Problems with reports run from the MSS Launchpad

Hi,
The problem I am facing is with the reports being run from the MSS Launchpad. When i click on it, I can see that certain buttons like "Selection Fields", "org Assignment" are disabled. But there in one more button "More" which is enabled and clicking on it gives all the disabled options as enabled. However when the report window is maximized, the button "More " vanishes and all the buttons become disabled.
I need to enable all the buttons now showing as disabled. Eagerly awaiting your reply.
regards,
Pinki

Hi,
Thanks for the reply. But can you please let me know how?
regards,
pinki

Similar Messages

I have a 13.5 month old Ipad2, wifi only that has had problems with wifi com from the beginning. I am learning that this is not unusual for apple. Any suggestions?

I have a 13.5 month old Ipad2, wifi only that has had problems with wifi com from the beginning. I am learning that this is not unusual for apple. Any suggestions?
ronald1094

Try #5.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

HT1338 We are currently running CS3 on Macs with OS 10.5.8 but need to upgrade the OS in order to prepare e-books. Will we have any problems with CS3 running on the later OS?

We are currently running CS3 on Macs with OS 10.5.8 but need to upgrade the OS in order to prepare e-books. Will we have any problems with CS3 running on the later OS?

Check the Adobe website for compatibility.
Ciao.

I have a problem with your purchase from the App Store

I have a problem with your purchase from the App Store
To understand the problem as well as view images on a flow
https://www.icloud.com/photostream/#A7GI9HKK27lHY

You will need to do what it says, contact iTunes Support. These are user-to-user support forums, if you thought you were contacting Apple by posting here. Go here:
http://www.apple.com/emea/support/itunes/contact.html
to contact the iTunes Store.
Regards.

Problems with iMovie downloaded from the App Store

I downloaded iMovie 11 from the App Store Yesterday. When I try to use it I get this message, "Missing QuickTime Component." "The QuickTime component necessary to view, edit, import and export MPEG2 movies is not installed." "It is included with the iMovie installed, Please re-install." I have tried to re-download it from the App Store and then get the message "Installed." I have searched the Apple site for information as to how to accomplish this to no avail. I have looked at the iMovie Help files all to no avail. Can anyone please tell me what to do to fix this. When installing from the App Store you do not seem to get a standard installer.
Thanks to anyone who can help fix this problem.
Mike

When installing from the App Store you do not seem to get a standard installer.
True.
I have found that the physical possession of the software on a DVD or CD is a better way to go.
In the event you have a computer problem and must rebuild your system or reinstall software, it is always easier to do so if you have the physical media in your possession.
I would spend a few dollars more and purchase the iLife 11 disc.

I am having problems with video playback from the Internet such as you tube on my iPad. What's up?

I am having trouble with video playback from the Internet such as you tube. What's up?

Your video playback will also depend on your net speed. If you have slow internet, you will stream video slow. If your video stops and starts, you can try pausing it for a minute or so and then try to watch. Let more of it buffer before you try to watch.
Sometimes your connection is so slow you literally play faster than it buffers, which means it stops and stutters continually

Problem with deleting record from the report.

This is my first post here, just to let you know I just started playing with Apex.
Here we go:
I have a page with report where the link to the record I have changed with ULR to the javascript:
javascript:doDelete(#RECORD_ID#)
I have created javascript in the HTML Header of the page
<script>
function doDelete(id) {
if (confirm("Are you sure you want to delete selected record?"))
$x('P3_DEL_ID').value=id;
doSubmit('DELETE');
</script>
and finally created a process for the page On Submit - After Computations and Validations.
declare
var_id number := :p3_del_id;
begin
commit;
Delete from mytable where record_id = var_id;
commit;
end;
I don't get error messages but record is not deleted.
Thanks for help in advance.
Robert

Robert,
That's the problem. With that type selected, change the value in the textbox to just: DELETE
Regards,
Dan
http://danielmcghan.us
http://sourceforge.net/projects/tapigen
http://sourceforge.net/projects/plrecur
You can reward this reply by marking it as either Helpful or Correct ;-)

Problems with downloading files from the internet?

I have Mozilla Firefox and Safari on my macbook. For some reason it will not let me download things from the internet. Whenever i keep a download link, the page never loads....can anyone put some insight into my problem?
Justin Evans

Since a few hours, I have the same problem like you. I uninstalled Firefox, because I thought it was a problem with it, but then i started Safari to redownload Firefox and guess what happened.. nothing. I can't download anything. don't know why. does anyone know whats wrong??

Problems with downloading videos from the internet....please help

sorry if this the wrong forum to post but I don't know where else to post my issue.
Normally when I download videos from the internet I click on "window" then "activity" then the largest file ie ? of ? (which is the MB file) and it downloads then I use isquint to put it to mp4 format. However now when I do that the file I download says that "video _ts folders can't be directly converted" and there is a button that says "Inadequacy". I can't even download videos from youtube. Any help would be great.
thank you

Other than the videos on YouTube, can you post a link or URL of the videos you having problems with for us to test out for you?
I use Firefox which has quite a few video converter add ons that allows downloads of any type of video from the net. The one I use is called +Flash Video Downloader.+
"Is there anything else I need to have installed in order to be able to download videos?"
The latest versions of the following:
QuickTime
RealPlayer
Flip4Mac
VLC Media Player
Perian (AVI and FLV support)
"I also have divx and 3ivx installed"
You can get rid of those if you have any of the above installed.
" Mac OS X (10.5.2)"
Use Software Update to update your OS which is seriously out of date. The last version of Leopard I believe was either v5.6 or v5.8. Also, update all the other things listed that pertain to the OS & your model computer if applicable to your needs.
!http://i50.tinypic.com/izvwo1.gif!

Problems with corrupted songs from the iTunes store

Hi there.
I am having problems with some of my purchases from the iTunes store. There are 8 songs from my last 50 purchases or so, that will not download properly. I get error message 100008, saying the file seems to be corrupted and that I should thus try to check my purchase history and re-download. I've tried that many times, but to no avail. I have also tried to deauthorize my computer and then reauthorizing it. Still nothing happens.
Any help would be welcome.
Best regards,
Umahro

Oopss. Wrong forum, as I am using Leopard on a MacBook Pro. Sorry about posting in the wrong forum.
Best regards,
Umahro

Had problems with Snow Leopard from the get-go.....

.....but I was finally able to take my desktop to a local Genius Bar today and the fix was found within minutes.
The problem I was having was that iCal wouldn't open in Snow Leopard. It would just bounce in the dock a few times and then slam shut.
Turns out that the iCal preference files just couldn't make the transition from Leopard to Snow Leopard.
So I made an appointment and took my desktop to the Genius Bar this morning at the Freehold Mall. Turns out it was a simple fix to go from Leopard (10.5) to Snow Leopard (10.6).
I just couldn't get iCal (that I rely on) to work in Snow Leopard and all I had to do was delete the preference files from Leopard (after the switch to Snow) since they got corrupted during the change from Leopard to Snow Leopard. A five second fix......DUH!!!
Cost for the "fix"? Just my time to take it there.
Snow Leopard is now my operating system and it absolutely KICKS *** speed-wise!!!

This has happened to me (I think twice in 2 years). Nowadays I sync notes to iCloud, so if a note is lost, it is almost all recoverable.

Problem with displaying records from the database in a table ui element

Hi,
Iam creating an application which retrieves data from an oracle database. Iam able to connect to the database and retrieve the data in a result set. Then I try to set these values in a context node as follows,
while (resultSet.next()) {
String name = result.getString(1);
String EmpId = result.getString(2);
IEmpNode node = wdContext.nodeEmp();
IEmpElement el = node.createEmpElement();
el.setName(name);
el.setEmpId(EmpId);
node.addElement(el);
where the context structure is emp(node)
---name(attribute)
---empId(attribute)
Then I have bound the node emp to a table ui element.If I try to deploy this it comes up with Internal Server error.
But if try this way, without creating a node, only with attributes name and empId,
wdContext.currentContextElement.setName(name);
wdContext.currentContextElement.setEmpId(EmpId);
and binding the attributes to inputfields in the view, Iam able to see the last record in the database table.
So where am I going wrong while using the table ui element?
Regards,
Rachel

Hi
Try this
//Create the node in outer of while loop and bind to Table UIElement
IEmpNode node = wdContext.nodeEmp();
while (resultSet.next()) {
String name = result.getString(1);
String EmpId = result.getString(2);
IEmpElement el = wdContext.createEmpElement();
el.setName(name);
el.setEmpId(EmpId);
node.addElement(el);
Kind Regards
Mukesh

Problem with forwarding photos from the camera roll to Facebook

When I go to the camera roll and select a picture and then tap on the forward icon, the Facebook option has gone and has been replaced with tweet.
I have deleted the Facebook app and reinstalled it, I have reset my iPhone numerous times but nothing has changed.
Does anybody have a solution or a reason why this has happened?

Yes, tweet is on ly avalible
iOS 6, which is out in * days will have the facebook notifaction on

Problem with FMS triggering from the FatherCard field

Hi All,
I'm attempting to populate a UDF when a user updates the "Consolidating BP" field on the Business Partner form however, this doesn't seem to be working.
I initially used a simple query for the FMS to prove that the field had recognised it had been populated (using the query "SELECT $[OCRD.FatherCard]") and this seemed to work fine. The issue is the field used to trigger this when amended, as neither "Consolidating BP", "Father Card" or any other field I can find that may look to be related appears to trigger the FMS and populate the UDF.
I've attempted to link this with any field that looks remotely like it could refer to the "Consolidating BP" field e.g. "Channel BP", "Linked Business Partner" and "Other Receivables/Payables" in addition to many other random fields, but with no luck.
Does anyone know of issues linking FMS's to this field on the BP screen? Or alternatively why this may be an issue?
Thanks!

Hi,
Not all fields in the form can trigger FMS update. Only few key columns have such ability. FatherCard is not among them.
Thanks,
Gordon

Problems with a purchase from the iTunes

My purchase could not be completed

If you are also getting a message to contact iTunes Support then you will need to do so (these are user-to-user forums) :
- go to http://www.apple.com/support/itunes/ww
- click on your country's flag
- click on the Contact Support at the bottom of the left-hand column
- click on Contact iTunes Store Support on the right-hand side of the page
- then Purchases, Billing & Redemption

Problems with reports run from the MSS Launchpad

Similar Messages

Maybe you are looking for