Problems with PSE 8.0 (Mac version)

Hi,
I have two problems regarding PSE and Adobe Customer Service.
First things first :
1. When I try to run successfully installed software I receive this error:
and I don't know what to do next. Im trying to run it on Leopard Snow.
2. I bought software from shop on adobe.com and when contacted with polish Adobe division (country I'm from) I was denied any customer assistance (even when they checked that this software is legit). They claim that I can only contact with american division. Is that right? I'm pretty much sure that I have right to call to the nearest customer service and ask for help - but maybe Im wrong.
Best regards
Sebastian Konkol

We use this forum for questions about the forum functionality itself, so you will likely receive little help here (in the Forum Comments area) on your problems...
Your question about the error in PSE8 can best be answered here:
http://forums.adobe.com/community/photoshop_elements
As for the problem with customer support, please check out this part of the forum please read/post your experience here:
http://forums.adobe.com/community/general/adobedotcom_feedback
Many people have been getting better responses when posting on a Facebook website dedicated to Adobe's Customer Service (or lack thereof).
Or when replying to the email in this letter: http://www.adobe.com/support/open_letter_to_adobe_customers/
Hope this helps
I did run across this post in the Creative Suites Forum, not sure if anything here will help...but it could point you in the right direction:
http://forums.adobe.com/thread/312902?tstart=0

Similar Messages

Help needed with PSE 9 Organizer - Mac Version

I downloaded the trial version of PSE 9 and when I created a Catalog of my existing pictures in the Organizer, all the pictures were duplicated in my hard drive, in a subfolder where the catalog was saved. I don't want duplicate pictures, is there a way to uncheck the "copy files on import" option when creating a new catalog in the Organizer? On my Mac, that option is greyed out in the "Get Videos and Photos" window and is set to "copy only". Is there another way to uncheck it?
Thanks,
Mike C.

Hi Mike,
PSE works with refrences to the files . The files are not duplicated on your system. The 'Copy Files on import option' comes to play and is enabled only when you are importing files present on external drives like CD/DVD/USB, etc. Then you have the option to either copy files to your hard drive or simply work with low resolution previews. Read more at http://don26812.wordpress.com/2010/01/24/handling-offline-media-on-cddvds-in-pses-organize r/ to know more about working with previews of files present on external drives.Hope that clears.
Thanks

I have a problem with iphoto (have a mac book pro): the icon in the dock appears with a question mark, and the application is gone!!! Can someone tell what's going on? Yesterday I had the same problem with itunes

I have a problem with iphoto (have a mac book pro): the icon in the dock appears with a question mark, and the application is gone!!! Can someone tell what's going on? Yesterday I had the same problem with itunes: I downloaded the last version (it's free), but I cannot do the same with iphoto, and more important: I need to know what is happening!!! Please help me!

Applications should not disappear all by themselves.
If they are then that coud indicate serious problems with your hard drive.
Backup everything up as quickly as possible.
Using Disk Utility verify your system disk.
Allan

Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)

Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)
I re set up my Airport network , having had 4 expresses for years doing a good job. I bought another and an express, but then a time capsule after my external drive died. .Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)
I moved house and have fibre network so 38mb/s - they all look ok on the utility, but its not till I saw the App version that they are not compatible as mac will not upgrade the version 6 ones, leaving me with 2 disjointed networks and 7 appliances, 4 of the old , 3 of the new.
my new house is expansive so i wanted the extended range and airplay in each room.
This is not told to customers, and utility doesnt show any issues.
I do not seem to get any range from either network now, - and I'm quite experienced with airport (6 yrs of setting up & using & extending)
Any advice ?
LJx
Message was edited by: LJLDN
Message was edited by: LJLDN

Sorry couldn't change the detonations to Airport and am new so cant delete!

Few problems with PSE 11

Hi everybody,
I have a problem with my PS Elements 11. I was working on trial and then decided to buy full version, however few things seems to work different than on my trial and I can't find solution.
1) When I copy one image to another it makes transparent layer on it altho capacity is set on 100% still. On my trial image copied or cuted to another pic was looking exactly as original and after I could lower transparency by lowering capacity.
2) When I want to use normal brush and make just one spot, or paint with one line not with a lot of points or other symbols. I thought aerograph function is the reason but it paints with it and normal the same (as many symbols)
3) When I select part of image with square selection tool it makes a circle with it or rounded field but somehow square selected image is finally copied. It seems it finds some borders on img by itself and changes selected square to it.
I would be very glad if someone could help me to resolve those issues. I will feel free to post others also if I they will come to my mind.
thanks!

Thank you for your information about my problem with PSE 11. I have since tried the programme on 2 different computers and it works fine. Seems like the problem is with my computer although my old PSE 10 works okay. I'd appreciate any ideas about what could be wrong with my computer to cause my photos to break up into various segments which don't join together particularly when I move them into 'before and after horizontal' or '......vertical' and even when zooming them. ( HP Pavilion Elite) Vista Ultimate.
Regards,
Stervogel.

Problem with photoshop on my mac

Hey...
I have some problem with photoshop on my mac...
When i open the photoshop my screen change his color...
The screen changes such delicate blue color.
and when i close the app the color has back to the original color.
photoshop cs 6 (master collection)
macbook pro 15"
OS X Mountain Lion
2.3 i7
4 giga ram
Have a nice day

Not sure which screen you mean, but maybe your seeing the Application Frame in photoshop cs6.
You can turn that off in photoshop cs6 under Window>Application Frame.
If that's not it, could you post a screenshot?

I have problem with starting up my Mac Pro ?

Dear ,
I'have a problem with starting up my Mac Pro , please advice me how to start it

This may help.
http://support.apple.com/kb/TS1365
Note: Steps 5 and 6
Step 5
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

Printing with PSE 8 for Mac

Hi,
hope some of you may give me some help.
Have tried to print with PSE 8 for Mac, but in the printing options there is none where i can choose the type of paper (ie: glossy, premium glossy....).
My printer is an Epson Stylus Photo 1400.
It works fine with iPhoto, here i can choose paper type. And prints come out fine.
Thanks for any advice,
dangerly

My printer is a Canon so not entirely sure if this helps but when I print from PSE 8 I do not get to choose the media type until I have clicked on the print button in the PSE dialog box. I am then presented with the dialog box for my printer where I can set the media type amongs other attributes.
It is normal for the media type to be the job of the printer driver so perhaps it is the same for your printer.
Jim Graham

TS3276 My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that o2 account (offline) my mac I have no problem with my iPhone or mac laptop. any suggestions please.

My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that o2 account (offline) my mac I have no problem with my iPhone or mac laptop. any suggestions please.

Sorry for the delay...
I did what you've told me, new account and manually copied my files from Time Machine. I had lots of permissions problems, but at the end, almost everything is in order... It seems it had to be with some of the Apple Preferences, but I can't be sure, as most of them were dumped to the trash can.
I still don't have my Mail Rules back, unfortunately, although I did goggled some. It is a pity, as I had around 30 or 40 of them, getting my mail in order to each of its mailboxes, but it is a small price as the rest doesn't show the before syntoms.
Thanks for the help, anyway!!

Why are there so many problems with the early 2008 Mac Pro ???

Hi everybody out there using Mac Pro's early 2008,
I found out there is a lot of problems with the early 2008 Mac Pro.
My early 2008 Mac Pro has been repaired ones under warranty and now it stopped working again ! Also see under: Mac Pro early 2008 no chime and does not start up. Why is this ????
It worked well for about 2 years and then it just fails and i had this failing issue twice already !!! Is this just a BAD Apple product or how do you think I need to approach this. Let’s face it, these machine don’t come cheap and you at least expect them to work without problems for 4-5 years. What is happening here ???
Cheers, Kavango

go to a black screen after 15 minutes or a couple hours
That is probably an indication that you need to find a new graphics card.
RE: Mac Pro Replacement Graphics cards
1) Apple brand cards,
2) "sold in the Apple store" cards, and
3) "Mac Edition" cards ...
... show all the screens, including Boot up screens, Safe Mode, Installer, Recovery, debug screens, and Alt/Option boot screens. At this writing, these choices include:
1) Apple brand cards:
• Apple-firmware 5770, about US$250** works near full speed in every model Mac Pro, Drivers in 10.6.5
• Apple-firmware 5870, about US$450
2) "sold in the Apple store" cards
• NVIDIA Quadro 4000, about US$1200
• NVIDIA Quadro 5000, about US$2500
3) "Mac Edition" cards -- REQUIRE 10.8.3 or later:
• SAPPHIRE HD 7950 3GB GDDR5 MAC Edition, about US$480** Vendor recommends Mac Pro 4,1
• EVGA GTX 680 Mac Edition, about US$600
The cards above require no more than the provided two 6-pin aux power connectors provided in the Mac Pro through 2012 model. Aux cables may not be provided for third-party cards, but are readily available.
If you are Meet ALL of these:
• running 10.8.3 or later AND
• don't care about "no boot screens" etc AND
• can re-wire or otherwise "work out" the power cabling, THEN:
You can use many more cards, even most "PC-only cards"

Problems with the iOS 5.1 version, HELP!

I just upgraded to the latest version - iOS 5.1 on my iPhone 4, but now the screen is freezing all the time, and the phone shuts down. Is this a problem with the new 5.1 version? What can I do to fix it?

Try to restore it... I'm hating this iOS 5.1, everything was working much better before it was released. I shouldn't have upgraded...

Strange problem with color measure in Mac.

Hello, I am having a strange problem with color measure in Mac. For example i create a gradient in Photoshop from color 200 200 200 to color 240 240 240. When i measure the color of the gradient with the color measure tool of Photoshop or with the built in OS X color measure tool the measured color is from 200 199 197 to 240 240 238. I have measured the same gradient with Photoshop for PC and the values are OK (the same values that i create).
I dont know what is the problem, but i belive that the colors that i create would be the same that i measure after creating them, and also the same values between Mac and PC. I will appreciate it a lot any help or information that you could give me that helps me to understand what is happening here.
Thank you for your time
Marcelo.

Yep you got it, proof as monitor basicaly strips out any profiling and just delivers it straight.
is there any way to make the OS X color measure tool to measure the original color values
You mean the document colors - No, like I said photoshop is filtering your image through document profile, proof setup and monitor profile. Why do you want to use Digital color meter anyway for this?
i dont understand what is the point to measure color values that will change every time a calibrate my monitor.
Because color values are 'bigger' than whats on your monitor. Your monitor (via photoshop) is only doing the best it can to display those values - which can be anything from LAB colors outside the gamut of your monitor - to CMYK colors. Calibrating it is the only way to allow your monitor to do this in any way accurately. (not ever really possible) Monitors have a certain gamut and are only dispays/representations of the REAL colors that a document, with a profile, holds. So there's only one good reason to measure monitor values, and that's to generate a monitor profile.

Fragmentation problems with PSE 11

I have just installed PSE & Premier Elements 11 on Vista Ultimate. When I try to edit my photos they become fragmented and look like a jigsaw puzzle. This does not happen with PSE 10 on the same computer. Can anyone tell me why this occurs? Could it be a fault with the software?

Thank you for your information about my problem with PSE 11. I have since tried the programme on 2 different computers and it works fine. Seems like the problem is with my computer although my old PSE 10 works okay. I'd appreciate any ideas about what could be wrong with my computer to cause my photos to break up into various segments which don't join together particularly when I move them into 'before and after horizontal' or '......vertical' and even when zooming them. ( HP Pavilion Elite) Vista Ultimate.
Regards,
Stervogel.

Catalog backup problems with PSE 11

Hi,
I'm having terrible problems trying to backup my catalog to an external hard drive.
My PC is running Windows 7 with 8 GB of internal memory. My external hard drive is formatted to FAT 32 and has 130GB of spare capacity. My catalog is 45GB.
I have previously backed up the the catalog without any problems but can't remember if I did this before I upgraded to PSE 11.
I initially tried doing a full backup but got an error part way through writing the 'breeze' data. Having read that the breeze data was only used for face recognition, I deleted the remaining breeze data files and tried again.
I then encountered a problem when writing some of my early .jpg files. I couldn't see any obvious problem with these but tried removing them and runnning the back up again.
This time it got a bit further but hung up on some .mpg files.
I removed all video files and tried again.
This time it got up to over 60% complete but it then hung up on some early files which had a 'description' 2002 rather than a straight date name to the file. I thought that there might be a problem with file names including ' 's ', so removed these and tried again.
I then tried running Catalog 'optimize' and 'repair' (I didn't tick 'the re-index visual similarity data').
I eventually got up to over 65% complete but couldn't get the backup to go past my 2007 files no matter what files I removed.
I then tried doing an incremental backup using a Catalog file that I had created in 2011. This backup failed with 'an error encountered while writing.....WaldoData\waldo.cache'
I now don't know what to try! Any suggestions would be greatly appreciated.
FYI, looking at the backup Catalog files that I have previously created, it appears that only the first contains all the images from whole catalog with an equal number of .xml files.
Two others which I created (which I can't remember were full or incremental backups) only have some of the images. I'm sure that this can't be right.
I presume that for an intial backup the .xml files should run from B0000001 to Bnnnnnnn; the .jpg/.mpg/ etc from Bnnnnnnn+1 to B 2(nnnnnnn) and that when one runs an incremental back up the new .xml files are added from B2(nnnnnnn)+1 to B2(nnnnnnnn)+(mmmm) and the image files continuing for a further (mmmm). Is this correct?
Otherwise what should one be seeing?
Regards
Mike

Thank you for your information about my problem with PSE 11. I have since tried the programme on 2 different computers and it works fine. Seems like the problem is with my computer although my old PSE 10 works okay. I'd appreciate any ideas about what could be wrong with my computer to cause my photos to break up into various segments which don't join together particularly when I move them into 'before and after horizontal' or '......vertical' and even when zooming them. ( HP Pavilion Elite) Vista Ultimate.
Regards,
Stervogel.

After Effects CS6 connot open files created with CC 12.1 Mac version

After Effects CS6 connot open files created with CC 12.1 Mac version. Is there an update?
I am running Windows 7 Pro and Adobe CS6 Suite with all updates

You are never able to open projects from one version of After Effects in an earlier version. This has always been the case.
You can use the command File > Save As > Save A Copy As CS6 to save a version of the project from After Effects CC (12) that can be opened in After Effects CS6 (11).

Problems with PSE 8.0 (Mac version)

Similar Messages

Maybe you are looking for