Problems with PHCS6 extended - lighting effects (filters)

What can I do to fix my lighting effects? It blocks the entire program Photoshop CS6 at that moment I click on it.
I've tried reinstalling the software with no results
. I would appreciate any help
Message was edited by: mclarice

Hi, mjarrott
My system is Windows 7. (GB Ram 8.00 on a Dell Optplex 980) And Photoshop is my newly purchased in Portuguese, because I'm Brazilian. The problem appears when I try to use the Filters menu - finishes - lighting effects.
My old version worked just fine ...
De: mjarrott [email protected]
Enviada em: quinta-feira, 8 de novembro de 2012 16:16
Para: mclarice
Assunto: Problems with PHCS6 extended - lighting effects (filters)
Re: Problems with PHCS6 extended - lighting effects (filters)
created by mjarrott <http://forums.adobe.com/people/mjarrott>  in Photoshop for Beginners - View the full discussion <http://forums.adobe.com/message/4833406#4833406

Similar Messages

  • Does anyone have problems with the led light ?

    Does anyone have problems with the led light ?

    LOTS of people reporting a range of similar issues.
    https://discussions.apple.com/thread/6648856
    https://discussions.apple.com/thread/6574287

  • Font problems with Gill Sans Light in Dreamweaver

    The following site: www.cabrackett.com/testSite has a very small testing html page illustrating a problem I have been having with Gill Sans Light.
    In Dreamweaver CS4 Design View, Gill Sans Light displays properly. When viewed in a browser (Firefox 3.5.3) or in Live View, a generic serifed font shows up. Assuming that the only reason for this could be improper installation of the Gill Sans Light font, I opened MS Word and the Gill Sans Light font works perfectly.
    Also, when Gill Sans Bold is used, instead of light, the font does show up properly in all cases: Design View, Live View, and Firefox.
    Any ideas what is going on? If the Light font were corrupted then how could it work in MS Word?
    Thanks,
    Chuck
    MacPro, OSX 10.5.8, Dreamweaver CS4, Firefox 3.5.3

    As Joe says, Gill Sans Light isn't "web-safe" because browsers rely on the font being present on the user's computer. I don't have Gill Sans Light on my computer, but I do have Gill Sans MT. As soon as I changed your CSS to Gill Sans MT, it worked.
    Because fonts are dependent on what is available on the user's computer, you should always specify several fonts in order of preference, and end with a generic font (serif, sans-serif, monospace, cursive, or fantasy). For example:
    body {
      font-family:"Gill Sans Light", "Gill Sans MT", Tahoma, Geneva, sans-serif;
    The first one available on the user's computer will be displayed. If none is available, a generic sans-serif font will be used instead.

  • Problems with importing to After Effects

    Hi,
    I can't get my Motion projects imported into After Effects. I have read the manual and done exactly as instructed. When i try to import my Motion project file into AE, I get an error message in AE saying: "files of type "mofo" are not supported. I have no idea where the "mofo" comes from, since the projects are .motn format.
    I was wondering if anybody else has same kind of problems, with Motion and AE?
    The Motion version I am using is 3.0.2 and After Effects is the CS3 version.

    Yes this is a known problem and has been discussed a few times on this forum. It only started being the case with CS3 unfortunately. The only work around is to rename the Motion Project with a .mov on the end of the name, and import to After Effects. This works but means that the very handy feature of 'edit original' stops working, and i've also noticed a number of instabilities (crashes etc) introduced as a result.
    We have to hope they'll (apple and adobe) fix this in a future update.

  • Problems with sonic extender application, Problems with sonic extender application, Problems with sonic extender application

    I installed Sonic Extender and at first had no problem with it.  Then I connected with a different internet connection and now it will not connect.  What is the easiest way to get technical support help.  I called and also submitted a request for someone to call me.  I had no luck or help with either.

    Hi Alex,
    I tried the process you described on my machine using LabVIEW 7.1 and could not reproduce the behavior.  If you can clarify the version you were using that will be helpful. I will have to clean a test machine and try it again without LabVIEW installed, and get back with you if the problem appears.  In the meanwhile, I found the following KB which, while not referring to the exact same problem you are describing, does address the evaluation message issue.  You can try to follow the steps at the end of the KB, and let me know if that worked.
    http://digital.ni.com/public.nsf/websearch/1E1FB3C19E8E0A9986256F8D0077D0E6?OpenDocument
    Regards,
    Aluma G.
    National Instruments

  • Audio Problems with Fast/Slow/Reverse Effect in iMovie HD

    I have been having problems with the Fast/Slow/Reverse effect in iMovie HD with my movie clips. Whenever I apply the effect (reversing at the same playback speed, not sped up or slowed down), when it is finished rendering the audio is choppy, yet on time (but still backwards, as wanted). Before applying the effect, the preview of it works flawlessly, it is only when it is applied that the audio gets choppy. Extracting the audio will not help either because the video will still be playing backwards while the audio will be playing normally (since it can't be reversed on its own). I have tried other effects on the same clips that don't effect the audio and they work perfectly. Any suggestions? I'd really appreciate your help! Thanks.
    Macintosh Powerbook G4   Mac OS X (10.4.6)   iLife '05 : iMovie HD

    Have you got an isolated hard drive with ALL of the required applications and other resources together with the operating system ? Using an external HD to SAVE a running iMovie project is asking for problems. Back up the Project on another HD sure, but don't use System on one HD, running files on another.
    Hope Helps,
    Ernie Lee

  • Problem with a display lighting

    Problem with a display lightring. What is it and how can I solve it?
    Thanks!
    Mikhail

    suppose the table is itab with columns A and B,
    so ur data is like wa-A and wa-B.
    now use a table node to loop at itab into wa.
    now create two rows with line type having single column.
    loop
    ROW1 -
    print wa-A
    ROW2
    print wa-B.
    endloop.
    this way u'll get ur data vertically

  • Problem with ALV filter functionality when filtered for multiple values

    Hi,
    I am facing a problem with ALV filter functionality.
    I have displayed an ALV with some columns col_A, col_B and col_C
    col_A---- col_B -
    col_C
    1----
    a -
    abc
    2----
    b -
    pqr
    3----
    c -
    lmn
    4----
    d -
    xyz
    5----
    f -
    stu
    From the settings link I am applying filter on column col_C and selected multiple values say 'pqr', 'xyz' and 'lmn'.
    Now the ALV is showing rows only for last selection i.e . results are fetched only for value 'lmn'.
    i.e. after applying the filter the ALV table looks as below:
    col_A---- col_B -
    col_C
    3----
    c -
    lmn
    But ideally it should be:
    col_A---- col_B -
    col_C
    2----
    b -
    pqr
    3----
    c -
    lmn
    4----
    d -
    xyz
    I could not find any OSS note related to this issue.
    Please help me resolve this issue.
    Thanks,
    Feroz

    Hi,
    I am facing a problem with ALV filter functionality.
    I have displayed an ALV with some columns col_A, col_B and col_C
    col_A---- col_B -
    col_C
    1----
    a -
    abc
    2----
    b -
    pqr
    3----
    c -
    lmn
    4----
    d -
    xyz
    5----
    f -
    stu
    From the settings link I am applying filter on column col_C and selected multiple values say 'pqr', 'xyz' and 'lmn'.
    Now the ALV is showing rows only for last selection i.e . results are fetched only for value 'lmn'.
    i.e. after applying the filter the ALV table looks as below:
    col_A---- col_B -
    col_C
    3----
    c -
    lmn
    But ideally it should be:
    col_A---- col_B -
    col_C
    2----
    b -
    pqr
    3----
    c -
    lmn
    4----
    d -
    xyz
    I could not find any OSS note related to this issue.
    Please help me resolve this issue.
    Thanks,
    Feroz

  • Disappearing Icons/Controls in Blur Gallery and Lighting Effects Filters

    About a month ago (after I downloaded Photoshop 2014 but BEFORE the most recent update); I found that the adjustable tack icon (in Field Blur) and the light icons (in Lighting Effects) have disappeared.  I can still adjust their controls but they don't appear on the screen so I'm not sure where exactly they are and thus can't move them.  Anyone else had this issue?  This has persisted after the most recent update.

    Could you please post a screenshot to illustrate the issue?
    What are the Performance Preferences?
    What have you done for general trouble-shooting so far (restoring Preferences after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved might be of special interest)?
    http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
    Edit: Have you tried changing the GPU "Advanced Settings" (and restarting Photoshop, otherwise that won’t take effect)?

  • Problems with anamorphic in after effects...HELP!

    I've just been given the job of designing a title sequence.The problem is that it's been shot in anamorphic.My question is how do I design a title sequence when I have been given the footage in anamorphic which I have to stretch out to fit the 1920x1080 project composition settings,design the titles and then pop it back to fit the original format for export?All my design work will go to waste as the final sequence will consist of bunched up text and obviously look terrible.There MUST be a simple answer to this problem....

    There MUST be a simple answer to this problem....
    There is a simple answer indeed.
    Here it is:
    The highlighted button in the Comp panel enables Pixel Aspect Ratio (PAR) Correction.
    So, instead of stretching the footage horizontally, you create a Composition with the same frame aspect and Pixel Aspect Ratio as your source footage (just drag the clip to the New Comp button in the project panel and AE will automate this) and then enable PAR correction and After Effects will give you a corrected (deanamorphized) preview so you won't see it squeezed at all on a computer monitor. When you export it, it will look squeezed until you take it to the target video application. Any professional video application will handle this correctly.Millions of people do this every day, since non-square pixels are still dominant among the most popular video formats.
    Even Photoshop has had support for non-square pixels (and PAR correction in the document panel) since CS (ie. Photoshop 8.0).
    Note that when you turn on PAR correction (just like when you use odd magnification levels) AE switches to a draft filtering mode, which makes type and other elements look a bit jagged. Don't worry, it's just a preview.
    The ideal solution, and the one video professionals rely on, is adding video output hardware to your computer, so you can connect a professional video monitor. After Effects can provide a live preview using such a set-up.
    For more information on PAR, see Pixel aspect ratio and frame aspect ratio in After Effects Help.

  • Some problems with my imac + after effects

    Hi everybody! Fisrst of all, sorry for my english, i've just started to study seriously...
    My problem is: I have an iMac with a few years on its back. Here the specs:
         - iMac
         - Intel Core 2 Duo
         - 2,8 GHz
         -  1 (Processor)
         - Core number: 2
         - Cache Level 2 6Mb
         - Memory 4 Gb
         - Bus speed: 1,07
    I'm trying to use after effects in order to make a simple 2' video. And the computer became slower than my turtles...
    Any idea or any advice? maybe just add some extra memory? or just a new computer?... Any help will be greatfull!
    ThanK you all!

    Mac requirements are v10.7.4 or later >  Adobe After Effects CC for Mac tech specs
    If your Mac is running v10.6 as noted in your profile, you need to upgrade at the least to v10.7 Lion to run After Effects.

  • Problems with photoshop elements 11 - effects won´t load

    I have problems: when I want to use effects, the stiles and effects on the sidebar won´t load. I ve reinstalled photoshop three times now, it works a day or two and than the same problem occurs. (I ve bought the program for download on amazon). Has anybody an idea, whats wrong? (I´m german, sorry for my english)
    Thank you
    Message was edited by: c.furtmann

    You need camera raw 8.4 for your camera, if it’s Digital Rebel T5 EOS 1200D EOS Kiss X70. It is not compatible with PSE11; so it’s a bit odd if that software was bundled with the camera except that it will work with jpegs. I suggest you download and install the free Adobe DNG converter to convert your CR2 files to the Adobe universal Raw format and the DNG files will editable in PSE11(keep your originals as backups and for use in the camera manufactures software)
    Mac download (.dmg file) click here DNG Converter 8.4
    You can convert a whole folder of raw images in one click. See this quick video tutorial:
    You Tube click here for DNG Converter tutorial

  • Start-up problem with my Macbook - light stays on and screen stays black?!

    Hi, sometimes when I start up my Macbook the switch-on light stays on and the screen stays black. Then I have to turn it off and when I restart it boots normally. What can this be? I resetted already the PRAM and the firmware is up to date. Perhaps someone understands german. Therefore I added my german post... Many thanks in advance!
    Hi, hab ein seltsames Phänomen. Manchmal, vor allem nach ausgeschaltetem Zustand über Nacht, leuchtet nach dem Einschalten das Einschaltlicht auf und geht nicht wieder aus, wie normal wenn das Macbook startet, sondern bleibt an und der Bildschirm bleibt schwarz. Dann schalte ich das Macbook mit dem Ausschaltknof aus und warte ein paar Sekunden und schalte es dann wieder ein. Daraufhin startet es ganz normal. Woran könnte das liegen? Hab schonmal PRAM resettet und die Rechte auch repariert. Der Hardwaretest zeigt auch keine Probleme an. Kann man(n) noch irgendwie überprüfen, woran das liegen könnte oder hat das Problem auch schonmal jemand gehabt? Mein Macbook ist gradmal 2 Monate alt und hat das Problem erst seit kurzem. Könnte das vielleicht auch an einer Software liegen, die ich installiert habe. Kann sowas auch Auswirkungen auf den Bootvorgang haben? Bin Laie und würde gern wissen, ob sowas auch an der Pufferbatterie oder einer kalten Lötstelle liegen kann oder könnte das Macbook da dann gar nicht starten. Wäre für jeden Vorschlag dankbar... Vielen Dank schonmal im voraus!

    Hi,
    put me on the list as well. I was already in contact with ADC and it seems to me that they acknowledged it as a bug. I'm using a Mini-DVI-to-VGA adapter. And sporadically when unplugging it the internal display stays black or switches to the blue background and hangs there.
    As I heard from friends who are using the Mini-DVI-to-DVI adapter in the same use case, this doesn't happen to them.
    MB (CD 2 GHz), PB G4 15" (1.67 GHz), Mac Mini (1.66 GHz Core Duo)   Mac OS X (10.4.8)   iPod color 60 GB, iPod 1G nano 4 GB, iPod 1G shuffle 1 GB

  • Problem with applying Spry "Slide Effect"

    I am having problems attaching the  slide effect on image. Below is the code for the test page I am working  on to learn how to use this effect (most of which came from Adobe):
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
    <title>Untitled Document</title>
    <script type="text/javascript" src="../SpryAssets/SpryEffects.js"></script>
    </head>
    <body>
    <p> </p>
    <p> </p>
    <style type="text/css">
    #content{ visibility: hidden;}
    </style>
    <div id="content">
      Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Fusce vel sem nec massa cursus
      interdum. Class aptent taciti sociosqu ad litora torquent per conubia nostra, per inceptos
      hymenaeos. Duis euismod eros consequat nibh. Pellentesque non purus. Nam lectus magna, faucibus
      vel, aliquet id, commodo vitae, elit. Maecenas sollicitudin, nibh iaculis bibendum consequat,
      odio erat volutpat ipsum, sed dignissim ligula mi in justo. Nam placerat. Nullam fringilla
      tortor. Quisque lacinia, mi non iaculis adipiscing, turpis lacus eleifend velit, dictum
      facilisis pede diam sagittis nulla. Nunc vestibulum elementum enim. Etiam lorem felis, faucibus
      sit amet, vulputate sed, lobortis et, nunc. Morbi vitae lectus.
    </div>
    <p> </p>
    <p> </p>
    <div id="chakra">
    <p><img src="../images/chakra_yantra_200px.jpg" alt="chakra" width="200" height="201" /></p>
    </div>
    </body>
    </html>
    The  idea is that there is an image called "chakra", and when the mouse goes  over the image then the text is suposed to slide out as a caption.
    When I attempt to attach the effect after selecting the image I am asked to ***Select Target Element ID*** of which there are two options
    div "content"
    and
    div "chakra"
    I choose -- div "content"
    I then get an error message that says:
    “To  get this behavior to work properly, you must select the container tag  you want to slide. (For example, if you want to slide an <image>  tag that is wrapped with the <div> tag, select the container  <div> tag. The container tag must have a unique ID.)
    Please  select a container tag as your target element , or cancel the behavior,  wrap your target element with a div tag, assign the new div tag a  unique ID, and reapply the behavior. When you reapply the behavior,  select the new div tag as your target element.
    The action will not be added to your document.”
    What am I doing wrong?
    I  have spent hours on this but not getting anywhere. Are there any good  visual tutorials to explain this? I have read everything that Adobe has  provided but I am still not getting it, but I am getting a head ache.  )-:
    I'm using DW CS5 on a Mac, OS X 10.6.6

    Add a div element as follows
    <div id="content">
    <div>Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Fusce vel sem nec massa cursus
      interdum. Class aptent taciti sociosqu ad litora torquent per conubia nostra, per inceptos
      hymenaeos. Duis euismod eros consequat nibh. Pellentesque non purus. Nam lectus magna, faucibus
      vel, aliquet id, commodo vitae, elit. Maecenas sollicitudin, nibh iaculis bibendum consequat,
      odio erat volutpat ipsum, sed dignissim ligula mi in justo. Nam placerat. Nullam fringilla
      tortor. Quisque lacinia, mi non iaculis adipiscing, turpis lacus eleifend velit, dictum
      facilisis pede diam sagittis nulla. Nunc vestibulum elementum enim. Etiam lorem felis, faucibus
      sit amet, vulputate sed, lobortis et, nunc. Morbi vitae lectus.</div>
    </div>
    Gramps

  • Sound problem with exporting from After Effects

    Hello everybody,
    I exported a windows media video from premiere cs5 (it was shot with the cannon 7d).
    The video has 1 video channel, 1 audio channel that contains a conversation, and another audio channel that contains only music.
    After I exported it, I imported the video into After Effects cs5, I added some effects, and then I exported it as a windows media video.
    The audio settings were:
    Mode- music
    codec- windows meida audio voice 9
    audio format- 20kbps, 22.05 khz, mono
    Even though the video from Premiere was flawless, the one from After Effects contains the conversation perfectly, but the music is very low and even erratic.
    Did anybody experienced this problem?

    AE doesn't deal with multiple channels. It always assumes that a file with 2 channels is stereo. You need to export the audio from Premiere separately or create a proper stereo mix, not throw two interleaved mono channels at AE...
    Mylenium

Maybe you are looking for