Problems with putting the Schema on the query!!!! Need Help.

Hi guys!
I have a problem and a doubt about putting schema name on my query. I want to know if is neccesery specify the schema name on the query I want to execute. All my queries are on my application, I connect from the begging to my oracle data base with a user and password, this user is only alow for that schema. So my question is if I can ommit the schema name on the query.
Explample
Select * From Table
Select * from Student
Select * from Schema.Table
Select * from Institution.Student
Thanks, and I hope you can help me,
Yuni.

YOU WROTE "I have a problem and a doubt about putting schema name on my query. I want to know if is neccesery specify the schema name on the query I want to execute. All my queries are on my application, I connect from the begging to my oracle data base with a user and password, this user is only alow for that schema. So my question is if I can ommit the schema name on the query."
don't use words that you don't know!
also, your example (in the first post) gave the schema.table as INSTITUTION.STUDENT
so these are all words that you started with.
now, PAY ATTENTION and RUN THE EXAMPLE SQLS I GAVE
connect to the database as INSTITUTION (user, schema, I don't care which).
execute the sql statement "select * from student".
did it do anything? did it return data, did it say "no rows", or did it have an error? my magic 8 ball and x-ray glasses are broken and I can't see you monitor (my old computer only has that one way window). if it works, then you clearly do not need to put be "putting the Schema on the query!!!!". if it didn't work, then TELL US EXACTLY WHAT HAPPENED (copy AND paste).
and where are my cigars ;-)
MERGE AGAIN????? PLZ Somebody HELP ME!!!!!

Similar Messages

  • Problem with iBook powering on... Need help diagnosing please

    Hello,
    So for awhile my iBook G3 (dual USB, 700 mhz, 12" display) when the power is pressed the computer chimes and the hard drive will start spinning and then nothing happens. After a few seconds I can hear the drive stop spinning and the only sign of power is that the keyboard will light at the caps lock key.
    I tried doing a PMU/PRAM reset and the iBook did a long beep noise, then the hardrive started spinning, then power light started flickering, and than it chimed and that's it.
    Not sure what to do with it. I love this computer, and all though it's older and well out of date, it's ultra compact and worked great for wireless internet surfing when away from home. I'd appreciate any help to help figure out what this problem is and if it's worth paying to get it fixed or to replace it.
    Thanks for reading,
    Matt
    iMac G5, iBook G3, iMac DV   Mac OS X (10.4.9)  

    First, check out the Apple Knowledge Base article on troubleshooting portables that won't turn on or start up to see if something there helps.
    It sounds like you may be having logic board problems. Enough Dual USB G3 iBooks suffered from the logic board problem that Apple began the iBook Logic Board Repair Extension Program in January of 2004. Check out the FAQ page and if the symptoms look familiar and it is not past the three-year time limit, give Apple a call.
    You can find the original purchase date of the iBook, by entering its serial number into the box at the bottom of Apple's main support page under "About Your Support Coverage."
    If it is past the three-year time limit (and it probably is), you may want to consider trying the shim fix suggested by John Sawyer in the Apple Discussions iBook G3 (Dual USB) Displays Forum:
    [Y]ou can often fix this yourself by removing the iBook's bottom housing, and placing a shim of any sort, about 1mm to 1.5mm thick, onto the raised square on the bottom shield. I use a Scotch mounting square--you can get them in hardware stores and many grocery stores. When you reinstall the bottom case, it will press against this shim, which will press against the graphics chip, and may allow the chip to come into better contact with the logic board.
    John Sawyer
    CJS Macintosh Repair
    Instructions for removing the lower case:
    iFixit.com
    If the shim fix doesn't work (or you're leery of trying it), DT & T Computer Services in Fremont, California offers the cheapest repair I've found. They have a six-month warranty on the repair.
    Once you get it fixed, try never to pick it up by the left front corner alone. The theory is that picking it up by the left front corner alone can contribute to logic board failure when the case flexes, causing the graphics chip to come loose from the logic board. If you're picking it up in your left hand (as I often do mine), pick it up in the center under the trackpad.
    If you can't manage to get it fixed free or on your own with the shim fix, I almost think it's a better idea to put the money you would spend on a repair toward a new MacBook. They are such a spectacular upgrade over the iBook G3. Hard drive specs, USB 2.0, RAM, processor, Tiger, the newest version of iLife, built-in AirPort Extreme, Bluetooth capabilities, and built-in iSight camera. If you can afford it, that may be the way to go. With a new MacBook, you have the option of using Migration Assistant to transfer your data to the new computer, but that likely won't work if you can't get the iBook to start up at all. However, with a new Mac, you may be able to retrieve some of your data using FireWire Target Disk Mode.
    Good luck. Let us know how things go.

  • Problem with Flash Menu in iWeb...need help please.

    Ok, I designed a flash menu in iWeb and successfully placed it at the top of the site. I then used the "transparent shape" method to make the hyperlinks work properly. I made sure the flash menu was in the back and the transparent shape hyperlinks were in the front. The menu works just fine for me and anyone else using Safari or Mac computers. However, people on Windows using Firefox, IE or Chrome are unsuccessful in clicking the links. They do not work for them.
    Here's my website's homepage link. Keep in mind, if you look there on Safari, it will work but it does not when on a Windows computer. Any help is greatly appreciated.
    http://www.platinumsportspicks.com/Index/Home/Home.html
    It is clearly the problem that the flash menu is opening in front of the hyperlinked shapes but I'm not sure how to make sure they stay on front.
    Message was edited by: kwgrooms

    I don't know the answer to that one but you can use the Mouse Over and Click method I have described on this page....
    http://www.iwebformusicians.com/Tricks/MouseOver.html
    It works in IE.
    Its just a question of making up two different buttons with text for each link, taking a screenshot and cropping them and adding the JPEGs to your upload folder.
    You can make up the buttons on an iWeb page and then delete them when you have taken the screenshots. I usually do this sort of thing in Keynote so that I can save them in case I need to modify them.

  • Problems with iPhone 3G Activation , Error Message (-50), Need HELP!!!!!!!!

    Hi,
    I bought the iphone 3G yesterday through Virgin Mobile. I was told to activate my iphone I need to sync it with iTunes.
    I plugged in my iPhone and it try to sync for a while then an error message pops up. (*We could not complete your iTunes Store request. An unknown error occured. (-50).There was an error in iTumes store. Please try again later*.)
    I've tried several things, reinstalling iTunes, change the options in my internet browser (Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.0.5) Gecko/2008120122 Firefox/3.0.5), turn off my anti-virus software. But the problem still occur.
    I can access iTunes store and my playlists etc, but when I click on Sign-in and then click on create new account the same error message pops up again.
    I've tried to run diagnostics on iTumes. It says that secure link to iTunes store failed. I've passed all connectivity and sync test. Below is the details,
    Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
    LENOVO 0658A22
    iTunes 8.0.2.20
    QuickTime 7.5.5
    FairPlay 1.1.11
    CD Driver 2.0.7.5
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 2.1.2.7
    Bonjour 1.0.6.2 (118.5)
    iTunes Serial Number D763986FFBC26648
    Current user is an administrator.
    The current local date and time is 2009-01-16 00:15:20.
    iTunes is not running in safe mode.
    Video Display Information
    Mobile Intel(R) 945GM Express Chipset Family
    Mobile Intel(R) 945GM Express Chipset Family
    ** External Plug-ins Information **
    No external plug-ins installed.
    ** Network Connectivity Tests **
    Network Adapter Information
    Adapter Name: {CF15D5A8-9110-4EEF-9AFC-3CC17DD113AE}
    Description: Intel(R) PRO/Wireless 3945ABG Network Connection - Packet Scheduler Miniport
    IP Address: 192.168.1.4
    Subnet Mask: 255.255.255.0
    Default Gateway: 192.168.1.1
    DHCP Enabled: Yes
    DHCP Server: 192.168.1.1
    Lease Obtained: Fri Jan 16 00:09:58 2009
    Lease Expires: Fri Jan 16 01:09:58 2009
    DNS Servers: 192.168.1.1
    192.168.1.1
    Adapter Name: {F7421B4F-64B7-47A9-BFDD-A004DE5F7FCB}
    Description: Broadcom NetXtreme Gigabit Ethernet - Packet Scheduler Miniport
    IP Address: 0.0.0.0
    Subnet Mask: 0.0.0.0
    Default Gateway:
    DHCP Enabled: Yes
    DHCP Server: 255.255.255.255
    Lease Obtained: Fri Nov 07 17:38:56 2008
    Lease Expires: Tue Jan 19 13:14:07 2038
    DNS Servers:
    Active Connection: LAN 連線
    Connected: Yes
    Online: Yes
    Using Modem: No
    Using LAN: Yes
    Using Proxy: No
    SSL 3.0 Support: Enabled
    TLS 1.0 Support: Disabled
    Firewall Information
    Windows Firewall is on.
    iTunes is enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to iTunes Store was successful.
    Secure connection attempt to iTunes Store was unsuccessful.
    An unknown error occurred (-50).
    Secure connection attempt to iPhone activation server unsuccessful.
    An unknown error occurred (-50).
    Last successful store access was 2009-01-16 00:10:18.
    ** iPod/iPhone Connectivity Tests **
    iPodService 8.0.2.20 is currently running.
    iTunesHelper 8.0.2.20 is currently running.
    Apple Mobile Device service 2.12.33.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Connected Device Information:
    iPhone, running firmware version 2.2
    Serial Number: 878514GXY7K
    ** iPhone/iPod Touch Sync Tests **
    Sync tests completed successfully.
    Anyone have an idea of what's happening please let me know. I really want to start using my iphone.
    Thanks heaps
    Bec

    No need to SHOUT. The cable is the one used to connect your iPhone to your PC. Suggest getting another one.
    The problem may be that you're using USB to connect to the internet. It's too slow and will cause problems when you have other high speed USB connections. Use an Ethernet connection to your modem/router. For additional troubleshooting, see these Apple support articles:
    http://support.apple.com/kb/TS1495
    http://www.apple.com/support/iphone/troubleshooting/
    Message was edited by: modular747

  • Problem with my curve 8330!!! NEED HELP ASAP

    My phone is not connecting to the mobile network. I have downloaded the software and it that did not work.  There are times when the phone does connect with the network, but it's in a very intermittent way. On the top right hand corner the phone displays the 1X and not the 1XEV as it's supposed to.  I have contacted the service provider and their technical support was no help.  Is there any way of fixing this problem?  the phone is only a year old.
    Please provide your assistance as soon as possible, as the phone has not worked in a month or so.

    Your service provider was no help?  Then you need a new service provider.  If you purchased the device from them and you pay monthly for service then they should see your problem through to resolution.  If the device is defective then they should replace it if it's under warranty.  If it's not under warranty then they should at least see your issue through to the point up to replacing the device.
    I would suggest wiping the OS from the device and reloading the OS or just upgrade the OS to a newer OS.  If it still has the same issue then I'd say it's hardware and the device needs to be replaced. 
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • I'm having problems with videos, they shake and the images break up back and forth into striped colors, how do I fix this?

    I'm having problems with videos, they shake and the images break up back and forth into striped colors, how do I fix this?

    1) This is because of software version 1.1. See this
    thread for some options as to how to go back to 1.0,
    which will correct the problem...
    http://discussions.apple.com/thread.jspa?threadID=3754
    59&tstart=0
    2) This tends to happen after videos. Give the iPod a
    minute or two to readjust. It should now be more
    accurate.
    3) This?
    iPod shows a folder icon with exclamation
    point
    4) Restore the iPod
    5) Try these...
    iPod Only Shows An Apple Logo and Will Not Start
    Up
    iPod Only Shows An Apple Logo
    I think 3,4, and 5 are related. Try the options I
    posted for each one.
    btabz
    I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

  • I  spend good money for my iPhone i have the iPhone 5 with the new charger slot which is smaller. I have been through at least 3 charging cords and this is not acceptable to me. i never had a problem with this on my older phone. apple needs to correct tho

    I  spend good money for my iPhone i have the iPhone 5 with the new charger slot which is smaller. I have been through at least 3 charging cords and this is not acceptable to me. i never had a problem with this on my older phone. apple needs to correct this and reimburse me for this cord.

    Charging cords are covered by the iPhone warranty or their own warranty
    if puchased separately. Take your iPhone and the cords to your local
    Apple store for evaluation and possible replacement.

  • I am having problem with me Iphone4, looks like the mic of my phone is not working. no one can hear me if I make a call to them

    Can any one please help me I am having problem with me Iphone4, looks like the mic of my phone is not working. no one can hear me if I make a call to them. I have tried all restoring options but no use. please help me

    The mic on my iPhone4 has just quit also. Similar symptoms to yours in that people I'm talking to hear only static or my voice very faintly. The voice/memo recorder also only really records static.
    It happened suddenly and seemed to get better after a day or two but then went completely after another day.
    I'm returning it to Vodafone New Zealand shortly but will have to wait 5-10 days for a replacement. There are NO Apple accredited means to speed this procedure up in NZ.
    We don't even have a single physical Apple Store where you could walk in and talk to a Genius.

  • Hello I have a problem with my ipod touch 1G the problem is that see me key to the floor! And when recogi not prendia after 5 minutes prendio but it gave to me the surprise of which the battery had finished completely! What I did was to set it to load wit

    Hello I have a problem with my ipod touch 1G the problem is that see me key to the floor! And when recogi not prendia after 5 minutes prendio but it gave to me the surprise of which the battery had finished completely! What I did was to set it to load with the USB but do not load the battery me the icon of the battery appear and below of her the beam that indicates that this being loaded but this way I have left it the whole yesterday and what goes of today and continues without loading anything! They can help me porfavor I am grateful for them to him very much!   And my PC does not detect it not itunes

    Try the not-charging topic of:
    iPod touch: Hardware troubleshooting
    It could be that the battery is dead.

  • I have a problem with itunes when I sync the saved music and want to sync my iphone 5 ios 7.0.6 no longer passes the music thing is that just stays on "waiting for sync" and not worry please help are more than 400 songs that do not want to hear who are wi

    I have a problem with itunes when I sync the saved music and want to sync my iphone 5 ios 7.0.6 no longer passes the music thing is that just stays on "waiting for sync" and not worry please help are more than 400 songs that do not want to hear who are wi

    Plawexki wrote:
    ...  do you know if the contacts, photos, messages etc will be wiped?
    Yes... Everything will be Wiped and Replaced with what is currently on Your Mac.
    SYNCING with iTunes
    See here  >  http://support.apple.com/kb/HT1386
    From Here  >  http://www.apple.com/support/iphone/syncing/
    You may find this information of interest...
    Have a read here...
    https://discussions.apple.com/message/18409815?ac_cid=ha
    And See Here...
    How to Use Multiple iDevices with One Computer

  • I have a problem with my MacBook Pro is the almost of my app not working at all like a app store and terminal and other important apps please if u can help me as fast as you can cuz i don't wanna format it that's why am on Mac now not win ?

    i have a problem with my MacBook Pro is the almost of my app not working at all like a app store and terminal and other important apps please if u can help me as fast as you can cuz i don't wanna format it that's why am on Mac now not win ?

    Abdussalam.A,
    you mentioned that Terminal does not work at all for your MacBook Pro. What currently happens when you run Terminal? In what way does it not work?

  • In iTunes the iPhone device icon will not show up whenever I plug in a USB into my PC but the iPhone icon will show up in 'This PC'  so if anyone who knows a resolution to my problem with my iTunes or PC,it would really help me.I need at least Help or Tip

    In iTunes the iPhone device icon will not show up whenever I plug in a USB into my PC but the iPhone icon will show up in 'This PC'  so if anyone who knows a resolution to my problem with my iTunes or PC,it would really help me.I need at least Help or some Tips.I have already tried many things to iTunes and my PC like trying to restore my PC but that do anything.Also,would it be fine if i contacted (call) Apple Support? Please,I need help because what I think is wrong is my PC,iPhone,or USB might be messed up so if anyone could help me with this,it would be really helpful and for anyone to be nice enough to help me.

    I think this article will help you.

  • Hiya, I've got a weird problem with my iPhone4. On the 'home page' of my iPhone the mail symbol tells me there's a new mail waiting for me. However, there's no new mail to be found. Does anyone know what the problem is? Thanks

    Hiya, I've got a weird problem with my iPhone4. On the 'home page' of my iPhone the mail symbol tells me there's a new mail waiting for me. However, there's no new mail to be found. Does anyone know what the problem is? Thanks

    This response is a little late as I just read about your problem. I have a 2012 Dodge Charger and a 2012 Chrysler Town and Country and both worked flawlessly with the iPhone 5s my wife and I had. However, we just upgraded to the iPhone 6 and Uconnect will receive calls but you cannot answer them. You can callout successfully, however. the annoyance being the inability to answer incoming calls in the HandsFree mode.

  • When I connect my nano to my computer I receive the following message: There is a problem with this drive. Scan the drive now and fix it. My computer recognizes the ipod but the play lists saved in my itunes library are not the playlists that are on my na

    When I connect my nano to my computer I receive the following message: There is a problem with this drive. Scan the drive now and fix it.
    In addition, when I connect my nano, my computer does recognize but the library and playlists in my Itunes is not the same as the library/playlists on my ipod (on this ipod). If I purchase new songs from itunes, they go to the library on the computer but I cant get them to the ipod playlist.

    bump, I have same issue. thanks, MM

  • I can't text a contact but can voice phone them. I don't have the problem with any other contact and the contact is not blocked. I have an iphone5.0 OS 8.1.3

    I can't text a contact but can voice phone them. I don't have the problem with any other contact and the contact is not blocked. I have an iphone5.0 OS 8.1.3. I used to be able to text them with no problem. The only difference I can think is that this problem may have started since I downloaded the OS I am using now
    cycleluke

    Wasn't responding to you. Please show me links where this helped.
    Apple isn't showing any system problems: https://www.apple.com/support/systemstatus/

Maybe you are looking for

  • How do I get my iPod touch to work after the update?

    I updated my iPod touch with the new software. I went through all the steps like my location and language and such and I chose to "Restore from iTunes backup". I tap next and connect to iTunes on my computer. It syncs my things and my iPod still says

  • How do you load a DVD on to a Mac Mini by using another MacBook Pro?

    What is the procedure for using a MacBook Pro DVD drive to load a disc of data onto a Mac Mini computer?

  • Abt inner joins

    hi can u tell me about innerjoins or from where i can get the tutorial of inner joins in abap

  • Sales Document Number

    Hi All, Is there any function module that returns the sales document number for the relative billing document generated? Thanks in advance. Regards, Arunkumar S

  • Creating An Automation - Copy, Archive

    Hi, I'm new to Final Cut Server (FC Server) and learning it now. Have a few questions, searched the internet for answers but still hope for assistance here. - Within "Search Expired" response, what is the purpose of "Event Type"? - Within "Subscripti