Problems with putting drivers on windows through bootcamp

When i try to run the setup on windows for bootcamp it says x64 is not available on this comp model what do i do???

Use troubleshoot compatibility mode
navigate to the "BOOTCAMP64.msi" file instead.
Try to include in posts what Mac, version of Windows (obviously 64-bit version at this point).
Some Macs have trouble install 64-bit but you got through that so should work with a little extra.

Similar Messages

  • Qosmio X300-130: Problems with some drivers in windows 7 64 bit.

    I have installed normally in my laptop windows 7 64 bit version. Before I continue with my main problems I am in the forum for answers and I found this [post |http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=232906&#232906] . How can I see if have a 32 or a 64 bit BIOS? If I have a 32 how can I make it a 64?
    And now my problems:
    1. I have installed a 64 bit sound drive for windows 7 of Realtek the version 6.0.1.6392 and it only recognizes the 2 speakers above the keyboard. How can I fix this?
    2. My media controller manager is not responding with the drivers for windows 7 64 bit. Should I have the bluetooth on? I tried with media player and VLC and it wasn't responding. How can I fix this?

    >How can I see if have a 32 or a 64 bit BIOS? If I have a 32 how can I make it a 64?
    Start the notebook and press F2. Then you should be able to access the BIOS.
    There you should see the version number. Furthermore you can download the latest BIOS from the Toshiba European driver page.
    >1. I have installed a 64 bit sound drive for windows 7 of Realtek the version 6.0.1.6392 and it only recognizes the 2 speakers above the keyboard. How can I fix this?
    The notebook supports the speakers: main x2 + tweeter x2 + woofer harman/kardon
    All speakers are controlled by sound chip. So you need to install just the Realtek sound driver.
    Further settings can be found in control panel Realtek HD audio manger.

  • Problems with usb drivers on windows 7 but only for internet tethering using usb.

    Something got mixed up and now my iphone 4 using ios5 cannot transfer internet connection to computer using usb port. I got yellow mark in computer managment on iphone icon. I  tried all that: http://support.apple.com/kb/TS1538?viewlocale=en_US but it didnt help i does not want to update the driver that is located in that directory.

    Hi.I did not have it installed, but have installed it now. Is this a possible cause of my problems with the USB drivers install? Thanks a lot!- IceSony

  • Problems with graphics card running windows on bootcamp..

    I currently have Windows Vista 32 bit installed on my mac with bootcamp. The reason I have it installed is I want to run an MMO RPG (DDO) on my mac and it is only supported on windows.
    However it will not allow me to play it as it says that no graphics device could be located (Game error 122 for those that play it)
    My question is how I utilise the graphics card from the mac onto windows, as the VGA adaptor doesn't seem to be sufficient??
    Either that or does anyone know of a way I can play DDO through MAC OS??
    Any help much appreciated.
    Thanks.

    Just tried what you recommended, but still to no avail..
    What's confusing me is the following;
    1)When checking system performance it tells me that my graphics are as follows
    Graphics - Desktop performance for Windows Aero
    Gaming Graphics - 3D Buisness and Gaming graphics performance.
    2)http://svc.systemrequirementslab.com explains that I cannot run the game due to my graphics being inferior (I highly doubt this).
    Minimum: 64 MB video card with Hardware T&L
    (NVIDIA GeForce 2+ / ATI Radeon VE+)
    You Have: Standard VGA Graphics Adapter
    3)Just as the game is about to boot up it gives me the following message;
    [Game Error 122] No suitable graphics device was found. Are you running through a rmeote session or a VM? If not, please check your video hardware capabilities.
    I'm literally 30seconds away from throwing this macbook out the window, please can anyone help?!
    Thanks x

  • HT1461 I created a partition and installed Windows through bootcamp. But I need to increase my partition size due to me needing more space on the windows side. Can I do this with bootcamp, and how do I do it?

    I created a partition and installed Windows through bootcamp. But I need to increase my partition size due to me needing more space on the windows side. Can I do this with bootcamp, and how do I do it?

    Welcome to Apple Communities
    You can delete the partition in Boot Camp Assistant or use Camptune to modify it

  • Can you use and iso version of windows 7 64 bit to install windows through bootcamp?

         I saw windows 7 64 bit online cheap and it was and iso. If I put it on a disc, could I use it to install windows through bootcamp?

    You can use the iso direct from Bootcamp assistant and put it on a USB if your Mac has the ability to boot from a USB flash drive.
    If your Mac has a built in cd drive you will need to burn the iso to disc (as an image) and use that to boot from.

  • Notebook NC6400 HSTNN-C18C problem with grafic drivers

    hello i have
    NC6400 HSTNN-C18C and i have problem with graphic drivers.i have windows 7 proffesional i found some .but in install has failed installation .i have installed game Farming simulator 15 but i still must install latest graphic drivers.can you send me link where i download drivers thanks for help

    Hi,
    It's a good machine isn't it. Unfortunately no official support:
      http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=1848274
    Please try:
       http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/compaq-nc6400-drivers-for-windo...
    Vista driver on the first link may help.
    Good luck.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Problems with the sound in Windows

    Hey everybody, hoping someone can help.
    I'm working with Cubase in Windows with my mac and i have problems with the sound, but not all the time.
    I have an M-Audio card connected and while i'm playing something in Cubase, the sound makes a digital distortion just for 10 seconds, and then again sounds perfect and then again comes back the digital crash, somekind of loop. So i was thinking that maybe was a problem with the drivers of my M-Audio card, but then i was playing a song in Winnamp with the built-in speakers and happens exactly the same, so i think it's a problem with the Mac drivers for Windows, i use the same audio card in MacOsX and i don't have problems
    I have tried various display settings. I have no idea if this is just me or a common problem.
    Thanks in advance...
    MacBook Pro 2.16 GHz Intel Core 2 Duo   Mac OS X (10.4.8)  

    This is not a BOOT CAMP Problem. It is a WINDOWS XP Problem. Either he didn't install the drivers for the sound card. (Which is Realtek High Definition Audio) or the Windows XP audio driver (WNMM) is corrupt.
    Go to Device manager and under Sound, Video and Game controllers you should see a little yellow question mark under the WNMM driver. If this is the case he needs to uninstall the driver and reboot. It will then reinstall itself and should work properly after that.
    MAC PRO   Mac OS X (10.4.9)  

  • Problem with putting music onto my iPod

    Hi,
    Recently I,ve been having problems with putting music on my iPod. Anytime I click to sync my iPod so I can put new songs onto it the songs never show up. Plus all the playlists in the playlist section on my iPod are all repeated over and over again(theres more than one). Theres no problem with my USB ports as I,ve tested them with other MP3 players and theres also nothing wrong with my cable as it shows up on my PC as connected. I,ve also resetted it! I just don't understand whats wrong with it I also have it fully charged when I'm trying to put the songs onto it.
    Can anyone help please?!!!

    " Anytime I click to sync my iPod so I can put new songs onto it the songs never show up."
    This Apple knowledge-base article may help address that issue.
    Windows confuses iPod with network drive.

  • Downgrade to win7 problem with audio drivers. beats audio software for win7?

    I recently purchased the HP Envy 700-074 from best buy.  it was necessary to downgrade to windows 7 for some work software and I would like proper audio drivers/software for windows 7. Right now it seems to be detecting as Nvidia audio driver but in this case it doesnt allow my front panel audio ports to output audio. I would also like to have beats working. 
    here are the hardware ID's associated with the card
    HDAUDIO\FUNC_01&VEN_10DE&DEV_001C&SUBSYS_38423619&REV_1001
    HDAUDIO\FUNC_01&VEN_10DE&DEV_001C&SUBSYS_38423619
    and here's a quick screenshot of the driver that is associating with it right now.. 
    http://gyazo.com/23499c19d5e2a21f81b9124ad822c07d.png
    even those VEN_10DE's seem to associate to nvidia, but from HP the driver is meant to be IDT high definition audio? is something going on here? 
    the only change i've made to the computer is upgraded to an EVGA Nvidia GT 610 video card.,

    Hi, Paul.
    I have similar problem here.
    I bought HP Envy 810-200nr and I hate W8, so I installed Windows Server 2008 R2, which is my favourite.
    Then I solved numerous problems with chipset drivers and finally it all works, but Audio (IDT HD Audio) does not work.
    Completely silent.
    HDAUDIO\FUNC_01&VEN_111D&DEV_76C7&SUBSYS_103C2AF3&REV_1001
    HDAUDIO\FUNC_01&VEN_111D&DEV_76C7&SUBSYS_103C2AF3
    It looks okay, when playing audio - indicator blinks and shows level, volume can be adjusted, all parametrers - speakers, etc seems okay but silent!
    I tried numerous drivers for W8 and W7 64 but they give "Incompatible version" error.
    Can you advise me what to do? I really want WS2008R2 here, but this audio is weird..

  • Problems with shutdown, expose and window switching

    Hi there,
    Recently I've been having a few issues with OS X. First of all it wasn't shutting down properly -- the menu bar would disappear and it would look like it was going to shutdown, but it never did. I could move down to the dock (on auto-hide) and it would re-appear, at which point I can bring up a terminal window and use 'shutdown' to do the job. On startup I'd reset the PRAM, and then do a disk-check, but the problem keeps coming back.
    Subsequently, I've also been having problems with expose and switching windows (i.e. command-tab). Namely, neither of them work. Expose won't fire from either hot corners or the keyboard, and if I re-launch the app from the Apps folder (without trying to kill it first, I should say), it does nothing. Cmd-tab gets interpreted as just tab, and the keyboard shortcut for dashboard also fails (although I can start the dashboard from the dock).
    I read in another post about an invalid jpeg in the downloads folder being able to cause the Expose problem (seems like a most unlikely bug?). Anyway, I cleared all pictures from my downloads folder and functionality came back, but now it's gone again. It's really very frustrating as it makes moving between windows a lot more hassle.
    Any thoughts would be gratefully received.
    TIA,
    Mat

    This sounds interesting.
    Can you post a copy for the rest of us to see?
    As for actually helping you, and not just satisfying our curiousity, if you start cutting pieces of the code you will probably end up finding the source of the problem (and we won't have too big a program to handle). Since DSC is a likely suspect, you may want to start there.
    Also, are you creating an installer and using that to install? If not, you may wish to try that.
    Try to take over the world!

  • Problem With Captivate 4 and Windows 8

    Hi,
    I've a problem with Captivate 4 on Windows 8 projects :
    The mouse is not tracked.
    I've applied the last patch for this version (11/15/2011).
    Is there another patch for this ?
    Thanks a lot.

    Hi there
    I know this will come off as sounding snarky, but please know it's honestly not intended that way,
    Windows 8?
    I never was able to make Captivate 4 run successfully on Windows 7. So I'm not the least bit surprised to hear it has issues with Windows 8!
    Personally, I'm thinking you are due for an upgrade to Captivate if you want it to work on Windows 8. But then again, I'm not even certain if Captivate 6 is Windows 8 compatible.
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • Problem with photshop cc on windows 8.1 and 4k monitor at 3840x2160 resolution

    can anyone help
    i have a problem with photshop cc on windows 8.1 and 4k monitor at 3840x2160 resolution when i lauch photoshop cc everything is very small and i dont know how to get the program at the right size

    Search the forum for similar topics dealing with high-DPI displays. 4k is insane, though. I don't think even CC 2014 is up to it.
    Mylenium

  • I have bought Adobe Photoshop Elements 10 last August 2013 and having problems with installing it on Windows 8.1?

    I have bought Adobe Photoshop Elements 10 last August 2013 and having problems with installing it on Windows 8.1.  Why am I having this problem?

    You can check you Adobe account online to see if the serial number is registered under your account.  If not then your only option will likely be to contact Adobe Support directly thru chat to see if they can provide you with a/the serial number. For them to do so will require you being able to prove ownership.
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

  • Problem with national characters on windows client

    Hello there,
    I'am having problem with national characters on windows client.
    All national data stored in NVARCHAR2 colums, applications (.net) works fine,
    but in sqlplus:
    select city from test_table;
    - everything ok, sqlplus shows national characters
    select dump(N'<national symbols>') from dual
    - returns
    Typ=96 Len=12: 0,191,0,191,0,191,0,191,0,191,0,191
    select * from test_table where city = N'<national symbols> '
    - always returns nothing
    As i understand the problem in
    sql query text (and national literals) convertion
    to servers "WE8ISO8859P1" encoding, Is it possible
    to solve the issue?
    Thanks in advance
    PS.
    Console in right mode (chcp=1251)
    sqlplus shows russian messages well
    Server (oracle 9 on solaris):
    select * from nls_database_parameters
    NLS_NCHAR_CHARACTERSET AL16UTF16
    NLS_SAVED_NCHAR_CS WE8ISO8859P1
    NLS_LANGUAGE AMERICAN
    NLS_TERRITORY AMERICA
    NLS_CURRENCY $
    NLS_ISO_CURRENCY AMERICA
    NLS_NUMERIC_CHARACTERS .,
    NLS_CHARACTERSET WE8ISO8859P1
    NLS_CALENDAR GREGORIAN
    NLS_DATE_FORMAT DD-MON-RR
    NLS_DATE_LANGUAGE AMERICAN
    NLS_SORT BINARY
    NLS_TIME_FORMAT HH.MI.SSXFF AM
    NLS_TIMESTAMP_FORMAT DD-MON-RR HH.MI.SSXFF AM
    NLS_TIME_TZ_FORMAT HH.MI.SSXFF AM TZH:TZM
    NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI.SSXFF AM TZH:TZM
    NLS_DUAL_CURRENCY $
    NLS_COMP BINARY
    NLS_LENGTH_SEMANTICS BYTE
    NLS_NCHAR_CONV_EXCP FALSE
    NLS_RDBMS_VERSION 9.2.0.6.0
    Client (windows server 2003, oracle client 10):
    NLS_LANG = RUSSIAN_CIS.CL8MSWIN1251

    N'<national symbols>', being part of an SQL statement, will be converted to the database character set (WE8ISO8859P1) before being parsed. Only if the client and the database are both 10.2 or higher, the client can encode the literal appropriately so that it survives this conversion.
    In earlier versions, you can do the encoding yourself. Instead of the N'<national symbols>' literal use the UNISTR function: UNISTR('\xxxx\yyyy\zzzz'), where U+xxxx, U+yyyy, U+zzzz are Unicode code points of your national characters.
    -- Sergiusz

Maybe you are looking for