Problems with playback/buffering effecting downloads

Problem seems to be the videos on sites like YouTube where the video buffers as it's playing, then it keeps stopping where the player stops and I have to manually move the video position back a bit before it will continue to buffer. And it seems to be a problem with the video downloaders like Freemake and Realplayer where because of this, during the video downloads, the download will quit and not finish. How can I fix this?

Try AntVideoDownloader (for Firefox - it doesn't work with IE) It downloads MUCH FASTER than anything else I've used, and you can keep watching while you download.

Similar Messages

  • Problem with DeNoiser audio effect

    I hava a problem with DeNoiser audio effect. When I apply it to a clip, it starts to work after a few seconds: it produces noisy audio on the beginning of each clip, but clean at the end. It appears both when I watch playback in Premiere (with MPE GPU acceleration enabled on GTX 460), and in final rendered movie.
    How can I resolve this problem? Or maybe Premiere has got other effects that function similar to DeNoiser and work fine?
    I'm using Premiere Pro CS6 Trial (updated version 6.0.1, I have also updated Media Encoder to version 6.0.1). I work with footage from Canon 600D DSLR (1080p24, mov, H.264, PCM audio). My operating system is Windows 7 Ultimate 64-bit (with SP1, problem appears also on Windows without SP). I have no third-party plugins instaled.

    How can I resolve this problem?
    Don't use that effect.  Instead do this kind of thing in Audition.

  • Problem with Playback device on windows 10

    Just today i downloaded the new Windows 10 update and i like it for the most part. But i went on skype today for a video chat and a pop up came up saying that i have a problem with playback device and i cannot video or voice call. skype worked fine yesterday on windows 8, need solutions ASAP.

    Do minimize the chances of having issues with other audio/video devices: 1.  Uninstall Cyberlink Webcam Splitter.  It my not work properly in Windows 10.2.  Disable Stereo Mix. You can also download and install the latest Realtek Driver suite even if you have the latest/same drivers installed.  The suite can resolve issues. Download and install the latest generic Realtek audio drivers (High Definition Audio Codecs - 64bit Windows 10)http://www.realtek.com/downloads/ I've outlined most of the causes and solutions here:http://community.skype.com/t5/Windows-desktop-client/Problem-With-Playback-device/m-p/3356467/highlight/true#M282763 

  • I am having a problem with playback in Final Cut 6.0.6

    Hello,
    I am having a problem with playback in Final Cut 6.0.6 of 1920x1080 60p footage.
    I transcoded MTS files shot on a Sony NEX FS100 into Apple Pro Res mov files but the
    playback stutters in Final Cut and QTime making it impossible to edit. Is this because the files
    are just so big the computer is having a problem processing them? If so what should I edit in to preserve the
    best quality?
    I am Running Mac OSX 10.6.8
    2x2.4 Ghz Quad Core Intel
    32 GB 1066 MHz DDR3
    Admittedly my FCUT is out of date, I intend to up to X when I finish off an ongoing project.
    Thanks Luci

    You might consider running diskwarrior on your drive (alsoft.com).  And run diskutility, repair disk.  A corruption of the drive could cause problems.  Also, drive speed starts to fall sharply as the drive gets full.  Make sure you have a minimum of 10% free space on the drive.  You might also get a utility to check the speed of the drive.  I think Aja has one.
    Also, do you have anything else connected to the firewire bus?  If so, try disconnecting it.  You might also try disconnecting ethernet and turning off your airport.  Resetting your fcp preferences couldn't hurt.
    https://discussions.apple.com/docs/DOC-2491

  • Having a problem with itunes. Just downloaded the lastest itunes update. However, it won't open because it keeps trying to download to a driver (k:) which I don't have. Since my phone iOS is updated and can't connect to itunes anymore. How do I fix this?

    Having a problem with itunes update. Download wants to update to a driver (k:) which my computer doesn't have. As a result the download does not go through.

    Try the following user tip:
    "Invalid drive X:\" install errors

  • HT4539 I'm having problems with my iPad I downloaded I downloaded pro for two dollars and now when I try to download other apps in the app store it wAnts to kno my personal card info on free items and won't let me download items I already erase the I down

    I'm having problems with my iPad I downloaded I downloaded pro for two dollars and now when I try to download other apps in the app store it wAnts to kno my personal card info on free items and won't let me download items I already erase the I downloadeder pro but I don't kno way to do?

    Also, when I go on to safari, another alert pops up that safari cannot verify the identity of the website, anything that I type in to as common as google.com. It gives me 3 options to either cancel, look at details, and continue. I've looked at the details of the website of Google and it is legitimate the site. Any help?

  • Has anyone had a problem with CS3 crashing after downloading OS 10.8.1 on a imac?

    Has anyone had a problem with CS3 crashing after downloading OS 10.8.1 on a imac? 

    Peggy
    You are probably correct. I tried all different variations to test it. As long as I quit each document separately, i.e., red dot it, I seem to bring up only one document after that whether I click on the document itself or open it within pages. The same is true with numbers.
    Two more questions:
    1) can you turn off the "resume" feature? If so, how? I could not find a way to do it.
    2) why the "save a version" feature in pages? What happened to the old "save" and "save as" features?
    Thanks so much, you saved me a lot of frustration but I am still going to install MS Office for Mac.
    Daveben

  • Problem with the Blind effect.

    Hi, i have a problem with the Blind effect.
    I added multiple Image  bars vertically together. With a click on a bar, some text slides out.  With another click on the bar you can slide the text back in. So far so  good.
    Now, always when i click to open or close a window, the  site jumps to a certain point, but i can't exactly figure out where  it's jumping to. 
    Is there an order to fix the position of the bars, so that they don't move, even if I open or close the bars?
    The problem does not appear when im at the bottom of the website.
    thx for your help.

    I figured out the problem I was having with my zoom effect.
    It worked when I added a specific number for height and width.
    Before I had a percent. Try adding a height and width number, it
    worked for me.

  • HT204152 hello i have a problem with app store cant download program get this error verification required and no accept my visa card

    hello i have a problem with app store cant download program get this error verification required and no accept my visa card

    what i can start to download and updated programs

  • How do I resolve a problem with the Pompiere font download?

    How do I resolve a problem with the Pompiere font download for Word on a MacPro?

    never mind... download must have been corrupt. re-downloading it seems to have fixed the problem.

  • Problem with playback device message..

    problem with playback device message.. been reading up about this problem but so far nothing has worked for me.. i have windows 7. Been trying to find the place in here to get some help but have no idea how this works. So if someone reads this.. please HELP me. Cheers

    What OS are you running?  What's the model of your computer/audio device?  What does Skype list as your playback/recording device?

  • Windows 10 updated - Skype problem with playback device

    Hi, please advice on how to correct the error with Skype - problem with playback device.I have updated all drivers

    Please, run the DirectX diagnostics tool (32-bit). Run dxdiag.exe (Start - Run or Win key +R) then press enter or click "OK". Once the diagnostics completes, "Save All information..." to a text file. Please, attach this file to your post. Be aware that you will have to zip this file before attaching it here.
    (i.e. compress DxDiag.txt ---> DxDiag.zip) 

  • Solutions to "Problem with playback/recording devi...

    I've only had a few microphone/audio problems with a friend on Skype not being able to hear me or vice versa, nothing that couldn't be fixed. Usually the call would at least pick up even if there was no sound going through. But just out of the blue two days ago (Monday, May 4th), when my friend tried to call me, the call dropped without any explanation. I tried also to call, but then every time, it wouldn't even last long enough to ring and it would just drop. It kept having a notification saying "Problem with playback device" or "Problem with recording device". I've tried signing out of Skype, restarting my computer, checking all monitor audio levels, etc... I always keep my Skype up to date, but I checked again for any new in case that would allow the call to go through, but it didn't, even after I updated it to the lastest version 7.4.0.102. I tried calling Skype Testing Service a million times, but still the call won't even stay on long enough for me to read what it says under the microphone and speaker box after clicking on the connection icon; all I have time to see is "can't access sound card". The thing is, I can hear the millisecond of ringing tone, the sound it makes when the call drops, and all other sound Skype makes, so it's not a question of all sounds being on mute, but for some reason it says I have a problem with playback and recording device! Why is that?? I already searched here in the community Q&As for possible solutions to fixing the problem, but double-checking the audio settings under Tools > Options has not changed anything unfortunately. PLEASE HELP!!!

    I've never seen that message.  What exactly did it say?  You're using the native media from the T3i, it hasn't been converted, it's never been inside of Final Cut Pro?

  • Has anyone out there experienced problems with launching apps after downloading the iOS 5.1?

    Has anyone out there experienced problems with launching apps after downloading the iOS 5.1?

    I tried calling support and they want to sell me $79 worth of support in order to get it straightened out!

  • I'm having problems with the free trial download

    I'm having problems with the free trial download

    I have IE11.
    After the trial Photoshop CC download runs, it asks me to sign in.  When I
    sign in, I get the message "You've been signed out."

Maybe you are looking for

  • Where can I get a new hard drive for an LC II (80MB)

    I have a complete Macintosh LC II that saw most of the family through University (and me retraining as a dentist). The hard drive is an IBM HDD 80MB 3.5" WDS-L80 - does anyone know anyone still selling these/ can I use a substitute. Would like to kee

  • How to automate the payment program proposal creation

    Hi Experts, Another question, as we have to automate the creation of the payment run and its proposal run and then the list should go to specified person, who will check and then the payment run will be executed manually in the system. How to automat

  • Using leopard as alarm with internet radio?

    It would be really great if I could use the Mac I'm about to get as an alarm - waking up to radio4. Would that be doable? I know you can set the OS to fire up at a certain time, but can you have it automatically play a stream online without having to

  • My Apple Store Experience

    Dear Apple and the Support Forum, I am appalled by my recent experience with my Macbook Pro. I have been an avid apple customer for many years now, where my family and I have purchased 2 top of the line Macbook Pros, countless iPods, and countless Ap

  • Configure single CSS as authoritative dns server

    Hi Experts, I have one CSS11501 acting as the load balancer. And all the servers are in private network behind it. We need to configure an authoritative dns server for this web domain. I want to use this CSS to be the dns server. I saw that there are