Problems with running DVDs/CDs on the Windows side

Hey there,
I've been having some problems running some DVDs and CDs on my drive on the Windows side. It works fine on the Mac side. The only thing that run properly is the Mac Installation CD. When I pop in a DVD movie, it functions 90% fine. But when I pop in a blank CD/DVD to burn something or run a CD of Data, it won't work.
Does anyone know why? And how to have it work?

See if this works for you.
http://discussions.apple.com/thread.jspa?threadID=1997372&tstart=0
Let me know if it works,
Kevin

Similar Messages

IMac running dual boot with a flipped screen on the windows side

We have a bunch of computers at a Middle School running dual boot and on the windows side the kids figured out how to flip the screens but we can't get them back. Tried cntrl alt and the arrows and also shift alt and arrows and nothing works.
Any ideas???

See if this works for you.
http://discussions.apple.com/thread.jspa?threadID=1997372&tstart=0
Let me know if it works,
Kevin

Problem with model N73. Sometimes the other side h...

I have Nokia N73 and in start very big problem. Sometimes someone which I speak with complain that hear me very bad, with noise, sound like a robot (Level of signal on the both sides is exelent). It is a new phone, and I sent it to Nokia servis. They reinstalled software and sent me phone back, but after 2 or 3 days I used a bluetooth headset in the car and the problem reappeared. The same thing was when I disconected bluetooth headset. In a setup of phone there is one option "Network mode" with 3 suboptions: Dual mode, UMTS and GSM. Initialy it was setup on Dual mode. I changed to GSM. After reseting phone the problem was disappeared, but I am not sure that the problem is solved.
I'll be very greatfull if anybody know what is the problem, and posibly solution.

I have the exact same problem. Everything works great exept for the fact that everyone I speak to using Bluetooth headsets complain that I sound "tinny", "weak" or "robot-like".
I've tried with two different headsets (Jabra JX10 and Nokia BH-200) and the problem is the same. I have also tried to reset the headsets, delete pairing and pair them all over again - still the same problem.
Seems like the Bluetooth and 3G signals/frequencies may interfere with each other or something.
The wired headset that came with the phone works without problems. Problem is only there when using Bluetooth headsets.
Any solution?
Regards,
Michael

Problem with pages when it restores the windows

hi,
my problem is that when I open Pages', it says :
"application "Pages" has unexpectedly quit during the restoration of its windows. Would you like to try again to restore its windows?"
and after that it goes down. So I cant't use it.
I'm sorry if my English is not very good but the reason is that I'm french.
Looking for your answer , thank you for paying attention to my problem.
nicolas

Hello happy English users, I'm glad to meet a French asker.
So, I apologize but I will speak French.
Bonjour
Nicolas.
Nos hôtes américains sont habitués à ce que je répondes en Français aux questions posées par des francophones.
Quel est le système d'exploitation que vous utilisez et quelle est la version de Pages en service.
Donnez également le message exact en Français.
À plus.
Yvan KOENIG (VALLAURIS, France) dimanche 11 décembre 2011 14:52:18
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

Problems with applet - no text in the window

Hi!
I'm trying to learn some java, and I've just done my first applet. The code looks like this:
import java.awt.*;
import java.applet.*;
public class MittNamnApplet extends Applet {
Font f;
public void init() {
f = new Font("SansSerif", Font.BOLD, 24);
setBackground(Color.pink);
public void pain (Graphics g) {
g.setFont(f);
//g.setColor(Color.blue);
// g.drawString("Habibi", 45,100);
And then I made an html code that looks like this:
<html>
<applet code="MittNamnApplet.class" height=200 width=320>
</applet>
</html>
When I run it with appletviewer in Command prompt there is only a pink squre coming up, where is the text??? Why? Can someone please help a dummie?
Thanks ;-)

The method name should be "paint", not "pain".
And you have commented out the g.drawstring statement, so it doesn't draw your name.

Problem with File Content Converion at the Receiver Side

Hello
 I have an xml file which is in this format.
<?xml version="1.0" encoding="UTF-8"?>
<ns0:OUTPUT_ITALY_FORMAT_TYPE xmlns:ns0="urn:sli-payment-files:prototype">
 <FEBRITRH>
 <Filler/>
 <RH/>
 <ABI_Code/>
 <SIA_Code>65318</SIA_Code>
 <Creation_Date/>
 <File_Identifier/>
 <Filler1/>
 <Application_Center/>
 </FEBRITRH>
 <FEBRIT61>
 <Filler/>
 <SixtyOne/>
 <Accnt_Number>0000001</Accnt_Number>
 <Filler1/>
 <Blank/>
 <Number/>
 <Description/>
 <Accnt_Code/>
 <Bank_DIgit/>
 <ABI_Code>06230</ABI_Code>
 <Bank_Number>01653</Bank_Number>
 <Bank_accnt>000043185249</Bank_accnt>
 <Currency_code>EUR</Currency_code>
 <Accnt_date>030204</Accnt_date>
 <Constant/>
 <Amnt/>
 <Filler2/>
 <FEBRIT62>
 <Filler/>
 <Constant/>
 <Accnt_number>0000001</Accnt_number>
 <Record_number>1</Record_number>
 <Value_date>040204</Value_date>
 <Posting_Date>030204</Posting_Date>
 <Constant1>C</Constant1>
 <Amnt>0000000000471.58</Amnt>
 <Transaction_Code>Z2</Transaction_Code>
 <Bank_Code>Z1</Bank_Code>
 <Blank/>
 <Reference_Number>2535394</Reference_Number>
 <Reference>86</Reference>
 <Additional_reference>VERS.***.IST./SU PIAZZA/CIRCOLARI/</Additional_reference>
 </FEBRIT62>
 <FEBRIT63>
 <Filler/>
 <Constant/>
 <Accnt_Number/>
 <Record_Number/>
 <Text>POSTALI/TURIST</Text>
 </FEBRIT63>
 </FEBRIT61>
 <FEBRIT64>
 <Filler/>
 <Constant/>
 <Accnt_Number/>
 <Currency_code/>
 <Accntg_Date/>
 <Constant1>C</Constant1>
 <Amnt>0000000000471.58</Amnt>
 <Constant2/>
 <Cash_balance/>
 <Filler1/>
 <Balance/>
 </FEBRIT64>
 <FEBRITEF>
 <FEBRITEF_1/>
 <FEBRITEF_2/>
 <FEBRITEF_3/>
 <FEBRITEF_4/>
 <FEBRITEF_5/>
 <FEBRITEF_6/>
 <FEBRITEF_7/>
 <FEBRITEF_8/>
 <FEBRITEF_9/>
 <FEBRITEF_10/>
 <FEBRITEF_11/>
 <FEBRITEF_12/>
 </FEBRITEF>
</ns0:OUTPUT_ITALY_FORMAT_TYPE>
Now i need to convert the above file into a text file when i get the o/p in xml format. I have tried using file content conversion but i am not able to get the solution right. Could anyone let me know as to how should i specify the recordset structure parameters if i need a comma between the fields in each of the structures.Also if u could let me know the other important parameters it could be of great help.
Thanks and Regards
Sharat

Hi Sharat,
Your File format is like
Source Message Type
| - FEBRITRH
| - | - field1..
| - | - field2.. etc
| - FEBRIT61
| - | - field1..
| - | - field2.. etc
| - FEBRIT64
| - | - field1..
| - | - field2.. etc
| - FEBRITEF
| - | - field1..
| - | - field2.. etc
Create a Target Message Type like
Target Message Type
| - Recordset
| - | - FEBRITRH
| - | - | - field1..
| - | - | - field2.. etc
| - | - FEBRIT61
| - | - | - field1..
| - | - | - field2.. etc
| - | - FEBRIT64
| - | - | - field1..
| - | - | - field2.. etc
| - | - FEBRITEF
| - | - | - field1..
| - | - | - field2.. etc
Do all your mappings and
Define a Receiver File Adapter with Following Configuration
Message Protocol File Content Conversion
Content Conversion Parameter
Recordset Structure Recordset, FEBRITRH, FEBRIT61, FEBRIT64, FEBRITEF
Name value pair would be
Recordset.endSeparator nl
FEBRITRH.fieldNames field1,field2
FEBRITRH.fieldSeparator - , (or | )
FEBRIT61.fieldNames field1,field2
FEBRIT61.fieldSeparator - , (or | )
FEBRIT64.fieldNames field1,field2
FEBRIT64.fieldSeparator - , (or | )
FEBRITEF.fieldNames field1,field2
FEBRITEF.fieldSeparator - , (or | )
Hope this Helps,
Vijay

MOVED: Problem with SATA DVD/RW

This topic has been moved to AMD64 nVidia Based board.
Problem with SATA DVD/RW

I use the Plextor PX-712SA's with no issues. However...I do not believe the SATA versions require jumpers. Try plugging them in on SATA port 1 or 2, making sure those are enabled in BIOS of course. Make sure all connections are secure. There have been some issues with these particular drives not operating properly, but it has not been an issue with seasoned system builders, so the problems may be with the builder himself. Usually, Plextors are so good, they'll almost burn a paper plate! Try a different medium, maybe another brand of blank CD or DVD.
You may also want to check Device Manager in Windows, to see if it is listed "This device is working properly"!

Problems with running Applet through HTML

I am currently having problems with running my file through the HTML. For some reason when I open it in the browser it keeps saying Error. I am programming in NetBeans.
The code I am using is:
<html>
<head>
<title></title>
</head>
<body>
<applet code=”CarApplet.class” codebase="RedCarApplet.jar" width=690 height=300></applet>
</body>
</html>

Heres the error message, I see that it cannot find the class I have stated above. Any solutions?
My class is in the 'build' folder but, the HTML file is in the 'src' folder. Now my applet contains a 'jar' file, do I need to add that to the HTML code?
load: class ‚Ä?TunerApplet.class‚Ä? not found.
java.lang.ClassNotFoundException: ‚Ä?TunerApplet.class‚Ä?
 at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source)
 at sun.plugin2.applet.Plugin2ClassLoader.loadClass0(Unknown Source)
 at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
 at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
 at java.lang.ClassLoader.loadClass(Unknown Source)
 at sun.plugin2.applet.Plugin2ClassLoader.loadCode(Unknown Source)
 at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source)
 at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
 at java.lang.Thread.run(Unknown Source)
Caused by: java.io.FileNotFoundException: C:\Users\*****\*******\NetBeansProjects\RadioApplet\src\‚Ä?TunerApplet\class‚Ä?.class (The system cannot find the path specified)
 at java.io.FileInputStream.open(Native Method)
 at java.io.FileInputStream.<init>(Unknown Source)
 at java.io.FileInputStream.<init>(Unknown Source)
 at sun.net.www.protocol.file.FileURLConnection.connect(Unknown Source)
 at sun.net.www.protocol.file.FileURLConnection.getInputStream(Unknown Source)
 at sun.plugin2.applet.Applet2ClassLoader.getBytes(Unknown Source)
 at sun.plugin2.applet.Applet2ClassLoader.access$000(Unknown Source)
 at sun.plugin2.applet.Applet2ClassLoader$1.run(Unknown Source)
 at java.security.AccessController.doPrivileged(Native Method)
 ... 9 more
Exception: java.lang.ClassNotFoundException: ‚ÄùTunerApplet.class‚Äù

Is anyone experiencing problems with opening mission control from the desktop. Running mountain lion with parallels 7 and windows 7

is anyone experiencing problems with opening mission control from the desktop. Running mountain lion with parallels 7 and windows 7

I had been having a similar problem on Lion with Safari pdf files despite downloading the latest Adobe Reader XI.
I would constantly get the same messages - There was an error opening this document. The file is damaged and could not be repaired. And I would get a blank page when I tried to print the pdf if I tried printing from the Safari web page using File - Print from the top toolbar on my laptop.
Then I came across the grey Safari lozenge with action icons.
This allowed me, without downloading the pdf, to print the pdf file direct from the Safari page by using the Print icon on the grey lozenge that appears centrally three quarters down the screen.
Then I discovered that if I save the pdf using the Save icon from this same grey lozenge on the Safari page I can open and print this pdf version from my desktop.
I've tested it with a couple of different pdf files and these methods work using the grey lozenge icons but the same pdfs files don't work using File - Save As on the Tool Bar.

I have a problem with running an EXE file on win2000, the Lab View is 5.1 and I do not know if it is 16 bit...

I have a problem with running an EXE file on win2000, the Lab View is 5.1 and I do not know if it is 16 bit...what should I do?

Hi Arika,
The drivers that you need to install to make your executable work depends on what your executable is doing. To get started, you need to have the LabVIEW Run-Time Engine installed on your target machine (the Win2000 machine you are planning to use) in order to run your executable. Next, you need to determine what drivers your executable uses, if any. For example, if you are using GPIB instrument control, you will need to install the NI-488 drivers on your target machine. If you are performing data acquisition, you will need to install NI-DAQ drivers. If you are doing image acquistion, you will need to install NI-IMAQ drivers.
All these drivers are available for downloading on ni.com. To get the drivers, go to ht
tp://www.ni.com/support , click on the link that takes you to Drivers and Updates (under Option 3), and click on the links to get to the driver(s) you need. For example, if you need the LabVIEW 5.1.1 Run-Time engine, click on the All Drivers and Updates by Application link on the main page (http://www.ni.com/softlib.nsf/). Then click on the LabVIEW link, Windows 2000, Run Time Engine, and then you will see the link to get to the page to download the LabVIEW 5.1.1 Run-Time Engine.
I hope this information helps.
Best Regards,
Wilbur Shen
National Instruments

Problem with running the midlet class (Error with Installation suite )

hi everyone...
i have problem with running the midlet class(BluetoothChatMIDlet.java)
it keep showing me the same kind of error in the output pane of netbeans...
which is:
Installing suite from: http://127.0.0.1:49296/Chat.jad
[WARN] [rms ] javacall_file_open: wopen failed for: C:\Users\user\javame-sdk\3.0\work\0\appdb\delete_notify.dat
i also did some research on this but due to lack of forum that discussing about this,im end up no where..
from my research i also find out that some of the developer make a changes in class properties..
where they check the SIGN DISTRIBUTION...and also change the ALIAS to UNTRUSTED..after that,click the EXPORT KEY INTO JAVA ME SDK,PLATFORM,EMULATOR...
i did that but also didnt work out..
could any1 teach me how to fix it...
thanx in advance... :)

actually, i do my FYP on bluetooth chatting...
and there will be more than two emulators running at the same time..
one of my frens said that if u want to run more than one emulator u just simply click on run button..
and it will appear on the screen..

I ve a problem with running the javabeans

dear all
i ve a problem with running javabean in forms 9i all codes, program units are correct. i think there is something with classpath which i dont where to put the path of bean jar files. however the simple code for the Colorpicker and keyFilter dont work when clicking the button to fire the trigger to bring the bean up.
thank you
Walaa eddien

Walaa,
Make sure you've entered the implementation class (do not append the class extension). For example, if you have a class example.class in the package otn.oracle.forum, the implementation class should be: otn.oracle.forum.example
Make sure you place the containing java archive in <OH>/forms90/java and do not forget to update the configuration section (default or app specific) parameter archive_jini accordingly.
Jeroen van Schaijk

HT2801 Problem inserting DVDs/CDs in the slot on a MacBook Pro.

A physical obstruction is preventing me from inserting DVDs/CDs in the slot on my MacBook Pro. There is no disc already in the drive. I am almost 100% certain that no foreign object could have been inserted either accidentally or maliciously. Please help!

From the menu bar, select
 ▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Delete All. Close the preference pane.
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Test.
If you use a FireWire audio interface, disconnect it and test again. If you don't know what a FireWire audio interface is, you don't have one.

Problem with running StageVideo

Hi.
I've got a problem with displaying a video in a stagevideo layer. I recently finished a project which involved a video background. Because the video is quite large (1400x572) and takes a lot of memory/CPU, I decided to run it in a StageVideo layer. After a series of testing, me and my animator, decided to use a FLV format. All was fine, until the last update. Client has came to me, that the video in a background in extremly bright.
1. The problem exists in all browsers, running regular flash player 11,2,202,229 or 11,2,202,228.
2. When I use a debugger version of flash player all works great - although I might have not used the latest version (uninstalled and didn't note it).
3. When I reverted to 11,2,102,63, the problem disapeared - it looks like it came with the latest update.
4. The problem occurs only if i use video in .flv format. f4v or mp4 version of the same video displays regular.
Below is a screen of the problem. Mind, that the saxophone gay on the right is also a video in FLV format, but embedded not in a stage video, but as regular video in a container on the stage. And it displays normal. Problem occurs only in a stagevideo.
I've found some comments on other bugs related to video in latest updates, but they seem to be different - green screens or strips or strage colors. Nothing related to brightness or gamma.
Note: I need to use the FLV format. If I use F4V or MP4 format, I've got problems with looping a part of the video. It has an intro (0-14 sec), then loop part (14-15 sec) and ending (15-18 sec). In f4v or mp4 despite that I jump from 15 to 14 sec (in a loop), somehow it jumps from 14 to 13 or even from and to another moments in the video. And, in addition, it stops for like 2-3 frames.
That's for your help.
Lucjan Michałowski.

Me again...
I forgot to mention few things:
1. The problem occurs on all computers and all browsers. I had access only to PCs running Windows 7, so ATM can't tell if it occurs on ealier versions of Windows. On MAC, as my friend reported, the problem is not only with FLV, but with F4V as well. However it's doesn't seem to be hardware related.
2. When I switch to regular video (in a container on a stage) it works well, but it slows the site too much to use it as a reliable solution.
Can anyone comment on it please? Is it a bug... or feature? Is there any way to fix this, or work around (make other movie formats work)?

Problem with runas command. Elevation error

Running on Win 8.1 Pro I'm facing a problem with runas.
What I'm trying to do is launch an mmc as my domain admin account.
Therefore I type this command from an elevated cmd (Right-click "Run as Administrator"):
runas /user:Contoso\MyDomainAdmin /noprofile mmc
This worked like a charm in Windows 7, and on my Win81Pro client it yields:
RUNAS ERROR: Unable to run - mmc
740: The requested operation requires elevation.
The account I'm logged in with, is local admin, and the UAC slider is set in the bottom.
In the eventviewer, I only see some special logons where my normal account is trying to impersonate my domain admin account, and the next event, the domain admin's session is destroyed.
If this is by design, how would I then run mmc as my domain admin and at the same time avoid its credentials being stored on the local machine?
Thanks in advance!

yes, you need to be local admin to be able to elevate!
I've tested this on a system here and I reproduce the issue you encountered. Some investigation showed running a program that requires elevation using runas is not possible http://msdn.microsoft.com/en-us/library/bb756922.aspx
MCP/MCSA/MCTS/MCITP

Problems with running DVDs/CDs on the Windows side

Similar Messages

Maybe you are looking for