Problems with report nodes

when i post the reports,i get the posting message as success but the distribution node status says not posted?
can someone help me?

I have done the following and the problem has been resolved
It seems that your Default local node did not have the authentication option set. You have to set the Authentication option under Node definitions. Go to
PeopleTools >> Integration Broker > >Node Definitions and set the
Authentication Option from 'None' to 'Password'. After this restart the
application server. Also recheck the report node URL and URI host name
specified on the report node definition page. Apart from this also setup the
single signon. Go to PeopleTools->Security-> Security Objects -> Single
Signon and add an expiration time value and for the Message node name insert
your default local node. After saving all this restart your app
server, process scheduler and web server.

Similar Messages

Problems with report builder 3.0 in SCCM 2012 R2 CU2

Hi All
I have problems with editing (Using Report builder) existing reports or creating new ones in SCCM 2012 R2 CU2
We version of SQL we use is SQL 2008 R2 SP2
I already asked this question in the SCCM 2012 forum but the problem is not related to SCCM but has something to do with application report builder
I changed the registry key and edited the Microsoft.ConfigurationManagement.exe.config.xml as described in the following link
http://blogs.technet.com/b/smartinez/archive/2012/07/03/system-center-2012-configuration-manager-create-report-don-t-work-what-do-i-do-now.aspx
Afterwards I try to edit an report I see report builder is being downloaded and after it generates the following error “Application did not succeed. Unable to continue”
Error details are
Following errors were detected during this operation.
* [22-7-2014 13:55:07] System.Deployment.Application.InvalidDeploymentException (HashValidation)
- File, Microsoft.DataWarehouse.dll, has a different computed hash than specified in manifest.
- Source: System.Deployment
- Stack trace:
at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, Hash hash)
at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, HashCollection hashCollection)
at System.Deployment.Application.ComponentVerifier.VerifyComponents()
at
System.Deployment.Application.DownloadManager.DownloadDependencies(SubscriptionState subState, AssemblyManifest deployManifest, AssemblyManifest appManifest, Uri sourceUriBase, String targetDirectory, String group, IDownloadNotification notification, DownloadOptions
options)
at System.Deployment.Application.ApplicationActivator.DownloadApplication(SubscriptionState subState, ActivationDescription actDesc, Int64 transactionId, TempDirectory& downloadTemp)
at System.Deployment.Application.ApplicationActivator.InstallApplication(SubscriptionState& subState, ActivationDescription actDesc)
at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
And in the SmsAdminUI.log I noticed the following error
[16, PID:4460][07/21/2014 14:11:43] :[ReportProxy] - User-specified default Reporting Point [Server1.local.nl] could not be found, [Server2.local.nl] is now the default Reporting Point.
[1, PID:4460][07/21/2014 14:11:11] :System.InvalidOperationException\r\nThere is an error in XML document (1, 1).\r\n at System.Xml.Serialization.XmlSerializer.Deserialize(XmlReader xmlReader, String encodingStyle, XmlDeserializationEvents events)
I removed the reporting point no luck -> I already installed report builder 3.0 local on my computer still no luck.
I hope someone can give me some advice , I am lost with this error
Thx in advance
Regards
Johan

Hi Miss Katherine,
1. I went through the SQL steps in the link you posted
2. I updated the Reg Key and Microsoft.ConfigurationManagement.exe.config file with 3.0 on both the
server and the console machine.
3. I copied the .DLL file from your OneDrive and replaced the existing one on the server.
4. I uninstalled and re-installed the reporting role on the server and received the 1015 in the log.
5. I restarted the server and the client machine
I do get a slightly different error now after using the new DLL
Errors With Original DLL
ERROR DETAILS
* [9/30/2014 8:42:03 AM] System.Deployment.Application.InvalidDeploymentException (HashValidation)
- File, Microsoft.DataWarehouse.dll, has a different computed hash than specified in manifest.
- Source: System.DeploymentERROR DETAILS
Errors With New DLL
ERROR DETAILS
Following errors were detected during this operation.
* [9/30/2014 9:17:13 AM] System.Deployment.Application.InvalidDeploymentException (RefDefValidation)
- Reference in the manifest does not match the identity of the downloaded assembly Microsoft.DataWarehouse.dll.
- Source: System.Deployment

Problems with reports and XML-publisher - No XML

Hi!
I'm having a problem with Apps and XML-publisher. I made a report file, which queries some views. When executing in reports, I get all the data I expect.
Now, when I upload the reportfile to Apps and let it generate XML, my xml-file is empty (well, almost empty)
<?xml version="1.0" ?>

<T03501684>
<LIST_G_PERSOON>
<LIST_G_PERSOON />
</T03501684>
Anyone who can shed any light upon this problem?

OK, finally solved the problem... A good night's sleep always helps ;).
After just trying each queried table one after an other, I found the problem:
The difference between Oracle Apps (Dutch locale) and the reports builder (English) is the language... And our functional people have changed some names, but the Dutch ones, leaving the english names in place and one of the tables I query has language specific data, which is also appears in a where clause.

Data slice inconsistency problem with hierarchy nodes

Hi Experts,
We want to lock planning tables from function. We create the appropriate data slices but there are problems with (material group) hierarchy nodes.
If I give the node as input variable to the function it causes inconsistency in the data slice. If I choose and add this node to the lock in modeler, the problem is the same.
We are using the following variables to create a data slice:
0VERSION
0VTYTYPE
0COMP_CODE
ZGRMAT (developed material group)
Z_YEARCR (developed yera created)
The problem also exist if I set an another type of node e.g. destination country (0RECIPCNTRY) instead of material group.
For me, the problem seems to be generic.
Do you have any idea?
Many thanks in advance
Peter

There is a note related to this proble:
Note 1070608 - Lowflag field is not valid
The implementation of this note resolves the problem.
Peter

Problem with filling nodes of a context with data

hi,
i've got the following problem with filling a controller context:
the context of the controller looks like:
Context
|-Node1 0..n singleton
|-Subnode1 0..n singleton
| |-SubVal1.1
| |-SubVal1.2
|-Subnode2 0..n singleton
| |-Subval2.1
| |-Subval2.2
|-Val1.1
|-Val1.2
that means every Element of Node1 should have its own Subnode-Elements & Val1-Values
in wdDoInit() of the controller I fill the context like this:
Collection Node1, SubNode1, SubNode2
for (Iterator iter = Node1.iterator(); iter.hasNext;) {
 newNode1NodeElement = wdContext.createNode1Element();
 newNode1NodeElement.set... //setting the values
 wdContext.nodeNode1().addElement(newNode1NodeElement);
 for (Iterator iter2=Subnode1.iterator(); iter2.hasNext;) {
 newSubnode1NodeElement = wdContext.createSubnode1Element();
 newSubNode1NodeElement.set... // setting the SubVal1.x
 wdContext.nodeSubnode1.addElement(newSubnode1NodeElement);
 for (Iterator iter3=SubNode2.iterator(); iter3.hasNext;) {
 newSubnode2NodeElement = wdContext.createSubnode2Element();
 newSubNode2NodeElement.set... // setting the SubVal2.x
 wdContext.nodeSubnode2.addElement(newSubnode2NodeElement);
i've got the impression, that all my SubNodes are filled in the first Node1-Element. is there an error in the code above? because in the first place, i see every values in the first Element of Node1-views and if i navigate to the next Element of Node1, every views are empty.
for every Node (Node1, Subnode1, Subnode2) i've got an own view, that maps its context to the corresponding Node of the controller context, e.g for the SubNode1-View:
Context Context
| ....
|- ViewNode ---> ..|- Subnode1
|- SubVal1.1 ---> .. |-SubVal1.1
|- SubVal1.2 ---> .. |-SubVal1.2
in these views, i navigate through the nodes via
wdContext.nodeViewNode().move...()
in the SubNode1-View i see the SubVal1.1, SubVal1.2 (that's what i want) and additional SubVal2.1, SubVal2.2 (that's what I don't want...)
kind regards, achim
ps: i've studied the Master/Detail-Tutorial and i think the choice for cardinality 0..n and type singleton is correct in my case.

hmm, let's look at the code:
for (Iteration Node1) {
newNode1NodeElement = wdContext.createNode1Element();
wdContext.nodeNode1().addElement(newNode1NodeElement);
for (Iteration SubNode1) {
 newSubNode1NodeElement = wdContext.createSubNodeXElement();
 newNode1NodeElement.nodeSubNode1().addElement(newSubNode1NodeElement);
 for (Iteration SubNode1.1) {
 newSubNode1.1NodeElement = wdContext.createSubNode1.1Element();
 newSubNode1NodeElement.nodeSubNode1.1.addElement(newSubNode1.1NodeElement);
 for (Iteration SubNode2) {
 newSubNode2NodeElement = wdContext.createSubNode2Element();
 newNode1NodeElement.nodeSubNode2.addElement(newSubNode2NodeElement);
is there an error in creating the SubNode1.1-Node (bold line)?
if the code is correct, perhaps it's only a viewing problem:
i use views that point on every node and display the values in that node. if i move in the view for Node1 to another node, the values for SubNode1 point to the correct values too, but the values for SubNode1.1 still stay on the old values. is the move of a grandfather node not correctly propagated to his first child?
kr, achim

VAT declaration in XML - Problem with report RFASLDPC

Hello all,
I have a problem with the report RFASLDPC. We use it to download an XML file that we generated which contains the VAT declaration.
In the report RFASDLPC, there is a FORM named QUELLFILE_PRUEFEN which stop the report and display a message : "Data file FILE_NAME is not correct".
The reason is that QUELLFILE_PRUEFEN checks (for Belgium) that the beginning of my document starts with '000000' (six times zero). But this is impossible for an XML file to begin with '000000'. An XML file must begin with "<?xml version="1.0" ?>" or a least "<".
Here is the code :
FORM QUELLFILE_PRUEFEN.
OPEN DATASET PAR_PATH FOR INPUT IN BINARY MODE.
IF SY-SUBRC NE 0.
 MESSAGE E306 WITH PAR_PATH. ''Quellfile nicht vorhanden
ENDIF.
READ DATASET PAR_PATH INTO HLP_RECORD.
CASE PAR_FTYP.
 WHEN 'AT'. ''ASL Österreich
 IF HLP_RECORD(1) NE 'I' OR HLP_RECORD+46(2) NE 'ZM'.
 MESSAGE A185(FR) WITH PAR_PATH.
 ENDIF.
 WHEN 'BE'. ''ASL Belgien
 IF HLP_RECORD(6) NE '000000'.
 MESSAGE A185(FR) WITH PAR_PATH.
 ENDIF.
 WHEN 'ES'. ''ASL Spanien
* IF HLP_RECORD(1) NE '1' OR HLP_RECORD+104(3) NE '349'.
 IF HLP_RECORD(1) NE '1' OR HLP_RECORD+1(3) NE '349'.
 MESSAGE A185(FR) WITH PAR_PATH.
 ENDIF.
 when 'FI'.
 if hlp_record(3) ne '000'.
 MESSAGE A185(FR) WITH PAR_PATH.
 ENDIF.
ENDCASE.
CLOSE DATASET PAR_PATH.
The line :
READ DATASET PAR_PATH INTO HLP_RECORD.
Put the 128 first character of the XML file in HLP_RECORD because HLP_RECORD is defined as :
HLP_RECORD(128) TYPE C
So as I work in Belgium, it is the condition :
WHEN 'BE'. ''ASL Belgien
 IF HLP_RECORD(6) NE '000000'.
 MESSAGE A185(FR) WITH PAR_PATH.
 ENDIF.
which is checked. But this condition cleary check if the beginning of the XML is '000000' and if it is not, it stop the program.
I searched for all the SAP notes about RFASLDPC but I found none about this problem.
Did someone else have also this problem ? Did you find a way to solve this ?
Thank you in advance for your help.
Best Regards.
Gregory Pierre.

anyone has an idea ? ...

Problems With Reports server in Oracle 10g IAS

I am having problems with the reports server. It keeps on giving me the error below
REP-51002: Bind to Reports Server <myreportservername> failed
I am able to correct it by restarting my server while my backup server is off the network and playing around with my server configurations. It works for a while 2 weeks to a month then I start getting the same error again.
Could someone please point out to me where I could be going wrong?
Is there any known problems when 2 IAS are on the same network. I am on Windows 2000 Server.
Thanks
Irene

In rwnetwork.conf change
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE discoveryService SYSTEM "file:/home/oas10g/frhome/reports/dtd/rwnetworkconf.dtd">
<discoveryService>

<namingService name="Cos" host="IP of ur Server" port="14021"/>
</discoveryService>
bounce OC4J_BI_Forms
run naming service.sh 14021

PFD-MAIL Problem with REPORTS 3.0.5

Hi all!
Still have a problem with creating a PDF file as mail attachement.
I installed the latest patch 11 (3.0.5.19) of the oracle runtime and i compiled
the report with the patch.
What happend: Still go the error message if i open the pdf in the mail: "operant xc missing ..."
BUT !! if I create the pdf with the option "FILE" instead of "MAIL" at e.g. c:\test.pdf - its
without any error!
So the question is what is the difference beetween the two ways?????
Have a nice weekend!
Oli

Hi all!
Still have a problem with creating a PDF file as mail attachement.
I installed the latest patch 11 (3.0.5.19) of the oracle runtime and i compiled
the report with the patch.
What happend: Still go the error message if i open the pdf in the mail: "operant xc missing ..."
BUT !! if I create the pdf with the option "FILE" instead of "MAIL" at e.g. c:\test.pdf - its
without any error!
So the question is what is the difference beetween the two ways?????
Have a nice weekend!
Oli

Problem with Report Output in Apps R12

Hi,
I am having some problems with my report output when run under Apps R12. It looks fine when I run in Reports Developer 10g.
The problem is that pages get split into two (i think because there are too many rows). So page 1 of the report will be split into two pages in the Apps report output, and the page number (which is normally at the bottom) displays on the second page as "Page 1 of xx".
I think there is some problem but I don't know what.
I am running the report as Text Output in apps, and using the default Landwide style (which is 180 col x 66 rows). In my report design, I made the dimensions of the body section to be 180 col x 66 rows as well. I also have it set to 8.5 tall x 14 inches wide.
Any suggestions?
Thanks,
Kevin

SQL> set long 1000000
SQL> set heading off
SQL> column cola format a40000
SQL> select cola from clob_dummy;
gfhjtuioep mnhjkie rt-hlospd. ngktio pokdnebtt, gkhohphpdjdbs wmqksxnd - kfnfdkdldkdkdkdkdkdkdkdkdbdsjgdvj h geg.jv ehh shgghsga wshkwlsgsdklghlahgkh lahgkas lhks kglaks gksh a
ssjfsjgskjhghsgskgkksl hgeldhldlkskhdlk dklhkdlkhlkdlhdkfhldkhkhdkhkdhkdhkdkhklhkddkhdkhdkl djhlkdkhdhkshlkd dkhdkhldsjhkslhjd eutywe 398863694 i230e ehgd ehglegighsihdlk eltiweytilhdhgehgisehbkd
SQL>Edited by: Tubby on Oct 3, 2008 11:44 AM

Problem with the nodes in Oracle Portal using JPDK Portlets

Here in Production environment we have 2 different Portal Servers
Even if logged in with the node 'b' then also the images path showing path from node 'a' only.
Note:
The thing is both the Portal servers are sharing the common portal repository.
We are using JPDK Portlets with Oracle Appserver

Does anyone know how to modify an existing report with sub labels within the main report? I am trying to resize one of the labels.
O'Neil

Problem with Reports & Graphics in PDF

Hi,
I generated a report into PDF file which contain layout for Line
Graph, but I can't get multiple colour of line for columns value.
I also have same problem with Pie Chart.Please give me some
advice.
Thanks in advance.
null

A month ago I have a problem with my pdf output because of TURKISH Characters. I applied this method as you can see below for solve this problem...
1. Go under the following path: $COMMON_TOP/util/java/1.4/j2sdk1.4.2_04/jre/lib/fonts
2. Copy all the ttf font files under <FND_TOP>/<APPLRSC>/ to that path
3. Bouns the Concurrent Manager and the Apache Server
4. Retest the issue.
5. Migrate the solution as appropriate to other environments.

Problems with Reports: REP:6205

I work with Reports Builder 9.0.4.0.21.
When I open a matrix report appears he following message:
REP-6205: el atributo de identificador de la etiqueta rw:headers no es único
(ID attribute of rw:headers is not unique)
I don´t know why, because I´ve created the roprt with the report assistant
May anyone help me?
thanks in advance
Beatriz

Hi,
I´ve read the jsp code and I´ve found some <rw:headers id, but they are different:
rw:headers id="HFPPCTRAMOEDAD35"
rw:headers id="HFNUM35"
rw:headers id="HFPORCEN35"
rw:headers id="HFINDICE35"
rw:headers id="HFSumNumPerPPCNIVEL35"
rw:headers id="HFSumPorcenPerPPCNIVEL35"
rw:headers id="HFSumIndicePerPPCNIVEL35"
What is the problem?
Thanks
Beatriz

WWI server problem with report shipping order

Hi everybody,
we have a problem with the WWI server and report shipping orders for Inbound documents (PDF):
after we created an entry in CVD1 and using buttons "Accept" and "Ship immediately" we run the report RCVDEVEN. First time we did it the WWI server started working and ended with error but assigned the correct PDF. After that, the WWI server didt start anyway.
First error message:
The description for Event ID ( 91 ) in Source ( PRD ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: PRD.
Second error message after second attempt:
The description for Event ID ( 95 ) in Source ( PRD ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: 09/14/09 17:59:49 Start Function 'WWI_SERVER_INFO'
Initializing parameters
Initializing Tables
Receiving data from client
Sending data to client
Elapsed time : 0.1 sec.
OSS note 1058521 has already been found - but nothing described here is relevant for us: the RFC connection is working, the WWI monitor shows the server up and running.
Any ideas?
Thank you very much in advance and best regards,
Christoph

Hi folks,
fixed the problem myself. There have been some documents with error in the printer queue of the WWI server.
Best regards,
Christoph

Problemas with reports: REP -1247

I work with Reports Builder 9.0.4.0.21.
When I run a report appears the following message:
REP-1247: report contains uncompiled PL/SQL
I´ve created the report, compile and run ok. Then I've saved the report and when I open reports builder and try to execute the report appears the error.
What is the problem? I`ve compiled before saving the report
May anyone help me?
thanks in advance
Beatriz

I compile in pl/sql editor, and the reports run; but when I open the report again, the report is not compiled, and I go to Program->Compile->Whole, and I save the report. When I open the report again it is not compiled.
I don´t have compile option in file->administration, is it wrong?
Thanks
Beatriz

Problems with discover Nodes

I have problems with autom. discover of nodes.The services Man.server and agent are started, but i get
the errormsg:Discovery failed:VNI-4009: Cannot contact agent on the node.
Can someone help me.
Thanks.

what os are you running?
on my linux box, what i did was to delete *.q and services.ora from $ORACLE_HOME/network/agent then manually put in my instance in tnsnames.ora using the example used in http://www.mike-devlin.com/oracle/tnsnames_ora.htm. i made sure that the instance was up then ran lsnrctl start and agentctl start. OMS was able to discover my database automatically after that.
i do have a feeling that you are using Win2k/XP, but the files i mentioned can be located in the same directory. instead of lsnrctl start and agentctl start, you can go to Administrative Tools>Sevices and start OracleOra92TNSListener and OracleOra92Agent
i would recommend, however, trying to use netca when recreating the tnsnames.ora. it just didn't work with mine so i had to do it manually.

Problems with report nodes

Similar Messages

Maybe you are looking for