Problems with permissions on file-repositories
Hello Forum,
i'm getting confused while i'm testing the differences between the acl/w2k security managers.
My Konfig:
Networkpath
filehost\ep6
user
domain\j2ee
(this user has full-access to all docs)
then i configured 3 File-Reps, all pointing to the same share (
filehost\ep6):
EP6 no security-manager
EP6_ACL acl security manager
EP6_W2K w2k security manager
(Portal-User mapped to the windows-User)
I expect:
- EP6 access to all documents
- EP6_ACL access to documents where i have granted access to my portal user via permissions in the KM-Content
- EP6_W2K access to documents where the mapped windows user has been granted access on the filesystem
This is what i get:
All three Repostories behave in the same way.
- my Portal User can only access Files, where the
domain\user has been granted access
- it seems, that the assigned security-managers didn't work
- EP6_ACL it makes no difference if i assign restrictions to the KM-ACLs
- EP6_W2K it makes no difference if i assign permisons for my windows-user on the os
Where is my fault.
Do I have to deal with some caching-problems?
Do i have to use three different Locations on the filehost?
Thanks in advance.
Frank Winkler
Hi Frank,
in the rough context, check this new paper that describes how Windows File Servers can be integrated into the SAP KM platform using SSO and the WebDAV repository manager:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/kmc/integration of windows file servers into the sap km platform using sso and the webdav repository manager.pdf
Regards, Karsten
Similar Messages
-
Problem with permissions on files brought down from server
We have 19 new macPros running 10.5.2. Users log in as a standard users. They often have a need to move files down from a NAS on the network and then pass those file onto another department for additional work and output. Unfortunately, even though the user is listed as the owner of the file the group and guest are set to read only and the permissions are locked and the user cannot unlock the file permissions without an administrator name and password (which we would rather not give them). We did not have these problems with Tiger. Anyone know what is going on with these permissions?
This is happening on all the machines? Is this normal or is there a problem with the installation? The machines were all imaged using the same software.I guess we're the only ones?
What make is your NAS Alex? -
Problems with permissions of files written over a share
Hello,
I have 2 sharepoints, with his permissions working ok...
If I create a file in a client computer 10.4.8 and copy this file to the share, the file assumes the permissions of the share, (Owner=RW, Group=RW) but if I create a file from an application, example, TextEdit or FreeHand, and save it directly over the share, the file doesn´t assumes the permissions of the share, it remains read only for a group, although it must to assume those of the share, read/write for a group. I dont know what happend, and how to fix it.
help will be appreciated
thanks
felixI too am experiencing this problem. We have a small 7 user workgroup of mostly PCs but some Macs and a single linux box on a Tiger server running 10.4.7 (maybe I should upgrade it to 10.4.8 which is supposed to fix some permissions problems).
The problem started on Wednesday when one of our people changed some permissions for a folder and all its contents using the Get Info dialogue. Ever since then we have had permissions problems.
I wrote a file on my PowerBook, emailed it to a colleague, she saved it, now I cannot edit it. Not only that, I cannot login to the server either, despite having Admin privileges. I could login as super user, but haven't done that yet.
The reason he had to change the permissions was because he recently set a folder up as a sharepoint with limited access when it had previously run happily as part of another folder with wider access. He's not a Mac user but prefers Linux so it's possible he made a wrong move. Since Tiger is so hard to administer anyway, I can't immediately see what is wrong.
The permissions in Workgroup Manager appear to be using POSIX settings without inheritance. I guess I'll have to change all the shares to Inherit Permissions. Maybe I'll try the ACL route as suggested here too.
Any other ideas?
TIA
MacMini, PowerBook G4, PowerMac G5 DC, Intel iMac 17 Mac OS X (10.4.8) Mac OS X Server 10.4.7 -
Tempo problems with imported wav files
Hey everyone, sorry if there's a quick fix for this in the forums that I couldn't find, but I've been having some tempo problems with imported .wav files.
Long story short, my system couldn't handle playing all the tracks for a song while recording drums, so I bounced out an mp3 of the song and put it in a new Logic file so my drummer could just play along to that as I recorded him. Unfortunately, the original song is at 167 bpm, but I forgot to change the bpm in the new Logic file with the .mp3 file of the song to 167 bpm, so it was left at the default 120 bpm.
So, the drums were recorded at the correct 167 bpm, but Logic thinks that those new drum .wav files should be played at 120 bpm, so when I import my drum tracks back into the original file, they do not play correctly at all.
I could get record it all again, but I wanted to check if there was a way I could salvage what I already have, since my drummer lives about an hour away right now and can't just come over whenever he wants.
Thanks for the help! I really appreciate it.Hi,
First, do not use MP3 in Logic, the sound quality is less than AIFF, WAV or CAF, and Logic has to decode it for playback, making it a heavier burden on the CPU than an uncoded audiofile, such as AIFF, WAV or CAF.
Secondly, audio files are independent of Logic's tempo. If you bounce down an audio file in any format (other than Apple Loop), it will play back at the same speed, +regardless of Logics' tempo setting+, either at recording or playback. Logic doesn't 'think' anything. The BPM is only important to MIDI tracks, or to the spacing between audio files. The audio files themselves *are not affected* by the tempo setting. If you import an audio file of tempo 167 into a 120 BPM project, the file will still play at 167, only Logic will indicate the wrong bar positions.
regards, Erik. -
Problem with preview PDF files on Windows 7 32bit
Hello,
in my office I have a problem with preview PDF files on my computers. The files are allright, but if I select a file and click on preview mode after ~ 10sec operation system write something "Preview this file is corrupt for PDF Preview Handler wrong". On other 64bit computers with same programs the preview is work. I try uninstall all Adobe soft (Reader, Flash), clean all Adobe data from folders in root and in register, but it is not solve this problem. On Microsoft forums wrote me, that the problem is probably with AR plugin.
So, can someone help me?
Config PC:
Windows 7 32/64bit Pro
Intel i3, 4GB
Adobe Reader 11.0.5
Adobe Flash Player 15 ActiveX
Adobe Flash Player 15 plugin
Preview Handler Surrogate Host ver.: 6.1.7601.17514
Thank you for help.I think I figured it out after reading other forums. Thanks!
-
Problem with printing pdf file
hello,
lately i have problem with printing pdf file:
i click on the print button and the respod is very slow
it takes more than a minute till the print window apears.
i tryied to install version X but it's the same, the problem exist only when printing via adobe reader,
other programs i'd working much faster.
please advice,
thank youNo, it is not set to overprint. Also, I have to add that the printing results were not consistent. Sometimes it covered and sometimes it did not.
-
Problem with uploading a file in Clustered Environment
Hi,
I have a problem with uploading a file in a clustered environment. I have an iview component which facilitates an upload action of an xml config file. The problem is that the upload of the modified XML file is reflected only in the central instance of the cluster and not in the dialog instances. The dialog instances hold the old config file.
Is there any solution to upload the file to all the nodes in the cluster.
Thanks
KiranHi,
This is a known problem with clustered environment. Remember that your portal component runs on just on dialog instance and it doesn't automatically have access to the other nodes. However, there are some ways to get around this
1. Use KM to store files. KM is a common repository for all application servers and therefore you needn't worry more
2. Use an external batch oriented product (suresync/robocopy) to synch folders on the different DIs. You basically use your existing portal component, but there is a batch job which makes sure the upload folder is identical on all DIs (however, there is a slight delay depending on how often you run the batch job)
3. Store the files on a shared disk directly from the portal component.
Cheers
Dagfinn -
Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?
haben
From looking at the specifications of your camera (SJCam 4000), we know already what video compression your camera is using. It is H.264.
A H.264.mov file should be supported by Premiere Elements 11. On what computer operating system is your Premiere Elements 11 running?
Do you have the latest version of QuickTime installed on your computer? And, are you running QuickTime and Premiere Elements 11 from a
User Account with administrative privileges? Please go to Premiere Elements 11 Publish+Share/Computer/QuickTime to confirm that you find
presets there for the QuickTime choice there.
What are the properties of these H.264.mov files - is it 1080p30 (1920 x 1080p30) or something else? Do you know if this camera is recording with a variable or
a constant frame rate?
Please review and consider and then we will decide what next.
Thank you.
ATR -
Hi! I´m having problems with showing video files in Qlab on my Macbook Air. It started suddenly. Consulted a sound/video technician who told me to "blow out" my Mac. Was told to use cmd+r when restarting. Is this the right way to clean up my Mac? And is it likely that some kind of bug is causing problems for Qlab to show video files? I´ve already tried with a bunch of different video files and sometimes Qlab plays them and sometimes not. I need the Qlab playlist for a theatre show and only have a week until showtime so starting to really worry. Is there anyone out there who can help?
Your Mac runs maintenance in the background for you.
Command + R gives you access to restore, repair, or reformat the drive using OS X Recovery
No idea why that was suggested.
You may have a third party video player installed that's causing an incompatibility issue.
Check these folders:
/Library/Internet Plug-Ins/
/Library/Input Methods/
/Library/InputManagers/
/Library/ScriptingAdditions
~/Library/Internet Plug-Ins/
~/Library/Input Methods/
~/Library/InputManagers/
~/Library/ScriptingAdditions
The first four locations listed are in the root-level Library on your hard disk, not the user-level Library in your Home folder.The tilde (~) represents your Home folder.
To access the Home folder in OS X Lion or Mountain Lion, open the Finder, hold the Option key, and chooseGo > Library. -
I can not do the update , what should I do to fix this error ?
"There was a problem with downloading the file . For tips on troubleshooting , please go to Customer Support . ( Error code : 204 ) ." thanksHi,
Please refer to the help document below:
Error downloading, installing, or updating Creative Cloud applications
Regards,
Sheena -
InDesign CS5 causing problems with InCopy assignment file but not content files
I'm having a strange InDesign/InCopy CS5 issue (Mac OSX 10.6.6; all system & Adobe updates are current). In my InDesign doc I have one assignment file containing two content files. All of the InCopy pieces work fine in InDesign (i.e., I can check out/in, edit, etc.). When I go to open the assignment file in InCopy, InCopy starts to open it but then crashes. If I try to open each content file directly in InCopy, no problem. I've tried deleting and recreating new assignments in InDesign, but they all have the same result in InCopy.
I think this actually is a problem with the InDesign file because if I export the InDesign file to IDML, then try to open the IDML file, InDesign crashes! I've trashed my InDesign preferences, made sure all cross-references are up to date, etc. Anybody have any ideas what else to look for in my InDesign file that might cause this problem?
Thanks!
AndreaThanks John!
1) Here are the first 10-ish lines from the crash report that is generated when I try to open the IDML file:
Thread 0 Crashed: Dispatch queue: com.apple.main-thread
0 ??? 0xa0c266f0 _XHNDL_trapback_instruction + 0
1 com.adobe.InDesign.Indexing 0x20778192 GetPlugIn + 341394
2 com.adobe.InDesign.Indexing 0x20779009 GetPlugIn + 345097
3 PublicLib.dylib 0x0129228b CScriptProvider::AccessProperties(IScriptRequestData*, IScript*) + 571
4 com.adobe.InDesign.Scripting 0x1f4befe8 GetPlugIn + 166440
5 com.adobe.InDesign.Scripting 0x1f4c2e31 GetPlugIn + 182385
6 com.adobe.InDesign.INXCore 0x20641444 GetPlugIn + 45220
7 PublicLib.dylib 0x0142c9e8 CScriptDOMElement::GetMultipleAttributes(K2Vector<IDType<ScriptID_tag>, K2Allocator<IDType<ScriptID_tag> > > const&, adobe::version_1::vector<KeyValuePair<IDType<ScriptID_tag>, DOMAttributeValue>, adobe::version_1::capture_allocator<KeyValuePair<IDType<ScriptID_tag>, DOMAttributeValue> > >&) + 280
8 PublicLib.dylib 0x0142bd38 CScriptDOMElement::InsertProperties(adobe::version_1::vector<KeyValuePair<IDType<ScriptID _tag>, ScriptData>, adobe::version_1::capture_allocator<KeyValuePair<IDType<ScriptID_tag>, ScriptData> > >&, adobe::version_1::vector<KeyValuePair<IDType<ScriptID_tag>, DOMAttributeValue>, adobe::version_1::capture_allocator<KeyValuePair<IDType<ScriptID_tag>, DOMAttributeValue> > > const&, short, short) + 1336
9 PublicLib.dylib 0x0142beab CScriptDOMElement::SetSimpleAttributes(adobe::version_1::vector<KeyValuePair<IDType<Scrip tID_tag>, DOMAttributeValue>, adobe::version_1::capture_allocator<KeyValuePair<IDType<ScriptID_tag>, DOMAttributeValue> > > const&, short) + 91
10 PublicLib.dylib 0x0142c0d3 CScriptDOMElement::SetAttributes(adobe::version_1::vector<KeyValuePair<IDType<ScriptID_ta g>, DOMAttributeValue>, adobe::version_1::capture_allocator<KeyValuePair<IDType<ScriptID_tag>, DOMAttributeValue> > > const&) + 51
11 PublicLib.dylib 0x0142a2ea CScriptDOMElement::SetAttribute(IDType<ScriptID_tag>, DOMAttributeValue const&) + 202
2) That works. Moved all pages (frame threading was preserved) to a new doc, exported to IDML, opened new IDML file just fine. Woo hoo! One of my editors won't be pleased that all of the tracked changes have disappeared, but at least the file functions now
Wish I knew what caused the problem in the first place so we could (hopefully) prevent this from happening again. Any ideas?
Thanks again for your help!
Cheers,
Andrea -
Problem with printing txt file
I have a problem with printing txt file. My code looks like :
String filename = something.txt";
DocFlavor flavor = DocFlavor.INPUT_STREAM.AUTOSENSE;
PrintService[] services = PrintServiceLookup.lookupPrintServices(
flavor, null);
PrintRequestAttributeSet pras = new HashPrintRequestAttributeSet();
pras.add(PrintQuality.DRAFT);
pras.add(new Copies(1));
pras.add(MediaSizeName.ISO_A4);
pras.add(Sides.ONE_SIDED);
pras.add(Chromaticity.MONOCHROME);
PrintService service = ServiceUI.printDialog(null, 200, 200,
services, services[0],
null,
pras);
if (service != null)
try
DocPrintJob job = service.createPrintJob();
FileInputStream fis = new FileInputStream(filename);
DocAttributeSet das = new HashDocAttributeSet();
Doc doc = new SimpleDoc(fis, flavor, das);
job.print(doc, pras);
Thread.sleep(10000);
catch(FileNotFoundException e)
catch(PrintException e1)
catch(InterruptedException e2)
It doesn't work :(
What is my purpose: I would like to print .txt file but I would like to get PrintDialog where I can choose PrintQuality, Chromaticity etc. I found also that I should use DocFlavor.INPUT_STREAM.TEXT_PLAIN_HOST but I don't know how.
I will be very gratefull for help :)I tested it on 3 printers (different models of hp). 2 of them don't give me any error but when it started print priter stoped (just as it dosesn't have a paper), but 1 of them doesn't react (there were no errors), i thought tahat something was wrong with printers but when I change DocFlavor.INPUT_STREAM.AUTOSENSE to DocFlavor.GIF and filename to dog.gif it works so mybe there is another way to print txt file
-
I need help with uploading photos from iPhoto to facebook. I could do it till 2 days ago. Now any new photo I try to upload gives me an error message:
Bad Image
There was a problem with the image file.
Please help.Can you drag it to the Desktop?
-
Problems with reading XML files with ISO-8859-1 encoding
Hi!
I try to read a RSS file. The script below works with XML files with UTF-8 encoding but not ISO-8859-1. How to fix so it work with booth?
Here's the code:
import java.io.File;
import javax.xml.parsers.*;
import org.w3c.dom.*;
import java.net.*;
* @author gustav
public class RSSDocument {
/** Creates a new instance of RSSDocument */
public RSSDocument(String inurl) {
String url = new String(inurl);
try{
DocumentBuilder builder = DocumentBuilderFactory.newInstance().newDocumentBuilder();
Document doc = builder.parse(url);
NodeList nodes = doc.getElementsByTagName("item");
for (int i = 0; i < nodes.getLength(); i++) {
Element element = (Element) nodes.item(i);
NodeList title = element.getElementsByTagName("title");
Element line = (Element) title.item(0);
System.out.println("Title: " + getCharacterDataFromElement(line));
NodeList des = element.getElementsByTagName("description");
line = (Element) des.item(0);
System.out.println("Des: " + getCharacterDataFromElement(line));
} catch (Exception e) {
e.printStackTrace();
public String getCharacterDataFromElement(Element e) {
Node child = e.getFirstChild();
if (child instanceof CharacterData) {
CharacterData cd = (CharacterData) child;
return cd.getData();
return "?";
}And here's the error message:
org.xml.sax.SAXParseException: Teckenkonverteringsfel: "Malformed UTF-8 char -- is an XML encoding declaration missing?" (radnumret kan vara f�r l�gt).
at org.apache.crimson.parser.InputEntity.fatal(InputEntity.java:1100)
at org.apache.crimson.parser.InputEntity.fillbuf(InputEntity.java:1072)
at org.apache.crimson.parser.InputEntity.isXmlDeclOrTextDeclPrefix(InputEntity.java:914)
at org.apache.crimson.parser.Parser2.maybeXmlDecl(Parser2.java:1183)
at org.apache.crimson.parser.Parser2.parseInternal(Parser2.java:653)
at org.apache.crimson.parser.Parser2.parse(Parser2.java:337)
at org.apache.crimson.parser.XMLReaderImpl.parse(XMLReaderImpl.java:448)
at org.apache.crimson.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:185)
at javax.xml.parsers.DocumentBuilder.parse(DocumentBuilder.java:124)
at getrss.RSSDocument.<init>(RSSDocument.java:25)
at getrss.Main.main(Main.java:25)I read files from the web, but there is a XML tag
with the encoding attribute in the RSS file.If you are quite sure that you have an encoding attribute set to ISO-8859-1 then I expect that your RSS file has non-ISO-8859-1 character though I thought all bytes -128 to 127 were valid ISO-8859-1 characters!
Many years ago I had a problem with an XML file with invalid characters. I wrote a simple filter (using FilterInputStream) that made sure that all the byes it processed were ASCII. My problem turned out to be characters with value zero which the Microsoft XML parser failed to process. It put the parser in an infinite loop!
In the filter, as each byte is read you could write out the Hex value. That way you should be able to find the offending character(s). -
please help problem with importing a file error output "there was an error decompressing audio or video"
this is related to what adobe program/version?
Maybe you are looking for
-
I have the older airport extreme and 2 2nd gen airport expresses in a large house. Lately I have been getting complaints about internet "drop out" and weak signal (orange signal - weak network) in one (oddly enough the nearest one to my extreme).
-
Hello All, My requirement is to create an ARIBA PO thru BAPI_PO_CREATE1. IN order to successfully process an ARIBA PO, i need to check the gl account and cost center used. If the first two letter of the cost center is equal to 'BS', then I need to is
-
Foreign currency conversion is wrong in line item report
Hi All, I have a system which went live recently as of 1st of Sept. 2011. Hence my cut off is 31st Aug.2011. Now, i have uploaded customer open line items in foreign currency. Hence, at cutover my exchange rate was as per month of Aug. Now when I wan
-
How to align text paragraphs with caption text boxes
Hello, Im moving from QuarkXpress to InDesign, and Im setting up styles, templates, libraries, etc... The issue Im having is that when I add an image with a text caption box in one of the columns, the text that wraps around the caption text box, no l
-
[Solved] How does Clementine Jamendo plugin work?
I fear this might be a silly question, but anyway, how should I use the Clementine Jamendo plugin? When I click on the plugin in the "Internet" tab a pop up shows up asking to download a database of approx 150MB. After clicking "Yes" the download tak