Problems with regular Texting since iOS 7.0.3

Hello, I have an iPhone 5s recently upgraded to iOS 7.0.3 via OTA update. I never use iMessage, I have an unlimited text plan, so I always have used SMS with everyone. However, after this last update, I have problems with regular SMS. I can send SMS to everyone as usual, but can only get text messages from some-all of them using iPhone 5 with at least the lastest iOS6 version. I have noticed then only way to text them now is to turn on iMessage, otherwise I keep missing their replies. These are people, that until the last upgrade, I was texting with on a regular basis with no problems using plain SMS with iMessage option OFF. Contrary to most, I don't want to use iMessage but rather use regular carrier provided SMS.
For instance, both my son and daughter use an iPhone 5 with iOS 7 (but not the latest patch 7.0.3) installed, I can text with my son OK, but can't get any texts from my daughter, can only communicate with her using iMessage-BTW, we are all on the same network on a family plan. Can't understand this at all. Since I can SMS with some, but not others I don't think this is a problem with my carrier but rather a problem with my phone since the update to 7.0.3, and they say I am the only one they have problem with texting with and I am the only one on the new software version.
Anyone else has noticed this issue.

I wonder if this may have something to do with iMessage on my Macs. Recently updated to Maverirks and the iMessage app on my Macs was set up to my email and mobile phone (it wasn't before). I wonder if this is so, then whoever I send an SMS to that has iMessage on and replies back, will be picked up by iMessage since is turned on on my Mac, since replies go to the Mac but not my phone. If the sender has iMessage off, I get the SMS fine.

Similar Messages

Problem with outgoing texts on iOS 4.3.5?

Since updating to iOS 4.3.5, friends overseas are unable to see my text replies. Incoming texts are OK, and I can place a voicecall to them fine, but they do not recieve any texts that are sent out. Anybody else experience this? What would be causing this?

No, since it was working fine up until the 4.3.5 update....but, it might not be a bad idea. I thought it was just a problem if I was located internationally...ie. data roaming/texting.
Why would the carrier allow me to be able to make voice calls ($$), not texts to the same #? I will call them...

HI pls i am having problem with my iphone4s since i updated to 8.2 i can't check balance of my account and secondly if somebody call me it is indicating no with out name pls what is the solution

HI pls i am having problem with my iphone4s since i updated to 8.2 i can't check balance of my account and secondly if somebody call me it is indicating number with out name pls what is the solution

When you have kernel panics, the pertinent information is in the panic report.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway.

Am I the only one having problems with ringer volume since the update?

Am I the only one having problems with ringer volume since the update?? I'm hard of hearing and before updating to IOS7 I could hear my alarm and ringer just fine. Volume is turned up all the way and I've chosen the loudest sounds I could and still having a difficult time hearing.

Annie Hall is available on DVD only.
It is not available for streaming and I believe movies available for streaming are the only movies available with the Netflix app on an iOS device.

Problems with importing text messages from PC Suit...

Problems with importing text messages from PC Suit 7.1.18.0 to my Nokia 5800
I am trying to import a csv file that contains text messages (Note that this file was created using PC Suit 7.1.18.0) to a subfolder that I have created to My Folders but PC Suits only imports the text messages to the Draft folder. Note that initially it shows that the messages are import in the correct folder but after a refresh it shows them in the Draft Folder. Is their any setting that I should change in the PC Suit or the phone? My computer runs on Windows XP Service Pack 3 and the Nokia 5800 was upgraded to the latest firmware v20.0.012
Thanks for your help

Most phones only allows importing of draft and archived box for SMS.
To do a restoring, you need to backup the SMS as a .nbu file using PC Suite and restore later.
If you got an SD card, you can also do a backup on the SD Card (backup.arc) then restore later (reset and restore: backup.arc and mmc).
What's the law of the jungle?

HT1998 I have what I believe, though I am not certain, an Airport Extreme 1st generation. My internet speeds on my hardwired pc are running in half and a bit higher on my Mac Pro. Cable claims it is a problem with the router since I can bring the PC speed

Bear with me please as I have never used the community before. I have an Airport Extreme 1st generation at least I think it is a 1st generation. My PC is hardwired and my Mac Pro, obviously wireless. I have 50/8 mbps service but the speeds on my PC run around 20/8 and 30/8 on the Mac. Cable says it is a problem with the airport since my PC speeds rise to 50 when the airport is disconnected. Does anyone know what to do?

The simplest way would be to perform a "soft" reset on the AEBS. This type of reset will temporarily disable all of the AEBS's passwords up to five minutes. This should give you ample time to access the AEBS with the AirPort Utility to change it.
If you don't want to actually change the password, then you can possibly retrieve the password from the OS X Keychain, as follows:
Run the Keychain Access utility found in \Applications\Utilities
In the category column (on the left side of the utilities' window), select "All Items."
In the right column look for your Network Name. It will have a "Kind" of "AirPort network password."
Double-click on your network name listing.
Click on "Show password."
Enter your Mac's administrator's password
Your wireless network's password should now be displayed.

A problem with copying text from english pdf to a word file

i have a problem with copying text from english pdf to a word file. the english text of pdf turns to be unknown signs when i copy them to word file .
i illustrated what i mean in the picture i attached . note that i have adobe acrobat reader 9 . so please help cause i need to copy text to translate it .

Is this an e-book? Does it allow for copying? It is possible that the pdf file is a scan of a book?

Problem with selecting text in Adobe Reader XI

Hi all, I am encountering a problem with Adobe Reader XI and it is very strange I could not find an alike issue on the internet so I guess I have to submit a question with it.
So here it is, I am using Adobe Reader XI Version 11.0.2, operating system: Windows 7. I do not know it starts from when but it has the problem with selecting text - to be copied in pdf documents. I ensure that the documents are not scanned documents but word-based documents (or whatever you call it, sorry I cannot think of a proper name for it).
Normally, you will select the text/paragraph you want to copy and the text/paragraph will be highlighted, but the problem in this case that I cannot select the text/paragraph, the blinking pointer (| <-- blinking pointer) will just stays at the same location so I cannot select/highlight anything to be copied. It happens oftenly, not all the time but 90%.
This is very annoying as my work involves very much with copying text from pdf documents, I have to close the pdf file and then open it again so I can select the text but then after the first copying or second (if I am lucky), the problem happens again. For a few text I have to type it myself, for a paragraph I have to close all opening pdf documents and open again so I could select the paragraph to copy. I ran out of my patience for this, it causes trouble and extra time for me just to copying those texts from pdf documents. Does this problem happen to anyone and do you have a solution for this? I would much appreciate if you could help me out, thank you!

Yeah, I totally agree, this is very strange. I have always been using Adobe Reader but this problem only occurred ~three months ago. It must be that some software newly installed I think. But I have no idea.
About your additional question, after selecting the texts and Ctrl + C, the texts are copied and nothing strange happens. It's just that right after I managed to copy the texts, it takes me a while to be able to select the texts again. For your information, I just tested to select the texts and then pressed Ctrl, the problem happened. And then I tried pressing C and then others letters, it all led to the problem.
I guess I have to stick with left-clicked + Copy until I/someone figure the source of this problem. Thanks a lot for your help!

Problem with append += text in Text Field

Hi guys
i have a problem with append text.
I have one array which contain some city names, like CityArea=["NAME 1", "NAME2" ...etc];
Then i have one String and one Text Field.
Using for loop im getting right results. But when im running script again then im getting same text again.
F.ex.
First time:
City name: Name 1
City name: Name 2
Second time:
City name: Name 1
City name: Name 2
City name: Name 1
City name: Name 2
I have tried to make TextField to and String to Null and delete it, but it's appearing again.. :/
How to avoid this?
Here is script:
for (var i1:int = 0; i1 < CityArea.length; i1++)
_CityAreaString1 += " "+CityArea[i1]+"";
_CityAreaString1 += " ";
_CityAreaTF1 = new TextField();
_CityAreaTF1.border = true;
_CityAreaTF1.wordWrap = true;
_CityAreaTF1.multiline = true;
_CityAreaTF1.selectable = false;
_CityAreaTF1.antiAliasType = AntiAliasType.ADVANCED;
_CityAreaTF1.name = "CityAreaTF1";
_CityAreaTF1.embedFonts = true;
_CityAreaTF1.htmlText = _CityAreaString1.toUpperCase();

I think i found why.
There was no problem with TextField.
There was a problem with Array. "CityArea"
So each time I executed script it added new string in Array. And that is because i got like:
TextField
City 1
City 2
City 1
City 2
Running this script is Ok:
for (var i1:int = 0; i1 < CityArea.length; i1++)
_CityAreaString1 += " "+CityArea[i1]+"";
_CityAreaString1 += " ";
But outside of this for loop there is another for loop for adding Cities in CityArray.
I fixed it by adding empty array at the start of function
function myFunc():void
CityArea = [ ]; // Empty array fixed this issue
// LOOP FOR ADDING SHOPS IN CITY AREA
for (var j:int = 0; j < _Shops; j++)
CityArea.push(_Shop);
// FOR LOOP TO ADDING SHOPS IN STRING
for (var i1:int = 0; i1 < CityArea.length; i1++)
_CityAreaString1 += " "+CityArea[i1]+"";
_CityAreaString1 += " ";
Thank you for your help kglad

I'm having problems with my internet since I have upgraded. I am afraid to upgrade on my Macbook pro now. I don't want the upgrade to slow down my laptops. Any suggestions?

I'm having problems with my internet since I have upgraded. I am afraid to upgrade on my Macbook pro now. I don't want the upgrade to slow down my laptops. Any suggestions?

Wifi issues are one of the common issues being reported by users. There is not much you can do at this point but wait and hope that th 10.8.1 update will address these issues.

CS3 - Problem with dynamic text -

Hello,
I have a problems with my text, when i write a few ligne inside a dynamic text box, if i selec the text and by the way drag it down the first line goes up and disapear. Is there any way to solve this?

This is the Flash Player forum; please post your question in the appropriate product forum.

HT6030 I have many problems with my mail since I moved to mavericks. The filter is very sensitive, read mail appears as unread, I can't drag mail to the folders and more. I can't update the mail program as directed on this page, update says my system is u

I have many problems with my mail since I moved to mavericks. The filter is very sensitive, read mail appears as unread, I can't drag mail to the folders and more. I can't update the mail program as directed on this page, update says my system is updated

I don't think that a software update from Apple will solve the issues that you are having. You have a rogue installation. After you posted I have just done the following:
Disk Utility can verify my partitioned Volume (including my boot disk) AND REPAIR the non-boot disks on the same Volume without a glitch. It repairs the non-boot disks containing data smoothly.
I have used Mail to send some mails from some Yahoo and Hotmail accounts to my Thunderbird client containing GMail accounts - absolutely normal.
I have iLife '09 but my iMovie '09 and iPhoto '09 open in a jiffy and I see no issues here. I have 6GB RAM (Maximum) on an early 2008 Macbook Pro with a 750GB hard drive partitioned with 120GB reserved for the Boot Drive.
I am sorry that I cannot help further but I am sure there must be a way to reinstall the software without having to revert to restoring your ML backup. I have two clones and if you have such I would attempt to do that through that rather than through Time Machine - that is of course if you have a cloned drive.
Good luck!

HT4623 updated to ios7 on Sunday - I am having major problems with my phone since - keeps freezing - updated itunes first then backed up my phone to my laptop. Is it worth it at this stage doing a restore?

I updated my iphone 5 to ios7 on Sunday and have been having m?ajor problems with my phone since. It keeps freezing and I have to constantly press the home and on/off switch to get it to restart. I had updated my itunes and backed up the phone before doing the update. I'm getting very frustrated at this stage as the phone is practically useless. Is it worth doing a restore? Bearing in mind that I just tried to do that and got a message to turn off the 'find phone' feature in settings and when I tried to get into settings the phone froze again.

I don't have a good answer for you but reading these forums, it seems that network drives can often cause problems with iTunes like you describe.
Patrick

HT1391 How can I get a full history of our purchases? We had some problems with some downloads since 5/25/12.We were charged for items that said "Free"? Help

How can I get a full history of our purchases? We had some problems with some downloads since 5/25/12.We were charged for items that said "Free"? Help

iTunes Store menu > View My Account...
Sign in and select "See All" in Purchase History.
You can only see them in "batches" of ten. As far as I know there is no way to obtain a comprehensive summary.
The prices are tabulated in that list. If they were supposed to be free, and they show that you were charged, then click the arrow next to the suspect purchases and click "report a problem".

Hye guys i've a problems with my iPhone : since few days i can't open my application 'apple store ' .. It's very strange ! So have you solutions ?

Hye guys
I've problems with my iPhone , since few days i can't open my application Apple store .. It's very strange because it's the first time ! And everything is okay in my phone .. If you have solutions tell me !

Hello again,
I just realized that it was the Address book I was looking for, and it's there. I'm sorry --and embarrased- for the confusion!
I can't delete the discussion, so please considered resolved!
Thanks!

Problems with regular Texting since iOS 7.0.3

Similar Messages

Maybe you are looking for