Problems with playback when burning to DVD or saving as MPEG

My movie looks fine when viewed through Adobe Premiere Elements 9 but then when I burn it to DVD or save as an MPEG the footage appears jumpy. I have tried deinterlacing and this improves it but doesn't fix it. Any suggestions on what I can do to help with this.

Now2011
Is the jumpy uniform or mostly at point of major motion in the content?
Have you tried applying just Field Options/Reverse Field Dominance? If so, any better, worse, same as if you had just selected Always Deinterlace?
1. Is you source media interlaced or progressive video? If interlaced, is Fields = Upper Field First or Lower Field First?
2. When you save an "MPEG" file, what are you setting for Field Order (See Advanced Button/Video Tab)?
Note DVD-VIDEO on DVD disc is standardized as interlaced with Field Order = Lower Field First.
3. Is jumpy = flicker, double looking images, or just plain jumpy?
ATR

Similar Messages

Problem with iPhoto files burned to DVD

I just installed my iLife '06. I want to back up my digital photos on DVD's. I've tried both DVD-R and DVD+R to burn to. They burn through completion stating when finished, that the DVD was burned successfully. When I re-insert back into the CD player, no disk image appears, and the CD player doesn't engage whatsoever. After 30seconds. it's ejected.
My intention is strictly to back up the photo and related data files. I'ld like to actually eventually delete them altogether from iPhoto, to free up some space...once I know I've got it all on a disk.
It plays commercially purchased DVD's just fine, as well as Burned CD's.
My profiler shows I have a Pioneer DVD-RW DVD-1060
DVD-Write -R, -RW +R, +RW.
How do I determine what is really wrong, and correct it?
(I originally posted this in a different forum and it was suggested that this forum would be more appropriate for my question. Sorry for the redundancy)
Message was edited by: don.kilometro

As of yet, no.
I just attempted to burn a DVD using a DVD-R. I selected a goup of photos from iPhoto and drug them to a burnfolder on my desktop. I selected: file>burndisk.
After the "burn" was completed, the DVD disk image with the burnfolder title was still on the desktop. I ejected it and then re-loaded it. Again, there was no response from the CD drive (no sound or movement), no disk image appeared on the desktop, and no disk image appeared on the Disk Utilities window which I had kept open to monitor it. After 30 seconds the disk drawer opened on its own.
Considering how inexpensive a new and upgraded optical drive is, maybe I should just replace it, though I would still like to discover what the cause this current problem is, regardless.

Problems with playback quality of animated DVD on television

I'm sending a ~20 minute (uncompressed, millions of colors) animation in QuickTime out of Final Cut Express HD in a format of HD-1080i and trying to get a very high resolution DVD for television (HD TV). Before taking the QuickTime video to any DVD writing software the aspect ratio (16:9) is correct and resolution is immaculate.
However, all my efforts to get a super-high resolution DVD of this animation, whether I go through iMovie or only to iDVD have gotten me a lot of written and wasted DVDs in my tests. The resolution is very poor.
QUESTION:
How do I get a very complex animation that requires very intense color and clarity to a DVD for playback on a HD TV using my software? In my arsenal is Final Cut Express-HD vers. 3, iLIfe '06 incl. iMovie and iDVD, Toast (if needed).
Please advise.

HHHMMM….. where to start. First, you can’t possibly
hold yourself to commercial quality unless you have a
commercial budget.
I don't expect commercial quality - just to be able to display the millions of colors and the extreme clarity on any TV and even better still on a HDTV. So far I only can get the quality I seek on a computer display. All my efforts to find a solution for television playback have resulted in a fuzzy and jerky animated feature. Here again I'm not looking for commercial quality - just clear, crisp and smooth.
Hollywood spends millions on
feature films. Compression hardware alone can run
several thousands if not hundreds of thousands of
dollars. Compared to iDVD included in a $79 software
suite? However, even the Hollywood produced DVDs must
rely on the DVD specification and as such, 1080i is
currently lost on them. So your answer to “isn’t iDVD
supposed to write anything I give it” is that if iDVD
takes your QT file (Which BTW, should be in the DV
format) it WILL compress it to a DVD MPEG 2 compliant
file. This means 720x480.
But I don't want any compression other than the final step MPEG2. And after reading this reply today - THANK YOU - THANK YOU - I at least understand now that I can't even use iDVD because it doesn't offer MPEG2 as a compressor.
I have located a mpeg2 encoder program that is shareware and will try to find a formule to use after iMovie HD additions of themes and chapters.
So the first step to take
is to recognize the limitations of equipment and
understand the standards. So now we should examine
the workflow to see if there is anything that can be
done. Other than knowing what Flash is, I don’t know
much about it. Can you select a frame size for doing
your animations? If so, guess what, use the 720x480
frame size. This is what iDVD is going to make it
(again, FCP may offer more options to you but that
isn’t listed in your arsenal).
Final Cut Pro isn't needed for what I'm doing, is it? I have already gotten exquisite playback quality for computers using FCE HD and I'm now trying to get the playback quality on a TV as good as I can get it.
Next, from within FCE,
do not change the settings when exporting via QT. You
want to export it as it is in FCE, you don’t want to
change it. iDVD is expecting a DV file. Any other
file and quality will likely take a hit. Finally, why
DVDs? Flash is typically web based. And computer
monitors have a much higher resolution than a TV.
Flash is generally web based but it can be used to produce a single QuickTime movie if the elements are primarily drawings as my animated feature is. Then on to Final Cut Express all of my imported clips are in QuickTime and thus are already compresssed by QuickTime's excellent compressor. I found that I do not get a good result if I allow any further compression - at least not on computer displays - as long as I export with QT conversion, compression none, millions of colors and specify the size I want it to maintain.
You
could output your Files and serve them up via a data
DVD to be played on a computer. Just curious.
I am already getting excellent playback quality on computers but now I need playback quality on any television because it is not intended only for computers.
Mike
Thanks Mike. You've already been a help in getting me away from iDVD for this project. iMovie may be OK still because its "HD". Got any more suggestions for my situation?

Problem with playback of burned audio cd (using CS6)

When playing back cd tracks on an audio cd created with CS6, there is a very slight fade-in or loss at the beginning of each track. What causes this and can it be eliminated? No problems playing the track files on the cd layout in CS6, but only when playing the actual cd in a home or car cd player.

Get the latest firmware update for the ipod.
If that doesn't fix it-stop using videora. It is a buggy piece of software that causes the majority of problems posted here regarding video.

I have a problem with IDVD when I have completed a movie and set it up with menus etc I cannot operate the burn button so I cannot make a DVD.

I have a problem with IDVD when I have completed a movie and set it up with menus etc I cannot operate the burn button so I cannot make a DVD.

Hi
Can You
Go up to File Menu in iDVD - and here down to
Save as a DiskImage
If this works - You can burn Your DVD in another way via Disk Util tool
Yours Bengt W

PROBLEMS WITH PLAYBACK ON DVDS - BURNED WITH iDVD8

Can anyone tell me what is the best speed to use when burning a DVD. I have been using the maximum speed (which I believe my computer defaults to). When I play back on a DVD player it will freeze in certain parts. When I have finished burning the DVD I have noticed grease marks and other small marks on the disc. I have been told it is because I am burning them too fast. I have since tried using 2X and am having the same problem. I am using IDVD8 and DVD-R discs.

It may be the brand of disc. Try Verbatim DVD-R or Verbatim DVD+R DL.

Problem with iDVD - cannot burn DVD.

Problem with iDVD - cannot burn DVD.
Self has a MacBook Pro, which al new software.
My problem is, when my burn a slideshow, prop process ever before burning.
Box show: Multiflexing and burning: write Lead-in, then the process stops and ejects the disc.
I have burn a Movie test – no problems.
Self use Verbatim DVD-R
Who can help - what should I do?

How did you create the slideshow and get it in iDVD?
As a general comment try following this workflow to separate the encoding and burning processes:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

How can I increase resolution when burning a dvd with elements 11 premiere

How can I increase resolution when burning a dvd with elements 11 premiere
I am trying to generate a slide show DVD....the pictures on the TV are poor quality

Welcome to the forum.
As Steve points out, a DVD-Video is set in resolution, to 720 x 480 (for NTSC), in either Standard 4:3, or Widescreen 16:9. That is as good as it can get, and is not a limitation of PrE, but of the DVD-Video specs, which were written a long time ago.
The best that one can get is to play that DVD-Video on an up-rezzing DVD player, or most BD players, that also have up-rezzing, to an HD TV monitor. Those players have dedicated chips, JUST for up-rezzing.
Then, and per Peru Bob's questions, I attain the ultimate Still Images to DVD-Video, by doing my Scaling in Photoshop, and using either the Bicubic Sharper, or Bicubic Smoother Scaling algorithms. I Scale my Camera RAW Images to match my Project's Frame Size, and Crop, where necessary to match the Aspect Ratio of my Images, to the Aspect Ratio of the Project, i.e. if going to a 16:9 Widescreen, I will lose some pixels top and bottom, but I account for that, per my asesthetic.
Note: some PrE users insist that the Scaling in PrE is as good as Photoshop's, but my critical eyes point to using PS. Also, I do NOT use JPEG, which is a lossy, compressed format, and will Save_As PSD from Photoshop, for ultimate quality.
Good luck, and please let us know the pixel x pixel dimensions of your Images.
Hunt

Does anyone experienced bad quality when burning a DVD?

Does anyone experienced bad quality when burning a DVD?
Using OS 10.6.8 and Magiv Video in iDVD, I am having a hard time creating a decent DVD. The videos per se are fine, but the intro menu and menu text and images are extremely poor quality and hard to read. What is going on?

Hi my notes on this - might be of help
DVD quality
1. iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1)
iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
About double on DL DVDs.
2. Video from
• FCE/P - Export out as full quality QuickTime.mov (not self-containing, no conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos and the Ken Burns effect NOT is used. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 or 09 or 11 are not meant to go to iDVD. Go via Media Browser and as Large (NOT HD or other resolutiona as result will suffer) or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly e.g. x4 or x1 (in iDVD’08 or 09 this can also be set)
This can also be done with Apple’s Disk Utilities application when burning from a DiskImage.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc). For SD-Video - if HD-material is used I guess that 4 to 5 times more would do.
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. I use DVD-R (no +R or +/-RW) - DVD-R play’s on more and older DVD-Players
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
(I use JES_Deinterlacer to keep frame per sec. same from editing to the Video-DVD result.)
8. Don’t burn more than three DVDs at a time - but let the laser cool off for a while before next batch.
iDVD quality also depends on.
• DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
deliver anything better that this.
HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-Player.
Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
_ Roxio Toast™ 10 Pro incl. BD-component
_ BD disks and burner if full length movies are to be stored
_ BD-Player or PlayStation3 - to be able to playback
The BD-encoded DVDs can be play-backed IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx. 25Gb.
less than 5Gb and Your result will most probably not play.
• How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
• Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
• Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are play-backed by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choice before Pro Quality)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
(x4 by some and may be even better)
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU
unclemano wrote
What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
TO GET IT TO WORK SLIGHTLY FASTER
• Minimum of 25Gb free space on Start-Up hard disk
• No other programs running in BackGround e.g. Energy-Saver
• Don’t let HD spin down or be turned off (in Energy-Save)
• Move hard disks that are not to be used to Trash - To be disconnected/turned off
• Goto Spotlight and set the rest of them under Integrity (not to be scanned)
• Set screen-saver to a folder without any photo - then make an active corner (up right for me) and set
pointer to this - turns on screen saver - to show that it has nothing to show
Yours Bengt W

When burning a DVD from Elements 13, it freezes at 90%

when burning a DVD in elements 13, it freezes at 90% and locks up elements until I cancel burn.

Jerry Jarrett
If you wish to pursue your question about burn to disc, then I would be glad for the opportunity to be of assistance.
The following would be my troubleshooting strategy and questions
1. What computer operating system is your Premiere Elements 13 running on?
2. Have you looked at the issue with and without the Intel HD Graphics 2000 and Higher preferences disabled
(See Edit Menu/Preferences/General)?
3. Where are you in Publish+Share/Disc/, DVD, AVCHD, or Blu-ray? And, what does the burn dialog's Quality Area
show for Space Required and Bitrate? What brand/type/capacity disc are you using?
4. Is the issue specific to one Timeline in one project? Or, is the problem there with another Timeline content and another
project.
I would prefer to see you sort out the burn to disc issue if possible because of the download problems associated with the 3rd party software
that is typically needed to obtain the disc product from the Premiere Elements VIDEO_TS, BDMV, or ISO Image. Excellent 3rd party software if you
can get it installed without a lot of companion garbage. Although how to have been described for the safest possible download and install, there
are no guarantees that you will not be hit with a lot of computer cleanup just to get one excellent program.
ATR

I am having a problem with playback in Final Cut 6.0.6

Hello,
I am having a problem with playback in Final Cut 6.0.6 of 1920x1080 60p footage.
I transcoded MTS files shot on a Sony NEX FS100 into Apple Pro Res mov files but the
playback stutters in Final Cut and QTime making it impossible to edit. Is this because the files
are just so big the computer is having a problem processing them? If so what should I edit in to preserve the
best quality?
I am Running Mac OSX 10.6.8
2x2.4 Ghz Quad Core Intel
32 GB 1066 MHz DDR3
Admittedly my FCUT is out of date, I intend to up to X when I finish off an ongoing project.
Thanks Luci

You might consider running diskwarrior on your drive (alsoft.com). And run diskutility, repair disk. A corruption of the drive could cause problems. Also, drive speed starts to fall sharply as the drive gets full. Make sure you have a minimum of 10% free space on the drive. You might also get a utility to check the speed of the drive. I think Aja has one.
Also, do you have anything else connected to the firewire bus? If so, try disconnecting it. You might also try disconnecting ethernet and turning off your airport. Resetting your fcp preferences couldn't hurt.
https://discussions.apple.com/docs/DOC-2491

I have a problem with vertical images burned on a cd

I have a problem with vertical images burned on a cd either from a Mac or a stand alone burner. What happens is the images come from the card and are put on the cd. Also note the the camera has been set for the computer to automatically show images vertically when shot that way. The images look good on my Mac, but are horizontal on windows computers. Both XP and Vista. What can be done?
John

Hi, thank you for the response... not sure looks that the battery its ok, I'm not sure.
Charge Information:
Charge remaining (mAh):    4356
Fully charged:    Yes
Charging:    No
Full charge capacity (mAh):    4356
Health Information:
Cycle count:    813
Condition:    Normal
Battery Installed:    Yes
Amperage (mA):    0
Voltage (mV):    12571

CS 4 Dynamic Link to Encore doesn't work most of the time. Encore stops operating after opening and periodically Premier Pro stops working. I'm told that there has been a problem with CS4 when using Dynamic Link to go to Encore and build CD's. Is there

CS 4 Dynamic Link to Encore doesn't work most of the time. Encore stops operating after opening and periodically Premier Pro stops working. I'm told that there has been a problem with CS4 when using Dynamic Link to go to Encore and build CD's. Is there a way around this? Is there a patch to correct it?

To build CD's???
What problem does Encore have with DL?
If DL is not working properly for you the way around this is to export from Premiere to either mpeg2-dvd for DVD or BluRay H.264 for BD-disks and import the files in Encore.

IDVD video encode error when burning to DVD

I am trying to burn a new copy of a project I successfully burned to DVD 2 years ago. I have not changed the source material. After the menu renders and video encoding begins I immediately get an error message "video encoding error." There are no menu warnings. All video is successfully previewed. Nothing has changed from the previous burn. The project info box shows all video and audio properly encoded and present.
What gives?

The way from FCE or FCP has been the same for me for lot's of years since FinalCut 1.2.5 I think (was no Express or Pro then)
And QuickTime Conversion never worked for me - I guess You were lucky two years ago.
FCE/P to iDVD
Several things
• How to go from FCE/P to iDVD
• Free space on Start-up hard disk
• Encoding
• Brand and type of DVDs used
• Burn speed set
• iDVD BUG
• Chapters
How to go from FCE/P to iDVD I do
• Disable Screen and Energy saver
• IMPORTANT --> FIRST in FinalCut - Mix Down Audio under Sequence Menu / Render Only / Mix-down
• Export out as a QuickTime .mov file
• Select with Mark - Chapter Mark
• Not as Self-Contained (not important but saves time and space)
• NO QUICKTIME CONVERSION (IMPORTANT)
This QT.mov file I import into iDVD from within iDVD.
Free space on Start-up hard disk
I set a minimum of 25GB (for Mac OS and iDVDs temp files)
Just double click on the Hard Disk icon (top right on DeskTop) and read on bottom part of this windows frame e.g,
( in English - 1 of 14 selected, 38.24 GB FREE)
Encoding
• I use Pro Quality encoding if material (video + menu) exceeds 40 minutes ! if less I use Best Performances
Brand and type of DVDs used
• I use Verbatim
• I use DVD-R
Burn speed set
• I set down this to x4 (or x1) - BEST IS NOT BEST at all only fastest and results in Maximum amount of BURN ERRORS !
iDVD BUG
• One can not go back to movie-project for any alterations and then go back to
the iDVD project. It will notice and ask You to either Up-date or Cancel. Neither
of them will work.
Medicine - Start a brand new iDVD project.
Use of Chapters
• I only use a to z and 0 to 9 in naming them. NO other symbol/letter !
• NO Chapter-mark at very beginning - iDVD NEEDS TO set this by it self
• No Chapter marks in or within two seconds from a transition
(Way around this last one - Export movie as QT full quality and NO Chapter marks
Import this into a new Movie-project and now You are free to set C-Ms where You want
them except at very beginning - still)
Material used to build movie
• video - I use streamingDV (or convert all other to this e.g. .mp4, .avi, .wmv etc)
• audio - I use .aiff 16-bit 48kHz or from Audio-CD (44.1kHz) - no .mp3 or direct from iTunes
• photos - I use .jpg - no .bmp etc
Trash iDVD pref. file and run Repair Permissions - and have a re-try.
from post ??
May not be relevant, but I had the same problem with iDVD, where burned DVDs showed a green screen. It was cured by quitting Quicksilver and Quickeys as well as disabling sleep and screen-saving
Yours Bengt W

Solutions to "Problem with playback/recording devi...

I've only had a few microphone/audio problems with a friend on Skype not being able to hear me or vice versa, nothing that couldn't be fixed. Usually the call would at least pick up even if there was no sound going through. But just out of the blue two days ago (Monday, May 4th), when my friend tried to call me, the call dropped without any explanation. I tried also to call, but then every time, it wouldn't even last long enough to ring and it would just drop. It kept having a notification saying "Problem with playback device" or "Problem with recording device". I've tried signing out of Skype, restarting my computer, checking all monitor audio levels, etc... I always keep my Skype up to date, but I checked again for any new in case that would allow the call to go through, but it didn't, even after I updated it to the lastest version 7.4.0.102. I tried calling Skype Testing Service a million times, but still the call won't even stay on long enough for me to read what it says under the microphone and speaker box after clicking on the connection icon; all I have time to see is "can't access sound card". The thing is, I can hear the millisecond of ringing tone, the sound it makes when the call drops, and all other sound Skype makes, so it's not a question of all sounds being on mute, but for some reason it says I have a problem with playback and recording device! Why is that?? I already searched here in the community Q&As for possible solutions to fixing the problem, but double-checking the audio settings under Tools > Options has not changed anything unfortunately. PLEASE HELP!!!

I've never seen that message. What exactly did it say? You're using the native media from the T3i, it hasn't been converted, it's never been inside of Final Cut Pro?

Problems with playback when burning to DVD or saving as MPEG

Similar Messages

Maybe you are looking for