Problems with Program View

Can't see the .avi in the Program View. I can see other files like .jpg but I have to move tham to Video 2 or Video 3 section. I can see .avi in the Source view. Please help, what am I doing wrong? Thanks!!!!!!

The Video CODEC is Xvid. PrE will never likely be able to work with that CODEC. I would suggest converting that Xvid to something that PrE can handle, like DV-AVI. There are plenty of converters that can handle that footage. Some need the Xvid CODEC installed on the system, but some have it built-in.
Xvid is a delivery-only CODEC, designed for streaming media, and not for editing. It is very highly-compressed, and even with conversion, most of the data has been lost by outputting to Xvid. If you can possibly go back to before the Xvid compression, you will have a much better file.
Good luck,
Hunt
PS - why you see it in the Source Monitor, is because that is but a simple player (like WMP), where the Program Monitor is showing the file that is meant to be edited - two very, very different things.

Similar Messages

Problem with a view in XK01 transaction

Hi All,
I am working on upload conversion for Vendor Master. While doing conversion, i am getting a problem with a Contact person view in XK01 transaction. In contact person view the telephone field column sometimes allowing to add data ,sometimes it's not allowing data which results an error in conversion program saying that the telephone field in not an input field. I don't know why the view is showing the telephone field like that.
Can any one suggest the solution for this problem. I know this is configuration problem with a view but i posted in ABAP forums.
Thanks

Hi Ben,
I assume that you are writing a BDC program to upload contact person information. If so, you are trying to populate a table control here. Please check to see if you are calculating the index to assign values to the correct rows.
if you are calculating index in your program then i think it should be configuration problem as you said.
Thanks,
Ganesh.

Problem with HTML viewer

Dear All ,
I am facing a problem with HTML Viewer . My senario is as follows :
1. I have created one HTML page . On that page there are 4 Images
2. I imported that HTML page in SAP with the help of transaction SMW0
3. I Called that HTML page in my ABAP program using the method "load_html_document" of class cl_gui_html_viewer
4. This is happening perfectly ok on the machine on which all this developement was done.
But the issue is when I execute my ABAP program on a different machine , those Images on that HTML page are not displaying.
Can you please guide me how to remove that machine dependancy?
Regards,
Nikhil

Hi Nikhil,
Please check if the image is properly imported properly. Also check if there is any option which you might have forgotten while imported like dependeency.
Regards
Abhii...

Problem with Materialized Views after an export

Hi @ everybody,
At an Oracle 11g R2 (11.2.0.3.0) instance, all actual CPU's/SPU's are installed, on a Red Hat 6 Machine i have a problem with Materialized Views from a schema, which i have exportet from an old database machine on Oracle 10g (10.2.0.1.0) to the new machine.
I've exportet with the old exp and imported with imp, because i know, that i get some strange errors because of the materialized views when i'm using the new expdp and impdp tools.
At the old machine the materialized views are so programmed, that they get an update of data at a defined time like this:
START WITH TRUNC(SYSDATE) + 21/24
      NEXT SYSDATE+1
...But after the export this "update function" of the materialized view is not available. So i have deleted that views and recreated them with the START WITH parameters. So now they are running.
But why do i have this problem?
Is this "START WITH" somewhere written as a job or so in, for example, DBMS_SCHEDULER or something else? So i had forgotten to export these jobs or where is that defined?
Is this a bug?
Thanks for answers and help!
Best regards,
David

I can't remember the error of expdp/impdp. That is some days ago, i have to rebuild this.
I think in my scenario for the import i don't need the TABLE_EXISTS_ACTION, because by importing at the new server i've just createt the naked tablespace for the data and the users, not more. So he didn't has something to overwrite.
And i have to tell you: i'm just the dbA. The desining of the tables and materialized views is many years ago by installing the old server. I'm just to young in my company to know about the design of the instance and why it was designed so.
Anyway: my problem is, that after the import of the schemas to a new server the "START WITH" option in the materialized views is not there anymore and i just want to why so i can think about a solution for that and create it with the database designers of my company.
EDIT: And here are the SQL Statements for creating the Materialized Views:
First, at the OLD Server (Oracle 10g 10.2.0.1.0)
CREATE MATERIALIZED VIEW "DUPONT_CCG2_P"."PR_PRODUCT_ITEMS"
ORGANIZATION HEAP PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "DUPONT_14523"
BUILD IMMEDIATE
USING INDEX
REFRESH COMPLETE ON DEMAND START WITH sysdate+0 NEXT SYSDATE+1
USING DEFAULT LOCAL ROLLBACK SEGMENT
DISABLE QUERY REWRITE
AS (SELECT DISTINCT
      PR_CUSTOMER_MASTER_DATA.CLIENT_ID,
      PR_CUSTOMER_MASTER_DATA.ILN_USER,
      PR_ARTICLE.EAN,
      PR_ARTICLE.CODE,
      PR_USED_ARTICLE_TEXT.ARTICLE_TEXT,
      PR_USED_ARTICLE_TEXT.LANG_CODE,
      PR_ARTICLE.SUP_ITEM_NO,
      PR_ARTICLE.OLD_ITEM_NO,
      PR_COMPANY_ITEM_MATCH.ITEM_BY_NO,
      PR_COMPANY_ITEM_MATCH.UOM_UNIT,
      PR_COMPANY_ITEM_MATCH.PRICE_UOM,
      PR_COMPANY_ITEM_MATCH.PRICE,
      PR_COMPANY_ITEM_MATCH.CURRENCY,
      PR_COMPANY_ITEM_MATCH.PRICE_QTY,
      PR_COMPANY_ITEM_MATCH.SALES_UNIT,
      PR_COMPANY_ITEM_MATCH.START_DATE,
      PR_COMPANY_ITEM_MATCH.END_DATE,
      PR_ARTICLE.UPDATED_AT
        FROM PR_ARTICLE, PR_COMPANY_ITEM_MATCH, PR_USED_ARTICLE_TEXT, PR_CUSTOMER_MASTER_DATA, PR_ADDRESS
        WHERE PR_ADDRESS.ORDER_TYPE='REP'
      AND PR_CUSTOMER_MASTER_DATA.ILN_USER=PR_ADDRESS.ILN_USER
      AND PR_COMPANY_ITEM_MATCH.ILN_USER=PR_ADDRESS.ILN_LINK
      AND PR_CUSTOMER_MASTER_DATA.SALES_ORG=PR_COMPANY_ITEM_MATCH.SALES_ORG
      AND PR_CUSTOMER_MASTER_DATA.CLIENT_ID=PR_COMPANY_ITEM_MATCH.CLIENT_ID
      AND PR_CUSTOMER_MASTER_DATA.CLIENT_ID=PR_ADDRESS.CLIENT_ID
      AND PR_ARTICLE.SUP_ITEM_NO=PR_COMPANY_ITEM_MATCH.SUP_ITEM_NO
      AND PR_COMPANY_ITEM_MATCH.SALES_ORG=PR_USED_ARTICLE_TEXT.SALES_ORG
      AND PR_ARTICLE.SUP_ITEM_NO=PR_USED_ARTICLE_TEXT.SUP_ITEM_NO
      AND PR_CUSTOMER_MASTER_DATA.LANG_CODE=PR_USED_ARTICLE_TEXT.LANG_CODE
      AND ( PR_COMPANY_ITEM_MATCH.END_DATE IS NULL OR to_date(PR_COMPANY_ITEM_MATCH.END_DATE,'YYYYMMDD') - sysdate > 0)
      AND ( PR_COMPANY_ITEM_MATCH.START_DATE IS NULL OR sysdate - to_date(PR_COMPANY_ITEM_MATCH.START_DATE,'YYYYMMDD') > 0)
)And here the at the NEW Server (Oracle 11g R2 11.2.0.3.0)
CREATE MATERIALIZED VIEW "DUPONT_CCG2_P"."PR_PRODUCT_ITEMS" ("CLIENT_ID", "ILN_USER", "EAN", "CODE", "ARTICLE_TEXT", "LANG_CODE", "LANR", "OLD_LANR", "ITEM_BY_NO", "UOM_UNIT", "PRICE_UOM", "PRICE", "CURRENCY", "PRICE_QTY", "SALES_UNIT", "START_DATE", "END_DATE", "UPDATED_AT")
ORGANIZATION HEAP PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255
NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1
BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT)
TABLESPACE "DUPONT_14523"
BUILD IMMEDIATE
USING INDEX
REFRESH COMPLETE ON DEMAND START WITH sysdate+0 NEXT SYSDATE+1
USING DEFAULT LOCAL ROLLBACK SEGMENT
USING ENFORCED CONSTRAINTS DISABLE QUERY REWRITE
AS (SELECT DISTINCT
      PR_CUSTOMER_MASTER_DATA.CLIENT_ID,
      PR_CUSTOMER_MASTER_DATA.ILN_USER,
      PR_ARTICLE.EAN,
      PR_ARTICLE.CODE,
      PR_USED_ARTICLE_TEXT.ARTICLE_TEXT,
      PR_USED_ARTICLE_TEXT.LANG_CODE,
      PR_ARTICLE.SUP_ITEM_NO,
      PR_ARTICLE.OLD_ITEM_NO,
      PR_COMPANY_ITEM_MATCH.ITEM_BY_NO,
      PR_COMPANY_ITEM_MATCH.UOM_UNIT,
      PR_COMPANY_ITEM_MATCH.PRICE_UOM,
      PR_COMPANY_ITEM_MATCH.PRICE,
      PR_COMPANY_ITEM_MATCH.CURRENCY,
      PR_COMPANY_ITEM_MATCH.PRICE_QTY,
      PR_COMPANY_ITEM_MATCH.SALES_UNIT,
      PR_COMPANY_ITEM_MATCH.START_DATE,
      PR_COMPANY_ITEM_MATCH.END_DATE,
      PR_ARTICLE.UPDATED_AT
        FROM PR_ARTICLE, PR_COMPANY_ITEM_MATCH, PR_USED_ARTICLE_TEXT, PR_CUSTOMER_MASTER_DATA, PR_ADDRESS
        WHERE PR_ADDRESS.ORDER_TYPE='REP'
      AND PR_CUSTOMER_MASTER_DATA.ILN_USER=PR_ADDRESS.ILN_USER
      AND PR_COMPANY_ITEM_MATCH.ILN_USER=PR_ADDRESS.ILN_LINK
      AND PR_CUSTOMER_MASTER_DATA.SALES_ORG=PR_COMPANY_ITEM_MATCH.SALES_ORG
      AND PR_CUSTOMER_MASTER_DATA.CLIENT_ID=PR_COMPANY_ITEM_MATCH.CLIENT_ID
      AND PR_CUSTOMER_MASTER_DATA.CLIENT_ID=PR_ADDRESS.CLIENT_ID
      AND PR_ARTICLE.SUP_ITEM_NO=PR_COMPANY_ITEM_MATCH.SUP_ITEM_NO
      AND PR_COMPANY_ITEM_MATCH.SALES_ORG=PR_USED_ARTICLE_TEXT.SALES_ORG
      AND PR_ARTICLE.SUP_ITEM_NO=PR_USED_ARTICLE_TEXT.SUP_ITEM_NO
      AND PR_CUSTOMER_MASTER_DATA.LANG_CODE=PR_USED_ARTICLE_TEXT.LANG_CODE
      AND ( PR_COMPANY_ITEM_MATCH.END_DATE IS NULL OR to_date(PR_COMPANY_ITEM_MATCH.END_DATE,'YYYYMMDD') - sysdate > 0)
      AND ( PR_COMPANY_ITEM_MATCH.START_DATE IS NULL OR sysdate - to_date(PR_COMPANY_ITEM_MATCH.START_DATE,'YYYYMMDD') > 0)
)The own differences i can see is at the "header". In the new one is the NOCOMPRESS LOGGING Option and in the first line the code has the columns diretcly defined.
But, i think, for my problem this line is determining:
REFRESH COMPLETE ON DEMAND START WITH sysdate+0 NEXT SYSDATE+1And this line is the same at both server.
Edited by: David_Pasternak on 12.04.2013 00:06

Problem with program hanging randomly on certain commands from win 7 pro client to SB Server

Having a problem with program hanging randomly on certain commands from Win-7 Pro Client to SB Server Both 64-Bit
Five other slower XP-Pro 32 Bit systems though they are older and slower systems do not seem to hang as readily if at all.
It has been very frustrating as the Client-System, SB-Server and Program should work w/o any hitches, but this seems to work fine @ times and then hang randomly.
Would appreciate any and all suggestions in assisting.... JimBAgde-MSS

You can try this, as I have had similar problems with another MS Access .MDB file and slow access before. This fixed my problem for me. On the slow computer, make sure the program is set to see the .mdb file via UNC path, not a mapped drive letter. ex.
USE: \\yourserver\shared\dental\file.mdb
DO NOT: S:\\shared\dental\file.mdb
hope this helps

I have ipad 2 and facing problem with programs swtching off

I have ipad 2 and facing problem with programs it's swtching off while working and turn to home page. Am using ios 5

If it's happening on all the apps that you've downloaded from the App Store, but not the Apple built-in ones, then try downloading any free app from the store (as that appears to reset something) and then re-try them - the free app can then be deleted.
If it's happening on all apps then try closing them all completely and then see if they work when you re-open them : from the home screen (i.e.not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Problems with Street View

new street view from new google map release shows black screen

I'm having similar problems with Street View on openSUSE. For the time being you can try to switch back to the classic Google Maps.
https://support.google.com/maps/answer/3045828?hl=en&ref_topic=3093612

Lightroom 4.2 - Experiencing problems with images viewed on 2nd monitor

Hi All,
This problem seems to have started with my updating from 4.1 to 4.2. I have my second monitor set as Loupe - Normal and Fit. As I crop an image on my main monitor, the 2nd monitor view does not always change to the cropped view. If I switch to a different photo and then back to the one I just cropped, the 2nd monitor view will then show the cropped image, but it is almost always blurry. Sometimes I can click the image in the 2nd monitor view to change to a 1:1 view and it will look sharp, and then click again back to Fit and then it too will be sharp. Other times I get a message in the 2nd monitor view that says "no image selected" and bouncing back and forth between a different image will correct this.
This all started off with the majority, but not all cropped images showing as blurred and progressed to what I have described above. I seriously though I had a focus problem with my camera!
Is anyone else experinecing this since updating? Suggestions?
Below is the suggested information to provide...
What version of Lightroom? 4.2
Have you installed the recent updates? Yes, 4.2
What operating system? Windows 7 Ultimate 64 bit
What kind(s) of image file(s)? All images are converted to .dng upon import
If you are getting error message(s), what is the full text of the error message(s)? No error messages.
What were you doing when the problem occurred? I am in the develop module cropping images etc.
What other software are you running? Silver Efex Pro 2, but I have had that installed in many prior versions of Lightroom
Tell us about your computer hardware. How much RAM is installed? 32 GB - Yes, I know - overkill...
How much free space is on your system (C:) drive? 119 GB of 223 GB of my solid state drive c:\
Has this ever worked before? Yes
If so, do you recall any changes you made to Lightroom, such as adding Plug-ins, presets, etc.? No other changes other than updating to 4.2
Did you make any changes to your system, such as updating hardware, printers or drivers, or installing/uninstalling any programs? No, no other changes.
Thanks!

Same problem. Not a soloution, but this may be relevant.
http://forums.adobe.com/message/4782916#4782916
Alan

Problem with Mega View 561

I'm Italian. Sorry for my english; I hope to be comprensible.
I've just got a Mega View 561, but I had a problem with it.
Now it don't start anymore.
In the manual I read that there should be a restore CD-ROM in the package supplied with the Mega View, but i didn't find it.
I also didn't find a mail address able to connect directly the support in MSI, also in the Internet site.
Could someone help me in some way?
Thanks a lot

Bongiorno,
Try and look if what you need is here.
http://www.msi.com.tw/program/support/download/dld/spt_dld_detail.php?UID=604&kind=6
If not:
[email protected]

Problem with 2 View Objects based on One Entity -Probably a Bug in ADF BC

Hi
I am using JDeveloper 10.1.3(SU5) and adf faces and ADF BC and to explain my problem I use HR schema.
First, I created 2 view objects based on countries table named as TestView1 and TestView2. I set TestView1 query where clause to region_id=1 and TestView2 query where clause to region_id!=1 in the view object editor and then I created 2 separated form on these 2 view objects by dragging and dropping from data control palette.
Now when I insert a record in the form based on TestView1 with region_id set to 1 and commit the record and go to the next form I can see the record in the second form which is completely wrong since it is against the where clause statement of the second form.
I am really confused and the situation is very wired and it seems to me something like bug in adf bc.Am I right.Is there any work around or solution for solving this problem.
Any help would be highly appreciated.
Best Regards,
Navid

Dear Frank,
Thank you very much for your quick response.
Reading your helpful comments now I have some questions:
1- I have commited the record in the database so shouldn't the query of view objects be re-queried?
2- We try to use ClearVOCaches (entity_name,false) in afterCommit of the base entity object but unfortunately it does not work correctly. after that,We got root app module and used findViewObject method to find all the view of that entity (we have found them by using name not automaticlly) and called executeQuery of all views. From my point of view it has 2 big disadvantages. First suppose that this entity is an important entity and 4 or 5 viow objects are based on it. Now, For inserting one record we should re-execute 4 or 5 view which I think makes some performance issues. Besides, If during the development one programmer add a new view object based on this entity and don't add the executeQuery in the afterCommit for this view, again we have the same problem. Isn't there at least a way that automatically refresh all related view objects however the performance issue still exists.
3- You mentioned that this issue is handled in the developer guide. Could you kindly give me a refrence which developer guide you mean and which section I should read to overcome this problem.(I have ADF Developer's Guide for Forms/4GL Developer's Guide , however I search for clearVOCaches and surprisingly nothing was found!!!)
4- Could you please give me some hints that from your point of view what is the best method to solve this problem with minimum performance effect.
Any comment would be of some great help.
Thanks in advance,
Navid

Lots of problems with program

Guys,
I really am having a lot of problems with a program. I got the program to compile but it looks absolutely nothing like it is supposed to look. I have a deadline for tomorrow and sent my teacher an email but the chances of him getting back to me by tomorrow night for a weekend is pretty much slim to none. Anyways I am sending my output and if anyone could give me advice or feedback on why it does not look right if it is something small and if its alot of things go ahead and call me dumb.
here is my code:
import javax.swing.JOptionPane;
import java.awt.*;
import java.awt.event.*;
public class Checkerboard extends Frame implements ActionListener
     private Panel topPanel;
     private TextArea topDisplay[];
     private Panel bottomPanel;
     private TextField startField = new TextField(10);
     private TextField stopField = new TextField(10);
     private TextField stepField = new TextField(10);
     private Label startLabel = new Label ("Start");
     private Label stopLabel = new Label ("Stop");
     private Label stepLabel = new Label ("Step");
     private Button goButton;
     private Button clearButton;
     private boolean clearText;
     private boolean first;
     private int start;
     private int stop;
     private int step;
     //constructor methods
     public Checkerboard()
          //construct components and initialize beginning values
          topPanel = new Panel();
          topDisplay = new TextArea[16];
          goButton = new Button("Go");
          clearButton = new Button("Clear");
          first = true;
          bottomPanel = new Panel();
          int start = 0;
          int stop = 0;
          int step = 0;
          bottomPanel.add(startField);
          bottomPanel.add(stopField);
          bottomPanel.add(stepField);
          bottomPanel.add(startLabel);
          bottomPanel.add(stopLabel);
          bottomPanel.add(stepLabel);
          bottomPanel.add(goButton);
          goButton.addActionListener(this);
          bottomPanel.add(clearButton);
          clearButton.addActionListener(this);
          clearText = true;
          //set layouts for the Frame and Panels
          setLayout(new BorderLayout());
          topPanel.setLayout(new GridLayout(4, 4, 10, 10));
          bottomPanel.setLayout(new GridLayout(3, 3, 5, 5));
          //construct the Display
          for(int i = 1; i <= 15; i++)
                    topDisplay[i] = new TextArea(null, 3, 5, 3);
          //set color to the panel
          //row 1
          for(int x = 1; x <= 4; x++)
          //set color for
          setBackground(Color.white);
          //row 2
          for(int x = 5; x <= 8; x++)
          //set color for
          setBackground(Color.white);
          //row 3
          for(int x = 9; x <= 12; x++)
          //set color for
          setBackground(Color.white);
          //row 4
          for(int x = 13; x <= 16; x++)
          //set color for
          setBackground(Color.white);
          //add components to frame
          add(topPanel, BorderLayout.NORTH);
          add(bottomPanel, BorderLayout.CENTER);
          //allow the x to close the application
          addWindowListener(new WindowAdapter()
                    public void windowclosing(WindowEvent e)
                              System.exit(0);
               } //end window adapter
     public static void main(String args[])
          Checkerboard f = new Checkerboard();
          f.setTitle("Checkerboard Array");
          f.setBounds(50, 100, 300, 400);
          f.setLocationRelativeTo(null);
          f.setVisible(true);
     } //end main
     public void actionPerformed(ActionEvent e)
          //convert data in TextField to int
          int start = Integer.parseInt(startField.getText());
          int stop = Integer.parseInt(stopField.getText());
          int step = Integer.parseInt(stepField.getText());
          for(int i = 1; i <=16; i++)
          setBackground(Color.blue);
          for(int i = start; i <= stop; i++)
          setBackground(Color.yellow);
          //test clear
          String arg = e.getActionCommand();
          //clear button was clicked
          if(arg.equals("Clear"))
               clearText = true;
               start = 0;
               stop = 0;
               step = 0;
               first = true;
               setBackground(Color.white);
               startField.requestFocus();
          } //end the if clear
     }//end action listener
}//end classThis will incorporate arrays, for loops, and Frames all in one.
Create a panel containing an array of 16 TextArea components that change color to correspond with the start, stop, and step values entered by the user. Perform the following tasks to create the Checkerboard Array application shown below. When the user enters the start, stop, and step fields and then clicks the Go button, the results are also shown below.
1.     Call your application Checkerboard.java
2.     You will need the following variables� declare them as private:
a.     16 component TextArea array
b.     a Panel to hold the array
c.     3 TextField components with length of 10
d.     3 int variables to receive the start, stop, and step values
e.     3 Labels to display the words Start, Stop, and Step
f.     a Go button
g.     a Clear button
h.     a Panel to hold the 3 TextFields, 3 Labels, and the 2 Buttons
3.     Create a constructor method to:
a.     construct each of the components declared above and initializes the start, stop, and step variables to zero (when constructing the TextArea components, use the following parameters: null, 3, 5, 3)
b.     set the Frame layout to BorderLayout
c.     write a for loop to loop the array and set each of the 16 TextArea components in that array so they cannot be edited. In the same loop, set each of the TextArea components text to be 1 more than the index number. Also in this same loop, set the background of each of the TextArea components to white.
d.     set the Panel for the TextArea components to GridLayout with 4 rows, 4 columns, and both gaps set to 10
e.     set the Panel for the TextFields, Labels, and button to GridLayout with 3 rows, 3 columns, and both gaps set to 5
f.     add the components to their respective Panels
g.     make the buttons clickable
h.     place the Panels in the Frame� put one in the NORTH and one in the CENTER
i.     Enter the addWindowListener() method described in the chapter� this is the method that overrides the click of the X so it terminates the application
4.     In your actionPerformed() method:
a.     convert the data in your TextFields to int and store them in the variables declared above
b.     write a loop that goes through the array setting every background color to blue
c.     write another loop that�s based on the user inputs. Each time the loop is executed, change the background color to yellow (so� start your loop at the user�s specified starting condition. You�ll stop at the user�s specified stopping value. You�ll change the fields to yellow every time you increment your loop based on the step value. REMEMBER: Your displayed values are 1 off from your index numbers!!)
5.     Write a main() method that creates an instance of the Checkerboard Frame.
a.     set the bounds for the frame to 50, 100, 300, 400
b.     set the title bar caption to Checkerboard Array
c.     use the setVisible() method to display the application Frame during execution
6.     After you get all of this complete, include error handling to make sure:
a.     the values entered in the TextFields are valid integers
b.     the start value is greater than or equal to 1 and less than or equal to 16
c.     the stop value is greater than or equal to 1 and less than or equal to 16
d.     the step value is greater than or equal to 1 and less than or equal to 16
e.     the start condition is less than the stop condition
f.     when an error occurs, give an error message in a dialog box that is specific to their error, remove the text from the invalid field, and put the cursor in that field so the user has a chance to re-enter� this can be accomplished by using multiple try/catch statements
g.     only change the colors if the numbers are valid
7.     Create a clear button as seen in the example below. This button should:
a.     clear out all 3 TextFields
b.     change the background color of all TextArea array elements to white
c.     put the cursor in the start field
8.     Document!!
I know you guys are probably busy with your own stuff but any help and I would certainly appreciate it

got the yellow boxes to come up but just one box.....so is there something wrong with my yellow set background because I am not seeing any more errors
//packages to import
import javax.swing.JOptionPane;
import java.awt.*;
import java.awt.event.*;
public class Checkerboard extends Frame implements ActionListener
     private Panel topPanel;
     private TextArea topDisplay[];
     private Panel bottomPanel;
     private TextField startField = new TextField(10);
     private TextField stopField = new TextField(10);
     private TextField stepField = new TextField(10);
     private Label startLabel = new Label ("Start");
     private Label stopLabel = new Label ("Stop");
     private Label stepLabel = new Label ("Step");
     private Button goButton;
     private Button clearButton;
     private boolean clearText;
     private boolean first;
     private int start;
     private int stop;
     private int step;
     //constructor methods
     public Checkerboard()
          //construct components and initialize beginning values
          topPanel = new Panel();
          topDisplay = new TextArea[16];
          goButton = new Button("Go");
          clearButton = new Button("Clear");
          first = true;
          bottomPanel = new Panel();
          int start = 0;
          int stop = 0;
          int step = 0;
          bottomPanel.add(startField);
          bottomPanel.add(stopField);
          bottomPanel.add(stepField);
          bottomPanel.add(startLabel);
          bottomPanel.add(stopLabel);
          bottomPanel.add(stepLabel);
          bottomPanel.add(goButton);
          goButton.addActionListener(this);
          bottomPanel.add(clearButton);
          clearButton.addActionListener(this);
          clearText = true;
          //set layouts for the Frame and Panels
          setLayout(new BorderLayout());
          topPanel.setLayout(new GridLayout(4, 4, 10, 10));
          bottomPanel.setLayout(new GridLayout(3, 3, 5, 5));
          //construct the Display
          for(int i = 0; i <= 15; i++)
                    topDisplay[i] = new TextArea(null, 3, 5, 3);
                    topDisplay.setText(String.valueOf(i+1));
                    topDisplay[i].setEditable(false);
                    topPanel.add(topDisplay[i]);
          //add components to frame
          add(topPanel, BorderLayout.NORTH);
          add(bottomPanel, BorderLayout.CENTER);
          //allow the x to close the application
          addWindowListener(new WindowAdapter()
                    public void windowClosing(WindowEvent e)
                              System.exit(0);
               } //end window adapter
          public static void main(String args[])
                    Checkerboard f = new Checkerboard();
                    f.setTitle("Checkerboard Array");
                    f.setBounds(50, 100, 300, 400);
                    f.setLocationRelativeTo(null);
                    f.setVisible(true);
               } //end main
               public void actionPerformed(ActionEvent e)
                    boolean done = false;
                    //test go
                    String arg = e.getActionCommand();
                    //go button was clicked
                    if(arg.equals("Go"))
               //convert data in TextField to int
               int start = Integer.parseInt(startField.getText());
               int stop = Integer.parseInt(stopField.getText());
               int step = Integer.parseInt(stepField.getText());
               while(!done)
                    try
                         if((start <= 1) && (start > 16)) throw new NumberFormatException();
                         else done = true;
                    } //end try
                    catch (NumberFormatException f)
                         JOptionPane.showMessageDialog(null, "You must enter start between 1 and 16", "Error", JOptionPane.ERROR_MESSAGE);
                         startField.setText(" ");
                         startField.requestFocus();
                    } //end catch
                    try
                         if ((stop < 1) && (stop > 16)) throw new NumberFormatException();
                         else done = true;
                    } //end try
                    catch (NumberFormatException f)
                         JOptionPane.showMessageDialog(null, "You must enter stop between 1 and 16", "Error", JOptionPane.ERROR_MESSAGE);
                         stopField.setText(" ");
                         stopField.requestFocus();
                    } //end catch
                    try
                         if ((step < 1) && (step > 16)) throw new NumberFormatException();
                         else done = true;
                    } //end try
                    catch (NumberFormatException f)
                         JOptionPane.showMessageDialog(null, "You must enter step between 1 and 16", "Error", JOptionPane.ERROR_MESSAGE);
                         stepField.setText(" ");
                         stepField.requestFocus();
                    } //end catch
                    try
                         if (start > stop) throw new NumberFormatException();
                         else done = true;
                    } //end try
                    catch (NumberFormatException f)
                         JOptionPane.showMessageDialog(null, "Stop cannot be larger than start", "Error", JOptionPane.ERROR_MESSAGE);
                         startField.setText(" ");
                         stopField.setText(" ");
                         stepField.setText(" ");
                         startField.requestFocus();
                    } //end catch
          } //end while
                    for(int i = 0; i <=15; i++)
                    topDisplay[i].setBackground(Color.blue);
                    for(int i = start; i <= stop; step++)
                    topDisplay[i].setBackground(Color.yellow);
               } //end the if go
               //clear button was clicked
               if(arg.equals("Clear"))
                    clearText = true;
                    startField.setText("");
                    stopField.setText("");
                    stepField.setText("");
                    first = true;
                    setBackground(Color.white);
                    startField.requestFocus();
               } //end the if clear
     }//end action listener
}//end class

Problem with creating/viewing PDF's from InDesign CS3

I have a problem with our PDF workflow and just cannot seem to resolve it.
The problem is as follows: My coworker and I (both designers running CS3 on iMac's running 10.5.6 Leopard) work daily on producing documents and graphic layouts.
Internally we can view and print PDF documents we create just fine with no troubles with the exception of our supervisor, who is running a mac with Tiger operating system. Our office environment is both Mac and PC. On may occasions he cannot print PDF's we create. Many times his prints will contain garbled characters, drop italics and formatting, replace fonts, or just print slowly.
This problem is also happening to our editor who is offsite. This is a fairly serious problem for her, considering her job relies heavily on being able to view and open PDF files we create. She was able to send a PDF file which shows the garbled mess her printer spit out when she printed. Apparently there were pages upon pages of messy garbled text. When documents do print from her, they are usually very slow in printing, taking up to a minute or more to print each page.
The sample of what she sent me is attached, and can also be found on my MobileMe iDisk at: http://public.me.com/rlcollier (document entitled Print Results.PDF)
My question really to the community is obviously what might be causing these problems. Its very frustrating not being able to determine if its something we're doing ourselves thats causing some incompatability or corruption in these files, or if its the users systems themselves. I can say that Debra our editor has can have a garbled mess of a 4 page file from us, and then turn around and print a graphic heavy 90 page PDF with ease from Boeing. Our PDF's seem to be the only ones she struggles with. That being said, my inclination is that its something on our end.
Any ideas of where to start looking? Any help at all would be greatly appreciated and welcomed. Thanks!

I currently had our editor test printing of some of our files using both Foxit and Adobe Reader (as was suggested) in order to see if either made a difference in her printing ability and here is what she came back with:
I tried to print out both these pdfs (David's is the one you reworked and Lisa's HESSM-3, both sent yesterday).
With Adobe: David's first page printed quickly, but it had errors (part of his pants didn't print, and there's an arbitrary shaded box in the text). Page 2 didn't print--every time I tried it had a different "offending command" code. Printing Lisa's HESSM made it up to page 7 before problems showed up (stock photo only partially printed), and it stopped on page 8 (with the random "offending command" code).
With Foxit: Both David's and the HESSM pdfs printed completely and without error...but it took a long time. David's 2 pages took about 3 to 4 minutes, and HESSM's 16 pages took close to 20 minutes. The time is in the transfer of data to the printer; the physical printing goes pretty quickly.
I cant say that I believe email is the problem, although I cant rule it out. I've tested emailing vs. passing through our workgroup with my supervisor, and it does not make any difference in his ability (or lack of ability) to print our files. He was able to print to a different printer (an HP 4650 as opposed to a 4100) without troubles. He refuses to believe its a printer problem however because PDF files originating from our office are the only ones he has trouble with. Never has he had any trouble with a single PDF file produced from any other source. This is also the case for our editor who only has trouble with PDF files originating from either mine, or my coworkers systems.
PS: I've attached both files that were referenced by our editor above for viewing/testing.

Problem With Image View After Cropping

Hi All,
I have a problem when I try to crop an image in CS4. The crop tool works perfectly, however sometime the cropped image has parts of the image “out of line” I believe the problem is just with the view, not the actual file. I have saved the image and opened it in MS Picture Viewer and the image is perfect.
I was using Windows XP without a problem. I have only experienced this since I upgraded to windows 7 64 bit.
Below is a screen shot of the problem, not the bottom right of the image. Any suggestions please.
Thanks - Vicki

No, it was me. Feel free to review the thread history at this URL if you'd like: http://forums.adobe.com/message/4206899
Your display driver IS out of date. You really don't want the one from Microsoft's WHQL
If you would like to be able to use the OpenGL-specific features, listed on the page below, as well as not have display corruption, I recommend you update SPECIFICALLY to Catalyst 11.7 (which carries driver version 8.872). Anything up to 11.12 is probably okay, but 12.1 has some very specific problems with Photoshop. Several of us on the forum here have had particularly good, solid results from 11.7.
http://kb2.adobe.com/cps/405/kb405745.html
-Noel

Problem with Program RSEOUT00

Hi,
Im executing RSEOUT00 to process all outbound idocs with status 30. The problem is if I only have one idoc to be processed, the status remains 30 while if I have for example 5 outbound idocs, all idocs EXCEPT the last are processed. Processed Idocs would have status 03.
How come this report does not process the last IDOC? Is this a problem with selection parameters?
Thanks in advance.
Kenny
Message was edited by:
Kenny Martinez

Hi kenny,
What selection parameters you have given on screen?
You can give idoc number or time of change or msg type or execute in background setting some variants...
There is no chance to leave the last idoc unprocessed.
Try to execute once again.
There might b a chance, when you execute the program,last idoc might not be created.
Regards,
Ponraj.s.

HST60: Huge Performance Problem with VAPI Views

We are using a VAPI view (with instead-of-triggers) for a table with +/- 60 columns.
In this instead-of-trigger we call some functions to return constants and variables.
Using DML (for example a Update) on this view takes the Server 80 sec. CPU time.
Direct update on the table takes 0.2 secs. CPU time.
Assistance please cause we are planning to use VAPI views to populate a new database model with old Forms.
As I know in Oracle 7 there was a problem with code in triggers. I believe they were compiled each time they were called. And package onces !! MAybe has this something to do with it.
Thanks in advise,
M. Overdijk
null

Marc,
Thanks for the reply....
We are using 8.1.6 currently.
This is a problem of one my fellow developers. The problem is the update using the rowid. Headstart has a booster to customize a Designer module to not use this rowid.
Problem we have is we have a old Forms 4.5 application. We made a new server model along with cdm ruleframe. The old tables are dropped and the old forms now work with VAPI views......redericting the data the new tables.
Now we have (we think) the same problem wherefor Headstart has this above called booster.
Any solutions for us ??? Cause we don't want to change the old application forms (there are to much !!)
Our solution is to drop the instead of triggers and use some cev business rule to redirect the data...
Disadvantages:
1. some work to do
2. whern the old application is dropped we have to remove the cev rules.
Any other solutions

Problems with Program View

Similar Messages

Maybe you are looking for