Problems with replace file name with starting and ending Bates number

When applying Bates numbers to a set of Acrobat pdf files I am unable to replace file names with the starting and ending Bates number. This is important
for me in a legal application.
The Bates numbers are applied to each page of each of file without any problem as required.
The Bates log file indicates that the files have been renamed as I wanted.
I am running Adobe Acrobat Professional 9 with the update to 9.1.9 and Windows XP Service Pack 3 (the last or current service pack)
In all other respects Adobe Acrobat 9 is running to my satisfaction.
Has anyone else had this problem and found a solution?
HRKExon

Thanks for asking the question, I hadn't heard of Bates numbers before and this gave me a chance to look up something new.
When I googled for ' bates number legal index ' I found this document:
http://www.adobe.com/devnet/acrobat/pdfs/batesnumbering9.pdf
Maybe that will help.
Scott Bonacker CPA
Springfield, MO

Similar Messages

How to find START and END block number in a datafile?

Hi Guys,
I am trying to use dbverify utility with "start" and "end" flags in it. How can I find the starting block # and ending block # of a datafile. I checked v$datafile query but its not very helpful. Any help would be appreciated.
MM

If you mean used blocks, then check out DBA_EXTENTS

Need action to save a copy with original file name with suffix

Hi All,
I am using photoshop 7 (yeah its old, but working fine for me for general purposes). The problem is I have got this new task where I have to provide 3 copies of the same image but with different portions of it. I have several images (.jpeg) which I need to crop two parts of the image and save as two new image files. The requirement is that I need the copy images to bear the same name as the original and with a suffix to identify which cropped portion of the image is it. example, original file name is AB1001.jpg (1600x1200), 1st cropped image name to be AB1001_P.jpg (200x250) and the 2nd cropped image name to be AB1001_Q.jpg(100x180). I have around a 180 files, so need to do it in a batch, pls suggest how can it be done.
Any help in this regard is much appreciated.
Regards
Chhuppa Rustam

While a script would probably be best, photoshop 7 requires
you download a scripting plugin which may or may not install
in photoshop 7 depending on your version.
You can probably do what you want with actions. The file naming part
is not hard, but i have a couple of questions about the cropping.
Are all the images the same size and are the crops in the same position for each?
In other words on the P crop (200x250), is the crop in the same position on each
image or different for each?
MTSTUNER

IDOC to multiple file with dynamic file names with same content

Hi,
My scenario is from IDOC to file.
The number of files which i need to create is dynamic, which depends on the number of plants.
I have a Z-table where i will maintin list of all plants ( non SAP plant names).
I need to fetch the data from this z-table and depending on the nunber of plants i need to create the file for each plant and fiel name should contain plant name in it. EX: abc_<plant>_datatype.txt
I want to use only receiver one CC, and files should be created in the same directory.
Can we do this without BPM?

Hi,
You can use the Mapping lookup concept to fetch the plant names from Z-tables and then you can use the variable substitution technique to resolve your purpose.
Here you need to create multiple interfaces ie.e per plant to create multiple files. You can use common Communication channel for all.
Mapping Lookup
http://help.sap.com/saphelp_nw04/helpdata/en/cf/406642ea59c753e10000000a1550b0/frameset.htm
Mapping Lookups - RFC API
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a03e7b02-eea4-2910-089f-8214c6d1b439
/people/bhavesh.kantilal/blog/2006/11/20/webservice-calls-from-a-user-defined-function
http://help.sap.com/saphelp_nw04/helpdata/en/cf/406642ea59c753e10000000a1550b0/frameset.htm
Variable Substitution
An interesting usage of Variable Substitution in XI
/people/sameer.shadab/blog/2005/09/23/an-interesting-usage-of-variable-substitution-in-xi
SP12 -Variable Substitution option
Receiver File Adapter:Variable substitution :FATAL ERROR
Thanks
Swarup

Custom text component with different start and end points for each line

I'm trying to create a custom component extending textArea in which each individual line in the textArea would have different start and end points. For example, the start/end points for line 1 might be 20 pixels in the front and 35 pixels at the end but start/end points for line 2 might be 25 pixels in front and 20 pixels at the end, etc. These boundary values would be passed in. The width of the entire textArea component would be a fixed size. The result would be something like this:
Jack and Jill
ran up the hill
to fetch a pail of water
depending on the boundary values of each individual line of course. The custom component would take a string and render it in the text component with the appropriate individual line start and end points. I'm trying to do this by adding the text component to the display with the passed in string and then adding in spaces in the beginning of each line and adding a "/n" at the end of the line wherever appropriate based on the start and end values for that line.
Just wondering if I'm on the right track and if anyone has any advice on this.

> Applying the marker places the same icon on all lines of the graph and I need a different one for each
What do you have selected when you assign the marker? It
shouldn't apply to all the markers on the whole graph unless you have all the existing markers selected when you apply the new one.
Assigning marker designs is exactly analogous to assigning bar graph designs.
If you have a single marker selected when you assign the new design, it will apply to only that graph data point.
If you use the group select tool (or option-click with the direct select tool) to reclick on an already-selected marker until all the markers for the same line are selected, and then assign a design, the new design will apply only to the selected line. (You can extend the graph by adding more rows, and the new data points will inherit the marker for the line they are on.)
The thread linked to below demonstrates in more detail how the marker designs are scaled:
http://www.adobeforums.com/cgi-bin/webx/.3bc10970/0

[CF10] CFINPUT custom validation start and end dates

Hello, everyone,
Another developer that I am working with is working with a form that has start and end dates. He'd like to be able to use custom JavaScript validation to make sure that not only are the dates in proper format (that part of the JS is working fine), but that it will also check to make sure that the start date will always be prior to (or equal to) the end date, and will throw an alert if the end date is before the start date.
I've Googled for this, and am finding informative suggestions on just making sure the date is in the right format, or falls within a certain range, but nothing on how to make sure that one date is before (or less than) another.
I'm guessing that data binding might be a part of it. Can anyone suggest how to set these fields so that each has a validateat="onblur" that will check both values?
Also, as a related issue, he has the CF datepicker working as far as entering the dates, but since the field doesn't get/lose focus on this, how do we trigger the function?
V/r,
^_^

i had tried this a few times but I kept getting an invalid numer to character error. Maybe my syntax was off. Let me try again.
I must have had syntax errors. I tried it again, the way you typed it out and it worked. Before I was using '/' instead of '-' to separate the date fields.
Thanks again!!

I just order 8 calendars from iPhoto and they came to me fine. Now I need to order two more but when I go thru the process I get a message saying:unable to assemble calendar. There is a probleme with the photo with the file name"(Null)" more........ .

Would someone be able to explain to me the following issue with Iphoto?
I ordered 8 same calendars for my soccer team and received them fine. Although a couple of pictures on it are a little off (out of focus). I need to order two more of the same calendars but when I go thru the process ireceive an error message saying:
"Unable to to assemble calendar" There is a problem with the photo with the file name "(Null)" The full resolution version of this photo either cannot be located or is corrupt. Please replace this photo or delete it from your calendar.
How can I fine this "corrupt" photo? How did it go thru with the first batch of calendars but won't go thru now?
Thank you for your help.

Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start
with Option #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

I am using OSX 10.9.5 and Outlook Web App for emails. When I download an attachment it replaces the space in the file name with - how can I change this?

I am using OSX 10.9.5 and Outlook Web App for emails. When I download an attachment it replaces the space in the file name with %20 - how can I change this?

Click on the below link :
https://get.adobe.com/flashplayer/otherversions/
Step 1: select Mac OS X 10.6-`0.`0
Step 2 : Safari and FIrefox
Then click on " Download Now" button.

Help with add file name problem with Photoshop CS4

Frustrating problem: Help with add file name problem with Photoshop CS4. What happens is this. When I am in PS CS4 or CS3 and run the following script it runs fine. When I am in Bridge and go to tools/photoshop/batch and run the same script it runs until it wants interaction with preference.rulerunits. How do I get it to quit doing this so I can run in batch mode? Any help is appreciated. HLower
Script follows:
// this script is another variation of the script addTimeStamp.js that is installed with PS7
//Check if a document is open
if ( documents.length > 0 )
var originalRulerUnits = preferences.rulerUnits;
preferences.rulerUnits = Units.INCHES;
try
var docRef = activeDocument;
// Create a text layer at the front
var myLayerRef = docRef.artLayers.add();
myLayerRef.kind = LayerKind.TEXT;
myLayerRef.name = "Filename";
var myTextRef = myLayerRef.textItem;
//Set your parameters below this line
//If you wish to show the file extension, change the n to y in the line below, if not use n.
var ShowExtension = "n";
// Insert any text to appear before the filename, such as your name and copyright info between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextBefore = "Lower© ";
// Insert any text to appear after the filename between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextAfter = " ";
// Set font size in Points
myTextRef.size = 10;
//Set font - use GetFontName.jsx to get exact name
myTextRef.font = "Arial";
//Set text colour in RGB values
var newColor = new SolidColor();
newColor.rgb.red = 0;
newColor.rgb.green = 0;
newColor.rgb.blue = 0;
myTextRef.color = newColor;
// Set the position of the text - percentages from left first, then from top.
myTextRef.position = new Array( 10, 99);
// Set the Blend Mode of the Text Layer. The name must be in CAPITALS - ie change NORMAL to DIFFERENCE.
myLayerRef.blendMode = BlendMode.NORMAL;
// select opacity in percentage
myLayerRef.opacity = 100;
// The following code strips the extension and writes tha text layer. fname = file name only
di=(docRef.name).indexOf(".");
fname = (docRef.name).substr(0, di);
//use extension if set
if ( ShowExtension == "y" )
fname = docRef.name
myTextRef.contents = TextBefore + " " + fname + " " + TextAfter;
catch( e )
// An error occurred. Restore ruler units, then propagate the error back
// to the user
preferences.rulerUnits = originalRulerUnits;
throw e;
// Everything went Ok. Restore ruler units
preferences.rulerUnits = originalRulerUnits;
else
alert( "You must have a document open to add the filename!" );

you might want to try the scripting forum howard:
http://www.adobeforums.com/webx?13@@.ef7f2cb

Replace Unknown Source in EcmaError (JSR223) with actual file name

Hopefully someone here knows how to do this:
In my code, all of the scripts are contained in .js files. Whenever one of the scripts contains an error, I get this:
javax.script.ScriptException: sun.org.mozilla.javascript.internal.EcmaError: ReferenceError: "nonexistant" is not defined. (<Unknown source>#5) in <Unknown source> at line number 5
What bugs me is the <Unknown Source>. Multiple files are in one ScriptContext, and it can be hard to track down an error. It also looks horrible.
Is there a way to replace <Unknown Source> with the actual file name? None of the methods I see support passing a File object, so I'm really confused here.
Cross posted (and unanswered) at:
http://stackoverflow.com/questions/2885120/replace-unknown-source-in-java-rhino-jsr223-with-actual-file-name
http://www.javaprogrammingforums.com/exceptions/4465-replace-unknown-source-ecmaerror-jsr223-actual-file-name.html
http://groups.google.com/group/mozilla.dev.tech.js-engine.rhino
http://mozilla-xp.com/mozilla.dev.tech.js-engine.rhino/Replace-Unknown-Source-with-Script-file-name

You may need to set compile debug option set to true.
I am not sure if my tip is useful for you, anyway good luck.

Problem with keyframe effect - at start and end (crop and scale)

I'm having this odd problem with keyframe effects.
Setup:
I have a gif image that I have on video 1 for say 2 minutes.
I have my real video on video 2. It is a person talking.
First I start with my video full size on top of video 1.
Though the motion and cropping keyframe management I slowly reduce the scale and crop my video image so that it is reduced to the lower left bottom of the screen, on top of the gif, which is now revealed.
My problem is at the start and end of the transition from full video to small box on lower left on top of my gif I often get 1-2 frames where the video goes blank and/or I get a bunch of random red bars on black background appearing on the video - Or I get the gif from video 1 without the video 2 at all (it disappears).
I've tried moving my start of end of the transition to skip the bad spots - but these new transition starts or ends not get their own bad spots in the same way. Its only a couple of frames but it's really unacceptable for the finished video.
Note, when I say transition here I don't mean real transition events, but rather the start of effects that are managed with keyframes. My move from start to end of the effect runs for about 4-6 seconds.
Any ideas?

Bill,
Here is more detail and screen captures.
Concept:
I have 3 minutes of video. It contains a person making a speech. During parts of the speech I want to reveal a graphic image that will be discussed. The speech will begin with the speaker full screen. Half way in, the speaker will shrink down to 45% in the lower left corner of the screen. While the animation occurs (the shrink, move and cropping) it will reveal the graphic below. The graphic will take up the full screen with the speaker at 45%.
Technique:
I put the video in Video 2 and the graphic, a GIF image in Video 1. The scene begins with the speaker talking at full screen. After a minute, I animate the move of the speaker using Motion: Scale and Position and Effect: Crop changing Top, Bottom, Left and Right sides. The animation occurs over approximately 8 seconds.
I am manually adding keyframes at the start and end of the animation. I set the ending state of the video image in the end keyframes. The interpolation between these start and end keyframes should be managing the animation.
Problem:
At the beginning and end of the animation – usually 1-3 frames from the start and 1-3 frames from the end, where the change has barely begun or almost ended, I get these problems. On some frames, the video (in Video 2) completely disappears only showing the Video 1 GIF image below. On other frames, the video image turns black with horizontal red bands half way across.
Troublshooting:
I’ve tried deleting all start and end keyframes and moving the start and end earlier or later to see if I can fix this, but the problem continues to show up in these new locations.
I have added a few screen shots.
1:32:15 is the start of the animation change and 1:40:22 is the end of increasing from the mini video speaker to full size (on top of the GIF).
At 1:40:16 the video image completely disappears only showing the GIF below.
At 1:40:17 its back and slowly increases in size through the interpolation until it is full size at 1:40:22.
Let me know if you need anything else.
Thanks!
Evan

I was messing around with .kext files in the MacintoshHD and now my MacBook Pro won't start up.

I was messing around with .kext files in the MacintoshHD and moved the system.kext and two others to my desktop and deleted the originals and now the MacBook Pro won't start up. All I get at start up is the apple icon then a bunch of text shows up part of which says Mac OS version: not yet set. then the apple icon turns into the power icon and tells me to turn off the computer. I've tried reinstalling from the install DVD by holding down option when powering on and selecting the install DVD and it just goes to a white screen with the apple icon and stays like that. I didn't have the disk utility on my Mac before this happened because I deleted it to make room on my computer a while ago so I'm not sure if that's why it won't load the install DVD but anyone who knows the solution to this with out going to get it repaired would be greatly appreciated. Thank you!

Never mind my dad just found the original install DVD and that worked. Before I was using an install disc that Apple sent me for another issue I was having, but thanks for replying so quickly and trying to help on this Thanksgiving day!!!

Save As with suggested file name and folder

I would like the user to be able to press a save button on the pdf and the "Save As dialogue box" pops up pre-populated with a file name and location choosen. The user can then choose to name the file something otherwise or select a new location. I would just like to save them the steps of copying the field data and finding the correct folder (deeply buried on server) however to place the finished document in.
This doesn't seem to require a trusted function, but how do I suggest the file name based on a field name in the document. And how do I suggest the folder the document should be saved into?
Thanks in adavance.

Hi,
you need a folder level script to use the browseForDoc method.
http://www.adobe.com/content/dam/Adobe/en/devnet/acrobat/pdfs/js_api_reference.pdf#page=10 4

IDoc to File with different file name and data based on the IDoc header dat

Hi,
I got a requirement to implement IDOC to file senario. In this the Converted file should have the file name and file content based on IDoc Header data. Means If one of the IDoc header field value is
'A' - then the file name recieved by reciever system should be 'A.txt' and with the columns A B C D F.
'B' - then the file name recieved by reciever system should be 'B.txt' and with the columns C D F.
In both the case IDoc message type is same.
Please suggest me what i need to do to achieve this.
Thanks in Advance. ...
Regards
Sri

Hi,
As per my requirement, we need to create one file for each IDoc based on IDoc header data. SAP program generates 10 IDocs for each run. All 10 IDoc's message type is same. Each IDoc has one header record with the file name. Base on the name in the IDoc header record, file needs to be created with different columns and file name. Means..
IDoc 01- Header Description contains 'A' - than file will be generated should have name as 'A.txt' and columns 'parent' 'child' 'descripion'.
IDoc 02- Header Description contains 'B' - than file will be generated should have name as 'B.txt' and columns 'Name' 'Department' 'Description'.
IDoc 10- Header Description contains 'J' - than file will be generated should have name as 'J.txt' and columns 'Order No' 'Materail' 'Description'.
Hope this will give more clarity on my requirement. Please let me if you are still not clear on requirement.
Thanks for your all help..
Thanks & Regards
Sreeni

Shared photo-stream, makes long file names with 42 random characters

Windows icloud 3.1, in a shared photo-stream, makes file names with 42 random characters long. It didn't do this in iCloud 2. I have installed iCloud 3.1 on a windows 8.0 and 8.1 machine and two Windows 7 machines. They all do the same thing. It used to give me file names like "IMG_0001.jpg" now it gives me random file names like "01a9fc3363330464233a142486180f0c1622eb9fca.jpg" all the pictures are out order.
Does anyone have fix for this? Does any one else have this problem? I have posted this before and know one else that uses windows seams to have this problem exect me. I did call Apple and they did some research and bumped me up to senior techs and eventuality Apple told me this is working the way it was designed to. This is extremely stupid, I need the sequential file names so the pictures will sort correctly.

I have never found a solution for this.
I did find a Work Around. What I do when I receive a folder full of pictures from another ios iPhone user, I copy all the photos as a batch from the PhotoStream folder into a free Windows program called "FastStone Photo Resizer" from www.FastStone.org. This program allows you to resize the photos as a batch to what ever size you wish. In my case I resize them to 2560 x 1440 which fills my 27" monitor and reduces the file size of each picture from 2MB or 3MB down to about 450 KB without degrading the picture as far as what you see on the screen.
This program will also within the same batch operation, allow you to sort the pictures by "Date Taken" which is the Date and Time the picture was taken. It gets this information from the EXIF data in the jpg file. This program will then rename the files with different numbering format options including date, time, alphanumberic and with just simple numbers starting at what ever number you wish to start with. I can get files that look like this again "IMG_0001.jpg" and have all the pictures in the correct order that they were taken. At this point, I save the pictures directly to a folder on my PC. The cool thing about this is, all the EXIF data is preserved as well. I can process a 100 pictures in less that 60 seconds. I hope this helps. For me, I can now live with this iCloud numbering defect.

Problems with replace file name with starting and ending Bates number

Similar Messages

Maybe you are looking for