Problems with repairing permission
What does this mean?
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
I haven't modified this file.
Safe to ignore...mostly everyone sees the same.
Apple has this to say about that:
http://support.apple.com/kb/TS1448
Similar Messages
-
Problem with repaired neo fis2r
I am experiencing performance problems with my neo tha t I am not sure where to begin trouble shooting. I had an video card falure(delaminated pin on agp ) which resulted in damage to the agp slot I rma 'd my neo and it returned marked repaired with a grey agp slot , bios 1.4 ( had 1.6 installed) and the same serial #. I reinstalled all components. noted the retrograde bios and flashed to 1.8. then I attempted to return all settings to theyre original state only to find that I can't overclock! previously I got 250mhz clock with perf mode set to ultra turbo and ram set to 333mhz . now I can't get past perf mode fast and 205mhz no matter what. I see references to bios 1.8 as being not very overclockable.this may be the problem but the waters have been muddied by the multitude of events. I am not an expert and do not know where to start. I was so thrilled with the performance of my neo and now I am at a loss . Is the bios responsible for this abysmal performance or is my system still compromised? I don't know what to do to determine its state. my system is as follows:-
neo fis2r( of course)
2.4c p4 with zalman alcu 7000
ati 8500dv
512mb samsung 400mhz ram
seagate barracuda sata 150 raid 0
pci modem card
thermaltake xaser2 case
any suggestions would be greatly appreciated
kevessentially I am not just concerned about it's current inability to overclock. but more in the fact that b4 the repiar of the board I was able to overclock with no difficulty and no special considerations. in fact when I look at my little log of bios settings the agp clock was set at 66.6/33.3 after all the overclocking. and now with EXACTLY the same components( ati card repalced but physically identical) none of those same settings work. did the failure damage other components whose failure is not yet critical path or has the bios upgrade caused instability?
-
Hi just wondering has anyone had this problem with Lenovo I bought an idea centre 750 in November 2014 and it wasn't shuting down properly the fan would still run so I rang up and told them there was a hardware problem they were very nice on the phone apologised and said it would have to be sent off for repair .... Far enought I agreed !! These things happen ok so then I received my computer back 4 weeks later and all they did was reinstall windows .... A waste of my time a monkey could do that !! The problem was still there so I returned it after I got no where with costumer support saying that it should have been fixed !! So sent it back again took another 4 weeks and recieved it yesterday went to open the box and all the glass from the screen was smashed to pieces the sides of the boxes it was packed in had no protection !! How stupid can you be !! Now I'm waiting to ring them again on Monday and demand a replace or my money back spent a lot of money on this and feel I have been robed !! Anyone any advice ?
Just a quick update rang Lenovo and once again they have done nothing they want to send my computer away again for another 4 week for there own lack off packaging any other company would have replace it by now best advice to anyone buy off dell cause Lenovo ain't worth **bleep** !! Customer service is a big deal too bad I was late finding that out they will do only the bare minimum for you I bought this computer in November 2014 might actually get it mid April to use .......... Complete joke !! Looking into small claims court over this
-
Problem with repair error 1311, and trouble reinstalling.
I am having problems with reader, so I tried to do a repair but got error 1311. I uninstalled not im having trouble reinstalling...
Error 1311, 1335, or 2350 "Source file not found...data1.cab" |Install Adobe products | Windows
-
A week ago my MacBook Pro was running slow, so I turned it off. When I tried to turn it back on it wouldn't. I took my mac to the local Geek Squad and he told me to boot it up holding option (same as holding command+R). When I do this I click on Repair Lion or something like that, I get to the step where I need to select a drive, and Macintosh HD and Revover HD are both locked. Anything I can do? I do not have a back up disk, and I never backed it up with Time Machine. I don't want to lose all of my files.
Thanks.It is weird that the disks are locked, I dont know how to fix that. If you decide to get a new hard drive, I recommend looking in to OCZ Solid State Drives (SSD). OCZ is a very very reputable company, long warranties, and they are less expensive now then when I bought mine. Opposed to a traditional spinning disk, they are more like ram. The read and write speeds of a SSD is about 3 to four times faster than a brand new disk hard drive. I love mine, it makes my computer fast. Apps and documents open seconds after you click them, my boot up time is about 25 Seconds, and local data transfer is fast. When I installed Mountain lion, it estimated 35 minutes and it is usually longer but it took 10 mins with the SSD. Whoever you have replace the drive usually have drive docking bays to transfer you data, or you can have them put the old drive in an external exlosure. If you do it yourself, you could buy an external enclosure and if you are computer savy, navigate the files of the drive and find your things, if geek squad cant get the data off the old drive it would likely be your dive took a crap and that was your original problem.
Good Luck.
MacBook Pro 13" 2.3 GHz dual i5, OCZ 120GB SSD -
Problems with Custom Permission
Hi ,
I have posted this java.lang.security, but thought that someone
here might have encountered the same problem and could help me.
Im planning to have a setup,
where only certain principals have access to execute
PriviligedActions thru Subject.doAs(..) after JAAS authentication.
Have included a new permission "MyMethodPermission",but it does
not seem to be including this permission with the subject in sampleAction !
Below is the code and the policy file.
All the code is the package 'samples' ..
MyMethodPermission.java
package samples;
public class MyMethodPermission extends BasicPermission{
public MyMethodPermission() { super("MyMethodPermission");}
public boolean implies(Permission perm) {
return (perm instanceof MyMethodPermission); }
sample_java2.policy
/** Java 2 Access Control Policy for the JAAS Sample Application **/
grant codebase "file:/C:/jaas/jaas1_0/doc/samples/sample.jar" {
permission java.security.AllPermission;
permission samples.MyMethodPermission ; }
sample_jaas.policy
/** Subject-Based Access Control Policy for the JAAS Sample Application **/
grant Principal samples.SamplePrincipal "testUser" {
permission samples.MyMethodPermission ;
Sample.java
main()
{... // lcontext has the principal "testUser"
Subject.doAs(lcontext.getSubject(), new SampleAction());
SampleAction.java
public Object run() {
java.security.AccessController.checkPermission(new MyMethodPermission())
On execution , I get
Exception in thread "main" java.security.AccessControlException: access denied
samples.MyMethodPermission MyMethodPermission)
at java.security.AccessControlContext.checkPermission(AccessControlCon
xt.java:272)
at java.security.AccessController.checkPermission(AccessController.jav
399)
at samples.SampleAction.run(SampleAction.java:38)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAs(Subject.java:378)
at samples.Sample.main(Sample.java:105)
Could you kindly advise as what the problem is ??
Thanks
HarishFixed !!!!
All I had to do was
to include the linepermission samples.MyMethodPermission "MyMethodPermission"
in the sample_jaas.policy
- Harish -
Problem with User Permission in BI Publisher.
I have successfully managed to integrate BI Publisher with Discverer , but am facing a problem when i log in with the credentials of the SSO user biptest. The user does not have the rights to create a report.I dont understand why.I have followed all the steps mentioned in the Jorge Anicama Document on integration. Does anyone have any idea as to what the problem is. Any solution will be highly appreciated.
Thanks.check for the SECURITY_MODEL in the file xmlp-server-config.xml under Configuration Folder (Repository). I will have to check the exact term but I think its value should be LDAP. I think the SSO is working fine, just that its not able to connect to LDAP. Check if there is any error in the console / log file. I have not checked each step of the document that you referred to, but please verify the steps for LDAP integration from the user guide.
-
Problems with repairing external HD for use with TM
I've been trying all day to fix this. It was working earlier no problem, then when I went to restart my computer(after reinstalling mac osx) due to updates, i've been having trouble ever since. It doesn't mount, but yet it shows up in the disk utility. I've tried to repair it, and I get this:
2008-11-30 20:41:26 -0500: Verify and Repair volume “Time Machine Backups”
Starting repair tool: 2008-11-30 20:41:26 -0500
2008-11-30 20:41:26 -0500: Checking Journaled HFS Plus volume.
2008-11-30 20:41:26 -0500: Detected a case-sensitive catalog.
2008-11-30 20:41:26 -0500: Checking Extents Overflow file.
2008-11-30 20:41:26 -0500: Checking Catalog file.
2008-11-30 20:42:36 -0500: Checking multi-linked files.
2008-11-30 20:42:41 -0500: Checking Catalog hierarchy.
2008-11-30 20:46:04 -0500: Checking Extended Attributes file.
2008-11-30 20:46:10 -0500: Invalid record count
2008-11-30 20:46:10 -0500: Volume check failed.
2008-11-30 20:46:10 -0500: Error: Filesystem verify or repair failed.2008-11-30 20:46:10 -0500:
2008-11-30 20:46:10 -0500: Disk Utility stopped repairing “Time Machine Backups” because the following error was encountered:
Filesystem verify or repair failed.
2008-11-30 20:46:10 -0500:
Any suggestions or ways to fix this? All my files are on this HD...One of the things you listed is a case-sensitive filesystem which can be troublesome.
Run DU and look at your internal HD.
Click on the partition and down below you will see Format: Mac OS Extended (Journaled)
I believe that it will also say "Case Sensitive" if it is. -
RSRV issue (problem with repairing Infocube)
Hi Experts,
I have an issue with RSRV or repairing my InfoCube object. Everytime I analyze my cube (using RSRV), it returns warning message saying "Dimension ZCGILFCST3: DIMID 106 is not posted". Hence, when I do the repair or executing the Correct error function, it gives me a message of "Error during repair; repair probably not successful".
What do i need to do with this issue? What exactly the "not posted" issue means?
Please help me.
Thanks a lot,
spinheadHi ,
Thanks for the info.
However, the Correct Error function could not remove the unused data (DIMID 106). As background, we do before deletion of unnecessary data in the cube before we do the RSRV (analysis and repair). Now, as mentioned, when we analyze the cube it returns error message and the repair function could not correct or remove the identified erroneous data.
Actually, it is not only DIMID 106 data which the system says as erroneous record instead it returns a lot (DIMID: 104, 107, 108, 355 and so on). Meaning, no definite number of erroneous data yet. We already checked those data in the cube (directly in dimension table) and found out that all of it are needed data and must not be deleted.
I hope someone could give me exactly what the "not posted in the InfoCube" means and help me out with this issue.
Kindly help experts
Thanks a lot -
Help with repair permission!
After I repair permissions I get the following message:
Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
What's the cause of it? How do I fix it?Locum elevates Finder's privileges, such as when emptying the trash when there are trash files
present that the user does not own.
The SUID (sticky bit) message is a bit misleading. The ISVTX (the sticky bit) has no effect on
executable files. All optimization on whether text images remain resident in memory is handled
by the kernel's virtual memory system. So even if the SUID bit was set, it would not matter.
What the SUID error actually means is this:
The checksum on record in /var/db/receipts, does not match the actual file checksum. The
reason is simple:
The file has been replaced by a newer one, and that is why the old checksum on file is obsolete.
The receipt file did not get updated during the update installation. Such is not uncommon. -
Problems with Repair Disk Permissions
I am running Mavericks 10.9.5 on a new (2013) Mac Pro. When I run disk permissions I get a LONG list of repaired files and then the message that the process is complete. But if I then run the repair routine again I get ANOTHER equally long list of DIFFERENT permissions that are supposedly being repaired. This goes on ad infinitum. If I run Repair Disk Permissions on my other computers multiple times no additional permissions show up after running the program once. Any idea why this might be occurring?
You can safely ignore those messages.
http://support.apple.com/en-us/HT203172
Best. -
Repair Permission still problematic
I still get the following when trying as Disk Repair Permission:
Repairing permission for "Macintosh HD"
Error: The underlying task reported failure on exit.
Permission repair complete.
Anyone else experience same?
Otherwise upgrade to Leopard on this machine seems to be working ... weird.
ApBYes, I have this same problem with repair permissions on one of my external drives. Another drive (a brand new one I got for Time Machine) gave a similar error message when TM tried to format it; I was only able to format it by rebooting in Tiger, after which the drive appears to be fine. So, there are problems with Disk Utility, but I don't have a solution.
-
Problem with Permissions while accessing Portal Content
Dear All,
Im facing some problems with the permission in accessing the portal content.
When i right click on any of the folders in the catalog displayed under the System Administration - > System Configuration -> System Landscape -> Content directory provided by SAP . I get the following Menu options on right click -> NEW -- > Folder, Change ID, Copy, Delete.
I dont get a option such as NEW --> System(from template) which is important to configure the ABAP ECC 6.0 System with the EP 7.0 to enable logon through the Portal to access the ABAP Database through Web browser.
I have installed EP 7.0 JAVA stack alone separately and ECC 6.0 ABAP stack alone separately.
I have tried assigning System Admin Role, Super User Role, Group as Administrators. But nothing seems to work.
Im not sure of the roles to be assigned.
thanks,
Deepak
Edited by: Deepak M on Jul 1, 2009 1:16 PMDeepak,
Try giving the foll roles,
pcd:portal_content/administrator/super_admin/super_admin_role
and groups,
SAP_J2EE_ADMIN
Authenticated Users (GRUP.SUPER_GROUPS_DATASOURCE.AUTHENTICATED_USERS)
Vikram -
hi guys, problem with grey screen and flashing question mark. should be straight forward affair but on top of it while in disc utility, i'm unable to verify, verify disc permission, repair or even erase disc0 which is obviously my main hd. any ideas where to go from here? tried to reinstall osx but no luck, stucked when asked to chose location to install osx. would really apreciate any kind of help with this cause i'm quite new mac user. ty
If you don't have a backup, read this:
https://discussions.apple.com/docs/DOC-1689 -
Pages 08 fonts- problems with Arial, Times New Roman - how do I repair them?
Pages 08 fonts- problems with Arial, Times New Roman - how do I repair them?
Using 10.6.8 on MacBook Pro
MikeaaaI am running Snow Leopard. Transferring the same texts to TextEdit has no problems, so this is a Pages problem, I think. Corruption of Times New Roman and Arial fonts, I suspect, but where? and what do I do about it? I just need to be pointed to a source of advice, I think.
Thanks
Mikeaaa
Maybe you are looking for
-
50 button limit - feature or bug?
I have a 104 page InDesign doc that is being exported as an interactive PDF. On each page are two buttons, one to go to previous page and one to go to next page. When I open the file in Acrobat I get a warning: The file contains NO fillable form fiel
-
Hi I am usin coldfuison 9 and have a grid that gets poplulated by a query in a .cfc The queries work and the grid poplulates except when I try to add a hyperlink to a field that should link to a detail page. Here is my code I am an beginner working o
-
VI not same as LavView Run-Time Engine after 2.0 to 3.1 conversion
I get a dialog Unable to load VI 'Front Pannel Development.vi' with the Run-Time Engine. It is possible that the version of the VI or one of its subVIs is not the same as the LabView Run-Time Engine version. Note : For optimal execution performance,
-
Could not register Active X Control
OS = Windows 7 Professional 32bit Browser = Internet Explorer 8 and 9 (have tried to install on 8, then upgraded to 9 and tried it) Flash Player = 10.1 trying to upgrade to 10.2 This machine is a member of an active directory domain, and I've tried u
-
I updated my operating system to Yosemite. I have Adobe Creative Suite CS5, Photoshop and Illustrator updated with no problem. But now I am trying to use After Effects and it crashes few seconds after it opens. I've tried several times to open the up