Problems with recent system update

All my problems started with the most recent software update. I did the most recent set of updates which required a restart. After restart, I noticed that it was taking a REALLY long time to load up, so I left it over night and came back in the morning. I thought "hmmm 10 hours, maybe it'll take 16", so I went to work. Came home, still hanging at the gray Apple startup screen. Finally, I called Apple and they told me to force shut down, unplug for 15 seconds and retry. Followed these instructions, still got the little logo. Finally the gentleman tells me to force shutdown, and reset the pram (CommandOption+PR). This REALLY screwed things up as now I am stuck at a blank screen with NO Apple logo. I have tried every keyboard shortcut imaginable, to no avail. Anybody else had this problem? "Guess you have to take it to an Apple genius" is the final response of my phone call. Well, 4 hours to the nearest Apple store isn't something I want to do. Also, considering all was well before the System Update, paying for shipping/repair is also not something that I want to swallow. Any suggestions would be great.

OK you did a SMC reset and then seperatly did a PRAM reset. Now try doing them in this sequence and your system should start OK.
1. Turn off your iMac and unplug everything from it for 30 seconds.
2. Plug in the power cord, keyboard and mouse only.
3. Press the power button and immediately hold down the Option, Command, P & R keys until you hear the second gong then release the keys. Your machine will start up normally, then check for the issues you are having.

Similar Messages

Problems with recent software update

Hey all,
recently came to check on my intel iMac (leopard) if there were any software updates. Turns out that there was an update for quicktime and a security update.
Choosing to install said that I had to restart my computer. Restarting the computer lead to a blue screen appearing with the "moving circle" in the lower part of the screen.
This stayed for around 25 mins before the screen turned black.
After around 10 mins, I chose to force restart the computer. It restarted as normal and it seems that the updates have installed (they are no longer in the software update list).
I'm still a little concerned though, as I havent seen this before. Any one else had any problems running updates under leopard??
Ross

Thank you for your reply. I followed your suggestion and restored my iPod to its factory settings. I then restored it from a backup file. All the problems have been resolved. Quite incredible that I had to go through that process to fix it. I hope Apple will find a solution to the iTunes problem soon.

Problems with recent security update

Ever since I installed the latest security update, I have had one problem after another. My software programs - Acrobat, QuarkXpress, Firefox, Photoshop - have all frozen and given me the "program not responding" message numerous times. I actually reinstalled Acrobat. Haven't used it much since, so I'm hoping it is fixed. Any suggestions? This is really frustrating.

Start by Verifying, then if necessary, repairing the Drive. Open up Disk Utility in Applications>Utilities. Select the boot Volume that is being used (in most cases it's the same as the Drive listing; it will probably be called Hard Drive or Macintosh Hard Drive. If you only have one Volume, you can select either) and Verify. Repair will be grayed out. If any errors are reported, then you will need to boot from your install disk.
http://support.apple.com/kb/TS1417
For instructions, skip down to the section "Try Disk Utility"

Problem with recent itunes updates

The last 3 updates to itunes will not install. What do I do ?

How about some details regarding exactly what is happening, any error messages?
Have you tried disabling the Anti-Virus or Firewall software on your computer temporarily to install the update?

HT201250 Problem with recent Excel 2011 update

I installed an update to Mac Excel 2011 yesterday. It complete sucessfully but the VBA component is now missing. All Exel files with VBA code now cannot be opened. The following message is shown for each:
Excel could not open xxxx.xlsm because some content is unreadable. Do you want to open and repair this workbook?
I attempted to use the Time Machine to restore the Excel applicatiion but it will not run because it says Excel is open when it is not.
Has anyone had a similar problem with the latest update to Excel?

I bought a refurb ipad 32gb. I have noticed when itunes via wifi fails to do an app update, it screws the whole ios; thereby forcing ipad to go into recovery mode. I thought Apple learned the hard way not to allow one app to bring down the whole os!! This is the 5th time an app caused this. last time Apple forced me to reinstall Itunes, wasted 2 hrs.
I worked hard saving up enough funds to get an iPad. Yes, i even paid Applecare too. If this can be fixed, I want a replacement or a full refund.

Weird Problems with K9A2 System

Can Someone Help Me?
I recently built a new system and have had nothing but problems. See system config in signature (Left off OCZ PRO Xtreme 1000W Power Supply With 4 12 Vrails at a max of 26 Amps each or 82 Amp all together and a 5 Volt rail at 30 Amps Max.) After putting it all (except the seagate 250 IDE drive), system would not even enter post. After strippin memory down to just 2 GB system finally entered post (although my memory were the same models from G.Skill one set was older and one set was new they had different voltages old required 1.9-2.0 while the newer worked at the default 1.8 voltage all timing and specs besides voltage were the same). I entered the bios setup and set my Memory voltage to 1.95 (What I had been runnin the older memory in my old system). Inserted all the memory back in and system booted right up to allow me to install my OS (Vista Home Premium 64-bit).
After the OS installed the system started having all kinds of wierd clitches/problems at one point it locked up and neither reset button nor the power button would work. After unplugging the power I noticed that the M connector for the front case switches was a little loose. I decided to just plug wires directly into board instead of using th M connector. Now my buttons worked again. I then proceded back into the bios and checked my voltages in the hardware monitor of the bios. All voltages looked to be fine with only an ocassional voltage fluctuation in the 5V line from 4.97 to 4.92 Volts and the 12V line was a little high 12.4 Volts. However, after booting back into vista and installing Everest Ultimate Edition it detected the that the 5 Volt line was only at 4.67 Volts. But was not fluctuating at all.
After installing the drivers for my system and proceding to install my anti-virus software the system started freaking out the mouse started lagging and sometimes not responding at all and the keyboard worked intermittently. I decided to remove the M connectors from these as well and that solved that problem. Upon rebooting the system and trying to install the Anti-Virus software again the system started telling me that I had just plugged in something to the audio connector. I had not so I just ignored it and continued to install my anti-virus. (the audio connector alert popped up 4X while I was finishing the installation of the software. I decided to test the audo so I but a DVD in and and watched the whole movie sound worked fine and no more pop ups about the audio connector until I started to install more software. During the next install of software the screen went black and the DVD and Hard Drive LED stopped flashing. It stayed this way for about 10 Min. I decided to hit the reset button and the system would not enter post again.
Once again I started to pull the Memeory It finnally worked after removing the new memory that I had just bought but none of my Maxtor hard drives were recognized and I started smelling smoke. ( Strange only the Maxtor drives went out, all had the interface boards and one chip on each drive fried. After disconnecting these drives and replacing the maxtor 120 GB IDE drive that had fried with a Seagate 250 GB IDE drive and reinstalling everyting onto it since the maxtor was my boot drive the system started up and was running fine except for the occasioal audio connector popup I finished Installing the rest of my software and everything was running good. So I assumed the problems were due to faulty ram. I contacted NewEgg and arranges for an RMA on the memory went shipped the memory back to NewEgg came back and started to move file some file to my NAS200 After about 4 hours the system locked up again (It had been almost 36 hours since I had had anyother problems with the system and it had not been turned off the whole time. All temps were good CPU was at 29C and GPU was at 46C system temp was 31C according to my Everest Ultimate so I didn't think it was a heat related issue)
Upon restarting my computer I got a message that a recent overclocking attempt had failed (I did not try to overclock!!) After going back into Bios and resetting all my settings the computer would not post agian. I tried to clear the CMOS with the jumper just to make sure that there wasn't any coruption inthe CMOS. Still no Luck. Pulled out one stick of the older ram and it booted but very slow. I went to a local parts dealer and bought some extremely over prived memory just so I could get my system back to 2 GB because I had video edditing software that didn't work very good on 1 GB. After installing no post again. So I started testing each stick of memory that I had in DIMM 1 they all worked but anytime I insert one into DIMM 2 it would not boot. Finnally I but 2 sticks into DIMM 3&4 and It started up and ran good. I decided to set my bios Unganged option to enabled and put memory back into DIMM 1 No luck would not post. I removed the memory from DIMM 1 and computer has worked ever fine except for an error coming out from sleep mode. (Never had a computer that didn't have a problem with that) I even updated the BIOS to 1.5 which was suppose to fix the wakeup problem.
So here is what I have I can use Dimm 1 by itself or I can use DIMM 3&4 but not both together. I'm about to buy a Power Supply (single 12V rail at 40 Amps and a 5V rail at 50 Amps) because I think that the 12 V reading as 12.4 and the 5 Volts reading as 4.67 in Everest Ultimate and 4.97 volts in Bios might have something to do with some of my problems. I did not check the Memory that I RMA'd by them selves on DIMM 3&4. I think that they may have been good now.
Can the 5V line registering the way it is 4.97 Bios/4.67 in Windows cause DIMM 2 to not function and create the lockups or can the socket or board be bad and that be what is causing this problem? And Should I RMA the motherboard back or just purchase a different motherboard?
System is pretty Stable as it is now with the voltages as they are. I really wantt to be able to put my new memory that I get back from NewEgg in and have my 4 GB of memory.

OK I have removed the mother board and and checked for grounding issue or any damage from the fried hard drives board looks good did not find any grounding issues in the case. One thing I did not check was that I was using a Startech SATA to IDE converter to connect the the IDE drives that I didn't have the connectors on the board or.
I did some research before buying them and made sure to get one with a plastic box around the pcb due to so many people compaining that their's would short to the hard drive case. Since the loss of the HDD I didn't need the adapter so I quit Using it.
when I did my research on the adapter I found that many people had said that their HDD got hoter when using the adapter I guess my HDD just couldn't handle it. The Drive that I had connected with it was about 6 years old and I had been having intermittent problems with the connector not making a good connection when it was in my old system. (Anytime I would shut the power off for a long period of time and the HDD had a chance to cool down I would have to unplug and reconnect the ide cable from that drive.)
I didn't think that the problem would continue as I was moving it to an new case, motherboard, and cable.
And it just so happened that the drives that fried were all connected the the sata controller in the SB600 chip. My two SATA drives that survied the fire were on the Promise T3 controller. So I guess it is possible that the adapter/HDD configuration I had with the SATA to IDE caused some sort of feedback into the Motherboard's SATA controller and back into the oter HDD on that Controller. I have checked all SATA ports since this happened and they all still work so I'm assuming that it did not damage the chip.
As far as the memory situattion I don't see how the HDD frying could have damaged the Memory unless there is some special connectin between DIMM2 and the SATA controller that doesn't exist with the other DIMM slots. and if it had somehow effected the memory controller to cause this problem I would assume it would have done alot more damage to the cpu than just the memory controller part. So I think I'll try to RMA a new motherboard, if ZippZoomFly will let me this long after getting the board I've had it for about 3.5 weeks waiting on the other parts for the new system) and see what happens.
As for the memory, itself they are not mixed brands or models. I bought one set about a year ago when I purchased my X2 6000 processor and they have worked great as long as I kept the voltage above 1.9 V. The new memory has the same model # as the old but the label on them states the same timings and only a different voltage range. So as long as they voltage was set to within the range of both sets they should work exactly the same. I did notice that the board would only detect 3.25 GB instead of 4 GB, and I was prepared for this. Every Motherboard I have ever owned, no matter who the Manufacturer was, has had this problem. However Vista reported the memory correctly.
I guess if the new motherboard exhibits the same memory problem with not letting me use all slots then i'll buy a 2X2GB set

Why after a recent systems update, I can't copy text from the internet (every web page) and paste into word?

MacBook Pro Community,
I need help. After a recent systems update this week, I can not longer copy and paste text from the internet. I have never had this problem before. I have searched through systems preference and google'ed it. Please help!!
Thank you!

A book is a lot of work and in the end needs to not only be openable, printable, but also be laid out with facing pages amongst other numerous desirable features.
None of which suggest Pages 5 to me.
If you want to persist in Pages 5.5 you will have to laboriously cut and paste the content into one file and hope that will still be usable when you are finished.
Or you could export to Pages '09 or pdf format and assemble it there.
Peter

LCDS is non-compatible with recent MS updates

I have been using the LCDS app for a couple of years without any problems. Recent MS updates seem to have had a negative impact on using this application. The application launches but does not function. I've uninstalled and reinstalled the application. It
will not access course files and new courses cannot be created.
If this application is no longer supported by MS, we will be forced to search for another course authoring tool to create SCORM objects for our learning management system.
Please assist. Thank you.
~Dawn

The only thing about Avast that might not be compatible is their Web Rep extension for Firefox. If that is the case, it is up to Avast to keep their Firefox add-on up-to-date as Mozilla releases new versions of Firefox. Did you check with Avast to see if an update is available? If there is, you probably need to have Firefox 5.0 installed to be able to install that update.
http://forum.avast.com/

Recent System Update ate my wireless?

I just got done with the recent system update to 10.3.9 on my PowerBook G4 550. Since the update I've been:
-Unable to connect iTunes (7.0.2) to my Airport Express. I can connect to the wireless network on occasion (see below) but iTunes even after I restart iTunes while connected to the network.
-While trying to connect to my wireless network (Airport Express) my menu bar freezes. The Airport icon is painted blue and will nor respond. When this happens my time freezes as well. It's now been like this for 8 hours. If I go into System Utilities->Network->Airport the system freezes as well.
I anyone else having a similar problem with the recent update?

After the update my G3 iBook can not see the Airport card. I am still troubleshooting and in fact was hear looking for a solution. If I find a fix I will post it.
Okay I repaired permissions and did a restart and now the Airport shows in the profile and I can connect via Airport. I don't know if it was the permission repair, the restart, or the combination of the two, but I will have to hold on buying a MacBook a little longer.
Message was edited by: Computer Arts

Mapping problem with compressed key update record

Hi, could you please advise?
I'm getting the following problem:
About a week ago replicat abened with "Error in mapping" error. I found in discard file some record looking like:
filed1 = NULL
field2 =
field3 =
field4 =
field5 =
datefield = -04-09 00:00:00
field6 =
field8 =
field9 = NULL
field10 =
Where filed9 = @GETENV("GGHEADER", "COMMITTIMESTAM"), field10 = = @GETENV("GGHEADER", "COMMITTIMESTAM"), others are table fields mapped by USEDEFAULTS
So I got Mapping problem with compressed key update record at 2012-06-01 15:44
I guess I need to mention that extract failed in 5 minuts before it with: VAM function VAMRead returned unexpected result: error 600 - VAM Client Report <[CFileInfo::Read] Timeout expired after 10 retries with 1000 ms delay, waiting to read transaction log or backup files. To increase the number of retries, use SETENV (GGS_CacheRetryCount = n) in Extract parameter file. To control retry delay time, use SETENV (GGS_CacheRetryDelay = n). handle: 0000000000000398 ReadFile GetLastError:997 Wait GetLastError:997>.
I don't know if it has ther same source as data corruption, could you tell me if it is?
Well, I created new extract, starting 2012-06-01 15:30 to check if there was something with extract at the time, but got the same error.
If I run extract beging at 15:52 it starts and works.
But well, I got another one today. Data didn't look that bad, but yet one column came with null value:( And I'm using it as a key column, so I got Mapping problem with compressed key update record again:(
I'm replicating from SQL Server 2008 to Oracle 11g.
I'm actually using NOCOMPRESSUPDATES in Extract.
CDC is enabled for all tables replicated. The only thing is that it is enabled not by ADD TRANDATA command, but by SQL Server sys.sp_cdc_enable_table, does it matter?
Could you please advise why does it happen?

Well, the problem begins somewhere in extract or before extract, may be in transaction log, I don't know:(
Here are extract parameters:
EXTRACT ETCHECK
TRANLOGOPTIONS MANAGESECONDARYTRUNCATIONPOINT
SOURCEDB TEST, USERID **, PASSWORD *****
exttrail ./dirdat/ec
NOCOMPRESSUPDATES
NOCOMPRESSDELETES
TABLE tst.table1, COLS (field1, field2, field3, field4, field5, field6, field7, field8 );
TABLE tst.table2, COLS (field1, field2, field3, field4 );
Data pump:
EXTRACT DTCHECK
SOURCEDB TEST, USERID **, PASSWORD *****
RMTHOST ***, MGRPORT 7809
RMTTRAIL ./dirdat/dc
TABLE tst.table1;
TABLE tst.table2;
Replicat:
REPLICAT rtcheck
USERID tst, PASSWORD ***
DISCARDFILE ./dirrpt/rtcheck.txt, PURGE
SOURCEDEFS ./dirdef/sourcei.def
HANDLECOLLISIONS
UPDATEDELETES
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
MAP dbo.TPROCPERIODCONFIRMSTAV, TARGET R_019_000001.TPROCPERIODCONFIRMSTAV, COLMAP (USEDEFAULTS , field5 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed6= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (filed1, field2, field3);
Rpt file for replicat:
Oracle GoldenGate Delivery for Oracle
Version 11.1.1.1 OGGCORE_11.1.1_PLATFORMS_110421.2040
Windows x64 (optimized), Oracle 11g on Apr 22 2011 00:34:07
Copyright (C) 1995, 2011, Oracle and/or its affiliates. All rights reserved.
Starting at 2012-06-05 12:49:38
Operating System Version:
Microsoft Windows Server 2008 R2 , on x64
Version 6.1 (Build 7601: Service Pack 1)
Process id: 2264
Description:
** Running with the following parameters **
REPLICAT rtcheck
USERID tst, PASSWORD ***
DISCARDFILE ./dirrpt/rtcheck.txt, PURGE
SOURCEDEFS ./dirdef/sourcei.def
HANDLECOLLISIONS
UPDATEDELETES
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
MAP dbo.TPROCPERIODCONFIRMSTAV, TARGET R_019_000001.TPROCPERIODCONFIRMSTAV, COLMAP (USEDEFAULTS , field5 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed6= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (filed1, field2, field3);
CACHEMGR virtual memory values (may have been adjusted)
CACHEBUFFERSIZE: 64K
CACHESIZE: 512M
CACHEBUFFERSIZE (soft max): 4M
CACHEPAGEOUTSIZE (normal): 4M
PROCESS VM AVAIL FROM OS (min): 1G
CACHESIZEMAX (strict force to disk): 881M
Database Version:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
Database Language and Character Set:
NLS_LANG = "AMERICAN_AMERICA.CL8MSWIN1251"
NLS_LANGUAGE = "AMERICAN"
NLS_TERRITORY = "AMERICA"
NLS_CHARACTERSET = "CL8MSWIN1251"
For further information on character set settings, please refer to user manual.
** Run Time Messages **
Opened trail file ./dirdat/dc000000 at 2012-06-05 12:49:39
2012-06-05 12:58:14 INFO OGG-01020 Processed extract process RESTART_ABEND record at seq 0, rba 925 (aborted 0 records).
MAP resolved (entry tst.table1):
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
2012-06-05 12:58:14 WARNING OGG-00869 No unique key is defined for table table1. All viable columns will be used to represent the key, but may not guarantee uniqueness. KEYCOLS may be used to define the key.
Using the following default columns with matching names:
field1=field1, field2=field2, field3=field3, field4=field4, field5=field5, field6=field6, field7=field7, field8=field8
Using the following key columns for target table R_019_000001.TCALCULATE: field3.
2012-06-05 12:58:14 WARNING OGG-01431 Aborted grouped transaction on 'tst.table1', Mapping error.
2012-06-05 12:58:14 WARNING OGG-01003 Repositioning to rba 987 in seqno 0.
2012-06-05 12:58:14 WARNING OGG-01151 Error mapping from tst.table1 to tst.table1.
2012-06-05 12:58:14 WARNING OGG-01003 Repositioning to rba 987 in seqno 0.
Source Context :
SourceModule : [er.main]
SourceID : [er/rep.c]
SourceFunction : [take_rep_err_action]
SourceLine : [16064]
ThreadBacktrace : [8] elements
: [C:\App\OGG\replicat.exe(ERCALLBACK+0x143034) [0x00000001402192B4]]
: [C:\App\OGG\replicat.exe(ERCALLBACK+0x11dd44) [0x00000001401F3FC4]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x000000014009F102]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x00000001400B29CC]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x00000001400B8887]]
: [C:\App\OGG\replicat.exe(releaseCProcessManagerInstance+0x25250) [0x000000014028F200]]
: [C:\Windows\system32\kernel32.dll(BaseThreadInitThunk+0xd) [0x000000007720652D]]
: [C:\Windows\SYSTEM32\ntdll.dll(RtlUserThreadStart+0x21) [0x000000007733C521]]
2012-06-05 12:58:14 ERROR OGG-01296 Error mapping from tst.table1 to tst.table1.
* ** Run Time Statistics ** *
Last record for the last committed transaction is the following:
Trail name : ./dirdat/dc000000
Hdr-Ind : E (x45) Partition : . (x04)
UndoFlag : . (x00) BeforeAfter: A (x41)
RecLength : 249 (x00f9) IO Time : 2012-06-01 15:48:56.285333
IOType : 115 (x73) OrigNode : 255 (xff)
TransInd : . (x03) FormatType : R (x52)
SyskeyLen : 0 (x00) Incomplete : . (x00)
AuditRBA : 44 AuditPos : 71176199289771
Continued : N (x00) RecCount : 1 (x01)
2012-06-01 15:48:56.285333 GGSKeyFieldComp Len 249 RBA 987
Name: DBO.TCALCULATE
Reading ./dirdat/dc000000, current RBA 987, 0 records
Report at 2012-06-05 12:58:14 (activity since 2012-06-05 12:58:14)
From Table tst.table1 to tst.table1:
# inserts: 0
# updates: 0
# deletes: 0
# discards: 1
Last log location read:
FILE: ./dirdat/dc000000
SEQNO: 0
RBA: 987
TIMESTAMP: 2012-06-01 15:48:56.285333
EOF: NO
READERR: 0
2012-06-05 12:58:14 ERROR OGG-01668 PROCESS ABENDING.
Discard file:
Oracle GoldenGate Delivery for Oracle process started, group RTCHECK discard file opened: 2012-06-05 12:49:39
Key column filed3 (0) is missing from update on table tst.table1
Missing 1 key columns in update for table tst.table1.
Current time: 2012-06-05 12:58:14
Discarded record from action ABEND on error 0
Aborting transaction on ./dirdat/dc beginning at seqno 0 rba 987
error at seqno 0 rba 987
Problem replicating tst.table1 to tst.table1
Mapping problem with compressed key update record (target format)...
filed1 = NULL
field2 =
field3 =
field4 =
field5 =
datefield = -04-09 00:00:00
field6 =
field8 =
field9 = NULL
field10 =
Process Abending : 2012-06-05 12:58:14

Workstation specs -- Any problems with this system quote?

Here are the specs I have been quoted. I'm not terribly knowledgeable about hardware, does anyone see any problems with this system? I have recently started shooting and editing weddings, engagements and corporate videos. I think it may be bit more than I need, but I would much prefer that to less than I need. Any input from the more tech savvy users would be much appreciated.
Darren Breckles
65539
ASUS Sabertooth X79 ATX LGA2011 DDR3 3PCI-E16 2PCI-E SATA3 USB3.0 SLI CrossFireX Audio Motherboard [Sabertooth X79]
72374
Mushkin Enhanced Blackline Frostbyte 32GB 4X8GB PC3-12800 DDR3-1600 CL10 Quad Channel Memory Kit [994055]
64540
Noctua NH-D14 SE2011 LGA2011 Heatpipe Cooler w/ NF-P14 140mm & NF-P12 120mm PWM Fans [NH-D14 SE2011] [Reg. $89.99]
67678
Intel 520 Series 240GB 2.5in SSD MLC 25nm SATA3 Solid State Disk Flash Drive OEM [SSDSC2CW240A310] [Reg. $279.99]
4729477
8 port internal via 2X SFF-8087, LSI2208 1GB cache, 6Gb/s, RAID 0/1/10/5/50/6/60 [RS25DB080]
1
84358
MSI GeForce GTX 770 OC Twin Frozr IV 1098/1150MHZ 2GB 7GHZ GDDR5 2xDVI HDMI DP PCI-E 3.0 Video Card [N770 TF 2GD5/OC] [Reg. $429.99]
62678
ASUS BW-12B1ST Blu-Ray Writer 12X BD-R 16X DVD+R SATA Black Retail [BW-12B1ST/BLK/G/AS][Reg. $89.98]
Environmental Fee $0.75 Per Item
45275
Microsoft Windows 7 Professional Edition 64Bit DVD SP1 OEM [FQC-04649] [Reg. $153.98]
75044
Fractal Design Define R4 ATX Tower Case Black Pearl 2X5.25 8X3.5INT No PSU Front 2XUSB3.0 Audio [FD-CA-DEF-R4-BL] [Reg. $119.99]
77641
Corsair AX860 860W ATX 12V V2.31 80 Plus Platinum Modular Power Supply Active PFC 120mm Fa *IR-$10* [CP-9020044-NA] [Reg. $189.89]
49665
nMedia ZE-C118 3.5in Multi Function Panel Flash Card Reader W/USB2.0 eSATA SDHC2.0 Win 7 Black [ZE-C118 ] [Reg. $19.99]
58276
StarTech.com 3.5in Hard Drive to 5.25in Front Bay Bracket Adapter [BRACKETFDBK]
78186
Noctua NF-A14 FLX 140mm Ultra Quiet Cooling Fan 900-1200RPM 115.5M3/H 19.2DBA 3-PIN [NF-A14 FLX] [Reg. $22.99]
4
22823
Premium PC Assembly and Testing With 1 Year Limited NCIX Warranty (PRE-CONFIG WIN. OS If Purchased)
Environmental Fee $3.00 Per Item
Note: Includes extra attention to cabling, lighting installation and extra burn-in period. Recommended for windowed cases. Assembly requires an additional 4-5* business days to ship once all parts are in stock. *typical lead time (currently 2-5 business days)
1
$3.00
73920-1
NCIX 3 Year On-Site Care Coverage for PC $3000.00 - $3999.99 (22823)
89510
Intel Core i7 4930K 6 Core 3.4GHZ (3.9GHZ Turbo) 12MB Hyperthreading LGA2011 Processor No HSF [BX80633i74930K] [Reg. $649.99]
81958
Western Digital RE 2TB SATA3 7200RPM 64MB Cache 3.5in Internal Hard Drive [WD2000FYYZ] [Reg. $213.57]
Environmental Fee $0.75 Per Item
4

Very nice build list Darren!
I would have selected the Samsung 840 Pro 256GB SSD over the Intel 520, and Areca's ARC-1882i over the Intel SAS controller you list, but those are preferences not essential changes.
Regards,
Jim

HT1338 With recent iphoto update, i can't seem to open any photos. They appear but when i dble click to select a photo to work with, no luck. Any help?

With recent iphoto update, i am having problems opening individual photos. The photos are there when i scroll through, but when i select one to work with, nothing opens. Any suggestions?

Thanks for your reply. I did this, but I still can't open any photos when clicked on; "Faces" don't appear over names; when I try to upload a photo while in facebook...I can't. I think this is when i first discovered the problem. Don't know what else to do except take in laptop.

Problems with software the update with Nokia 6233

Problems with software the update with Nokia 6233
Hello,
I have so far some-paints tries my software to update.
Each time the update procedure begins, sometime stands then on the telephone “test mode”.
On the computer wars I the reference in the update manager “connection to the telephone broken off” and wants the update to again start.
If I change my profile attitudes since that for example, then after a telephone restart again deleted.
What there can I make?
GreetingsMessage Edited by adisaily on 24-Aug-2007 09:03 AM

It sounds like your 5800 has the earpiece fault that was common with 5800's made before February.
You need to take it to a nokia care point for repair under warranty.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair.

I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add

I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add APN. Now when i switch to safari its showing you are not subscribed for cellular data. But I am able to use data on other phone.
Will you please help me in this regard?
Another issue, since i bought my new iphone there is dust inside back main camera.
Your advises are highly appreciated.

Hey Shaiju isac,
I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Cheers,
David

Mapping problem with compressed key update record (target format)...

Hi Guys,
Getting below error while replication from Source to target. Source table is having NOT NULL Column, but on target replicat process giving error about some NULL value ??
How to overcome this issue, any idea...
2011-08-04 10:35:04 INFO OGG-00995 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: REPLICAT RMASTRK starting.
2011-08-04 10:35:05 INFO OGG-00996 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: REPLICAT RMASTRK started.
2011-08-04 10:35:06 WARNING OGG-00869 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: OCI Error ORA-01407: cannot update ("INFRA"."CUST"."CODE") to NULL (status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"DP_ID" = :a3,"EXCHNG_CODE" = :a4,"ORD_QTY" = :a5,"ORD_PRICE" = :a6,"CODE" = :a7,"MKRT_CODE" = :a8,"CHANN>.
2011-08-04 10:35:06 WARNING OGG-01004 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Aborted grouped transaction on 'INFRA.CUST', Database error 1407 (ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL).
2011-08-04 10:35:06 WARNING OGG-01003 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Repositioning to rba 44132192 in seqno 68708.
2011-08-04 10:35:06 *WARNING OGG-01154 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: SQL error 1407 mapping INFRA.CUST to INFRA.CUST OCI Error ORA-01407:* *cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL (status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"DP_ID" = :a3,"EXCHNG_CODE"=:a4,"ORD_QTY"*
*= :a5,"ORD_PRICE" = :a6,"SCRP_CODE" = :a7,"MKRT_CODE" = :a8,"CHANN>.*
2011-08-04 10:35:06 WARNING OGG-01003 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Repositioning to rba 44132192 in seqno 68708.
2011-08-04 10:35:06 ERROR OGG-01296 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Error mapping from INFRA.CUST to INFRA.CUST.
2011-08-04 10:35:06 ERROR OGG-01668 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: PROCESS ABENDING.
Oracle GoldenGate Delivery for Oracle process started, group RMASTRK discard file opened: 2011-08-04 10:35:05
Current time: 2011-08-04 10:35:06
Discarded record from action ABEND on error 1407
OCI Error ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL
(status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"MKRT_CODE" = :a8,"CHANN>
Aborting transaction on ./dirdat/pm beginning at seqno 68708 rba 44132192
error at seqno 68708 rba 44132192
Problem replicating INFRA.CUST to INFRA.CUST
*Mapping problem with compressed key update record (target format)...*
ORD_QTY = 500
ORD_PRICE = 37430
SCRP_CODE =
MKRT_CODE = N
Oracle GoldenGate Delivery for Oracle process started, group RMASTRK discard file opened: 2011-08-
04 10:35:05
Current time: 2011-08-04 10:35:06
Discarded record from action ABEND on error 1407
OCI Error ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL
(status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"MKRT_CODE" = :a8,"CHANN>
Aborting transaction on ./dirdat/pm beginning at seqno 68708 rba 44132192
error at seqno 68708 rba 44132192
Problem replicating INFRA.CUST to INFRA.CUST
Mapping problem with compressed key update record (target format)...
ORD_QTY = 500
ORD_PRICE = 37430
SCRP_CODE =
MKRT_CODE = N
Any inputs / help would be appreciated.
Regards,
Manish

The SCRP_CODE column has a NOT NULL constraint. The ORA-01407 error is telling you that you cannot update or set a value for this column to null because of the constraint. This has absolutely nothing to do with an index. You can use a marker/sentinel value in lieu of using NULL. For a numeric field, where everything is positive, a negative value (-1) can be decoded as meaning null. For a character field, a code such as NA can represent NULL.
This also has nothing to do (directly) with GoldenGate failing because of this error. The underlying SQL statement will fail everywhere, regardless of the tool or application. It is not a case of failing only in GoldenGate.

Problems with recent system update

Similar Messages

Maybe you are looking for