Problems with record button on iPad rMini.

Is anyone having problems activating the Record button in the Camera Video mode. It has a mind of its own. Sometimes I can get it to work, other times it won't activate unless I click out of camera mode and then go back and try again. Of course by then, I've lost the moment I wanted to record.
Also I experience occasional problems in switching from video to camera or vice versa. Actually this usually occurs around the same time I am also experiencing problems with activating the Record button?
Anybody know of a fix besides returning the device to the Apple store for another iPad rMini? Thanks.

If its due to sensitivity issues, these self help guides might help.
http://www.youtube.com/watch?v=zNwr_mxgs9Q
http://www.youtube.com/watch?v=lSqPC1V0PPg&feature=related
By the way, alcohol based hand sanitisers work too.
Don't overapply it in one go though. You'll have to allow the alcohol to evaporate.
One final tip, after its dried, I'd recommend you to leave your iPhone's home button facing a laptop's vent just to bake it a little drier.

Similar Messages

TS3274 Problems with "home button" in IPad 2, how to fix?

It was working perfectly and suddenly stopped working... YouTube vídeos do not help...

fix for Home button
Fix a broken, unresponsive or sticky iPhone Home Button
iPad 2 home button fail: Apple Support Communities

Hello i have a problem with onfocus function on ipad. i am trying to bring my cursor on a text box on a button click. It works fine with safari web browser but not on ipad. Need a solution.

Hello i have a problem with onfocus function on ipad. I am trying to bring my cursor on a text box on a button click. It works fine with safari web browser but not on ipad. Need a solution.

I don't think that a software update from Apple will solve the issues that you are having. You have a rogue installation. After you posted I have just done the following:
Disk Utility can verify my partitioned Volume (including my boot disk) AND REPAIR the non-boot disks on the same Volume without a glitch. It repairs the non-boot disks containing data smoothly.
I have used Mail to send some mails from some Yahoo and Hotmail accounts to my Thunderbird client containing GMail accounts - absolutely normal.
I have iLife '09 but my iMovie '09 and iPhoto '09 open in a jiffy and I see no issues here. I have 6GB RAM (Maximum) on an early 2008 Macbook Pro with a 750GB hard drive partitioned with 120GB reserved for the Boot Drive.
I am sorry that I cannot help further but I am sure there must be a way to reinstall the software without having to revert to restoring your ML backup. I have two clones and if you have such I would attempt to do that through that rather than through Time Machine - that is of course if you have a cloned drive.
Good luck!

Hi - I cannot upload my emails through the mail icon. The first time I tried it only loaded very old emails, I then tried the whole process again and it has not imported a single email. I use hotmail, and have had no problems with my iPhone or iPad.

Hi - I cannot upload my emails through the mail icon. The first time I tried it only loaded very old emails, I then tried the whole process again and it has not imported a single email. I use hotmail, and have had no problems with my iPhone or iPad. So the only way I can check my emails on my mac is to go through the internet. Can anyone help?

Hello, do you mean Download?
In Mail's Window Menu, choose Connection Doctor, any red dots for status, if so what is the message?
Then click the Show Details button & Check again.

Having problems with mail on my iPad 3rd gen

Hi.
I seem to be having problems with mail on my iPad. Every few days I go to open mail and go open an email and I go to try and delete it or send a reply or compose a new mail and thus I tap the icon but mail will not do anything.
I can open emails but not send or delete them.
Sometimes it works when I just close mail and reopen it but sometimes I have to restart my iPad multiple times. Doesn't matter which email account.
Any help would be appreciated

Hello there erika274,
It sounds like no matter what contact you put into the 'To' field, a different name appears, but the email makes it to the intended recipient. I would recommend a few things here. First, close all the open apps on the device:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that restart the phone:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If the issue persists, I would next backup your device to iTunes, and restore it:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Thank you for using Apple Support Communities.
Cheers,
Sterling

Im having problems with contacts on my iPad. One of my contacts names shows up when I choose any one of 36 contacts. the email goes to the correct email address that I've chosen but the incorrect name shows up in the To: area of the email

I'm having problems with contacts on my iPad. One of my contacts names shows up when I choose any one of 36 contacts. the email goes to the correct email address that I've chosen but the incorrect name shows up in the To: area of the email. Has anyone else experienced this...if so I hope there is a fix

Hello there erika274,
It sounds like no matter what contact you put into the 'To' field, a different name appears, but the email makes it to the intended recipient. I would recommend a few things here. First, close all the open apps on the device:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that restart the phone:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If the issue persists, I would next backup your device to iTunes, and restore it:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Thank you for using Apple Support Communities.
Cheers,
Sterling

Problems with home button on iPhone 4

problems with home button on iphone 4

If its due to sensitivity issues, these self help guides might help.
http://www.youtube.com/watch?v=zNwr_mxgs9Q
http://www.youtube.com/watch?v=lSqPC1V0PPg&feature=related
By the way, alcohol based hand sanitisers work too.
Don't overapply it in one go though. You'll have to allow the alcohol to evaporate.
One final tip, after its dried, I'd recommend you to leave your iPhone's home button facing a laptop's vent just to bake it a little drier.

Problem with Pages on the iPad 2.

Hi all,
I have been having a strange problem with Pages on the iPad that I hope someone can find a solution for.
As a writer, I find that Pages on the iPad is a very good solution to my problem of needing something small and light to transport around, whilst still allowing me to do some serious writing. I use the Apple 3 battery bluetooth keyboard, and this gives me a superb working solution.
I started using the iPad 2 to do my second book and for the first 40,000 words everything was fine. But as I started going back and forth with the cursor keys, editing passages in the book, I noticed that the cursor position did not match up with the I beam cursor on screen. As it transitioned between pages it would loose it's corresponding position and the entry point for new text could be up to six characters in either direction.
Now this is not a problem if you enter a new page, as there is nothing beyond it, but in the majority of cases it is a major problem when going back over your work and editing it. I have to manually reset the start position of every new page so as to garantee the typing will go where I want it to.
Now I thought at first this was something to do with Bluetooth keyboard, but after using the onscreen keyboard and the find and replace function, I have noticed that it loses it's position in the document in a similar way. I have included a screen shot of it finding a problem I was searching for. In this case it is ", and" to be replaced with "and," or "and". Clearly in the image you can see that it is not happy and is not selecting the right things, if I replace it will replace exactly what is selected.
Has anyone else seen this problem. It seems to happen with large or small documents and I think that this is a fundamental problem with Pages on the iPad. Seeing as I can't get Apple to acknowledge this I brought it here for everyone else to check out. If we get enough voices on this, then we can make change happen.

That's right Br Abdullah, I'm finding the same problem with my itune Arabic library that I synced to iBooks version 1.5! As you say the pages are not arranged correctly.
The other problem that I'm finding is that the highlights & notes that i have made on the books on a previous version of ibooks, when synced with ibooks version 1.5, they are scattered everywhere, and sometimes in areas where there are no texts.
I left a message on the report a bug section of iBooks on the app store, and I contacted them on their feedback of apple product issues. I don't know what else we can do. It seems that no one is listening to us. I'm Dissapointed that I upgraded my iBooks version to 1.5; I was really looking forward to reading on my new iPhone 4S (on iBooks)!
What else can we do to get our concerns heared? Somebody? Anybody?

HT1222 Having a problem with iMessage on my iPad mini.

Bought my Ipad from the US & presently using it in Nigeria.I'm having a problem with iMessage on my iPad mini, I've been trying to activate it and I've been receiving an error message saying my password is incorrect which I'm pretty sure isn't because I still buy apps on the iTunes Store with it. What can I do?

Have you looked at some of the 3rd party apps that will do this for you? Some of them are iPodAgent for Windows, copypod, yamipod. Most of them can be found on versiontracker.com, if not try to "google" them. Also, if you have purchased music, you can now import that off your iPod to your new system. Hope this helps.

Hi Can anyone help. I'm having problem with FaceTime on my IPAD .It connects but cuts out Simolarly when someone calls me it connects , then cuts out ThanksBrian

Hi Having problem with FACETIME on my IPAD Connects to call but then cuts out , similarly calls in connect & cut out Can someone help. Brian

My ipad is doing the same thing to it won't let me except a incoming call on Facebook and I don't know what to do

Hi I have problem with switch on my ipad.I tried by itunes but nothing happend.What I have to do?Ipad is only 3 months old :(

hi. Could someone help me!!! I have problem with stwich on my ipad. he is only 3 months old. I tried by itunes but still dont help. is the problem number 9.please help me!!!!

My ipad is on DFU mode I conected with itunes. Itunes see my ipad. He restoring the software on ipad and then nothing happed. I see just logo apple. Could you help me what I have to do?

Is it somebody Except for me Who has problems With waching videos on ipad after the 5.0.1 update

Is it somebody Except for me Who has problems With waching videos on ipad after the 5.0.1 update

Hi,
yes I have big problems as soon as I open the video app i get a total black screen, even the upper bar with the time disappears. I already tried to:
1. closing the app and reopen it
2. restart the iPad
3. restore the iPad via iTunes
4. Begging the app to work again.

Problems with parameter button in Crystal Report Server 2008

Dear all,
I have problems with parameter button in Crystal Report Server 2008.
when I created some parameters and groups in Crystal Report 2008, they showed both parameters in 'Parameter button' and group in 'Group button' on the left, so I can choose or type without clicking 'Refresh button' But when I added it to Crystal Report Server 2008 and I click parameter button , it doesn't show any parameter. Only click refresh button to choose them. On the other hand, for 'Group Tree' is ok. When go to Default Setting-> Parameter, all parameters are in 'Unused parameter' First time I think I had problems with my installation, but when I reinstalled it again, it was like before.
Could any one help me with this?
I appreciate looking forward to your reply
Ketya

Try posting your questionin the correct forum, this is for SAP Business One, not Crystal reports Server

Problem with Information button in WAD

Dear Mates,
I have a problem with Information button in WAD template.
I have two queries in web template. those two queries are in two tabs( i used Tabstrip ) respectively.
if i press first tab it shows query1 and if i press second tab it shows query2 absolutely.
problem
when i am in first tab, if i click information it will show information about query1, but when i am in second tab,
if i click information it will show information about query1 only..
i need it to show information about second tab.
Please help. Its urgent. Full Reward points will be given.
Thanks in advance.
Regards,
Ranganath

check out this link
http://www.mhprofessional.com/downloads/products/0071640266/0071640266_chap01.pdf

A really annoying problem with a button/movie clip

I am having a problem with a button! its driving me insane
because i managed to do it last week, but that was by chance and
now i can't remember how i did it!
I can get the button (i'm using gelright from the common
libraries panel) and convert it to a movie clip(by pressing F8) and
even attach a behaviour but when i play the movie it doen't work!
when i move the curser over the button it changes into a hand, but
will not act like a button, even though i have set the behaviour to
'on release, go to and play keyframe 2'.
Please help me, for the sake of my laptop goin through the
wall!

virgosam20 wrote:
> first, i found the button i wanted in the common
libraries (gelright) and
> added it to the stage. I resized it and converted it
into a symbol as a movie
> clip. Then it got added to my library.
> Then i deleted it from the stage and replaced it with
the movie cip version i
> had just converted it to. so now i have the same object
on the stage, but now
> its a movie clip and not a button.
ok - you are running yourself around in circles - why did you
delete it to the stage only to add it
again? once you converted it to a movie clip, you had what
you wanted on the stage - but then you
deleted it and dragged another instance of the same symbol
back onto the stage - there's no reason
to do that.
> Then i double clicked on it to bring up the movie clip
timeline, but instead
> of saying 'top, down, over, hit' (or whatever it says),
it jsut said 'layer 1'
> (but this was not my original stage as i have a number
of layers on that one).
Right - this is expected because yoyu are now inside the
movie clip timeline - not the button timeline.
> When i double clicked on it again, it brought up the
right headings (top, down,
> over, etc),
Right - because by double clicking the button symbol you were
then brought to "edit mode" for the
button symbol.
but there were about 5 layers that showed the different
layers for
> the original button.
Huh? What "5 layers"? What do you mean "original" button -
per your description there has only ever
been 1 button you have been working with.
> I think i have to add the button to each of the
headings, bt there is no room,
Lost you completely now - what do you mean add the button to
each heading? I have no clue what you mean.
> as when i did it before, there was only one layer for it
and i had to insert
> the key frames myself.
Still losing you here.
> I then added a behaviour to it using the Behaviours
pannel, (selected
> movieclip, then 'go to and play....') and it appears in
the behaviours pannel.
> But when i got to Play Movie, although the curser
changes into a hand, the
> button does not work.
That's because you are applying a behavior for a button to a
movie clip instead.
I think you went wrong when you converted the button to a
movie clip - i have no idea why you did
that or why to think your button needs to be in a movie clip.
>
> Hope that can help you with what i've done and you can
tell me where i've gone
> wrong.
>
I just think you don't understand how timelines, symbols or
buttons work yet in flash.
1. drag a button to the stage.
2. select it and open the Behaviors panel (dont double click
it to edit it).
3. add your actions.
4. test movie.
(no need for a movie clip here.
-chris

Problems with record button on iPad rMini.

Similar Messages

Maybe you are looking for