Problems with port 6000 from my GUI application

Hi,
I have a GUI application that try to open a Corba connection with a server on a dedicated port, but when I put my port to 6000 and launch my GUI application it will try eternally to open the Corba connection and blocks. I think that the 6000 port is used by X11 that is listning , is there any solution to disable the listning of X11 server on 6000 port.
Regards,

Well, you shouldn't technically be using Port 6000-6063. They are registered to X11. See http://www.iana.org/assignments/port-numbers.
A similar port conflict exists with the Oracle Distrubted Lock Manager and X11 on Sun Cluster
environments (and probably VCS as well). Someone at Oracle got silly and used ports 6000-6031 for
the UDLM . 6000 is registered to X11 - Don't use it.
But that's not answering your question.
cd /etc/rc2.d/
sh S99dtlogin stop
mv S99dtlogin .NOS99dtlogin
That should take care of stopping X11 from starting at boot time.

Similar Messages

NAM 5.1 How to create Application with port range from cli?

Hello,
I can create new Applicaion with port range from GUI, but I can not do it from CLI
If I do it by CLI as a:
nam# application
nam# name mkst-cur-A
nam# match udp 16001-16009
nam# exit
then
nam# show application app-tag 268435576
custom:120 (268435576) mkst-cur-A
udp 16001
nam#
But if I do it by GUI and than
nam# show application app-tag 268435576
custom:120 (268435576) mkst-cur-A
udp 16001 - 16009
nam#
How to do it by CLI?

Hi Alexey,
Sure, the function you're looking for is in the ANALYSIS panel under the "CUrve Fitting" palette-- it's called "Linear Mapping". You will need to create the desired X channel prior to calling this function, though, so you will probably need to use the ANALYIS function "Generate Numeric Channel" in the "Channel Functions" palette.
Brad Turpin
DIAdem Product Support Engineer
National Instruments

I am facing a Problem with reading images from database

Hi everybody..
any help will be most appreciated, I am facing problem with reading images from database. I am pasting my code...
string connect = "datasource = localhost; port = 3306; username = root; password = ;";
MySqlConnection conn = new MySqlConnection(connect); // creating connecting string
MySqlCommand sda = new MySqlCommand(@"select * from management.add_products ", conn); //creating query
MySqlDataReader reader;
try
conn.Open(); // Opening Connection
reader = sda.ExecuteReader(); // Executing my Query..
while (reader.Read())
byte[] imgg = (byte[])(reader["Picture"]);
if (imgg == null)
pc1.Image = null;
else
MemoryStream mstream = new MemoryStream(imgg);
pc1.Image = System.Drawing.Image.FromStream(mstream);
It says Parameter not Valid... i am reading all the images from database

I agree with Viorel. You are getting the error because the format of the data is incorrect probably because the data was modify. It may not be the reading of the database the is incorrect, but the application that wrote the data into the database. You need
to compare the imgg array data with the data before it was written to the database to see if the data matches. I usually start by comparing the number of bytes which is easier to check then compare the actual to isolate which function is changing the
byte count.
An image is binary data. The standard VS methods for reading and writing data (usually stream classes) default to ASCII encoding which will corrupt binary data. The solution usually is to use UTF8 encoding instead of the default ascii encoding.
Ascii encoding with stream often aligns the data and adds extra null bytes to the end of the data which can produce these type errors.
jdweng

Problems with retrieving data from tables with 240 and more records

Hi,
I've been connecting to Oracle 11g Server (not sure exact version) using Oracle 10.1.0 Client and O10 Oracle 10g driver. Everything was ok.
I installed Oracle 11.2.0 Client and I started to have problems with retrieving data from tables.
First I used the same connection string, driver and so on (O10 Oracle 10g) then I tried ORA Oracle but with no luck. The result is like this:
I'm able to connect to database. I'm able to retrieve data but from small tables (e.g. with 110 records it works perfectly using both O10 and ORA drivers). When I try to retrieve data from tables with like 240 and more records retrieval simply hangs (nothing happens at all - no error, no timeout). Application seems to hang forever.
I'm using Powerbuilder to connect to Database (either PB10.5 using O10 driver or PB12 using ORA driver). I used DBTrace, so I see that query hangs on the first FETCH.
So for the retrievals that hang I have something like:
(3260008): BIND SELECT OUTPUT BUFFER (DataWindow):(DBI_SELBIND) (0.186 MS / 18978.709 MS)
(3260008): ,len=160,type=DECIMAL,pbt=4,dbt=0,ct=0,prec=0,scale=0
(3260008): ,len=160,type=DECIMAL,pbt=4,dbt=0,ct=0,prec=0,scale=1
(3260008): ,len=160,type=DECIMAL,pbt=4,dbt=0,ct=0,prec=0,scale=0
(3260008): EXECUTE:(DBI_DW_EXECUTE) (192.982 MS / 19171.691 MS)
(3260008): FETCH NEXT:(DBI_FETCHNEXT)
and this is the last line,
while for retrievals that end, I have FETCH producing time, data in buffer and moving to the next Fetch until all data is retrieved
On the side note, I have no problems with retrieving data either by SQL Developer or DbVisualizer.
Problems started when I installed 11.2.0 Client. Even if I want to use 10.0.1 Client, the same problem occurs. So I guess something from 11.2.0 overrides 10.0.1 settings.
I will appreciate any comments/hints/help.
Thank you very much.

pgoel wrote:
I've been connecting to Oracle 11g Server (not sure exact version) using Oracle 10.1.0 Client and O10 Oracle 10g driver. Everything was ok.Earlier (before installing new stuff) did you ever try retrieving data from big tables (like 240 and more records), if yes, was it working?Yes, with Oracle 10g client (before installing 11g) I was able to retrieve any data, either it was 10k+ records or 100 records. Installing 11g client changed something that even using old 10g client (which I still have installed) fails to work. The same problem occur no matter I'm using 10g or 11g client now. Powerbuilder hangs on retrieving tables with more than like 240 records.
Thanks.

I have a problem with Apple store when installing large application: The system crashes. Any suggestion?

I have a problem with Apple store when installing large application (example xCode): The system crashes.
It begun with 10.8 usualy with few tries it work but with 4.6 no succes.
Any suggestion?

If you have more than one user account, you must be logged in as an administrator to carry out these instructions.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select the most recent panic log under System Diagnostic Reports. Post the entire contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

Face time fades out and then tries to reconnect on new ipad retina display on WiFi. Iphone 4s has no problem with face time from exact same location and same contact. WiFi signal strong on both devices. What gives?

Face time fades out and then retries to connect (new Ipad Retina Display) on WiFi. Iphone 4s has no problem with face time from same location and same contact. What gives?

rdallas001 wrote:
Is the router to small?
Not necessarily, if you are using Facetime all the data goes through your WiFi router, your cable/DSL modem, your ISP and the internet to Apple's Facetime servers and then, in reverse, down to the Facetime recipient. If your ISP connection is too slow or there is excessive traffic on the internet you can have Facetime problems.
Most WiFi routers can handle this unless others in the house are also using WiFi at the same time. The problem may be your ISP connection or congestion on the internet, etc.

HELP!! asa 5505 8.4(5) problem with port forwarding-smtp

Hi I am having a big problem with port forwarding on my asa. I am trying to forward smtp through the asa to my mail server.
my mail server ip is 10.0.0.2 and my outside interface is 80.80.80.80 , the ASA is setup with pppoe (I get internet access no problem and that seems fine)
When I run a trace i get "(ACL-Drop) - flow is deied by configured rule"
below is my config file , any help would be appreciated
Result of the command: "show running-config"
: Saved
ASA Version 8.4(5)
hostname ciscoasa
domain-name domain.local
enable password mXa5sNUu4rCZ.t5y encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 10.0.0.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
pppoe client vpdn group ISPDsl
ip address 80.80.80.80 255.255.255.255 pppoe setroute
ftp mode passive
dns server-group DefaultDNS
domain-name domain.local
same-security-traffic permit intra-interface
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network Server_SMTP
host 10.0.0.2
access-list outside_access_in extended permit tcp any object server_SMTP eq smtp
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
object network obj_any
nat (inside,outside) dynamic interface
object network server_SMTP
nat (inside,outside) static interface service tcp smtp smtp
nat (inside,outside) after-auto source dynamic any interface
access-group outside_access_in in interface outside
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 10.0.0.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
telnet timeout 5
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
vpdn group ISP request dialout pppoe
vpdn group ISP localname [email protected]
vpdn group ISP ppp authentication chap
vpdn username [email protected] password *****
dhcpd auto_config outside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:c5570d7ddffd46c528a76e515e65f366
: end

Hi Jennifer
I have removed that nat line as suggested but still no joy.
here is my current config
Result of the command: "show running-config"
: Saved
ASA Version 8.4(5)
hostname ciscoasa
domain-name domain.local
enable password mXa5sNUu4rCZ.t5y encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 10.0.0.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
pppoe client vpdn group ISP
ip address 80.80.80.80 255.255.255.255 pppoe setroute
ftp mode passive
dns server-group DefaultDNS
domain-name domain.local
same-security-traffic permit intra-interface
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network Server_Mail
host 10.0.0.2
access-list outside_access_in extended permit tcp any object Server_Mail eq smtp
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
object network obj_any
nat (inside,outside) dynamic interface
object network Server_Mail
nat (inside,outside) static interface service tcp smtp smtp
access-group outside_access_in in interface outside
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 10.0.0.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
telnet timeout 5
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
vpdn group ISP request dialout pppoe
vpdn group ISP localname [email protected]
vpdn group ISP ppp authentication chap
vpdn username [email protected] password *****
dhcpd auto_config outside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:f3bd954d1f9499595aab4f9da8c15795
: end
also here is the packet trace
and my acl
Thanks

Problem with date format from Oracle DB

Hi,
I am facing a problem with date fields from Oracle DB sources. The date format of the field in DB table is 'Date base type is DATE and DDIC type is DATS'.
I mapped the date fields to Date characters in BI. Now the data that comes to PSA is in weird format. It shows like -0.PR.09-A
I have changing the field settings in DataSource to internal and external and also i have tried mapping these date fields to text fields with out luck. All delivers the same format.
I have also tried using conversion routines like, CONVERSION_EXIT_IDATE_INPUT to change format. It also delivers me the same old result.
If anybody of you have any suggestions or if anybody have you experienced such probelms, Please share your experience with me.
Thanks in advance.
Regards
Varada

Thanks for all your reply. I can only the solutions creating view in database. I want some solution to be done in BI. I appreciate if some of you have idea in it.
The issue again in detail
I am facing an issue with date fields from oracle data. The data that is sent from Oracle is in the format is -0.AR.04-M. I am able to convert this date in BI with conversion routine in BI into format 04-MAR-0.
The problem is, I am getting data of length 10 (Output format) in the format -0.AR.04-M where the month is not in numericals. Since it is in text it is taking one character spacing more.
I have tried in different ways to convert and increased the length in BI, the result is same. I am wondering if we can change the date format in database.
I am in puzzle with the this date format. I have checked other Oracle DB connections data for date fields in BI, they get data in the format 20.081.031 which will allow to convert this in BI. Only from the system i am trying creating a problem.
Regards
Varada

A problem with copying text from english pdf to a word file

i have a problem with copying text from english pdf to a word file. the english text of pdf turns to be unknown signs when i copy them to word file .
i illustrated what i mean in the picture i attached . note that i have adobe acrobat reader 9 . so please help cause i need to copy text to translate it .

Is this an e-book? Does it allow for copying? It is possible that the pdf file is a scan of a book?

Link Problem with port 2 in WLC 4402

Hi,
I have a problem with port 2 in Wireless Lan Controler 4402. The problem is that the distribution port 2 of the WLC not link with the switch (3750). We receive the WLC and we follow the autostart wizard and we enable LAG. The wizard finish, I restart the system and all works fine. The two distribution ports of WLC, 1 and 2 appears UP and the LAG works correctly. After this we upgrade the firmware of the WLC to the version AIR-WLC4400-k9-6-0-182-0.aes and we restart the system again but at this time port 2 does not link and port 1 link OK. We do not know the reason why port 2 doesn´t link? Could you help me ?
Thank in advance.
Regards.

Does it properly refuse authentication ? Or does the login page stop appearing or something ?
There was a bug with the webauth dying under heavy load, regardless of number of identical accounts used.
One good way for you to check would be, when problem occurs, to create a second backup guest user and see if that would start working. If it doesn't, the account is not the problem.
I'm not aware of any maximum of usage of the same account.
Which 4.2 exactly are you running ?

I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I hav

Hi
I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I have followed adobes recommendations and have tried both letting the printer respektive photoshop manage the colors. But nothing works. I see that there are different opinions about which is best to do so I tried both. I have the latest printer driver installed. Can anyone help me with this?

Do the following:
Print a test page from the printer. Perhaps the print head needs cleaning via its maintenance facility.
Let the printer manage colors, not PSE
Calibrate the monitor

Problem with controlling Annotations from Excel VBA

Hi,
I have a PDF document that has plenty of sticky notes attached to it. These sticky notes have been added by multiple authors on all pages of the document. I am trying to import the contents of these sticky notes, their author and the page number to an excel spreadsheet. I am using Excel 2007 and Acrobat Professional 9.0.
This is the code that I am currently using to import the sticky notes, but the problem that I am facing is that when I run the macro -
Same sticky note contents, author and page numbers are imported multiple times
Not all sticky notes are imported, only some of them appear in the final excel spreadsheet
When I compare the number of sticky notes to that in the original PDF file, the number is correct. But the content is repeated content and that is the reason why only some of the sticky notes are imported.
This is an activity that I need to do on regular basis and the number of sticky notes that I need to import to excel may range between 100 to 200. It is really difficult to do this task manually, so an excel VBA macro could prove really helpful.
Sub ImportComments_Click()
Dim Fpath As String
Dim WordObj As Object
Dim wbkOutput As Excel.Workbook
Dim iRow As Integer
Dim i, j, k As Integer
Dim lRet As Long
Dim objAcroAVDoc As New Acrobat.acroAVDoc
Dim objAcroPDDoc As Acrobat.AcroPDDoc
Dim numPages As Long
Dim lAnnotscnt As Long
Dim Subtype As String
Dim NumComments As Long
Dim AcroApp As Acrobat.AcroApp
Dim objAcroPDPage As Acrobat.AcroPDPage
Dim annot As Acrobat.AcroPDAnnot
Sheets("Defect Log").Select
Range("L3").Activate
Fpath = ActiveCell.Value
Sheets("Defect Log").Select
Range("A1").Activate
i = 0
Do While (Not (IsEmpty(ActiveCell.Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 1).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 2).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 3).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 4).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 5).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 6).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 7).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 8).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 9).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 10).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 11).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 12).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 13).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 14).Value)))
i = i + 1
ActiveCell.Offset(1, 0).Select
Loop
iRow = i + 1
Set wbkOutput = ActiveWorkbook
lRet = objAcroAVDoc.Open(Fpath, "")
Set objAcroPDDoc = objAcroAVDoc.GetPDDoc
numPages = objAcroPDDoc.GetNumPages()
Set objAcroPDPage = objAcroPDDoc.AcquirePage(0)
For k = 1 To numPages
lAnnotscnt = objAcroPDPage.GetNumAnnots()
For m = 0 To lAnnotscnt - 1
If lAnnotscnt = 0 Then Exit For
Set objAcroPDAnnot = objAcroPDPage.GetAnnot(m)
If (objAcroPDAnnot.GetContents <> "" And objAcroPDAnnot.GetSubtype = "Text") Then
Cells(iRow, 5).Value = k
Cells(iRow, 2).Value = objAcroPDAnnot.GetContents()
Cells(iRow, 11).Value = objAcroPDAnnot.GetTitle()
iRow = iRow + 1
End If
Next m
Set objAcroPDPage = objAcroPDDoc.AcquirePage(k)
Next k
lRet = objAcroAVDoc.Close(1)
Set objAcroAVDoc = Nothing
Set objAcroPDAnnot = Nothing
Set objAcroPDPage = Nothing
Set objAcroPDDoc = Nothing
End Sub

Make sure you are current with 9.x patches, just on general principles.
The code seems fine – nothing jumping out at me.
You can also look at using the JSObject methods and trying this via the JavaScript stuff – that will give you more access to the Annotation information…
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Thu, 24 Nov 2011 04:25:12 -0800
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: Problem with controlling Annotations from Excel VBA
Problem with controlling Annotations from Excel VBA
created by apreeti<http://forums.adobe.com/people/apreeti> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/4044740#4044740

Problem with trasferring music from itunes to Iphone 3Gs.

Hi
I have a problem with trasferring music from Itunes to Iphone and that is,
as soon as I finish transferring music to my Iphone, Itunes suddenly stops at the stage of where it says (at the top-centre of the screen), 'Sync Min's Iphone'.
Due to this reason, I've restored my Iphone a couple of times and reinstalled itunes but same problem occurs whenever I try to transfer music.
It appears music are successfully transfered since I could play the music on my Iphone but I wanna fix the problem since it's pretty annoying.
is there anything I can do about it?
Thanks
Message was edited by: Minsik Park

Make sure you have the latest version of iTunes (8.2.1?). If so, I'd reinstall iTunes, if the phone is otherwise working fine.
Phil

Problem with trasferring music from Itunes to Iphone

Hi
I have a problem with trasferring music from Itunes to Iphone and that is,
as soon as I finish transferring music to my Iphone, Itunes suddely stops at the stage of where it says (at the top-centre of the screen), 'Sync Min's Iphone'.
Due to this reason, I've restored my Iphone a couple of times and reinstalled itunes but same problem occurs whenever I try to transfer any music.
It appears music are successfully transfered since I could play the music on my Iphone but I wanna fix the problem since it's pretty annoying.
are there anything I can do about it?
Thanks

I am having the same problem however i get a error 13001 message and my itunes says that there is music in my iphone but there really isnt.. any one have a solution???

Problem with remove task from schedule in PWA

In our environment problem with remove task from schedule by PWA.
Problem is only when I want to remove few task in the same time, but the operation one by one is correct.
In my opinion problem is with calculation schedule after remove tasks, column ID include wrong value it means that Number ID does not generate in the correct order same of numer
disappear. Click Calculate button on ribbon causes problem with finshed operation and save project.
Problem occurs only machine with IE 11.0 browser without compability mode, on other machine for example on the same project with IE 8,9,10 everything is correct.
Problem appeared recently, earlier everything was OK.
Txn, Dariusz Moczyński

Hi Darius,
I'm a bit confused. You are now talking about 2 issues.
For the first one, you cannot edit anymore tasks in PWA, with any browser versions? Is it happenonog for any users on any projects? Try the following solutions publish the project from Project Pro and see if it helps. Press CTRL F5 to delete IE cache. Ensure
that your PWA URL is added to the trusted site and/or compatibility sites. Check for the ULS logs or javascript errors.
For the second issue, please refer to my previous reply, this obviously cannot be considered as a bug since it is happening with a non supported browser version and working properly on supported versions of IE.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Problems with port 6000 from my GUI application

Similar Messages

Maybe you are looking for