Problems with Premiere Pro CS5

Everyone seems to be getting replies to all questions around here so i hope someone can help me out.
My premiere pro CS5 has decided to act up for the past three weeks: everytime i open an old project, it loads up, opens the project window and timeline, feels like it's all good, but then the spinning wheel appears and all fans go out of control on my macpro, and this process can go on for hours until my only option is to force quit the program, SADLY...
It's almost as if it's trying to conform all items in the project panel, but it mentions "all media loaded", and there are no dinamic link files to find.
There are two projects i'm constantly getting back to: one is a 720P poject which contains two timelines, a 30 min one which only has music now, and a 5min timeline with music, go pro footage and rendered HD animations from AE, all at 720P. Opening this project can take up to 40 min where i'm staring at a spinning wheel and hoping for the fans to not explode, that was not the case three weeks ago; I could close everything, shut down for the night and get back to it the next day.
Second project is a holiday video of Asia which goes for one hour and fifteen min, but it was all shot in 07 with an old Sony DV on standard def of course. Opening this project used to be smooth, even though i often moved things around and had to find them again. But now i want to rework on its sound, noise reduction anf create a nice DVD for my family, but I cannot open the project without having to wait for HOURS, and HOURS and HOURS - the longest being three hours and the spinning wheel was still going and the fans were louder than a lawn mower....
This never used to happen before and it is worrying me as I started editing a short film in 1080P, so far i can open it nicely, but it may turn into a mess like the other two projects.
The two projects used to have dinamic link files as i always had after effects and Encore working along PPRO to avoid rendering. At first, i though ADL was the problem for such a slow bootup, so i got rid of every ADL files and rendered instead, which consequently helped me in the process. BUT NOW, it is impossible to open them without a long and frustrating wait.
If i start a new project, everything is fine and will reopen smoothly - what are your thoughts on the matter guys??? Can a project be too heavy and requires 4 hours to load?...
I have a quad core MaPro with 32gb of RAM, so this should render and locate files lightning FAST....
I already reinstalled the whole suit but the problem still happens, i'm thinking about a complete format and reinstalling eveything from scratch...
thanks in advance for your suggestions.

Try these steps. Something is definately wrong with your loading times.
1. Delete PrP preferences (Option - Shift when booting up PrP)
2. Clean Media caches (Preferences Menu/Media)
3. Delete preview files
You dont mention where and on what system your media files are stored. For best performance a raid array is desirable.
4. Make new sequence and copy timeline from old to new.Do this if the above stuff doesn't help.
5. Upgrade to 5.5 where a lot of issues has been resolved.

Similar Messages

Problem with Premiere Pro CS5 project files bloating

Has anyone had the same problem that we're experiencing? - we have Production Premium CS5 installed on a machine with Win 7 Pro x64. We have three separate edits all of which are experiencing bloating of the .prproj project file. Often this bloating seems to occur when no importing of assets has occured, just changes in the edits. A project which started at 5mb has bloated to 1.5GB and we can no longer save it. Another project has bloated to 200mb and continues to grow in size. We have not brought in any weird assets, although we are using hi-def footage.
We upgrade from CS3 and never had this problem using Premiere CS3.
We can't fix the problem by 'remove unused footage' as this doesn't reduce the project size, although it does remove the unused footage.
We can't fix it by importing the project into a new clean project as the problem and huge file size just comes with
We can't fix it by using the project manager to collect up the project as it requires to save before collecting and the problem files can't be saved.
A couple of points to note - these projects were originally on Premiere CS3 and were upgraded to CS5. The footage is either Sony EX3 or Canon 5D - both HD.
The machine it's running on has 8gb of RAM.
Currently the projects I'm working on are gradually grinding to a hold with no way to make the files usable again.
Any suggestions are greatfully recieved as I'm at a loss. I've reported this to Adobe, and will report back if I get anything useful.
thanks.

natswilson wrote:
TClark,
I'm shocked that you are having the same problem on a mac. This seems to suggest a problem that could be really widespread. You've also beaten my 1.5GB file bloat size.
What the hell is going on with Premiere Pro? I'm surprised to have heard nothing from Adobe either via my support request or on this forum, save for Jeremys useful work around, considering how serious an issue this is.
I've had to break all the projects I'm working on which have multiple timelines in each project into a new seperate project per timeline in order to reduce the file bloat problem and reduce the risk of me loosing all my work in one go on a bloated file.
Adobe - we could do with some help here. It's frustrating to have spent so much money on licences for this software only to have virtually non-existant help when a serious flaw in the software manifests itself.
Nat
Yeah...it's really a bummer that no one is acknowledging it. It's pretty serious!
I hope Dennis jumps in soon!

Problem with Premiere Pro CS5.5

I have Premiere Pro CS5.5. It worked fine on my old Macbook Pro, but I now have a retina MBP running OS 10.10.2 and when I try to open Premiere I get a message saying I need to install a "legacy Java SE6 runtime" - and when I follow the link to the download, I get a warning from Apple that that is an older version of Java, which has now been superseded. Anyone else met this problem? Any advice on how to get my PP CS5.5 working again?

Hi Alan,
Premiere Pro CS 5.5 is not tested on Yosemite. In my opinion you should not work with CS 5.5 on Yosemite. It might not be a smooth experience.
Thanks,
Rameez

Problem with premiere pro cs5 creating Arabic subtitle

Hi All,
I have problem with creating arabic subtitle in premire.
I have a the arabic text in my mail but when I copy and paste the text, all the text is swaped, it does't show the correct text.
Any idea on that?
Many thanks.

Thank you

Adobe Audition CS5.5 with Premiere Pro CS5

Hello everybody.
I am considering downgrading from Master Collection CS5 to Adobe Production Premium CS5.5
But quite frankly it's just because of one application.
Though, i am in doubt if i'll actually going to make the downgrade.
And as you could and might have guessed it is the Adobe Audition CS5.5 Application.
Though really the whole pack has a GREAT improvement overall, I just actaully want to mix SEAMLESSLY with Premiere Pro and sound editing application (Audition).
Which leads me to my next question.
Now with Adobe Soundbooth CS5 closed off (by April 24th), and an UPGRADE for Soundbooth CS5 users to Audition CS5. Does this mean that Audition CS5.5 works SEAMLESSLY with Premiere Pro CS5?
Is there a dynamic link between the two applications? (Audition CS5.5 and Premiere Pro CS5)
AM i able to send mixes between the two? I really don't want to loose any Audio data, such as 5.1 channel mapping, volume mixing, denoising, general mixing etc.
All i really need is some good quality sound editing which works seamless, as After Effects and Premiere Pro has proved to me can be done.
Just want to know if it is possible. Or if I REALLY have to upgrade in order to get the sweet apples.
Best
Lucas

Hi _durin_
Thanks for your quick response.
But I didn't quite understand your answer.
I have seen Jason Levine's video earlier, as CS5.5 was announced and it looks natively good. I understand the mixdown attributes etc.
Please correct me if im wrong HOWEVER this workflow and settings applies still to ONLY the new CS5.5 Version?
Im currently using Master Collection CS5.
Instead of getting either the Production Premium, or Master Collection I am strongly considering updating Soundbooth CS5 to Audition CS5.5 (the option is there as i can tell by SoundBooth's website, though i get a weird error message when I click the update link...)
However I need to know, IF Audition CS5.5 works well with the PREVIOUS version (that'll be CS5 not 5.5), of Premiere Pro.
Are there an option to render the reference video, and generate a interchange session from WITHIN Premiere Pro CS5 to Audition CS5.5?
Im sorry if I either sound harsh or "willingly" misunderstanding. But I have only documentation on how the integration works between the current versions (meaning 5.5).
Im as you can guess VERY confused over the move from Adobe to make a .5 version instead of a full-fledged CS6 solution. It causes a stir, cause I then don't know much of the integration between the previous applications.
I have seen as an example that Photoshop CS5 have gotten the update to receive paintings/files made with their new touch API. So I wonder whether integrational features will be a part of the CS5 pack since, as i've mentioned, an application like Soundbooth gets replaced with Audition, with an upgrade option for the Soundbooth owners.
Im confused and hope you can help me clear my mind up, whether to upgrade or not. I will download the trial eventually, but not onto my current CS5 system since I already use this in my daily video work and want to AVOID confusion.
Best
Lucas

How can I reduce (or remove) camera shakes in a video with Premiere Pro CS5???

I want to reduce (or remove) camera shakes in a video with Premiere Pro CS5. Is there an build-in plugin I can use, or do I have to download / buy one? Thanks.

You didnt need to look very far down the page to see this...
http://forums.adobe.com/thread/619165?tstart=0

Need info about nvidia graphics card supported with premiere pro cs5

Hi
I need information about nvidia graphics card supported with premiere pro cs5
If I have a computer(portable) with this video card or graphics card :
nVIDIA® GeForce™ GTX 285M with 1GB DDR3 Video Memory available in Single or Dual (SLi) Configurations
Microsoft® DirectX® 10 Compatible
is it going to support MPE in premiere pro cs5?
Regards,
Vinay

To be clear:
You asked about supported cards. Here is a list of supported cards. Others on this thread are telling you how to make an unsupported card function to some degree using a method that is not advocated by Adobe.

I have 64 bit windows 7 and CS4 Production Premium. I have a problem with Premiere Pro CS4, it keeps

I have 64 bit windows 7 and CS4 Production Premium. I have a problem with Premiere Pro CS4, it keeps freezing and Crashing. A simple thing like leaving the project idle for about 15 minutes, you come back and find that it has frozen. Also if you drag out a clip on the timeline you will find that the whole application freezes. Any possible solutions would be much appreciated.

Could be several factors at play here. This ARTICLE might give you some tips on getting your computer ready for an editing session. Note that there are some added tips on Win7, thanks to Black Viper, near the end.
If nothing is helping, then the tips in this ARTICLE might help you find some clues amongst the breadcrumbs left behind with a hang, or crash.
The link in this ARTICLE will give you some general troubleshooting tips.
If nothing improves, then please post back with more details. This ARTICLE will give you tips on what would be helpful.
Good luck,
Hunt

Using my JVC BR-DV3000E DVR with Premiere Pro CS5

I have been testing out the use of my JVC BR-DV3000E DVR (Digital Video Recorder) using a new PC running Windows 7 (64 bit) and Premiere Pro CS5. The connection is via the firewire cable supplied with the device. It worked fine on my original PC running Windows XP with Premiere Pro 1.5.1.
When I open the capture window in CS5 it shows the message "Device Offline" at the top of the capture window and all the transport controls are greyed out. I have played around with the settings but nothing seems to overcome the problem. I am trying to capture miniDV footage in SD. Has anyone come across this problem before on either the same device or similar and has anyone any suggestion on how to fil the problem please?

Try these to see if they work
SD capture http://windv.mourek.cz/ or http://www.scenalyzer.com/main.html
I do know that the demo of Scenalyzer puts a mark in the video, so don't do anything real until you pay and enter the registration code
I don't know about the other program

Why Do I Have Choppy Video Preview with Premiere Pro CS5.5

Current Build:
Choppy Playback Adobe Premiere Pro
Adobe Premiere Pro CS5.5 V5.5.2
Computer Build
Intel i7-2600K CPU @ 3.4 GHz/8M
ASUS Sabertooth P67
Windows 7 Pro
1000WATT Power Supply
(4) 4GB DDR3--1333 (16 GB RAM Total)
64 Bit Operating System
120GB Intel 510 SATA III Hardrive
WD 1TB SATA-3 64MB Hard Drive
(2) Fantom 2TB (USB) External Hard Drives (Where Video is stored)
(2) XFX HD6850 1 GB Video Cards run in Crossfire
(1) Scratch Disk 869.1 GB
Pulling HD Video from a Sony Handy Cam 1080 etc.
Guessing its going to be hardware related and I would like to know how to get this thing running seamless.

PPro before the cloud does not support crossfire... and that may cause problems
Dual Card SLI http://forums.adobe.com/thread/872941
-problem http://forums.adobe.com/thread/872103
USB2 hard drive is too slow for video editing
External eSata or USB3 are both fast enough for video editing... eSata is better - http://forums.adobe.com/thread/1117813
ONE possibility is this $47 USB3 dock with fan http://www.amazon.com/StarTech-SuperSpeed-Docking-Station-Cooling/dp/B0055PL2YI

Quicktime 7.71 compatible with Premiere Pro CS5?

I am having issues importing and exporting a clean movie. It is showing some interlacing through certain scenes and the titles are jumpy both when they are still and during the roll. I currently have Quicktime V 7.6.8 (1675) and am wondering if I need to update this. However I was hoping to find out if it was compatible with Adobe Premiere Pro CS5. The Adobe site is so heavily weighted to CS5.5 I did not find anything over there. Here are the specs for the clip.
Here are the clips properties.
Quicktime Movie
Image Size 720 X 486
Pixel Depth 24
Frame Rate 29.97
Average Data Rate 27.2 MB/second
Average Frame Rate 29.98 FPS
Uncompressed 10 bit.
Thanks for the help.

Dennis,
I'm also still on CS2, and the old QT 7.3.5 worked fine with it. I resisted the 7.4.x versions, as they were doing a poor job with so many Adobe products. When 7.5.x came out, I waited, until the field reported. All seemed to be fine, so all of my computers got 7.5.5, and all is great. Though I also have iTunes (on the laptop), I have hesitated to allow any upgrades to take place, regardless.
There are two new threads on the PrE forum, where 7.6.2 broke PrE, and 7.5.5 "fixed" those user's issues. There have been a couple of QT Player issues here too, and they involved 7.6.2. Do not know if Apple is up to 7.6.3, or not.
Now, I am a firm believer in not trying to "fix," what ain't broke [SIC]. Unless I can directly benefit from a "feature," I am loathe to just go with the "newest." In most cases, this policy has kept me from having to roll-back, in hopes that I can fix some problem from a new and improved version of X.
Totally OT for this thread, but do you have any insight on the differences in the Functional Content, i.e. Transistions and Effects, between the Mac and the PC versions of CS4? There have been several threads from Mac-users, and so far no one has had anything but sheer speculation. I don't know if you've seen any of those threads, but if you have any ideas, I'm sure that many Mac-users could benefit from those. [Sorry to go so OT.]
Thanks,
Hunt

Long render time with premiere pro CS5 lately, help!

lately my premiere pro CS5 render extremely slow
i have a 6GB ram 64bit windows 7
is it normal to render a 10 minutes quicktime/h264 codec in 5 hours?
please take a note that this happened recently, so i think my pc spec. should not be the problem
thanks in advance

You start off with the wrong sequence settings. To resolve that, right click on a clip in the project panel and select 'New Sequence from Clip". That will give you the correct sequence setting for your source material.
When exporting, never use QuiRcktime, since it is a 32 bit application, plagued with numerous severe problems, hence the name. Use plain 64 bit H.264 codec for exporting. If you use Maximum Render Quality, your export can take many times longer than without that checked.
Your memory and presumably the rest of your system (please give details) is not up to this task, especially not when you start with the wrong sequence settings, export with a 32 bit codec and have MRQ turned on.

How to work with Premiere Pro cs5.5 and After Effects cs5 together?

I have edited my movie in premiere pro cs5.5 and made the rough cut. In premiere, i have edited the video, put in soundtrack and foley. Now, i need to add muzzle flashes & blood splatters in some scenes and final color correction using After Effects cs5.
When i import the premiere project in AE and make the changes, and then i export it back as premiere project. When i open this prmiere project, it shows vaious kind of errors and no changes are retained that i did in AE. Also, when i import the premiere project (which has 4 different sequences) in AE, all the media that has been imported in the premiere project also opens in AE making it difficult to organize the media.
How should i work now so that i add vfx and color correction using AE cs5?
I thought of exporting the video from Premiere pro and then open the video in AE and add vfx to some scenes and color correction to the full video and render it out again. But, this is the first time i am using AE and i am not sure if this is the best way. PLEASE HELP.
Or, i could import the whole project in AE, add vfx, do color correction AND then export to video from AE. But i think, it will be better if i export the video from Premiere as it has loads of options to choose from while exporting to a movie.
The dynamic link does not work between Premiere Pro Cs5.5 and After Effects cs5. Even if it does, its not working on my pc.
All the footage is in HD and i want the final result in best quality HD too. PLEASE Help!

If you are working between After Effects and Premiere Pro but with versions that are not the same number, you need to just work with movies rendered and exported as intermediate, lossless files.
Dynamic Link only works between After Effects and Premiere Pro of the same version number, and only when they are installed as part of the same suite.

After having to reinstall my drive with applications I get a message with Premiere Pro CS5 that it can't find any "capable video play modules" and asks me to "update" my "video display modules". How do I do this? I am using a mid-2010 iMac 27" with 10.7.3

After having to re-install my start-up drive recently I am getting a message with Adobe Premiere Pro CS5 that it can't find any "capable video play modules" and asks me to "update" my "video display modules". I am using a mid-2010 iMac 27" with OSX 10.7.3. How do I do this?

Premiere is an Adobe application and is supported in their forums.
Good luck.
x

Switching tabs while working with Premiere Pro CS5

Hello there.
I am currently working with Adobe Premiere Pro CS5 and I notice that when I'm reproducing/previewing the timeline or am recording, for example, an audio track, everytime I switch tabs (switch to another window or to desktop), in this case the recording stops. I've searched around Preferences and in help files and I cannot find an option to make Premiere continue what he's doing despite me changing windows. Is this even possible? It would be very helpful.
Cheers!

>Is this even possible?
No... PPro must have full control of the computer to work... shift to another program and PPro stops

Problems with Premiere Pro CS5

Similar Messages

Maybe you are looking for