Problems with quality of image since upgrading to Adobe Reader XI version11.0

Since installing the new update I seem to be having a problem scanning files to PDF - first the scan missed off the bottom over every page but after several hours of changing settings on the computer and on the scanner (and actually uninstalling all printer and adobe software and reinstalling it again), this now seems to be ok - but the quality of the PDF is quite poor.
I can't work out how to get a better quality and I am sure it is something to do with PDF / Adobe because when I scan the document and save it as word / TIFF / JPEG, the image is brilliant. I also can't seem to save any of the TIFF / JPEG files to PDF.
Any ideas? The above problem is happening on my MAC and on the integrated Windows 7 via VMFusion Ware.
Thanks

Good Day! I also noticed that after I installed the Adobe Reader XI Version 11.0.1 that the image quality is very poor unless you zoom in a lot. If I open the same PDF file with Adobe Acrobat Standard 9.0, the image quality is very good. There must be an issue with Reader XI Ver 11.0.1. Also, I have found that if I select text and copy it to the clipboard, an error message pops up. The text is, in fact, copied to the clipboard, so I don't know what the error is. The error box is created by Adobe, not Microsoft Windows.

Similar Messages

Problems with Mail (on O2) since upgrade to Mountain Lion

After having spent a frustrating few days trying to get this sorted, I thought I should make folk aware of the above problem. Since upgrading to Mountain Lion I have not been able to send email using smtp.o2.co.uk. The O2 call centre notes that a number of folk have been having this problem.
Some have suggested setting Custom Port to 25 but this hasn't worked for me.
Apparently O2 are going to get back to me within 5 days with an answer. I'm not holding my breath but am pleased to say I can still use my iPhone to send email.
Can't help but wonder if this has anything to do with the fact that I signed up for an iCloud (***@me.com) account at the same time.
Any thoughts?

I got a fix. it works for me. while i'm on ML. safari and mail doesn't work properly. mail can't send emails with attachment and safari unble to open certain webpages.
i've log into my Internet modem, enable router mode from bridge mode. it works fine now. no promlem with sending emails or surfing the web. hope it'll helpful for u guys.

Since upgrading to Adobe Reader XI I have lost control of my printer properties screen.

When printer dialog box initially appears I get an oversized screen with 2cm high text and no control of the screen OR I get a right sized print dialog box with blank Icons and all text fields a filled with small sized "xxxxxxxxxxxxxxx" in all text boxes.
I Uninstalled / reinstalled 3 times over last few weeks with no effect & have had to drop back to Reader ver 8 to regain control of printing.
Can anybody offer a solution please

Thanks for the feedback Pat.
I restored windows 7 pro's default fonts with no result.
Then I copied another user with same SOE fonts over the top of mine, no results.
I did confirm that in all print or print previews AND 'edit preferences screens' associated with Acrobat Reader XI the same bad results are experienced however in all other applications tested on my desktop then the print/print previews screens were all OK. It's almost as though the fonts used by the unique print/print preview and edit preferences within Reader are not installed & Application will not fall back to or use other windows fonts
This is print preview screen:
This is edit preferences screen:
Still desperate and would appreciate further assistance from all.

I use an Epson Stylus Office BX320FW printer with my IMac. Since upgrading OSX, I have lost the ability to print and scan. I have downloaded printer drivers from both Epson and Apple. I am using the printer in wifi mode but can not get it print or scan

Hi Everybody,
I use an Epson Stylus Office BX320FW printer with my IMac. Since upgrading OSX, I have lost the ability to print and scan. I have downloaded printer drivers from both Epson and Apple. I am using the printer in wifi mode but can not get it print or scan. How do I uninstall the Epson software and start all over again?
nickel_man_65

Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
Someone on this forum suggested, that USB3 may interfere with the magic mouse.
I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
Thanks for the advice, Bee
Cheers, Gerd

Since I have Yosemite on my iMac I can't view PDF files in Safari anymore. It keeps telling me to upgrade my Adobe Reader, but it is the latest version. Please help? I don't have this problem on my Macbook that does not have Yosemite installed.

Since I have Yosemite on my iMac I can't view PDF files in Safari anymore. It keeps telling me to upgrade my Adobe Reader, but it is the latest version. Please help? I don't have this problem on my Macbook that does not have Yosemite installed.

Back up all data before making any changes. Please take each of the following steps until the problem is resolved.
Step 1
If Adobe Reader or Acrobat is installed, and the problem is just that you can't print or save PDF's displayed in Safari, you may be able to do so by moving the cursor to the the bottom edge of the page, somewhere near the middle. A black toolbar should appear under the cursor. Click the printer or disk icon.
Step 2
There should be a setting in its preferences of the Adobe application such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected.
Step 3
If you get a message such as ""Adobe Reader blocked for this website," then from the Safari menu bar, select
          Safari ▹ Preferences... ▹ Security
and check the box marked
          Allow Plug-ins
Then click
          Manage Website Settings...
and make any required changes to the security settings for the Adobe PDF plugin.
Step 4
Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard by pressing the key combination command-C:
/Library/Internet Plug-ins
In the Finder, select
          Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens by pressing command-V, then press return.
From the folder that opens, move to the Trash any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari.
Step 5
The "Silverlight" web plugin distributed by Microsoft can interfere with PDF display in Safari, so you may need to remove it, if it's present. The same goes for a plugin called "iGetter," and perhaps others—I don't have a complete list. Don't remove Silverlight if you use the "Netflix" video-streaming service.
Step 6
Do as in Step 4 with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari.

DW CS3 problem with PNG-8 images in Design View?

DW CS3 (build 3481) on XP seems to have problems with PNG-8 images, specifically trying to display them in design view.
I had a very simple image that was able to be exported by Fireworks CS4 as PNG-8 using 4 colors (no transparency) for a tiny file size under 250 bytes.
DW could not display it at all, or even recognize it, reporting it was 0 x 0 in size. I published the page anyway, and it looked fine in the browser.
I upped the number of colors to 32, and DW could then display it in design view in the page I was working on.
I'm still having problems with other PNG-8 images. The attached file "temp.jpg" is a screenshot showing part of the design view in DW.
The smaller image on the left of the banner is "58_certificate_of_discharge.png" (attached), and the larger image below is used as the background of the DIV containing the form,"compassbk.png" (also attached).
These images all look fine in the browser, but terrible in DW.
I'm stumped as to why.
Thanks in advance.

According to a different discussion, the images that are stuck as "Queued" are showing a bug in the virus scanning on the forums.
Now trying the recommended 'camera icon' method...
Looks like it worked.
Now compare what it looks like in DW CS3 in the design view:
It's a 16 color PNG-8 made in Fireworks CS4 with no transparency, size is 113 x 58, ending up at 1.71K.
If this is a repeatable problem in CS3, is there any hope of it being resolved, or am I stuck with upgrading to CS4 as my only option (assuming it's fixed in CS4)?
Thanks.

Problem with displaying BLOB images on JSP page using a servlet

hi. I have a big problem with displaying BLOB images using JSP. I have a servlet that connects to the oracle database, gets a BLOB image , reads it, and then displays it using a BinaryStream. The problem is , this works only when i directly call that servlet, that is http://localhost:8080/ImageServlet. It doesn't work when i try to use that servlet to display my image on my JSP page (my JSP page displays only a broken-image icon ) I tried several coding approaches with my servlet (used both Blob and BLOB objects), and they work just fine as long as i display images explicitly using only the servlet.
Here's what i use : ORACLE 10g XE , Eclipse 3.1.2, Tomcat 5.5.16 , JDK 1.5
here is one of my image servlet's working versions (the essential part of it) :
               BLOB blob=null;
          rset=st.executeQuery("SELECT * FROM IMAGES WHERE ID=1");
          while (rset.next())
               blob=((OracleResultSet)rset).getBLOB(2);
          response.reset();
          response.setContentType("image/jpeg");
          response.addHeader("Content-Disposition","filename=42.jpeg");
                ServletOutputStream ostr=response.getOutputStream();
               InputStream istr=blob.getBinaryStream(1L);
                int size=blob.getBufferSize();
          int len=-1;
                byte[] buff = new byte[size];
                     while ((len=istr.read( buff ))!=-1 ) {
               ostr.write(buff,0,len);
         response.flushBuffer();
         ostr.close(); and my JSP page code :
<img src="/ImageServlet" border="0" > If you could just tell me what i'm doing wrong here , or if you could show me your own solutions to that problem , i would be very greatful ,cos i'm realy stuck here , and i'm rather pressed for time too. Hope someone can help.

I turns out that it wasn't that big of a problem after all. All i had to do was to take the above code and place it into another JSP page instead of into a servlet like i did before. Then i just used that page as a source for my IMG tag in my first JSP. It works perfectly well. Why this doesn't work for servlets i still don't know, but it's not a problem form me anymore . Ofcourse if someone knows the answer , go ahead and write. I would still appriceatte it.
here's the magic tag : <img src="ImageJSP.jsp" border="0" > enjoy : )

Problems with your HP printer after upgrading to Windows 8.1

If you are experiencing problems with your HP printer after upgrading to Windows 8.1 please click on the below link and install the HP Print and Scan Doctor and run the utility to fix the issue.
www.hp.com/go/tools.
I was an HP employee
If I have helped you solve your issue please mark it as solved
**Say Thanks By Clicking on the Kudos Star**

Hi.....my laserjet 1536dnf mfp was working perfectly with win 8 pro....then I installed win 8.1 pro and now the computer ,which is part of a network,can not communicate with the scanner of the printer--it prints just fine. On another computer (running win 7 ) on the same network, the scanner and all other printer functions work just fine.
I have tried installing the latest drivers from HP......scanner still not "communicating" with computer.....also temporarily disabled firewall.....please help...all the best -David G (gossat)

I have a problem with my Iphone 4s since I did my first update at your Itunes, the bluetooth and the WiFi it is not workinhg anymore. It is sad that companies like apple are not able to support thier sofware and business. I went to a apple store at Sout

I have a problem with my Iphone 4s since I did my first update at your Itunes, the bluetooth and the WiFi it is not workinhg anymore.
It is sad that companies like apple are not able to support thier sofware and business.
I went to a apple store at South Park, Charlotte NC,
and found out the worst customer service (in my case)
They don't have answers and don't understand about "dont let any customer go away sad or mad"
I explain to them that I did everything they said to fix the problem, even to dounload the iOS 6.1.3
that was supposed to fix the problem.
they said fix the problem in other phones but not in mine.
So here I am with no wifi and bluetooth, with apple technicians and experts that don't know what to do with the problem that the sofware they developed cause in my iphone 4s.
and the solution is for me to pay $199.00 US dollars for a problem that I did not cause.
wich means to buy something else from apple to fix a problem that it is not my fault.
Great! what a convenient solution.
I would like to have an answer from you guys and see if someone there have a better answer for me that shows support, values and integrity as a grest company with solutions for your customers.
Dont think that I want a new phone, I want mine fixed if is possible.
Thank you very much and God Bless you!

Apple isnt here. this is a user based forum for technical questions. The solution is to restart, reset, and restore as new which is in the manual after that get it replaced for hard ware failure. if your within your one year warranty its replaced if it is out of the warranty then it is 199$

PSE 10 from Apple Store problem with camera raw 6.7 upgrade

PSE 9 was not opening Nikon d4 raw files so I've purchased PSE 10 at the Apple Store and installed on my Mac. PSE 10 is still not opening d4 raw files (camera raw 6.5). I tried to update to 6.7 taken from Adobe but did not succeed to install it. Could you please advice what to do?

Thanks for your help. It works !!!
Bartek A
Wiadomość napisana przez Barbara B. w dniu 17 maj 2012, o godz. 00:34:
Re: PSE 10 from Apple Store problem with camera raw 6.7 upgrade
created by Barbara B. in Photoshop Elements - View the full discussion
You will have to do the update manually for the app store version. Instructions are here:
http://forums.adobe.com/message/4106477
(that's for 6.6 but the steps/file paths are the same for 6.7)
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4414265#4414265
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4414265#4414265. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Strange problem with my ipod 2g after upgrade to os 4.2

Strange problem with my ipod 2g after upgrade to os 4.2
the problem with volume some times when i switch on the ipod i hear the sound
alarm rings it's work too i can hear it .. but the problem i cant hear anything else as yourtube or music i cant hear buttons sound when i typing
i hope i get help

I would try in order:
- Reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod from backu via iTunes.
- Restore the iPod to factory defaults/new iPod.

HT1222 I have iphone 4 and the software is ios 7.0.2. I am facing problems with my phone. Since the last software update my phone has started giving problems. like it hangs sometime when i recieve an incoming call. The carrier status bar shifts down a bit

I have iphone 4 and the software is ios 7.0.2. I am facing problems with my phone. Since the last software update my phone has started giving problems. like it hangs sometime when i recieve an incoming call. The carrier status bar shifts down a bit and sometimes it vanishes automatically. I,m confused.
Secondly i have an update IOS 7.0.4 waiting in my Software Update menu. I have tried so many times to update my iphone but it always fails to update the IOS 7.0.4. Any body suggest anything regarding this

Wow. Lots of help. Thanks apple

I have a problem with my application update since i updated to iOS6

i am having a problem with my application update since i updated my iphonw to iOS 6. small updates are taking very long time and even not getting finished after several hours.
my internet connection is very fine and having good speed. i think updating to iOS 6 was a mistake....

Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears, ignore the Slide to Power Off that appears)
Note: You will not lose any data.

HT4623 I have a big problem with my IPhone 4 since I've updated to IOS 6.0.1.

I've got a problem with my IPhone 4 since I've updated to IOS 6.0.1. After the call I'd like to end the call but the picture on the screen becomes magnified
so that you cannot see anything and the screen is not reacting. I need to restart the phone. But 7 or 8 times daily to restart the phone is not really convenient.
Has got anybody the same problem? How can I go back to IOS 5 ? Before the update I was a happy user of IPhone.
Thanks for help.

Downgrading your ios is unsupported by apple. Go to settings, general, accesibility, zoom off..?

Problems with Quality of Raw file when pulled into Photoshop

I use Photoshop CS3 with ACR plugin version 4.6.0.30 installed. When I pull my RAW files into it, I seem to lose a lot of information. For example I took a picture of my black dog. I set the camera (Canon 40d) to save the file in both RAW and high res JPG. When I pull both files directly into photoshop the JPG has more detail information in the highlights and shadows than the RAW file does. This should be the reverse. To see if the problem was in the file or in the process of pulling it into photoshop I also pulled it in through Lightroom. Then I used Zoom Browser (software that came with my camera). Zoom Browser forced me to convert to a TIFF before importing it to Photoshop. I'll try attaching a file I made that shows the results of each.
My conclusion is that there is not a problem with the CR2 file, since the CR2 file converted to the TIFF has the most detail, but something is happening when I import it into photoshop. I just don't know what settings I should be looking at to fix this problem. Any help would be appreciated.
Here's a link to the example:
http://www.reflections-etc.com/problem_with_RAW.jpg
Thanks

pcather wrote:
My conclusion is that there is not a problem with the CR2 file, since the CR2 file converted to the TIFF has the most detail, but something is happening when I import it into photoshop. I just don't know what settings I should be looking at to fix this problem. Any help would be appreciated.
Camera Raw 101: ACR has different baseline "Defaults" than the Canon software, therefore you will need to make your own adjustments–and perhaps save out a new ACR Default. Canon's software only has to worry about a small sampling of cameras. Camera Raw supports over 230 cameras' raw files. As a result Canon's software tends to match the in camera JPEG and the camera's LCD by default.
Camera Raw on the other hand is more concerned offering a normalized default rendering of the raw data. Rather than trying to force a certain "look" (generally higher in contrast and more saturated) ACR will show the raw data a bit flatter and less saturated.
Fact is, Camera Raw has a huge number of controls for the express purpose of allowing the user to maintain total control over the rendering of the raw data...what you need to do is learn how to use all the sliders....

Problems with quality of image since upgrading to Adobe Reader XI version11.0

Similar Messages

Maybe you are looking for