Problems with project when switched from Labview 8.2.1 to Labview 10

Hi everyone,
I recently switched from Labview 8.2.1 to Labview 10.
Before I can run the project I get the error which you can see in the attachment.
(The project is running well in Labview 8.2.1)
I did already check if variables end with a space, but none of them are.
The variables are also without any slashes, so that couldn't be the problem either.
Does anybody has any idea what the problem can be, please let me know.
I hope to hear from some of you soon.
Regards,
Kenny
Attachments:
Error Labview 10.JPG ‏19 KB

Your other post in the other thread indicates you've looked at that thread. Based on that have you checked your variable names to see if any of them are multi-line? The error message is basically telling you that you have illegal characters. A carriage return (\r) or a new line (\n) is an illegal character.

Similar Messages

Sound problems with Yosemite when switching from internal speakers to earbuds

After upgrading to Yosemite on my Macbook Pro, when I switch from using the internal speakers for sound and plug in my (Apple) earbuds, the sound stops working. The sound also stops when I do the reverse and unplug my earbuds, nothing comes out of the internal speakers. The only way to restore sound is to go into System Preferences, Sound, and select the output device (internal speakers, earphones, etc..). Anyone else experiencing this problem after installing Yosemite, or know of a fix?

I have the same problem..
there is something else happened twice with me, I plugged my macbook with a HDMI cable to the TV, and everything was ok, until I closed the macbook (sleep mode), when I opened the mac again,, the sound has gone! No sound from TV or macbook,, the only solution is to "RESTART"

Markers on clips don't move with project when switching media drives

Here's an odd one. I'm editing a project in Premiere Pro CS6 and in order to avoid carrying drives back and forth between two editing locations, I cloned the footage drive and have one duplicate drive in each location. I'll call them location A and B.
I have no problem relinking clips when I move back and forth from location to location. That's all working great, as expected.
When I am reviewing clips at edit location A, I've been placing a marker on the hero moments to make them easier to find later when editing. The strange (or perhaps perfectly normal) thing is that when I move to edit location B and relink the clips, all of my markers that I made at location A are gone.
The same thing happens when creating markers on clips at location B. When I move to location A, the markers made at location A are there, but the new ones added at B are gone... until I return to location B.
In other words, it seems like markers are not saved as part of the project, but are saved within each clip file. If that's true, what I'm experiencing would make sense. Even though I'm relinking the clips when I change edit locations, the markers are part of the footage files on each of my duplicate drives and do not move with me when I change locations.
I just wanted to confirm this is "how premiere pro works," or see if there is a preference checkbox or workaround I'm not aware of. Maybe I've found a bug? If this is just how it is, I'll have to come up with an alternate way to mark footage I'm reviewing, or just move the drives with me when I move, which I'd love to avoid.
Thanks for any thoughs on this anyone has.
Billy Sheahan
Chicago, IL

Wes, my deepest apoligies for not responding to your kind answer sooner. I had moved on, thinking it was just one of those things, until another editor colleague of mine, found my original question recently and emailed me to find out if there was a solution.
It appears that even with Premiere Pro CC, copying the XMP sidecar files to the second media drive remains the answer. Sadly my editor friend did most of his pre-edit clip marking in one city and traveled several states away to begin the edit and when he arrived, all of his marks were, of course, not there.
It would be great if somehow the metadata could be tied to the project, rather than the sidecar XMP files. Perhaps not technically feesible, but it would certainly make more sense from an editing standpoint to not have to be copying sidecar files every time you move to a edit location with duplicate media drives.
I will most likely write a feature request to see if this can be achived in future versions of Premiere.
Thanks again for your support and reply.
Billy

Problems with email after switching from POP to IMAP

I recently switched from POP to IMAP settings on my MacBook Pro (OS X Yosemite 10.10.2). My email seems to time out and then my emails seem to disappear. Then I have to logout and re-launch every few minutes to keep seeing my emails. Everything seems to be working fine for my iPhone and it's IMAP settings. Any ideas anyone?

William Kucharski wrote:
V.K. wrote:
when an IMAP account is set to use IDLE (a desktop equivalent of push) the emails are pushed by the IMAP server to Mail as soon as they are received. when this happens no new mail sound is played.
That is incorrect.
well, it always worked this way for me on all my imap accounts (I have 4).
and I've seen lots and lots of posts describing the same behavior. I don't know what's going on in your case.
I have two email accounts, both use IMAP IDLE, and I get the new mail sound each and every time a new mail message is delivered to either.
So there's some other factor at work here.

Problem with sound when import from Premiere into After Effects

Hi!
I imported a sequence from a Premiere Pro project using File -> Import -> Adobe Premiere Project...
The video in the sequence showed up in the After Effects project as a composition. However, the composition did not include the sound from the sequence! Is there a way to keep the sound from the sequence upon import into After Effects?
Thanks

i`m sorry about the screenshot size, but i could only upload pics with 605 px width.
Nevertheless it seems that you saved my day. looks like it was all about the scale to framesize thing.
thank you so much!!!!

Problem with sqlplus when called from forms

Dear friends,
I have the following problem, we are using forms 10g and database 10g,we are using client_host command to call sqlplus from form and the query which is being run by sqlplus is supposed to take an input from the client and return results. there is no problem in that. but the problem is the sqlplus window opens only in minimized mode and the users wants it open in maximized mode by default.
this is the code i am using to do this
pat:='sqlplusw -s'||:global.text||'@i:\sqls\codewise.sql'
client_host(pat);
please help me
prawin

I'm not sure allowing end users access to a sqlplus session is such a good idea. A savvy user having a bad hair day and becoming disgruntled could wreak havoc on your database if he/she has the right permissions. Besides, I've heard rumors that Forms is really good at accepting user input, querying the database, and displaying the results :P

IP Cache problem with Safari when browsing from Google

I've been experiencing what appears to be an ARP Cache corruption problem when using Safari. It typically occurs when I've been browsing links off of a Google Search page. Tonight's specific example is where www.youtube.com is now resolved to wikipedia.com's ip address. The only way to fix the problem (short of a reboot) is to shut down the network interface and then restart (after waiting a few seconds)
This normally fixes the problem (which is why I think its the ARP cache.)

This sounds like it could be related to a problem between Safari 5's DNS prefetching and your router. It may be possible that your router is scrambling DNS replies. Could you try manually entering a known good DNS server like OpenDNS into your network prefs?

Problems with soundtrack when publishing from imovie to idvd

When I publish to file or idvd the sound track that is turned off in imovie will play on the published version. It doesn't play on imovie, but plays in background of any format that I publish the project in. How do I get rid of this background sound?

Thank you for the information.
The thing is that he sends me an iMessage, while I send out an SMS!
What I've done is: I have disabled his iMessage and mine too. Had them both enabled and then it was all fine!
Very strange but somehow it worked for me...
I hate the developers of IOS, at least they are better than the Android ones

HP officejet Pro 8500A - problem with wireless setup switching from ATT Uverse to Verizon FiOS

I had this all-in-one printer set up and working on wireless through ATT Uverse router in one city. just moved to another city and got Verizon FiOS. Now when I try to set up the wireless connection, the printer will connect to the router, but my computer cannot locate the printer. It gave a 169 IP address which doesn't seem right. I've tried uninstalling and reinstalling the printer software on my computer, but when going through setup on the computer, it can't find the printer automatically or by me typing in the IP address it shows on the printer. Not sure what I have done wrong.
This question was solved.
View Solution.

It is not connected to your router (indicated by the 169.254 IP address).
Let me know the model of your FIOS router (Rev D, E, etc).
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Naming Problems with EJB when accessing from WebApplication

Hi all,
I'm trying to deploy an application consisting of several stateless session beans, one message driven bean and a web application. Everything works fine, until I try to log in (webapp). Then I get the following error:
com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Path to object does not exist at ik, the whole lookup name is ik/sec/IKAuthenticationEJB.
So the lookup name ik/sec/IKAuthenticationEJB is used in the code, whereas the JNDI Name of the requested bean is
sap.com/Integrationkernel/IKAuthenticationEJB (As showed in the Admin Tool). I'm wondering why there is this "sap.com" as I choosed a different name for the provider (But the error remains even if I change it to "sap.com").
As I cannot find any information about the "NameNotFoundException" I just tried the following:
- add a "ejb-ref" section to web.xml
<ejb-ref>
     <ejb-ref-name>ik/sec/IKAuthenticationEJB</ejb-ref-name>
     <ejb-ref-type>Session</ejb-ref-type>
     <home>com.tsystems.ik.security.authentication.IKAuthenticationEJBHome</home>
     <remote>com.tsystems.ik.security.authentication.IKAuthenticationEJBRemote</remote>
     <ejb-link>sap.com/Integrationkernel/IKAuthenticationEJB</ejb-link>
</ejb-ref>
- add a web-j2ee-engine.xml to the Web Application:
     <web-j2ee-engine>
         <ejb-ref>
            <ejb-ref-name>ik/sec/IKAuthenticationEJB</ejb-ref-name>
            <jndi-name>sap.com/Integrationkernel/IKAuthenticationEJB</jndi-name>
        </ejb-ref>
     </web-j2ee-engine>
Does anybody know what to do? Did I declare the references in a wrong way?
Is there a complete API Javadoc available? I just found the very small one on SDN...
Thanks a lot,
Nadine

Hi Nadine,
in order to lookup ab EJB from a web component you have to declare an ejb reference (ejb-ref section) in the web.xml. The jndi name in the web-j2ee-engine.xml can be omitted if you are sure that the information provided by the "ejb-ref" section is sufficient to identify the EJB component.
From the example you wrote I see that the ejb-link element is not correct. According to the EJB 2.0 FR specification (Appendix B, page 518) "ejb-link element must be the ejb-name of an enterprise bean". Probably this inconsistent information misleads the EJB Container in resolving the right reference.
My advice is simply to omit this and leave the "home" and "remote" elements. They should be enough.
A hint: you can use the "lsn" shell command from the "naming" group to observe the JNDI tree on a particular server node.
I hope this will help you.
Best regards,
Svetoslav

HT204370 I downloaded an HD movie onto my laptop from i-tunes. It plays fine on my laptop, but when I plug in my HD projector, the movie quits. When I unplug the projector, the movie starts again. I have never had a problem with projecting an itunes mov

I downloaded an HD movie onto my laptop from i-tunes. It plays fine on my laptop, but when I plug in my HD projector, the movie quits. When I unplug the projector, the movie starts again. I have never had a problem with projecting an itunes movie before this. Someone told me that i-tunes changed something so that movies can no longer be projected. We have a home theatre and have watched movies this way quite regularly, so it would be a drag if Apple will prevent us from doing this in the future.

I don’t know about projection, but I’m unable to watch HD content in iTunes because my Apple 30-inch Cinema Display is not HDCP-compliant (which is part of an HD copy-protection scheme).
The other movies you’ve projected, were they HD as well? If not, it could be the same problem: your projector is not HDCP-compliant.

HT204150 I'm having problems with random contacts disappearing from icloud. I have a saved text from a contact that displays her info but when I look for her in contacts it's missing.

I'm having problems with random contacts disappearing from icloud. I have a saved text from a contact that displays her info but when I look for her in contacts it's missing.

It is locked to your sisters carrier.
She would have to ask her carrier if they unlock iPhones and if she qualifies for this service.

Hello I have a problem with facebook Messenger disappeared from my desktop iPod in the AppStore it says "open" does not respond when I press it. What should I do to download it? But I do not have it in AppStore it says that I have it: (

Hello I have a problem with facebook Messenger disappeared from my desktop iPod in the AppStore it says "open" does not respond when I press it. What should I do to download it? But I do not have it in AppStore it says that I have it: (

- Go to Settings>General>Usage>Storage>and under apps select FBM and try to delete it.
Next:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

Cisco ASA 5505 - problem with negotiating IP address from PPPoE

Hi all,
I have problem with negotiating IP address from PPPoE. There is following design: ISP providing vDSL ending on VDSL modem in bridge mode. Behind brigde modem is ASA 5505 terminting PPPoE on OUTSIDE. Everything works fine except negotiating IP address from PPPoE server.
I have configured ASA 5505 with (ASA Version 9.2(2)4) for PPPoE like this [1.]. But If i try to "show" IP address on OUTSIDE interface a get this [2.], ok strange but let's continue. If list "show vpdn pppinterface id 1" i get this [3.]. Seems that I got public IP addres what was right, but this IP address was not associated with interface OUTSIDE?
Well, if I set IP address manually like this [4.] and also set a default route everything works fine but what will happen when ISP change reservation for my IP address or default gateway.
I have tried different version of ASA OS like 8.4, 9.1 but without luck.
Can anybody help me. Thanks a lot.
Regards
Karel
[1.]
interface Vlan100
description >>VLAN pro pripojeni do internetu<<
nameif OUTSIDE
security-level 0
pppoe client vpdn group O2
ip address pppoe setroute
vpdn group O2 request dialout pppoe
vpdn group O2 localname O2
vpdn group O2 ppp authentication chap
vpdn username O2 password *****
interface Ethernet0/0
description >>uplink O2 vDSL<<
switchport access vlan 100
[2.]
ciscoasa(config-if)# show ip address vlan 100 pppoe
ciscoasa(config-if)# 0.0.0.0 255.255.255.255 on Interface: OUTSIDE
ciscoasa(config-if)# show interface vlan 100 detail
Interface Vlan2 "OUTSIDE", is up, line protocol is up
Hardware is EtherSVI, BW 100 Mbps, DLY 100 usec
        Description: >>VLAN pro pripojeni do internetu<<
        MAC address f44e.05d0.6c17, MTU 1492
        IP address unassigned
Traffic Statistics for "OUTSIDE":
        28 packets input, 1307 bytes
        31 packets output, 721 bytes
        0 packets dropped
      1 minute input rate 0 pkts/sec, 3 bytes/sec
      1 minute output rate 0 pkts/sec, 1 bytes/sec
      1 minute drop rate, 0 pkts/sec
      5 minute input rate 0 pkts/sec, 0 bytes/sec
      5 minute output rate 0 pkts/sec, 0 bytes/sec
      5 minute drop rate, 0 pkts/sec
Control Point Interface States:
        Interface number is 15
        Interface config status is active
        Interface state is active
[3.]
ciscoasa(config-if)# show vpdn pppinterface id 1
PPP virtual interface id = 1
PPP authentication protocol is CHAP
Server ip address is 88.103.200.41
Our ip address is 85.71.188.158
Transmitted Pkts: 20, Received Pkts: 16, Error Pkts: 0
MPPE key strength is None
MPPE_Encrypt_Pkts: 0, MPPE_Encrypt_Bytes: 0
MPPE_Decrypt_Pkts: 0, MPPE_Decrypt_Bytes: 0
Rcvd_Out_Of_Seq_MPPE_Pkts: 0
ciscoasa(config-if)# show vpdn session state
%No active L2TP tunnels
%No active PPTP tunnels
PPPoE Session Information (Total tunnels=1 sessions=1)
SessID TunID Intf     State       Last Chg
22298      2 OUTSIDE SESSION_UP 561 secs
[4.]
interface Vlan100
description >>VLAN pro pripojeni do internetu<<
nameif OUTSIDE
security-level 0
pppoe client vpdn group O2
ip address 85.71.188.158 255.255.255.255 pppoe setroute
route OUTSIDE 0.0.0.0 0.0.0.0 88.103.200.41 1

You're right that the ACL should not affect otherwise allowed communications to the interface address.
Try disabling the ip audit feature on your outside interface.
no ip audit interface OUTSIDE AP_OUTSIDE_INFO
no ip audit interface OUTSIDE AP_OUTSIDE_ATTACK

Having a problem with dates when I send my numbers doc to excel. dates are all out and that they have to cut and paste individual entries onto their spreadsheet. Any idea how I can prevent this

having a problem with dates when I send my numbers doc to excel. dates are all out and that they have to cut and paste individual entries onto their spreadsheet. Any idea how I can prevent this.
I'm using Lion on an MBP and Numbers is the latest version

May you give more details about what is wrong with your dates ?
M…oSoft products aren't allowed on my machines but I use LibreOffice which is a clone of Office.
When I export from Numbers to Excel and open the result with LibreOffice, the dates are correctly treated.
To be precise, dates after 01/01/1904 are correctly treated. dates before 01/01/1904 are exported as strings but, as it's flagged during the export process, it's not surprising.
Yvan KOENIG (VALLAURIS, France) mardi 3 janvier 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : http://public.me.com/koenigyvan
Please : Search for questions similar to your own before submitting them to the community
For iWork's applications dedicated to iOS, go to :
https://discussions.apple.com/community/app_store/iwork_for_ios

Problems with project when switched from Labview 8.2.1 to Labview 10

Similar Messages

Maybe you are looking for