Problems with sample rate

hello:
I have a sound blaster audigy platinum ex and I'm trying to make some recordings with adobe audition, but this program works at 44khz and the sound card seems to work only at 48khz, so it doesn't let me recording. how can I change the sampleing rate of the card?
thanks.

By setting it in Audition audio settings. W/ ASIO device drivers you can have 16-bit/48kHz (and IIRC, 24-bit/96kHz) mode(s) only). For other modes you need to use other device driver mode. Also, Asio4All should handle all modes (16/24-bit and 44.1, 48 and 96kHz).
- http://www.asio4all.com
The quality in 44.1kHz mode is POOR for your card. If you switch to 24-bit/44.1kHz quality is otherwise better but the frequency gets cutted already around 15kHz.
You get the best quality by setting the sample rate to 96kHz (16 and 24 bit resolution are ~same in these cards) for recordings (for project?) and then when export the final mix just use SRC to CD quality (Audition do have quite good SRC quality but, if you use additional software for SRC (like Voxengo r8brain (free)), export the final mix using 96kHz and then execute SRC).
Something more on Creative ASIO -
http://forums.creative.com/creativel...essage.id=1726
jutapa
Message Edited by jutapa on 11-09-200602:43 PM

Similar Messages

Problems with Sampling rate in LabVIEW with 1/4 bridge strain gage

Hello,
I have a question. I have SCXI 1001 and am trying to read strain gages and thermocouples. In the slot 1 I have a 1122/1322 with thermocouples that works great. In slot 2 I have a 1121/1321 that needs help. I cannot figure out how to make a LabVIEW program to read the strain gage.
Is computer hardware a factor? I have a relatively old Dell, 1.7 ghz, 256 MB RAM, and all of my programs bog my machine down. My thermocouple program with 1 functioning channel takes almost 2 minutes to load.
Anyway, I program the DAQ assistant like I think it should be done, but I am having problems with the sampling rate. Everytime I run the program I get an error message saying that it could not get the recommended samples in time. I have had my delay time on my While Loop as low as .25 s and as high as 1.5 s. I have changed my sampling rate from 1 hz to 1000 hz.
I would really appreciate any and all help on this matter. I am still very new to LabVIEW. <I could not contain my excitement when my thermocouple program worked>
Thanks,
CDawgttu

Hi CDawgttu,
I think the best thing that we can do for the moment is to try and see what the maximum rate you can get on the 1121 is, when working on its own.
According to the DataSheet the 1122 is more likely to be what's slowing you down. There could also be some concerns with how the internal jumpers are set on the 1121, so you may want to make sure that the settings there match how you have configured your board in Measurement and Automation Explorer.
-You can set this up by right clicking on the SCXI module and adjusting the Properties. On the Jumpers Tab you should then make sure the values match what you've set internally (SCXI-1121 User Manual - Chapter 2)-
When you use just the 1121, see if that makes a difference in your overall application speed.
Finally, it may be easier to use an example program than the DAQ Assistant since you are using such an old machine. You can find Strain Gauge examples by opening LabVIEW and following this path:
Help > Find Examples > Browse > Hardware Input and Output > DAQmx > Analog Measurements > Strain > Cont Acq Strain Samples.vi
I hope some of these tips get you pointed down the right path.
Regards,
Otis
Training and Certification
Product Support Engineer
National Instruments

How to render audio with sample rate 48000hz using jmf

hi,
In my application i need to play the audio with jmf player with sampling rate 48000hz. but i found that jmf player plays the audio with sampling rate of 44100hz only.but my application needs to play the audio with sampling rate of 48000hz .please help me how to do this using jmf .
thanks in advance,

hi,
In my application i need to play the audio with jmf player with sampling rate 48000hz. but i found that jmf player plays the audio with sampling rate of 44100hz only.but my application needs to play the audio with sampling rate of 48000hz .please help me how to do this using jmf .
thanks in advance,

A problem with sample application modification

Hello,
I trying to build my application based on the Oracle HTML DB sample application (SA). I do have âordersâ and âorder_itemâ tables and forms â similarly as the SA dos. However I do have a problem with a fact that SAâs âenter order headerâ page only mandatory (not null) columns are obtaining values from a sequence (order_id) and popup key lov (p201_customer_id).
In my application, I do have additional mandatory column â due_date. I canât find a way to populate this column at the same time when process âprocess row of demo_ordersâ is executed. This processâ type is âautomatic row processing (dml)â and as I can see it only deals with one primary key and one secondary key.
On my own âenter order headerâ page I do have âp201_due_dateâ item displayed as âdate picker (dd/mm/yyyy)â so when I run my âenter order headerâ page I can select âcustomer nameâ similarly as on SA, and I do have additional âdue dateâ field where I can select a date from calendar-type popup window. However when I click on âcontinue >â I am getting error ORA-01400 because I donât know where to set that my due_date table column has to get populated from p201_due_date when I click on âcontinue >â button.
Is this doable using build in âautomatic row processing (dml)â process type or I have to write my own pl/sql anonymous block to handle this?
Thank you for your time.
DanielD

Does p201_due_date have a source type 'Database Column' ? It should in order for the fetch and DML processes to know about it.
Scott

Problem with exchange rate GBP/EUR

Hi everyone,
I have an issue regarding 2 documents that have been posted the same date (31.05.2011) but with different exchange rates.
The first doc is type ZP, posted with exchange rate GBP/EUR=0,88XXX (entry date: 26.05.2011, T.Code: F110)
The second one is type BK, posted with exchange rate GBP/EUR=0,87XXX (entry date: 01.06.2011, T.Code: FB01)
Both documents use the same exchange rate type EURX.
I checked in OBA7, there is no default value for the field "Exchange rate type for foreign currency docs" in both cases.
Do you have any idea how to solve this problem?
Thanks in advance,
Soumaya

Hi,
If the exchange rate is maintained in OB08 once a month, and in the meanwhile, if you are trying to post any transaction with foreign currency, the system would pick the last available/maintained rate in the table. For Eg: if the rate is maintained upto 30.04.2011 with 0,88XXX and if you have made a document with ZP with posting date as 31.05.11, the system would pick the rate of 30.04.2011 only as there is no rate maintained as on 31.05.11 on the date of transaction. And later, if you would have maintained the exchange rates for the entire month for the individual day of May, and when you processed a document type BK, the system would have picked the actual rate maintained in OB08 as on 31.05.11 ie 0,87XXX. Hence may be the difference.
Please check whether the above was the scenario with you (by referring to the changes option referred by the experts).
Regards
Hari

Is there any PXI oscilloscope card, with sampling rate 1Gs/s or higher

Hi all
In my test lab, I am using TDS684B oscilloscope. Is there any PXI card which can perform the same function as TDS684B? I searched the NI catalogue and they don�t have 1Gs/s sampling rate scope. Is there any other vendor for PXI and may be they might have. Please give me suggestion?
Many thanks.
Saw

I would say that Acqiris is worth a look. They have very good software support for their hardware. One can actually simulate hardware using they software while debugging at home or consulting. I have also used Gage and that product was pretty pathetic in terms of software support and hardware flexibility (it was 4yrs ago so perhaps that has changed)
Reinis Kanders

Problem with bit rate ?

Hi there,
Using FCP7.
After compressing a FCP project with Compressor and burning DVDSP with DVDSP, I realized that scenes containing objects or people in rapid movement where showing jerked images.
The slow motion scenes are fine.
I checked the following
settings for DVDSP burning: VBR two pass;
averageBit rate 4,0,
max rate 7,0
1) the self-contained QT that I started with is not showing this problem.
2) the m2v file obtained from compressor (I use preset setting for high quality compression) does not show this problem when I view it with MPEG streamclip
3) I tried to burn directly the QT file with Toast 10 …get same problem if not worse !.
settings for Toast
automatic re-encoding
average rate 4,0 Mbps
max bit rate 8,0 Mbps
MPEG-2
I guess my problem comes from the bit rate I used ?
I am now confused and I am not sure I understood the impact of the bit rate setting on the quality of the resulting DVD, and I believe that using a high bit rate in DVDSP might result in problems for some clients to play the DVD on their player ?
Could it be something else ?
could someone please give me advice ?
Many thanks in advance
Ivan

I can only think of two possibilities based on the info available:
1. Old DVD player (choking on the bitrate spike)
2. You need to set some compression markers around the scenes while in FCP. This would flag Compressor to pay extra attention to that area. After you output the new clip, I suggest you use the standard High Quality preset (in Compressor) for your program duration e.g., "Highest Quality 90 minute". Don't get creative with the encoding set-up. And ALWAYS used AC-3 audio.

Problem with Samples in EXS24

Hello Community,
i use the EXS24 as Drum-Sampler in Logic. I load some Drum Hits (.wav) into the exs24 and record my drums tracks.
But sometimes I have the following problem:
I load a .wav file into the exs24 but it sounds not like the original .wav sound in the finder preview or in quicktime - its totally blurred and u here a loud noise - so i cant use it for my music... i cant understand where the problem is, because i load it into the sample like always! Is a wavefile with 2,9 MB to big for this sampler??
Can somebody help me to get this to work?
Thanks

found a solution that worked for me with same problem, turned out the samples I was using were 32 bit.
Go to media>bin>add audio file
then add all the files to your bin. drag the files from bin into exs24.
hope this works for you as well!

Problem with sample file "SampleShapefileToJGeomFeature"

I download two zip files shape2sdojava.zip and sdo_java_040319.zip (http://www.oracle.com/technology/software/products/spatial/index.html) , because I want write java aplication that will work with shp files.
I tried to compile this example file "SampleShapefileToJGeomFeature.java", but i get error message:
Exception in thread "main" java.lang.Error: Unresolved compilation problems:
     DBFReaderJGeom cannot be resolved to a type
     DBFReaderJGeom cannot be resolved to a type
     The constructor ShapefileReaderJGeom(String) is undefined
     ShapefileFeatureJGeom cannot be resolved to a type
     ShapefileFeatureJGeom cannot be resolved to a type
     The method getShpFileType() is undefined for the type ShapefileReaderJGeom
     The method getMinMeasure() is undefined for the type ShapefileReaderJGeom
     The method getMaxMeasure() is undefined for the type ShapefileReaderJGeom
     The method getMinZ() is undefined for the type ShapefileReaderJGeom
     The method getMaxZ() is undefined for the type ShapefileReaderJGeom
     The method getMinX() is undefined for the type ShapefileReaderJGeom
     The method getMaxX() is undefined for the type ShapefileReaderJGeom
     The method getMinY() is undefined for the type ShapefileReaderJGeom
     The method getMaxY() is undefined for the type ShapefileReaderJGeom
     The method getShpDims(int, double) is undefined for the type ShapefileReaderJGeom
     at SampleShapefileToJGeomFeature.main(SampleShapefileToJGeomFeature.java:303)
So is this mean that this class DBFReaderJGeom does not exist in java.spatial.util?
Maybe this sample file is outdated, because class ShapefileFeatureJGeom is changed, now takes two parametars insted of one.
Message was edited by:
user547750

I found similar problem on this thread
Oracle Spatial Java API Problem
Is it possible for somebody to send me on mail these jar libraries from oracle database 10gR2?
And I dont know why this is not fixed yet on the oracle web site?
mail: konj_p @ yahoo.com
Thanks

Sun ejb tutorial compilation problem with sample code

I have been trying to follow the ejb tutorial off of Sun's web site. However, I get the following problem when I try to compile the sample code.
prompt>javac Demo.java
works fine
Prompt>javac DemoBean.java
works fine
Prompt>javac DemoHome.java
DemoHome.java:23: cannot resolve symbol
symbol : class Demo
location: interface ejb.demo.DemoHome
public Demo create() throws CreateException, RemoteException;
^
1 error
Prompt>
Can anyone help me out as I have tried several books which conveniently skip the part about compiling errors.
I noticed I don't have a CLASSPATH variable and then i created one with just '.' in it and that didn't work. any help would be appreciated as this is driving me crazy. Thanks.

try to change the order of the exception.
first RemoteException and then CreateException

The same problem with samples

Hello,
When i tried to run AssociationRules sample i've got the following error:
Completed MiningServer login
Formed bin boundary objects: census_2d_build
Created discretization tables for: census_2d_build
Received an exception in main: ORA-00905: missing keyword
ORA-06512: at "ODM.ODM_MINING_TRANSFORMATION", line 1613
ORA-06512: at line 1
java.sql.SQLException: ORA-00905: missing keyword
ORA-06512: at "ODM.ODM_MINING_TRANSFORMATION", line 1613
ORA-06512: at line 1
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:180)
at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:208)
at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:543)
at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1451)
at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:862)
at oracle.jdbc.driver.OracleStatement.executeNonQuery(OracleStatement.java:1839)
at oracle.jdbc.driver.OracleStatement.doExecuteOther(OracleStatement.java:1764)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2354)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:421)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:486)
at oracle.dmt.odm.transformation.Transformation.discretize(Transformation.java:607)
at Sample_Discretization.performCensusBinningFor2D(Sample_Discretization.java:182)
at Sample_AssociationRules.performDiscretization(Sample_AssociationRules.java:202)
at Sample_AssociationRules.main(Sample_AssociationRules.java:128)
Logging out of MiningServer.
Using Java debugger i can see that the problem in function odm_mining_transformation.discretize_2d(bla,bla,bla,bla,bla,bla,bla)
Thanks to Oracle wrapped packages i can't handle with this problem.
Is there any unwrapper or something to fix bad package?

Hi!
I think the problem is in "Sample_Discretization.performCensusBinningFor2D" that, with the original values of the "census_2d_build" table creates the discretization tables with float numbers.
So later, when it tries to discretize, it misinterprets the comma and causes the error:
"missing key value".
THE SOLUTION IS "AS SIMPLE" AS TO HAVE ONLY INTEGER VALUES in the lower_boundary and
upper_boundary columns of the discretization tables created.
Ok. Now the AssociationRules sample works fine but....
I still have another error in NaiveBayes, this is the layout:
Completed MiningServer login
Formed bin boundary objects: census_tx_build
Created discretization tables for: census_tx_build
Binned : census_tx_build. Output view:odm.census_build_binned
Attribute column name: ANAME
Persisted MiningFunctionSettings. Name: Sample_NB_MFS_1
Invoking NaiveBayes Model build.
Start time: Thu May 23 13:07:08 CEST 2002
Exc:ORA-29532: llamada Java terminada por una excepcisn Java no resuelta: oracle.jdbc.driver.OracleSQLException: ORA-20010: ODM_NAIVE_BAYES_MODEL.BUILD.CREATE_F2J: Model building failed with error (ORA-00998: debe proporcionar un nombre a esta expresion un alias de columna).
ORA-06512: en "ODM.ODM_MODEL_UTIL", linea 1517
ORA-06512: en "ODM.ODM_NAIVE_BAYES_MODEL", linea 245
ORA-06512: en "ODM.ODM_NAIVE_BAYES_MODEL", linea 1518
ORA-00998: debe proporcionar un nombre a esta expresion con un alias de columna
ORA-06512: en "ODM.ODM_NAIVE_BAYES_MODEL", linea 1052
ORA-06512: en linea 1
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:180)
     at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:208)
     at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:543)
     at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1451)
     at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:862)
     at oracle.jdbc.driver.OracleStatement.executeNonQuery(OracleStatement.java:1846)
     at oracle.jdbc.driver.OracleStatement.doExecuteOther(OracleStatement.java:1771)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2361)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:422)
     at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:487)
     at oracle.dmt.odm.model.MiningModel.build(MiningModel.java:161)
     at Sample_NaiveBayesBuild.buildNaiveBayesModel(Sample_NaiveBayesBuild.java:329)
     at Sample_NaiveBayesBuild.main(Sample_NaiveBayesBuild.java:136)
Have anyone any idea????
TIA,
Nuria.

Problem with Exchange rate field in MBEPOH in 4.7

Hi Experts,
I am working on data transfer of POs from 4.6 to 4.7 using the standard extract program RM06EEEX and then loading it using LSMW.
Problem is with the exchnage rate field(WKURS). Length of this field in MBEPOH is 9 characters in 4.6 and it is 1 character long in 4.7
So the data is getting truncated becuase of this mismatch. Is there any sap note avaliable to correct the field length MBEPOH-WKURS or any other way to pass correct data to the strucure.
Thanks in Advance ,
Harkamal

Hi,
Can you please check the valid date of that exchange rate and the goods receipt posting date?
Check in Purchase order also.
Regards,
Kumar

Problem with EXchange rate field in MBEPOH structure

Hi Experts,
I am working on data transfer of POs from 4.6 to 4.7 using the standard extract program RM06EEEX and then loading it using LSMW.
Problem is with the exchnage rate field(WKURS). Length of this field in MBEPOH is 9 characters in 4.6 and it is 1 character long in 4.7
So the data is getting truncated becuase of this mismatch. Is there any sap note avaliable to correct the field length MBEPOH-WKURS or any other way to pass correct data to the strucure in LSMW.
Thanks in Advance ,
Harkamal

Maybe you can use Idoc PORDCR1 (Create Purchase Order) as import method in LSMW.
Exchange rate field (WKURS) corresponds to field EXCH_RATE in E1BPMEPOHEADER segment.

Problems with samples in Workshop 8.1.3

I am Weblogic newbie.
When I used Weblogic Workshop 8.1.3, I found I can not build many ejb projects smoothly, even for some samples in workshop.
I guess the underlying reason is from the version I am using, workshop 8.1.3. Then I use Workshop 8.1.2 to build, it works.
Is there anyone who knew about this problem?
I am using Windows XP chinese version.
Thanks a lot in advance.
I can give you a build error info, as following,
WARNING: All files compiled. Running ejbc...
<2004-11-17 ÏÂÎç03Ê±42·Ö25Ãë CST>
<2004-11-17 ÏÂÎç03Ê±42·Ö25Ãë CST>
C:\DOCUME~1\brian.liu\LOCALS~1\Temp\wlw_ParEJB_build\com\motorola\police\Arrest_9ji946__WebLogic_CMP_RDBMS.java:1736: ';' expected
int oldState __WL_method_state;
^
C:\DOCUME~1\brian.liu\LOCALS~1\Temp\wlw_ParEJB_build\com\motorola\police\Person_s7rxmu__WebLogic_CMP_RDBMS.java:645: 'finally' without 'try'
} finally {
^
C:\DOCUME~1\brian.liu\LOCALS~1\Temp\wlw_ParEJB_build\com\motorola\police\Person_s7rxmu__WebLogic_CMP_RDBMS.java:565: 'try' without 'catch' or 'finally'
try {
^
C:\DOCUME~1\brian.liu\LOCALS~1\Temp\wlw_ParEJB_build\com\motorola\police\Person_s7rxmu__WebLogic_CMP_RDBMS.java:654: illegal start of expression
public void __WL_loadGroup0FromRS
^
C:\DOCUME~1\brian.liu\LOCALS~1\Temp\wlw_ParEJB_build\com\motorola\police\Person_s7rxmu__WebLogic_CMP_RDBMS.java:1871: ';' expected
^
C:\DOCUME~1\brian.liu\LOCALS~1\Temp\wlw_ParEJB_build\com\motorola\police\Person_s7rxmu__WebLogic_CMP_RDBMS.java:1878: '}' expected
^
6 errors
ERROR: ERROR: Error from ejbc: Compiler failed executable.exec
ERROR: ERROR: ejbc couldn't invoke compiler
BUILD FAILED
ERROR: ERROR: Error from ejbc: Compiler failed executable.exec
ERROR: ERROR: ejbc couldn't invoke compiler

Did you have a look in the temp build dir to see if there's really something wrong with the generated code (may be ejbc gets fooled by some character in a string literal or comment)? However you must have two separate installations for wls 8.1.2 and 8.1.3 so it's possible that classpath settings differ for the two.
Regards.
Antonio.

Problems with sample.basicftp

Hi,
I have just tested the samples from the Drive SDK.
The 'HelloWorld' example works fine.
I have then tested the 'sample.basicftp' and even I can connect to the FTP-Server no files or directories were listed.
I also can't write on the FTP-Drive, because it is write protected.
I have activated the debug messages in 'log4j.xml'.
This is a snippet from the output of the log:
ConnectHandler - -->In()
FtpClientHelper - connecting server: xxx.xxx.152.179
FtpClientHelper - connected
ConnectHandler - -->Out()
GetVolumeIconHandler - -->In()
GetVolumeIconHandler - -->Out()
GetConnectionDetailsHandler - -->In()
GetConnectionDetailsHandler - -->Out()
GetAssetsHandler - -->In()
GetAssetsHandler - -->In()
GetAssetsHandler - (assetId:null | parentId:/ | assetPath:/Contents)
GetAssetsHandler - (assetId:null | parentId:/ | assetPath:/mach_kernel)
GetAssetsHandler - Attempting to determine asset type: /Contents
GetAssetsHandler - Attempting to determine asset type: /mach_kernel
GetAssetsHandler - Asset not found
GetAssetsHandler - -->Out()
GetAssetsHandler - Asset not found
GetAssetsHandler - -->Out()
GetAssetsHandler - -->In()
GetAssetsHandler - (assetId:null | parentId:/ | assetPath:/autoexec.bat)
GetChildrenHandler - (assetId:/ | parentId:null | assetPath:/)
GetChildrenHandler - -->Out()
GetAssetsHandler - -->In()
GetAssetsHandler - (assetId:null | parentId:/ | assetPath:/.TemporaryItems)
GetAssetsHandler - -->Out()
GetAssetsHandler - -->In()
GetAssetsHandler - (assetId:null | parentId:/ | assetPath:/.Trashes)
GetAssetsHandler - -->Out()
DisconnectHandler - -->In()
FtpClientHelper - disconnected server: xxx.xxx.152.179
DisconnectHandler - -->Out()
I wonder about the asset names 'Contents', 'mach_kernel', 'autoexec.bat' and so on.
There are no files or directories on the remote or local system with these names.
So my questions is:
Is there an error in the sample, or is it me doing something wrong?

Hello,
we are using pure-ftp on our own ftp server.
But I also tested it with some other ftp servers (don't know which server type they are) with the same results.
I have no problems to connect with other ftp clients (Cyberduck, OS X built in ftp client).
My platform is Mac OS X 10.6.7.
I have added some additional debug to the function 'GetConnectionDetailsHandler'.
As I understand, the function sets the ftp server hostname and address.
public void execute(IProgressMonitor monitor,
GetConnectionDetailsRequest request, GetConnectionDetailsResponse response)
throws RemoteHandlerException
     LOGGER.debug("-->In()");
     FtpService service = this.getFtpService();
     try
          LOGGER.debug(service.getHostName().toString());
          LOGGER.debug(service.getHostAddress().toString());
DEBUG ConnectHandler - -->In()
DEBUG FtpClientHelper - connecting server: xxx.xxx.152.179
DEBUG FtpClientHelper - connected
DEBUG ConnectHandler - -->Out()
DEBUG GetVolumeIconHandler - -->In()
DEBUG GetVolumeIconHandler - -->Out()
DEBUG GetConnectionDetailsHandler - -->In()
DEBUG GetConnectionDetailsHandler - 192.168.30.208
DEBUG GetConnectionDetailsHandler - 192.168.30.208
DEBUG GetConnectionDetailsHandler - -->Out()
I wonder why 'service.getHostAddress()' returns my local IP Address.
That can't be right.

Problems with sample rate

Similar Messages

Maybe you are looking for