Problems with quality of logo images

So I am entering this amateur film contest and have been having some trouble with inserting some pictures.
The rules requires that I include the logos of the companies sponsoring the contest. Those logos can be downloaded here: http://filmfestival.racerxonline.com/ (click on the "download assets" link).
They have most of the logos in .ai format, which on my mac I can view just fine but iMovie09 can't use. I converted them to .jpg, but when I insert them into iMovie09 they get blown up all huge to take up the whole screen and are all pixelated and just look like crap.
I can't seem to find anything to make them smaller in iMovie so I'm wondering what settings I need to change to make it so they don't get blown up and all huge and pixelated and crap looking.

the suffix .ai tells us Adobe Illustrator, a vector format, no use in a video app.
did you try 'Preview' for conversion?
did you try to use Adobe's photoshop.com, the online Photoshop for free?
plus, I would 'assemble' all logos in some paint-app, in final size and position, and create some 1920x1080 or whatever res you need ..

Similar Messages

Hi, I have a problem with my CD Cover image.

Hi, I have a problem with my CD Cover image. I already released my Single to iTunes store. But the quality of Picture is bad'( Not like original one! Could you help me with this pls! Cheer's)

If I was having the problem, I'd remove the email account completely off my iPod then re-add it. If that doesn't work, I'd reset my password and try again. These are all just ideas and not real concrete solutions. Hope something works for you.

I have a problem with loading the PNG image

I have a problem with loading the PNG image from site. For ex. go to icefilms com and is starts to load png like crazy CPU is huge and you can not shut down Firefox at least a minute. This is not just in this site but whit any one whit lots of pictures.
Image from firefox: Picture [http://img836.imageshack.us/img836/9910/7312011103147pm.jpg 1] [http://img28.imageshack.us/img28/8505/7312011103249pm.jpg 2] [http://img706.imageshack.us/img706/5615/7312011103348pm.jpg 3 ][http://img827.imageshack.us/img827/8483/7312011103533pm.jpg 4]
This is my Task Manager [http://img217.imageshack.us/img217/5715/7312011103621pm.jpg 1]
- I try safe mode, same thing
-All addons and plugins are ok
Any idea why is this so big problem.

i did both of them, but still the while sending the mail the diolog box is not showing up and also the spelling and grammer does not do the spelling check.
This problem just started for about 3 to 4 days now. earlier it was working normally.

HT201412 Have a problem with iPad2, apple logo appears but iPad won't boot up, then logo disappears & iPad dies - probably caused due to insufficient hard disk space (too many apps) - any help greatly appreciated

I have a problem with iPad2, apple logo appears but iPad won't boot up, then logo disappears & iPad dies - probably caused due to insufficient hard disk space (foolishly loaded up too many apps) - any help/advice greatly appreciated

What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

I have a HP workforce 610 and cannot scan. I just spoke with HP and they told me it is a software problem with my MAC for image capture. Anyone else having difficulty?

I have a HP workforce 610 and cannot scan. I just spoke with HP and they told me it is a software problem with my MAC for image capture. Anyone else having difficulty?

If Image Capture doesn't work you could try the paid for app VueScan ( www.hamrick.com ). You can try it for free in demo mode to see if it works before purchase.

Have been trying all weekend to upload Jpegs- either Send does not work or shows files uploading then shows error- never had this problem with Send Now-16 images total size 92MB-largest image 13MB

Have been trying all weekend to upload Jpegs- either Send does not work or shows files uploading then shows error- never had this problem with Send Now-16 images total size 92MB-largest image 13MB

Hi Ciaran19,
Are you sending files from the Adobe Send interface, Adobe Reader, or the Outlook plug-in?
Have you checked to see whether the files that you're sending appear in the Recent Files/Sent Files list when you're logged on to https://cloud.acrobat.com? (It could be that they're uploading, but not being sent.)
It would also be worthwhile to send the files in smaller batches, to see whether a particular file or files is problematic, and causing the error.
Please let us know how it goes. If you're still having trouble, please let us know where you're sending from, and whether you're able to send the files in smaller batches. It would also be helpful to know the exact error message that you're receiving.
Best,
Sara

How do I fix problem with linked and cropped image frames not printing properly when spanning pages?

We are using InDesign (ID) to develop and print church bulletins which contain a combination of text frames and graphics. One of the graphic types we use are TIF files which are high-resolution scans of hymns.
A hymn usually has a combination of the musical score, plus the lyrics - with many verses., so the modular structure is 'staff' composed of a treble clef, followed by verses, followed by a base clef.
If the example above had 6 verses instead of one, we would crop the image by adjusting the frame, so that the treble clef and the desired verses showed through the frame.
We would then copy and link the frame - piggy back - adjusting the next content window etc....so we build a custom version of the music as a series of linked frames - each with the same base image, but a different frame position.
So this works fine, when we do this on a single page, but when we then add a 'last staff' at the top of the following page, we encounter print problems with some output devices.
Imagine a two-page spread, with a full page of music on the left, and the last staff (treble clef, verses, base clef) unit as a separately linked frame at the top of the right page of the spread.
It displays correctly, and will print individually as pages correctly, but when we print it as a booklet, the last frame drops out and we have blank space.
I can print the document to PDF and it works fine, but if I print it to a copier or laser printer I get drop out.
It is inconsistent.
Previews are always okay. Individual page prints are okay, but when you print the entire document, the last frame in this kind of linked series gets blanked.
If we create and name the image differently, and call it in as a new image - (not linked to the previous), but it is still a large image that is cropped to a small piece, then it doesn't print.
If we save the last frame as a different image type (take the TIFF file into photoshop, crop it and save it as a jpg - so it is only the 'snippet') and then import it, it works fine.
So my question to you InDesigners....is there some setting or tip or trick I need to know to be able to link a series of frames with the same base image, but different crops and make it span across two pages properly.
Or do we need to play this game of crop and trim the image so that it doesn't drop out?
Any thoughts, advice, direction would be gratefully received!

I did a lot of such hymn things in the past, but I was alway working on the scans in Photoshop, like adjusting, retouching spots and cropping. And I was always seperating those images to be more flexible so I never run into such a problem.
I am always scanning in a higher quality level than I would need, I scan it in color, this allows me to eliminate paper color easily, even if I need 1-bit images at the end, I do it in color, so I can also turn the image.
I did once run into a similar problem with a scan I have got from a copier-scanner machine (it was not a song). But saving as PSD resolved my problem.
So I would suggest: Open your files in Photoshop, resave them as PSD files and use those instead. If you use 1-bit images (which is fine for this type of images) you should use a resolution equal to the printer's resolution.

Problem with alligning text and images

Dear reader
I am having a problem with alligning some content in the left
column of my webpage. It will allign correctly in internet explorer
but I would like it to also allign correctly in Opera and Firefox
as many people use thise browsers also. Here is links to
screenshots to show you what I mean. The problem is highlited in
orange.
http://www.iggpog22.com/mystuff/gap.png
- There is a gap between my starburst logo and the header image
'Links'
http://www.iggpog22.com/mystuff/nogap.png
- There is no gap between my starburst logo and the header image
'Links' in dreamweaver though which is how I would like it to
display.
If anyone could offer some advice I would be very grateful. I
usually try to work stuff out for myself but this problem has me
stumped. I can also provide the html is you need that. Thanks again
for any response.
.Sam
Edit
This is a link to a .rtf file of the code for the webpage
http://www.iggpog22.com/mystuff/ig2code.rtf
you can also visit my webpage at www.iggpog22.com (gotta
include the www. otherwise it shows the wrong site)
I hope this is enough to be more helpful

Posting images aren't that much use I'm afraid. The answer is
in the
code and to solve the issue its more than likely thats what
someone
would need to see to help you.
Can you upload the page somewhere and give a link to it?
02cspearson wrote:
> Dear reader
> I am having a problem with alligning some content in the
left column of my
> webpage. It will allign correctly in internet explorer
but I would like it to
> also allign correctly in Opera and Firefox as many
people use thise browsers
> also. Here is links to screenshots to show you what I
mean. The problem is
> highlited in orange.
>
http://www.iggpog22.com/mystuff/gap.png
- There is a gap between my starburst
> logo and the header image 'Links'
>
http://www.iggpog22.com/mystuff/nogap.png
- There is no gap between my
> starburst logo and the header image 'Links' in
dreamweaver though which is how
> I would like it to display.
>
> If anyone could offer some advice I would be very
grateful. I usually try to
> work stuff out for myself but this problem has me
stumped. I can also provide
> the html is you need that. Thanks aain for any response.
> .Sam
>

Problems with dark Artifacts on images when viewed on PC screens???

I have a very urgent problem concerning Adobe Photoshop CS3, my Apple Cinema 20 inch Display and my SpyderPro2 on my Mac Pro Intel Dual Core Xeon 2x 2.66GHz.
I have been using the Spyder for some years now, but recently I have been having big problems with the results. I only use Photoshop CS3 to enhance digital products images.
I have a major contract with a jewellery company in London, where I clean up digital photos. Images that I have lightened up to look great on my Cinema Display have been reported by my client to look pretty dark on their PC's in their offices.
Some of these images show lines and grubby patches??? To check this I opened files in Photoshop and moved the levels 'black' slider down quite some way, and did see evidence of what the client could see at their end? It seems that when I have used a faded eraser brush it leaves a light patch in between the shadows of the jewellery. This shouldn't be visible to the naked eye though?
I must point out that when I use the eyedropper tool on images, to read the amount of grey or colour in the white areas around the peices, I am shown values of 1,2 or 4 maximum in the CMYK values. 4 percent out of 100 is nothing and should not be visible to the naked eye?
How is it that my clients PC's can see dark shadows and where my eraser brush has rubbed out???
I have tried many re-calibrations and also tested all of my older calibrations dating back a few years. I have also tested the same faulty images on Intel iMac's, an eMac, and a few PC's. On the iMac's I can just about make out the artefacts that my client can see, but nothing that I would deem as unacceptable.
I am at a loss as to the fault, but It may be the Spyder2 Pro's inability to calibrate my Apple Cinema display properly? I may lose my contract which I cannot afford to do, and I simply have to find the cause ASAP.
I have my Mac's in my office apartment next to two bay windows. I have vertical blinds there. When calibrating I have always turned off all the lights and pulled the blinds right back so that only the light from the two large window doors is coming in.
For graphic design the calibrations seemed to be okay for quite some time, but recently it is getting harder to achieve good results with the Spyder? This could affect all of my workflow which is very serious. But I must stress that overall the Spyder results are not terrible. I can see good colours and dark levels and in general across all of my calibrated profiles, the jewellery looks acceptable on my Cinema Display?
I did say to my clients that they should calibrate their PC screen properly but their offices have many Screens and they all show the same artefacts (some much worse than others)? I know that PC Screens are darker than Mac's but a 4% grey should not be visible????
As these are a web company the images will be seen by PC users around the world and most of these will have no calibration on their screens. What can be done to prevent this and what is the cause of this? I can't possible please everyone, but as a creative professional I have to be 100% certain that my workflow is at its best.
I need urgent help to solve this or loose valuable business? I hope that you are able to help solve this mystery. Could this possibly be something with Photoshop?
I have just purchased the new Spyder3 Pro which I hope will give perfect results but I have to find out what the cause of this is. If some of the fault lies with the client, I can charge these for all the testing and calibrating I have done.
Kind regards,
Jason Conway
ideo-sync - inspired design.

Thanks for all your comments and so quickly.
To be clearer, I am not working in CMYK for image enhancing at all, but windows RGB in photoshop, which is darker than working CMYK or Monitor RGB. I just use the CMYK colour scale in the photoshop colour picker window to see what values are around the object.
its not 4 across all four but on average C4, M2, Y1, K0.
When saving in save for web the images look fine on my screen, pretty much the same as the photoshop tiff file.
Each image has adobe RGB 1998 embedded when saved as a tiff file.
The client looks on internet explorer 7 on their PC's and also within Photoshop.
Colour settings within photoshop are using MacUser magazine's recommended setting from 2006: RGB: Adobe RGB 1998, CMYK: Euroscale Coated V2, Grey: Generic Grey, SPOT: 20% dot gain. Engine: Apple CMM, Intent: Relative Colorimetric. Also Black point compensation and User Dither are checked.
Also the monitor calibration is set at 6500 at 2.2 gamma.
To be clearer about the dark shadowing and the artefacts. When using levels I click on a shadow point to remove all but a slight shadow. Then I sometimes need to use the faded eraser to clean up or lessen the shadow. The image looks fine on my screen, but in the levels window I drag the black pointer about a third of the was across the screen to simulate what the client is seeing on their screen. This is quite a long way to drag the slider. I can sometime see the edges of the image, or white holes where the eraser has been. The lines are areas around the object that have been rubbed out a bit.
I agree that colour values will show on a screen, but the effect of the shadow should be smooth and not clearly visible with an edge?
http://www.ideo-sync.co.uk/p110741.jpg
also p110741.tif
I have uploaded the layered tiff file and the web jpeg to my server, so you can hopefully see something odd?
If there is a problem with my cinema display at least its under warranty, and the new Spyder3 pro should help when it arrives in a few days time.
Hopefully I can pinpoint the exact cause to this and take steps to stop this ever happening again. I am very grateful for your advice and help.
Kind regards,
Jason.

Problem with AppleTV (freezes the image on some movies)

Hi! I'm having some problems with my new appletv. I have some movies who freezes the image when I was watching it. Always stop the image on the same frame but when I check it on my imac with itunes I can see it without problems. Someone knows where is the problem?

Hi, thanks for your reply. It happens in a boxing combat fight and in a Dexter episode. I convert it to .m4v (appletv format) and I can see it perfect in itunes on my imac but on my appletv it freezes always in the same frame. I copy the movie to itunes and after I sync and copy it to my appletv. Is weird cause I saw the Dexter episode 1 and 3 but the 2 freezes on 20min.

Problem with dimension of an image loaded from a database

Hi,
I succeed in saving image in a MSAccess database with this code:
Image img;
image = new ImageIcon("d:\\prova\\comore.jpg");
img=image.getImage();
try{
int[] pix = new int[img.getWidth(null) * img.getHeight(null)];
PixelGrabber pg = new PixelGrabber(img, 0, 0, img.getWidth(this), img.getHeight(this), pix, 0, img.getWidth(this));
pg.grabPixels();
System.out.println(pix.length);
byte[] pixels = new byte[img.getWidth(this) * img.getHeight(this)*4];
for(int j=0;j<pix.length;j++){
pixels[j] = new Integer(pix[j]).byteValue();
String sql="insert into Immagini values ('1',?)";
PreparedStatement ps = con.prepareStatement(sql);
ps.setBytes(1,pix);
ps.executeUpdate();
}catch(Exception except){
except.printStackTrace();
then, I've load the image with this code:
try{
String query = "select * from Immagini where IDprog = 1";
Statement s = con.createStatement();
s.executeQuery(sql);
ResultSet rs=s.getResultSet();
rs.next();
Viaggio vi = new Viaggio(rs.getInt(1),rs.getBytes(2));
byte[] b=vi.getBytesImage();
int[] intImage = new int[b.length];
for(int j=0;j<b.length;j++){
intImage[j]=(int)b[j];
Image img = createImage(new MemoryImageSource(124,100,intImage,0,124));
ImageIcon imgic = new ImageIcon(img);
jLabel3.setIcon(imgic);
}catch(Exception tps){
tps.printStackTrace();
All works correctly;
but I've two problems:
How do I do to take the dimension of the image from the byte array?
infact in the code up written I've used 124 and 100 as image dimension;
but I can have images of different dimension.
The other problem is:
Why in the image that is loaded are not the same number of colors of the image saved, but only a few, so that the image seems to be out of focus?
Thank and excuse me for my english.
I'm Italian.

Noone can help me?
Thank

Problem with "Insufficient data for image" and embedded JPEG 2000 Images

I frequently download pdf from the http://www.glorecords.blm.gov web site. They are reporting a problem with Reader Reader 10.1.4 and the pdf files they have.
"("Insufficient data for image" and embedded JPEG 2000 Images)"
I am experiencing the same "Insufficient data for image" error when opening their downloaded pdf and viewing in ACROBAT X 10.1.4.
Can someone address this please?
Win 7 sp1

Read this:
http://blogs.adobe.com/dmcmahon/2012/08/21/acrobat-insufficient-data-for-an-image-error-af ter-updating-to-10-1-4-or-9-5-2/

Problem with size of printed images

I am trying to change the size of various images I want to print. For example, I would like to print a page that has four of the same image on it - each the 3-1/2 X 5 in. size. I've done it in the past, but I think it was on my older HP printer. When I set my preferences to print, the preview shows the page as being set up to print four images per page, but when I print, the images come out very small, and on the upper right corner of every page. Last night I uninstalled and reinstalled the printer with the latest driver, and when I tried it again, the images were slightly larger, but they all printed from top to bottom of the left side of the page. Is the problem with the image itself, the program I'm using to print (Windows Photo Viewer), or with my printer settings? I'm totally confused and frustrated!

I would give you a big kiss!
just a kiss is ok.. If I have a choice, I would prefer one from a "Magdalena", not a "Majk"..
to rotate a movie 90° follow this illustrated advice:
http://karsten.schluter.googlepages.com/rotate2
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
that needs purchasing a QTpro license ...
the free tool MPEG Streamclip offers rotation too, advice given here:
http://www.sjoki.uta.fi/~shmhav/SVCDon_a_Macintosh.html#vert-horizrotate
(you probably stumble into cropping problems with that method ... )

Problems with Quality of Raw file when pulled into Photoshop

I use Photoshop CS3 with ACR plugin version 4.6.0.30 installed. When I pull my RAW files into it, I seem to lose a lot of information. For example I took a picture of my black dog. I set the camera (Canon 40d) to save the file in both RAW and high res JPG. When I pull both files directly into photoshop the JPG has more detail information in the highlights and shadows than the RAW file does. This should be the reverse. To see if the problem was in the file or in the process of pulling it into photoshop I also pulled it in through Lightroom. Then I used Zoom Browser (software that came with my camera). Zoom Browser forced me to convert to a TIFF before importing it to Photoshop. I'll try attaching a file I made that shows the results of each.
My conclusion is that there is not a problem with the CR2 file, since the CR2 file converted to the TIFF has the most detail, but something is happening when I import it into photoshop. I just don't know what settings I should be looking at to fix this problem. Any help would be appreciated.
Here's a link to the example:
http://www.reflections-etc.com/problem_with_RAW.jpg
Thanks

pcather wrote:
My conclusion is that there is not a problem with the CR2 file, since the CR2 file converted to the TIFF has the most detail, but something is happening when I import it into photoshop. I just don't know what settings I should be looking at to fix this problem. Any help would be appreciated.
Camera Raw 101: ACR has different baseline "Defaults" than the Canon software, therefore you will need to make your own adjustments–and perhaps save out a new ACR Default. Canon's software only has to worry about a small sampling of cameras. Camera Raw supports over 230 cameras' raw files. As a result Canon's software tends to match the in camera JPEG and the camera's LCD by default.
Camera Raw on the other hand is more concerned offering a normalized default rendering of the raw data. Rather than trying to force a certain "look" (generally higher in contrast and more saturated) ACR will show the raw data a bit flatter and less saturated.
Fact is, Camera Raw has a huge number of controls for the express purpose of allowing the user to maintain total control over the rendering of the raw data...what you need to do is learn how to use all the sliders....

Problems with quality of image since upgrading to Adobe Reader XI version11.0

Since installing the new update I seem to be having a problem scanning files to PDF - first the scan missed off the bottom over every page but after several hours of changing settings on the computer and on the scanner (and actually uninstalling all printer and adobe software and reinstalling it again), this now seems to be ok - but the quality of the PDF is quite poor.
I can't work out how to get a better quality and I am sure it is something to do with PDF / Adobe because when I scan the document and save it as word / TIFF / JPEG, the image is brilliant. I also can't seem to save any of the TIFF / JPEG files to PDF.
Any ideas? The above problem is happening on my MAC and on the integrated Windows 7 via VMFusion Ware.
Thanks

Good Day! I also noticed that after I installed the Adobe Reader XI Version 11.0.1 that the image quality is very poor unless you zoom in a lot. If I open the same PDF file with Adobe Acrobat Standard 9.0, the image quality is very good. There must be an issue with Reader XI Ver 11.0.1. Also, I have found that if I select text and copy it to the clipboard, an error message pops up. The text is, in fact, copied to the clipboard, so I don't know what the error is. The error box is created by Adobe, not Microsoft Windows.

Problems with quality of logo images

Similar Messages

Maybe you are looking for