Problems with register a program (Adobe Acrobat Pro)

I have Acrobat 8 and want to register it so I can use it beyond the 30 days trial period. The reason is that my computer went down yesterday so I had to format everything and reinstall everything once again.Acrobat Installation & Update Issues@

I assume you are trying to register it on the same OS you used before. You should only have to install it and enter the S/N to activate the program. You did not indicate if you had a problem or what the issue is you are having. Is the registration being rejected or what? Is there an error? If so, what is the exact wording of the error and what where you trying to do at the time of the error?

Similar Messages

Problem with pdf-printing in Adobe Acrobat Pro

Hi,
I have Adobe Acrobat Pro 9.4.3.
PDF-printing has always worked great but suddenly there is some kind of problem.
After printing a excel-document from "Print to pdf" built-in function in MacOS OR Adobes Printer I have corruptet pdf-files when showing them in Adobe Reader/Acrobat, but the MacOS Preview-software shows them correct.
So, there cannot be any problem with the printing, but the local preview on my computer using Reader or Acrobat. I dont even use the Myriad font in the document, I use Verdana.

You say you're using Verdana but you're not. The error message clearly shows you're using MyriadPro Bold.
You probably recently installed the Mac OS X 10.6.7 update which has a bug with OpenType PostScript fonts like MyriadPro Bold. Either use Verdana or another TrueType or PostScript font, or revert to Mac OS X 10.6.6.
Read about the problem here: http://www.tidbits.com/article/12078

Problems with our copy of Adobe Acrobat 7 Professional.

We have two problems with our copy of Adobe Acrobat proffesional which we have recently re installed back on the same PC following so we thought the relevant transfer activation instructions.
The first is that when we first start the program with no file loaded Both Transfer Activation and Activate Acrobat are greyout out. This in tiself is not a problem but it may have a bearing on our real problem.
We have for a few years used Acrobat Proffesional successfully to sign released drawing files which have been 'printed' to a PDF file by a third party printer driver. Recently though when we try to load any of this type of file the Acrobat menu stays greyed out and both Adobe Acrobat and the PDF file are listed in Windows task manager. Acrobat is completely locked up and has to be exited via task manager. If I load PDF files from other sources the abot symptoms accur only briefly then the program menus re activate and the PDF file disappears from task manager. It is as thought our PDF drawing files are failing to complete loading.
Does anyone know how I can find out if our copy of Adobe Acrobat Pro 7.0 is actually activated?
Does anyone know what might have started to prevent out drawing files from loading.
Thanks
Chris

Good point but this one does require activation.
Our real issue is that if we load one of our own drawing filkes, even one previously edited or signed with no problems it now completely locks up Adobe acrobat and we cannot do anything at all in Acrobat.

Problem with the product activation adobe acrobat 9 standard.

I have a problem with the product activation adobe acrobat 9 standard.
It is a failed hard disk to the pc and was not able to deactivate the license adobe.
Now I replaced the hard drive and reinstalled the software but it tells me that all licenses are used.
Is it possible to unlock the licenses in use?
Thank you.

Adobe can unlock licenses, this is a normal thing for them to do. You must contact them directly, there is no trick or other way.

I cannot convert a pdf to work with my newly purchased adobe acrobat pro XI

i cannot convert a pdf to work with my newly purchased adobe acrobat pro XI

Sorry I cannot convert pdf to Word document (typo)
Richard Gabai
Please note my new email address: [email protected]<mailto:[email protected]>
UnionPay International
208 Plaza 10, Harborside Financial Center, Jersey City, NJ 07311
Office (201) 577 5479 / Cell (917) 860 2642 / Fax (201) 577 5480 / UnionPayInt’l.com<http://140.207.194.112/column/en/en_ylsy/index.shtml>
cid:[email protected]
This e-mail contains information that may be confidential and/or proprietary. It is intended solely for the addressee. Access to this e-mail by anyone else is unauthorized. If you are not the intended recipient of this transmission, any disclosure, copying, use, or distribution of the information included in this e-mail and any attachments is prohibited. If you have received this transmission in error, please notify us by reply e-mail and permanently delete all. Thank you.

Issues with forms created in Adobe Acrobat Pro XI

Hey Gang,
I need your help to figure out why my interactive form text fields that were created in Acrobat turn black when clicked and don't display text when typed into. The text that is being typed is there, but it is not visible until you select the next text field. Also the solid black bar goes away as well when you select a new text field on the form. By the way it might be important to note that my interactive PDF started as a SWF file before being exported as a PDF. Either way the form fields were created in Acrobat Pro XI. Thanks for any help.

The font is set to Helvetica 12pt. I have been messing around with the form and have noticed that if I click edit form and then click done editing. The form will function properly until I click anywhere other than a text field.

Problem with video playback in adobe premiere pro CS4

Whevener i am to put something into my video. Via it be either A fraps recorded video or a video shot by my camera... i put it in the library and drag it to the stage. then when i play it in Premiere the video just stays as a still picture but the audio plays. It does this with 2 methods i tried (Fraps and my Photosmart M537 Camera). I asked My uncle (who had the same problems with CS3) and he said that hes pretty sure theres something wrong with the Codec. I think thats it because when i put in my video that i had recorded with Hypercam 2. it worked fine. Could anybody please help me?

1 - search the forum for fraps - many problems, few successes
2 - what CODEC is used for your Photosmart M537 Camera?
If that is a STILL camera which has a video mode, you most likely need to convert to DV AVI type 2 with 16bit 48khz sound
A link with many ideas about computer setup http://forums.adobe.com/thread/436215?tstart=0
Many of the ideas at the next link are generic enough they have helped some Non-Premiere users fix problems
Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with the DETAILS asked for in the questions at the end of the troubleshooting link

Problems with producing PDFs via Adobe Acrobat Prof 11

Hello we have the following problem:
While producing several word documents via PDF Printer (we have insallted the latest version of Adobe Acrobat Professional 11) we receive error messages like
%%[ ProductName: Distiller ]%%
%%[ Error: /EMC pdfmark without matching BMC/BDC.]%%
%%[Page: 1]%%
%%[Page: 2]%%
%%[Page: 3]%%
%%[Page: 4]%%
%%[ Error: limitcheck; OffendingCommand: pdfmark ]%%
Stack:
-mark-
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
%%[ Warning: PostScript error. No PDF file produced. ] %%
Using the Word 2010 Add inn (producing PDF), it works.
What is the problem?
Thanks for ur help.
S.H-Schuett

Hi,
I'm having a similar problem and it's disappointing that no one has responded to the original posing from April 2013.
I was extracting a range of pages from Framemaker 7 to PDF using the Acrobat 6 Distiller. The PS file failed to convert to PDF and the log file contained these errors. What is the meaning of the "Error: undefined" statement? How can I figure out where the error is occurring?
Yours,
Michael F
=====================================================================
%%[ ProductName: Distiller ]%%
%%[ Warning: Helvetica not found, using Font Substitution. Font cannot be embedded.]%%
%%[ Warning: Helvetica-Bold not found, using Font Substitution. Font cannot be embedded.]%%
%%[ Warning: Times-BoldItalic not found, using Font Substitution. Font cannot be embedded.]%%
%%[ Warning: Times-Roman not found, using Font Substitution. Font cannot be embedded.]%%
%%[ Error: undefined; OffendingCommand: pdfmark ]%%
Stack:
/StRetrieve
/P82708
/StoreName
-dict-
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
%%[ Warning: PostScript error. No PDF file produced. ] %%

I am having problems with the installation of Adobe Acrobat. I received an Error 103 the setup file can not be located. Can someone help

I am trying to install Adobe Acrobat after I purchased the monthly membership. I did receive help but the after the installation is complete I receive error 103 which states that the setup file can not be located.

Hi uniquenader,
Did you encounter any errors during installation? Which OS are you using?
Did you have any previous versions of Acrobat / Reader installed?
Please use the Acrobat Cleaner tool ( Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs ) to remove the software completely,
Re-download, reinstall and check.
Regards,
Rave

Registered Symbol in Adobe Acrobat Pro Extended 9

Is there any reason why the registered symbol appears in the Title field and not the Keywords field in the Document Properties dialog? I see the (r) symbol fine in the Title field, but see a question mark in the Keywords field. I work with FrameMaker 9 (as part of the TechCom Suite 2), and have set my File Info in FM itself, and included the registered symbol when writing my application name in the Title and Keywords fields. I'm on Windows XP Pro, SP 3, 32-bit, 2 GB RAM.
If the symbol didn't appear at all, I'd think it's a missing font, or some such problem, but this inconsistent display is puzzling. I've tried reinserting the symbol in Frame, using the key codes, but didn't help matters. Would appreciate any help.

I forgot to say that I converted my source FM file to PDF using the High Quality Print job options in Acrobat Distiller 9. Thanks.

Font problem when downsizing file in Adobe Acrobat pro 9

We currently use Quark on our pcs and sometimes when we need to downsize the hi res print ready
pdf to low res. We do this in acrobat but what tends to happen is that the fonts either shift or
go across the page. Can anyone help with this? there are two of us running 9 while the rest of the crew are operating 4,
although I do not think that this is the problem. Can external ads cause a problem?
thanks
Nita

External ads?
Open the original external ads and check for font embedding. If the fonts are not embedded (or subset), than Acrobat has no font data for the spacing and such.
I have to ask however...when you create a "hi res print ready" pdf from Quark...with a placed pdf without fonts embedded (or subset) does Quark not realize or warn you that the fonts are not available?!?

Updated MacBook Pro with Yosemite and to Adobe Acrobat Pro 10.1.12, won't "share" or attach annotated PDF file

Anyone have a fix for this?

Count me in, I have the same issue, and from what I read here, it looks like a Yosemite/SSD related issue ?
I'm not 100% sure if it started when I put a SSD in my old iMac 2009 (as a fusion drive) or if that's after that when I upgraded to Yosemite...
I did disable auto poweroff like suggested in another thread : Mac freeze during the night sleep.
sudo pmset -a autopoweroff 0
We'll see if it helps.
It happens toughly a couple of times a week.

I cannot re-install Adobe Acrobat Pro XI

I have faced a problem and then uninstalled the Adobe Acrobat Pro XI. Then I tried to re-install it but the Adobe Download Manager always showing the program is 'up to date', there's no 'Install' button as before, so I didn't know how to re-install it. I am a member of Creative Cloud and I have not the original software in my computer. I pay monthly fee. How to solve the problem?

I am having the same issue.I can't get these solutions to work. (I didn't even know what a "caps" folder was so I didn't attempt that.) Did anything work for you?
Suddenly Acrobat Pro declared itself a "trial version." I saw there were two Acrobat shortcuts on my (Windows) start menu. I deleted Acrobat entirely and tried to reinstall. I believe I was "within the CCloud" as I started at creative.adobe.com. Then went to Acrobat, clicked download. It took me to the list of apps on my computer. It proudly said "up-to-date." However, it no longer exists on my machine. ##$2?? ( don't even have Acrobat Reader loaded.)
The sign in screen takes 5 minutes to sign-in. The support option I thought might help said it was down. This is creative alright, but not in a good way.
Have you rebooted? I haven't tried that yet. Does Adobe even have phone support? The website is so determined to sell me stuff, it is hard to actually find that kind of information. I would think if it were available for a fee, I'd have been redirected there by now.

Adobe Acrobat Pro 9 Preflight Display Message

I am opening a "PDF File with Digital Signature" using Adobe Acrobat Pro 9.
File gets opened.
Then i choose "Preflight: option for "Report PDF Syntax issues".
The following message is displayed:
"An error occured while parsing a contents stream. Unable to analyze the PDF file."
So whats the solution for this error?

Open Acrobat Pro > Open the PDF > Select Advanced > Preflight.
Acrobat Pro Help provides details about Preflight.
http://help.adobe.com/en_US/acrobat/pro/using/WS58a04a822e3e50102bd615109794195ff-7b82.w.h tml
Be well...

I purchased CS6 and had problems with the Adobe Acrobat Pro so i uninstalled and now need to reinstall but serial number wont work. How can i reinstall ONLY Adobe Acrobat Pro since its included in CS6?

I purchased Design Standard CS6 the entire package. I downloaded and installed but I was continually having problems with Adobe Acrobat Pro. I tried updating to the newest version but it only made the problems worse (acrobat was super slow and constantly not responding). So i decided to try to uninstall and then reinstall the program. Well I uninstalled, and then attempted to reinstall ONLY the adobe acrobat pro but it says my serial number (which is for design standard) will not work. Since Acrobat Pro is included in the suite, i thought this wouldnt be a problem. Is there anyway to get around this without uninstalling the entire design standard and reinstalling everything? I only need to reinstall acrobat pro.

You need to reinstall Acrobat the the Creative Suite, you cannot download it is a separate application and install it that way because it will be looking for a serial number relative to being a singly purchased application.

Problems with register a program (Adobe Acrobat Pro)

Similar Messages

Maybe you are looking for