant frame rate?
Please review and consider and then we will decide what next.
Thank you.
ATR

HT204150 I'm having problems with random contacts disappearing from icloud. I have a saved text from a contact that displays her info but when I look for her in contacts it's missing.

I'm having problems with random contacts disappearing from icloud. I have a saved text from a contact that displays her info but when I look for her in contacts it's missing.

It is locked to your sisters carrier.
She would have to ask her carrier if they unlock iPhones and if she qualifies for this service.

Problem with access to SipFactory from jsp-pages in JBoss environment

Hello!
I have an installation of the OCMS 10.1.3.3. deployed into a JBoss (jboss-4.0.5.GA) environment. Unfortunately I have a problem with accessing the SipFactory from a jps-page. Encouraged by the "messagesender" example I tried to get an instance of SipFactory from my jsp-page simply by calling:
SipFactory sipFactory = (SipFactory) application.getAttribute(SipServlet.SIP_FACTORY);
But unfortunately there seems to be no attribute "SipServlet.SIP_FACTORY" and I only get a null pointer. I have also tried running that code in the orignal messagesender example but it didn't work either. So I wonder if this should definetely work in a JBoss environment or if this might be a known problem. Is there anything that I could check/do regarding this problem? I suppose there must be an oracle module which should take care of making the SipFactory availabe after it is deployed. Perhaps something went wrong during the deployment?!
Best regards,
Tim

Hi
On JBoss, OCMS does not support converge applications.
I.e the SipFactory can be retrieved from the servlet context when running on OC4J.
Instead the SipFactory can be found in JNDI as described in the Developer's Guide:
"External Access to SIP Servlets
To enable convergent applications between SIP and HTTP, the OCMS Container allows you to get access to the javax.servlet.sip.SipFactory by looking it up through JNDI. The SIP Factory will be registered under the same name as the display name of your SIP servlet as illustrated in Example 2–12. The <display-name> in the sip.xml in this case must be "My sip app".
Example 2–12 Accessing the Data for a SIP Session through JNDI
InitialContext ic = new InitialContext();
SipFactory sipFactory = (SipFactory)ic.lookup("sip/My sip app");"
Cheers
Lucas Persson

Problem with downloading individual songs from an already purchased album to iPhone

Hi All,
I'm having problems with downloading single songs from the "purchased" list onto my iPhone. I reset my phone and went to redownload my music, however i only want to download certain songs from different albums which in the past i've been able to do by navigating to the purchases section of the itunes app, then opening each album and selecting the cloud like icon by each song i want.
Having tried this today, i get the list of songs however the all have a "Purchased" next to them which is greyed out and the only way to download anything is to get the whole album. I've not got iTunes match on and can't think of any settings i've changed, can any suggest what i need to do to enable me to just get a selection of songs?

Actually Michael I know exactly how to delete.. The iPhone would not let me swipe to the left to delete the individual song, so I went to the album view and did it there.. The issue I am having is a bug because it removed 3/4 of the albums availablity off my iPhone.. You post proved no help because it is basic troubleshooting which, if you read my post, I have already done.. I did however figure out how to fix my issue on my own.. Basically I had to remove the album from my iTunes on my computer and upload it again to iTunes Match..

I have a problem with downloading app (Twitter) from App Store.

I have a problem with downloading app (Twitter) from App Store. I don't want this app. It is not downloaded yet, the download is still in progress. I have limited data plan and I don't have a chance to finish the download via PC. The size of the app - 33 mb. Could you please cancel the download process so I will be able to remove the icon.

Most of the people on these forums, including myself, are fellow users - you're not talking to iTunes Support here.
Are you able to connect to a wifi network - tapping the app should pause the download of the app and change it to 'waiting', so you should be able to pause the download until you have access to a wifi network.

HT1338 I have a problem with opening downloaded files from the internet; zip types. Can you tell me an app to open these types of formats of files?

I have a problem with opening downloaded files from the internet; zip types. Can you tell me an app to open these types of formats of files?

It should unzip if you double-cick.
What are you seeing happen when you do that?
Select a .zip file in the Finder and Get Info (cmd-i). What is set for it to Open With. It should be Archive Utility.

Is anyone experiencing problems with opening mission control from the desktop. Running mountain lion with parallels 7 and windows 7

is anyone experiencing problems with opening mission control from the desktop. Running mountain lion with parallels 7 and windows 7

I had been having a similar problem on Lion with Safari pdf files despite downloading the latest Adobe Reader XI.
I would constantly get the same messages - There was an error opening this document. The file is damaged and could not be repaired. And I would get a blank page when I tried to print the pdf if I tried printing from the Safari web page using File - Print from the top toolbar on my laptop.
Then I came across the grey Safari lozenge with action icons.
This allowed me, without downloading the pdf, to print the pdf file direct from the Safari page by using the Print icon on the grey lozenge that appears centrally three quarters down the screen.
Then I discovered that if I save the pdf using the Save icon from this same grey lozenge on the Safari page I can open and print this pdf version from my desktop.
I've tested it with a couple of different pdf files and these methods work using the grey lozenge icons but the same pdfs files don't work using File - Save As on the Tool Bar.

Probleme with PCI Express Root Complex

I bought an hp 15t - j100 with Windows 8.1 but on windows 8.1 but i needed change to windows 8 and now i have a problem with PCI Express Root Complex code 28. The drives i have donwload for hp site http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4158&lc=en&cc=us&dlc=en&sw_lang=&product=6521...
I need help to solve that problem
thanks
and i waiting for help
This question was solved.
View Solution.

Hi:
You need this driver...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124661-1&cc=us&dlc=en&lc=en...

Problems with pci--gpib-300k from computerboards

Similar Messages

Maybe you are looking for