Problems with PSE 10 when saving for the web.

I'm having problems saving for web with PSE 10. I edit in RAW, edit in PSE 10, save as Jpeg, resize and save for the web. Results are muddled and not sharp (looks cartoonish). Also, there is no metadata when you look at the image properties. I uninstalled the program and installed again. No change.

Are you resizing the photo before save for web?
What settings are you using in the save for web dialog for the jpeg quality?
If you compress the jpeg too much (low quality settings below 60), that can make your photos look bad.
And save for the web in pse 10 automatically strips any metadata in order to keep the file sizes smaller.
Also, the save for web in pse 10 has a bad habit of not remembering your last used settings, so it's good to verify that your actually set to jpeg instead of the default GIF setting.
Message was edited by: R_Kelly

Similar Messages

Disappearing color profile when saved for the Web

Hello.
I have a problem with the “Save for the Web” results using Photoshop CS6 running on Win 7 x64.
My photos are already in 8 bits and in sRGB and when I save for the Web I check the option “embed color profile”, uncheck “convert to sRGB”, metadata to “copyright and contact info”.
When I open the resulting photos in Photoshop, everything is fine as it recognizes the embedded color profile. Same thing when I open these files in Firefox, Safari or Chrome: the colors are correct.
Now, when I right-click on a file in the Win Explorer and look its properties, the line about the color profile is blank, as if there wasn't any. This doesn't bother me but the problem appears on my Website created with Joomla and using for the display a module, Responsive Image Gallery, which creates resized copies of the photos. At this point the copies have completely lost their color profile. I entered in contact with the module's support and they assured me that it preserves the embedded profile, so I come here to gather some information about how this “Save for the Web” embeds the color profile because may be I just didn't understand how it does and if it's different from the “Save as” way.
The fact I can't see the profile through the Win Explorer makes me think Joomla's module doesn't either.

Incredible how much gballard's site is famous! Lol. I use it for a while now and checked again right now with the three Web browsers and everything is all right.
As indicated in my first post, when saving for the Web I checked the “embed color profile” option. I already resized the file and converted it in sRGB first in Photoshop.
Yes it's pretty confusing to see some software not able to see the color profile when the file is saved with that option.
To illustrate, here are three screenshots from Windows' file browser => right-ckick on the file => properties => details:
Opening that “saved for the Web” file in PS, it's ok, the CP is recognized.
Opening it directly (from the file browser => “open with”) in Web browsers: ok in Firefox, Safari and Chrome (CP recognized in all).
Copying that file in my working site on localhost (no modification), integer it in Joomla's module gallery (which is CP aware) and then opening my site on localhost with Web browsers: ok in Firefox (because it considers a non-tagged file by default as beeing sRGB), NOT OK in Safari neither in Chrome.
Now, if I do the same with the “Save as” version of the file with embedded sRGB CP:
PS: ok
Opened directly in Web browsers: ok in the three cases
Opened in Web browsers through my Joomla site on localhost: OK IN ALL THREE BROWSERS
Good point gator_soup: I'll post a bug report. I'm new here on the forum and thought Adobe's staff would post here.

How do I avoid the dreaded "jaggies" when saving for the Web?

I created vector art in Illustrator, then saved the file as an .ai file.
Afterward, I chose "Save for Web," and exported the file as a .png file.
I placed the .png file at 100 percent into a Dreamweaver file.
The result is a file with jagged edges. How do I save the file to preserve the smooth vector look of the original file?
Thanks

Thanks, I followed your lead and changed the optimation to "Type," but I am still getting the jaggies:

How do I change the dpi setting when I am saving for the web?

I need to chnge the dpi setting from the default of 72 to 300 when saving for the web. How do I do that?

You go by pixel dimensions for the web because that's all that computer screens use.
dpi or rather ppi is a print specification.
In this example, Image > Image Size I have unchecked resampling and set the ppi to 300. You can see how small it's going to print on paper as opposed to maybe 100 ppi. It will still retain the same pixel dimensions.
You basically focus on a good pixel size for the the browser display.

I have a problem with itunes when I sync the saved music and want to sync my iphone 5 ios 7.0.6 no longer passes the music thing is that just stays on "waiting for sync" and not worry please help are more than 400 songs that do not want to hear who are wi

I have a problem with itunes when I sync the saved music and want to sync my iphone 5 ios 7.0.6 no longer passes the music thing is that just stays on "waiting for sync" and not worry please help are more than 400 songs that do not want to hear who are wi

Plawexki wrote:
... do you know if the contacts, photos, messages etc will be wiped?
Yes... Everything will be Wiped and Replaced with what is currently on Your Mac.
SYNCING with iTunes
See here > http://support.apple.com/kb/HT1386
From Here > http://www.apple.com/support/iphone/syncing/
You may find this information of interest...
Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And See Here...
How to Use Multiple iDevices with One Computer

Is there a way to stop colors flattening when encoding for the web and DVD

Hi. I am in post prod on my first feature film, which has some great horror dream sequences, lit red and green in the Mario Bava tradition. They really do look stunning in the original footage, with highly saturated crisp colors (We had a really great cinematographer) But when I try to create clips for the web, the colors flatten a lot. They look better on my i-phone than my Lcd computer monitor. doing DVD outputs also looses something, but less so. It depends on the playback equip. My plasma TV and upscaling dvd player make them look fairly good. The footage is progressive scan 25 frames per sec HD. (16:9 cropped to 2:35:1) Does anyone know the optimum settings for web encoding have just used 310x710 pixels using H264 compressor at 3000 kbts per sec

Hi
YEs you can read the ALE model data.
    CALL FUNCTION 'OWN_LOGICAL_SYSTEM_GET'
      IMPORTING
        own_logical_system             = sending_system
      EXCEPTIONS
        own_logical_system_not_defined = 01.
    SELECT   * FROM tbd05 INTO TABLE i_tbd05
    WHERE    sndsystem = sending_system
    AND      mestyp     = message_type.
Regards,
Vijay V

Hello, I have a problem with Firefox when I use the search option. Every time when I want to search for some info It will crash suddenly.. It happen most of the time when I try to search or google something.

using search or google something it will crash or closing unexpectedly

You are right, but how could i send it to Apple? when the phone company first replaced my iphone they had in stock alots of iphones and they just sent mine back to Apple and gave me a new one, so all i did is to give them my phone, but now how could i sent it to Apple? and i cant send it by myself, and the store wont do that, its a lost for them.. so sending it to Apple wasnt an option from the begining.
and for the record, i dont think the store where i bought it is an authorized shop.. its just a store who boughts phone's from Apple in a low price and sells it in much more money..

Problem with lowercase when saving in custom SAP table.

Hi Gurus,
I have a problem in saving entries in a custom table in SAP.
When I enter a name with combinations of upper and lower case in SE16, when saving, my entries were all converted into uppercase. That goes as well in passwords. That's my concern, how can I check passwords if combinations were disregarded?
My parameter fields for these were just type CHAR.
Is there a way I can save data as how they were entered?
Thank you in advance for your responses Gurus...

Hi,
Check the Domain of the field and select Lower case check box if it is a Zdomain or else create the new domain or check for one like this.For example..
Table PA0002 which has a field NACHN and Data element assigned to it is PAD_NACHN...double click on the Data element and now again double click on the Domain and now Under Ouput Characteristics check the Lower Case check.
And now database get's saved with what ever case you entered

Problem with generating a stub for a Web Service

I have written a WebService in Delphi that I wan't to call from Java using JDeveloper 9i Release 2. The Web-service works since I can call the webservice from Delphi but the generated java stub just looks like this:
public class ITempConverterserviceStub
public String endpoint = "";
private OracleSOAPHTTPConnection m_httpConnection = null;
public ITempConverterserviceStub()
m_httpConnection = new OracleSOAPHTTPConnection();
m_httpConnection.
I would expect some method declarations for the methods I want to call in my Webservice ?
Regards
Roger Gilliar

Hi
As told by Khaja, when generating DS for ODS the technical name will appear as prefix 8 with ODS technical name.
Check in DS's.
If you using BI7, then you have to change into BD1 client, then only you can able to view your DS.
Reg
Pra

Problem with oc4j when accessing over the host name?

Hi!
I have a standalone oc4j and application is working perfect when I use ip address of the server.
When I use dns name of the server I just can pass the login page and after that every jsp return me to the login page?
THANKS FOR A HELP!!!

The only way that we have found to work with DNS is to remove the redirects in the faces-config.xml navigation cases. If anyone finds a better resolution, please POST!

Problem with pages when it restores the windows

hi,
my problem is that when I open Pages', it says :
"application "Pages" has unexpectedly quit during the restoration of its windows. Would you like to try again to restore its windows?"
and after that it goes down. So I cant't use it.
I'm sorry if my English is not very good but the reason is that I'm french.
Looking for your answer , thank you for paying attention to my problem.
nicolas

Hello happy English users, I'm glad to meet a French asker.
So, I apologize but I will speak French.
Bonjour
Nicolas.
Nos hôtes américains sont habitués à ce que je répondes en Français aux questions posées par des francophones.
Quel est le système d'exploitation que vous utilisez et quelle est la version de Pages en service.
Donnez également le message exact en Français.
À plus.
Yvan KOENIG (VALLAURIS, France) dimanche 11 décembre 2011 14:52:18
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

Problem with my program looking for the settings file in the wrong folder

I have been writing a simple FTP file uploader, what I want to do is be able to select the files I want to upload in windows explorer and then right click and click the menu item and it launches the program and passes the files paths that I have selected to it.
So I use this in the windows registry "C:\Program Files\Java\jre1.6.0_03\bin\java.exe -jar D:\BenFTP\BenFTP.jar %1"
It launches fine and has no problem finding the files I want to upload. The problem is that it tries to look for the settings file in the same folder that the file I am try to upload is in. Which it's not suppose to do since the settings file is in the same folder that the .jar is in.
Edited by: ColNewman on Feb 5, 2008 6:55 PM

So, you're looking for your settings file in your current working directory. There's no way to set the CWD in your registry entry (is there?) so that isn't a practical thing to do. Presumably you're using a File object or a FileReader or something? Can't do that.
One alternative is to look for the settings file in the classpath. You can get a URL to a file in the classpath like this:URL settings = this.getClass().getResource("/settings.xml");Or you can get an InputStream to read the file by using the getResourceAsStream method. You would have to make sure that your executable jar file contained a Class-Path entry that specified the right directory, because the directory the jar is contained in isn't automatically in an executable jar's classpath.
Another alternative is to ask the user where the settings file is supposed to be, and put an entry in the Preferences (java.util.prefs) to remember that location.

HT5622 hi is there a problem with down loading apps for the i phone 4s

having a problem tring to down load apps is any bady having the same problem

Hello rooster1969,
I found an article with steps you can take when you are not able to connect to the iTunes Store. I recommend following the steps in the section titled "Troubleshooting on an iPhone, iPad, or iPod touch" in this article:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Thank you for using Apple Support Communities.
Best,
Sheila M.

A problem with middleware when i use the t-code   spro in erp .

HI everyone :
           Can i transfer the data from ERP to CRM automatic by middleware when i create a new entry use t-code spro in ERP .
          for example ,i create a new entry in table tvv5( the group5 ).
         thank you .

Hi,
Customizing data are never transferred automatically from ECC to CRM. The delta load is not valid for customizing objects.
However, a download object does exist for this table, namely object DNL_CUST_SALES. What you can do is schedule an initial load for this object to run periodically in the background.You simply need to schedule a job for program SMOF_DOWNLOAD. Or you can create a request using R3AR2, then schedule prgram SMOF_REQUEST to run as a background job to load this request. These are all the options available.
I hope this helps!
Brian.

I have a problem with itunes when I open the program can be heard three songs and stop listening to the song but follow

Besides this problem when I select another song's the same problem

Have you tried to click on "repair" and then try to uninstall the component?

Problems with PSE 10 when saving for the web.

Similar Messages

Maybe you are looking for