Problems with Qt Config (Xfce 4.6)

Hi
I have problems with QT Config .
I use Desktop Environments XFCE , when you save settings QT Congif (set size fonts etc ) .
Setting do not save
I have set chmod in catalog QT config .
How to fix ?
Last edited by nocentis (2009-03-16 12:00:29)

Welcome to the Apple discussion forums.
As Joeuu stated, assuming you don't have an Intel-based MacBook Pro, that means that your PowerBook is PowerPC-based. There are several steps that should get you back on track.
First, reset your power management unit (PMU). Follow directions at http://docs.info.apple.com/article.html?artnum=14449
Next, repair permissions by running Disk Utility, located in your mac hd, application/utilities folder. Highlight your hard drive and repair permissions.
Did you use the software update function or did you download the update from the Apple support site? In any event, download the combo update 10.4.6 from http://www.apple.com/support/downloads/macosx1046comboforppc.html Updates through the software update function have recently created some unique 'situations', that use of the combo update have solved.
After the update, repair disk permissions again. This is good housekeeping to do before and after any major software installation.
PB G4 1.67ghz 1.5gb; mini G4 1.5ghz 1gb Mac OS X (10.4.6)

Similar Messages

Problem with reading config file

Hello,
I have problem with reading config file from the same dir as class is. Situation is:
I have servlet which working with DB, and in confing file (config.pirms) are all info about connection (drivers, users, passw, etc.). Everything work fine if I hardcoded like:
configFileName = "C:\\config.pirms";I need to avoid such hardcoding, I tryied to use:
configFileName = Pirms.class.getClassLoader().getResourceAsStream ("/prj/config.pirms").toString();but it isn't work.
My config file is in the same directory as Pirms.class (C:\apache-tomcat-5.5.17\webapps\ROOT\WEB-INF\classes\prj)
Also I tryied BundledResources, it isn't work fo me also.
Can anybody help me to solve this problem? with any examples or other stuff?
Thanks in advance.
Andrew

Thanks, but I am getting error that "non-static method getServletConfig() cannot be referenced from a static context"
Maybe is it possibility to use <init-param> into web.xml file like:
<init-param>
<param-name>configFile</param-name>
<param-value>/prj/config.pirms</param-value>
</init-param>If yes can anybody explain how to do that?
I need to have that file for:
FileReader readFile = new FileReader(configFile);Thanks in advance.

Problem with TMS config

Hi all,
I have a problem with my TMS config.
When I adjust the transport queue, the "No system found in another group for import queue QAS" message appears.
My landscape includes a DEV-QAS and a PRD systems.
can somebody help me?
thanks in advance.

Hello,
I have the same problem. I just forund the alert from RZ20. When we are doing transport and checking RFC connections from SM59, seems to be all working fine. So I am not sure where this alert is coming from.
Command TMS_MGR_READ_TRANSPORT_QUEUE
Service Transport Service
Start Online
Function TMS_MGR_TRANSMIT_TR_QUEUE
Message TRANSMIT_QUEUE_FAILED
No system found in another group for import queue <SID>
I run into this thread but there is no information on how the problem got resolved. Please let me know if you have any ideas.
Regards,
Tony

Problems with firefox in xfce

I'm not sure if this is a firefox or xfce's fault, but when I try to open a file or a folder (open containing folder) from the download manager in firefox it does nothing.
Any clue?

Well...I don't know if this helps, but I use Firefox and xfce4, and I have no problem with downloads. I click on a link, and get a dialog saying "You have chosen to open <filename> which is <filetype> from <URL>. What should Firefox do with this file?" If I select "Save to Disk", I get a second dialog to select the directory to save it in. If the file takes more than a few seconds to get, the download manager pops up with a nice progress bar. I've never actually had to do anything from the dl manager - it just appears, does the progress bit, and then disappears.
If there's anything I can tell you about my setup, let me know,

Build shared problem with configure / config.guess

Hi,
I'm constructing some 3rd party libraries from source level with configure/automake in Suse 9.2. A common mistake in all libs is done by config.guess: it prints out "i686-pc-linux-gnuaout" which switch off the shared support at all. It's easy to workaround by print "i686-pc-linux" instead directly from configure:
ac_config_guess="echo i686-pc-linux"
Then the shared support is enabled and there left some minor problems with linker options -soname and --rpath. Then some libs can create the shared libs, for instance the apr and xml2.
Others do not, for instance log4cxx and acetao, but they do not produce any error. It looks like that simply the shared link step is not done, however the symbolic links to the release version are done. I also tryed with LD=CC and LD=cc instead of the gnu ld, but then already in config.log the shared support is not recognized. If I build by hand:
cc -shared *.o -o libACE.so
it seems to work and the result usable by applications. Since acatao includes lots of libraries to build, the manual creation is not handy / possible. So any hint to solving that are welcome. I'm using the latest sunstudio version (feb2007).
thanx rolf

It really depends on autoconf/libtool version those libs are using.
Till the most recent versions libtool had absolutely no clue that SunStudio exists on Linux. And default fallback happened to be gcc.
If you give me some specific lib (source URL or name/version) I can tell you why this lib does not configure with Sun Studio :)
Most recent version of autoconf is wize enough to handle Sun Studio on Linux. So one of the solutions for the libs might be to upgrade to a newer autoconf. Not what common user would commonly do though...
regards,
__Fedor.

Problem with the config.xml

Dear all,
After doing a wscompile on the config.xml file (JWSDP1.6), I am able to generate the wsdl for the interface defined.
But now the config.xml shows an error
"Cannot find the declaration of element 'configuration' "
for the attribute xmlns="http://java.sun.com/xml/ns/jax-rpc/ri/config"
Any idea what is the problem as "http://java.sun.com/xml/ns/jax-rpc/ri/config" is no longer available on the sun site.
Any alternate references to be made to this xml namespace declaration.
Rgds,
Seetesh

My point above is that Project 2007 was extremely buggy and unless files are saved using Project 2007 SP3 first you are likely to experience problems with the files when opening in project 2010. Project 2007 to 2010 with no service packs is problematic.
With SPs applied you should have far fewer problems.
Doesn't look like a exe with SP2 is available yet so you need to add the service pack separately, probably in the updates folder.
If all Project 2007 installs are already at SP3 then no need for this.
Rod Gill
Author of the one and only Project VBA Book
www.project-systems.co.nz

Itunes7 does not let me start up because detected problem with audio config

hi,
i have had itunes for a while now but i just upgraded it to version 7. i restarted my computer afterwards but when i tried to start up itunes for the first time it said there was a problem with the audio configuration.
this is the message,
itunes cannot run because it has detected a problem with your audio configuration.
i am using windows xp and would be very grateful for any help, thanks!
lenovo 3000, N100 Windows XP

this is the message,
itunes cannot run because it has detected a problem with your audio configuration.
That one is most commonly caused by a problem with your QuickTime. (iTunes uses QuickTime for audio and video playback.)
The following document may be of some assistance:
iTunes 7 for Windows: iTunes has detected an audio configuration problem

New Version error - problem with audio config

iTunes has been working great on Vista so when I was prompted to download the new version I thought why not. It unloaded the old version and then loaded the new without a hitch. Went to run the new version and I get the error:
iTunes cannot run because it has detected a problem with your audio configuration.
But nothing has changed! Can anyone shed any light on this?

I can't help you but I have the same problem but with windows xp.
*** really..

Vista - Problem with Audio config!!! please help!!!

I just finished a clean install of Vista and installed iTunes. When I try to open iTunes an error message pops up saying "iTunes has detected a problem with youraudio configuration.Audio/Video playback may not operate properly." I have looked on teh forums and all I have seen is something about uninstalling QuickTime and then reinstalling it. I have tried that twice and I still get the same error message. If anyone could help that will be great.

Try this -> http://docs.info.apple.com/article.html?artnum=304424

Problem with audio config.?

I've had this iPod...Video? Is that a 5th-generation? Whatever. Since...July or so last year. Maybe longer.
And suddenly I'm getting this weird "iTunes cannot run because it has detected a problem with your audio configuration."
Checked the audio. Works fine. Tried the "unknown error" FAQ. Still isn't working.
What's up?!
iPod Video 80 GB Windows XP ...accidentally got candle wax on it.

Try this -> http://docs.info.apple.com/article.html?artnum=304424

Problem with X -config (freeze + black screen)

Hi, everyone. I'm a newbie in linux, so dont punch me .
I was following the beginners guide & after X -config /root/xorg.conf.new got freeze + blackscreen (alt + ctrl + bckspc or alt + Fn dont works).
I have created /X11/xorg.conf & can start X server, but X -config /root/xorg.conf.new or /etc/X11/xorg.conf gives black screen (with signal).
My VGA is HD3850.
Any ideas how i can fix it?
Here is my xorg.conf
Section "ServerFlags"
Option "AllowEmptyInput" "off"
EndSection
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Razer" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "InputDevice"
Identifier "Razer"
Driver "mouse"
Option "Name" "Razer Lachesis Optical Mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "Buttons" "9"
Option "Resolution" "1250"
Option "ZAxisMapping" "4 5"
Option "ButtonMapping" "1 2 3 6 7 8 9"
Option "Emulate3Buttons" "true"
Option "SampleRate" "1000"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "microsoftmult"
Option "Xkblayout" "us,ru"
EndSection
Section "Module"
Load "glx"
Load "dri"
Load "drm"
EndSection
Section "Monitor"
Identifier "Monitor0"
HorizSync 31.0 - 81.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Card0"
Driver "radeonhd"
VendorName "ATI Technologies Inc"
BoardName "RV670PRO [Radeon HD 3850]"
Option "AccelMethod" "exa"
Option "DRI" "on"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "1024x768" "800x600"
EndSubSection
EndSection
Section "Extensions"
Option "RENDER" "enable"
Option "DAMAGE" "enable"
Option "Composite" "enable"
EndSection
/var/log/Xorg.0.log contain no errors or warnings (except ACPI & font paths)
Thx 4 help.
P.S Can add log if it helps
P.P.S Its one of my xorg.conf files, also i've used variant 4 xf86-video-ati
Last edited by InsaneDevice (2010-02-27 06:32:32)

My english is fine (i read well at least) .
At first message i said
I have created /X11/xorg.conf & can start X server...
I =can= start x server --- its mean that startx works fine & i can see 3 windows with clock . And if you mean that i dont want use x -config, then for what all this manipulations with reinstalling was?
Besides "Xorg -configure" & "x -config /etc/xorg.conf" are different things for me, because one create the basic config, while second test this config. So i thought you mean that i have to create it from scratch without using any commands
... Damn.. i just have read english & russian beginner guides. Russian says: "after installing xorg u have to create conf file, using Xorg -configure, then test it with command X -config /root/xorg.conf.new & IF IT WORK - copy to /etc/X11/xorg.conf. I didnt find that in english version .
Well, thank you for your patient & help . I think, that problem is solved (i think - say me if i wrong)
But i still want to know, why x -config /etc/xorg.conf give me that black screen + freeze, so if anybody knows - plz, message me.
Last edited by InsaneDevice (2010-03-01 07:36:42)

Odd problem with strusts config file

This morning when I started up J Developer I am unable to open my struts-config file. Last evening when I closed my application everything was working fine, I compiled and ran the app for the last time just before closing J Developer. Now I am unable to compile, open this file (it is the same with other applications, as well). I have gone back to a previous version of my app, uninstalled Jdeveloper and reinstalled. Nothing seems to solve my problem. I am working on a Windows machine. Any thoughts on what might have changed or happened would be greatly appreciated.

I think that I found the problem. Somewhere along the line I messed with the shortcut(I don't remember doing it or what I did but....) with the shortcut that I created and I got an odd path looking something like .... ...\c$\JDev\jdev\bin\jdevw.exe
I fixed that and have not had a problem since.
Thank you for your help.

Problem with saving config on asa 5505

I have asa 5505 with 512mb , i am trying to save ios on it but i failed many times , I have sandisk 2GB and i formatted with windows on fat but every time i see disk0 failed , any ideas what is the problem ?
Thanks

I have asa 5505 with 512mb , i am trying to save ios on it but i failed many times , I have sandisk 2GB and i formatted with windows on fat but every time i see disk0 failed , any ideas what is the problem ?
Thanks

Problem with ./config

I'm currently following
this
tutorial to set up Alchemy. I got to the step where it says to
enter ./config, and at this point I get the output:
quote:
Add "source /home/Nicholas/ALCHEMY_HOME/alchemy-setup to your
login script.
"alc-home" takes you to the Alchemy install folder.
"alc-on" puts Alchemy gcc toolchain replacements at the
front of your path.
"alc-off" restores original path.
"alc-util" shows you various Alchemy-related environment
vars
You need Flash 10 or AIR 1.5 and the Flex 3.2 SDK installed
for testing.
Nothing past that point in the tutorial seems to do anything.
What should I do now? Please be as specific as possible; I am using
Cygwin and I just installed it today, thus I am not the least bit
familiar with it.

Of course I hope that you have installed the package - -
Alchemy Toolkit
for Cygwin on Windows
Edited
Then you have to run cygwin shell -> it will create a
directory and several files and - .bashrc, in the /home / Nicholas
Open this file, and added to it strings.See my example:
my CYGWIN setup in drive - C: \. But my virtual drive - C: \
will be so->
/cygdrive/c/
my ALCHEMY installed in C: \alchemy directory
But the virtual path will be /cygdrive/c/alchemy/
my FlexSDK installed in C:\flex directory
But the virtual path will be /cygdrive/c/flex/bin
Then, I simply added into file - . bashrc next path
Example:
source /cygdrive/c/alchemy/alchemy-setup
PATH = ALCHEMY_HOME /achacks:/cygdrive/c/flex/bin:$PATH
export PATH
And after the restart, all should work fine.But....-if you
install correct CYGWIN!!!
Importantly!
Do not forget! during the installation CYGWIN to install
these additions - zip, perl,gcc.Using only - setup.exe
added:
Then follow the instructions- Step13:
http://labs.adobe.com/wiki/index.php/Alchemy:Documentation:Getting_Started#Windows
Perhaps if do you see an
java.lang.UnsupportedClassVersionError... Unsupported
major.minor version 49.0' error
Please - Install The Latest Java JDK

6267 problem with personal config. settings

Please i need some help. I have an unlocked nokia model 6267 i bought it in a nokia store in Mexico City. I use this phone with 2 operators. Yesterday i erased my configuration settings i had with one of this operators because i had a problem connecting with EDGE so i can configurate them again.
The problem now is that when i try to configure any of the personal configutation settings (web, mms, access point, etc) i only receive the message:
"Cannot add new account. Memory full"
Of course i have to say that my phone memory is not full. I have 22 MB free.
Someone plz can help me with this problem.
Thanks

You've checked with the carrier and they offer it, are you provisioned by them to use it?
Troubleshooting hospot http://support.apple.com/kb/TS2756
understanding hotspot http://support.apple.com/kb/HT4517

Problems with Qt Config (Xfce 4.6)

Similar Messages

Maybe you are looking for