Problems with Samsung dvd and nforce drivers..

Something funny with my pc.
I just got everythng and insalled Wiin xp. Everything working..
both of my cd rom drives show up
1 lite-on cdr
1 samsung dvd 606f
then I install Nforce driver pack from Nvidia and everything works ... but
with Nforce ide controller idriver installed ....
Only one of my drives is detected.
1 lite-on CDR
no DVD
If i switch it back to windows standard IDE Primary and Secondary drivers it comes back..
Any thoughts.....
specks below

the Nforce drivers tend to be a bit picky about jumper settings ensure that your optiacal drive jumpers are set to master & slave. Nvidia doesnt work to well with cls. Alternatively you can just run wwith the MS ide drivers.

Similar Messages

Problems with dropped calls and no reception on Samsung Continuum

My mother and I both purchased a Samsung Continuum in late March 2011, and have experienced the same problems with the phone. The device drops at least 2-3 calls per day, often on the same conversation; we have not found that location or time of day makes a difference. The phone freezes up frequently, even if no apps are running in the background. We lose our 3G network reception frequently, and cannot access our texts, emails, or the internet. The screen saver kicks in even when we are actively dialing a number, or typing in a text message. The overall performance of the phone is also poor, and it is quite slow much of the time.
We have raised this issue several times with a representative at one of the Verizon stores, but he states that he can find no problem with the phone, and that these issues may not be covered under our insurance plan. None of my friends with non-Samsung phones are having the same problems with phone reception and performance. I am aggravated enough with these issues that I am considering reactivating my old Blackberry, which worked like a charm.
I am not upset that my phone has not been updated to Android 2.2. I just want the phone to perform as stated, and not fail at its primary function: making and receiving phone calls. I am not certain if these problems originate with the phone, Verizon, or Samsung, nor do I care. I just want to resolve these issues as soon as possible, or I will have to look at other alternatives.
Thank you.

If this doesn't work...now what??? I have a useless $400 plus piece of unreliable junk. My Motorola Razor was ions more reliable than this phone...very, very sad but true.
What carrier were you using with the Razor? AT&T? Same area?
Dave M.
MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
Creator of 'Mac611 - Mobile Mac Support' (designed exclusively for an iPhone/iPod touch)

I have a problem with indesign cs6 and my epson 3880 on mac

I have a problem with indesign cs6 and my epson 3880 on mac. I need an older version of indesign but do not have a serial number....any suggestions?

I see then I believe Kglad's advice is on track with starting with updating your printer drivers. I have also moved this discussion over to the InDesign forum as the Users in this forum likely have additional suggestions.
Also if you can please turn off your e-mail signature if you want to respond via e-mail. Your responses are going to a public forum where the information is accessible by anyone. I have edited your previous response to remove the signature.

Problems With Samsung SCD107 Camcorder

Hi, I have the Samsung SCD107 Camcorder and whenever I turn it on and enter camera mode all I see on the LCD screen and viewfinder is black. I have been told that the CCD sensor is broken. I was wondering if this is able to be repaired and how much i would cost to repair it.
-Thanks

Hi matt624,
The problem with your viewfinder and LCD screen could be caused by a faulty sensor, but the only way to really know is to have a technician look at your camcorder. I would first suggest having a digital imaging expert in a Best Buy® store look at the camcorder. If they determine that there is a defect in your camcorder the Geek Squad® precinct in the store should be able to have it sent out to a service center.
If there is a defect in the camcorder it can most likely be repaired, but the real question is will it be cost effective to repair or would you be better off putting that money towards the purchase of a new camcorder. The only real way to know would be to have a technician determine what is wrong, and get a quote on how much it would cost to repair. It would be impossible to guess the cost of the repair without a conclusive diagnosis.
Thanks for posting,
Allan
Community Connector
Best Buy® Corporate
Allan|Senior Social Media Specialist | Best Buy® Corporate
Private Message

Im having problem with the dvd quality, I'm using compressor to convert the video fils from apple prores to mpeg2 .It doesn't matter how long my video is even if its just 5 minutes I'm getting cut edges in the video , does anyone have any idea ?

Im having a problem with the dvd quality, I'm using compressor to convert the video fils from apple prores to mpeg2 .It doesn't matter how long my video is even if its just 5 minutes I'm getting cut edges/lines in the video specialy if i have titles it comes up really bad , I took the same video to a friend of mine who have PC and he uses Encore , did the encoding there and it was just fine no problems! BTW I tried using doferent setings in compressor from CBR and VBR I even pushed up the setings to 8 or 9 BR and still no luck !
does anyone have any idea ?
Thanks in advence ...

Let's focus attention on just the Sony. (What model and what resolution are you shooting?)
For now, I'll assume you're shooting 1080i.
Take a representaive clip into a new sequence. Add a title.
In your sequence, make sure field dominance is set to Upper.
Set render settings to Pro Res 422.
After rendering, export QT self contained.
Import into Compressor (I'm now referring to v3.5).
Select the 90 minute Best quality DVD preset.
Open frame controls and turn on (click the gear icon). Set Resize filter to Best.
Submit burn and check quality on TV.
Good luck.

Problem with copied DVDs--"DAMAGED TS FOLDER" (HELP or I shall go MAD!)

Hi folks--really, really hope someone can help me. This has got me beat. And I'm by no means sure it's a problem with my computer, but...
The facts:
1. I recently acquired a Panasonic DMR-ES20 DVD recorder, primarily to make DVD copies of a number of old and treasured videotapes. These are from broadcast, so copy protection isn't a factor.
2. I often use my Mac as a TV to watch DVDs and have never had the slightest problem with commercial DVDs.
3. I am (or was) using Roxio's Popcorn 2 program to make up backup copies of the DVDs I make.
4. I made about 20 DVDs without problem, and ALL work perfectly on the Imac, and ALL can be copied via Popcorn 2.
5. Then, SOMETHING CHANGED, I have no idea what--but now, each and every DVD I make with the Panasonic shows up on the Imac as follows:
"The TS folder appears to be damaged."
These disks will NOT play on the Imac and cannot be copied with Popcorn 2. They DO play on the Panasonic machine, however.
6. I have tried varying media, including high-quality Taiyo Yuden disks. That didn't help.
7. I have reset the recorder to original factory settings. That didn't help.
8. I have used a disk lens cleaner on the Imac. That didn't help.
9. I have spoken with Applecare and (God help me) Panasonic. Both pronounced themselves baffled.
10. As am I. As things stand, I've got a lot of more or less useless equipment. Ideas? Hints? Suggestions?
2 GZ PowerPC G5 Mac OS X (10.4.7)
2 GZ PowerPC G5 Mac OS X (10.4.7)
2 GZ PowerPC G5 Mac OS X (10.4.7)

The only time I have ever expierianced an issue like this is from doing extensive burning. The cause is from the storage of the cache files and some of the older TS folders even after you trashed them from your machine after you burned.
The only way I have been able to work around this is
First Repair Permissions as is submitted by Gulliver.
http://discussions.apple.com/thread.jspa?messageID=607640&#607640
I have also found that by running 3 freeware or shareware programs one right after the other and after the 3rd it will restart your computer all is well when I do it.
First run Macjanitor.
http://personalpages.tds.net/~brian_hill/downloads.html
Next run Cache Out X.
http://www.versiontracker.com/dyn/moreinfo/macosx/14850
And last but not least is ONYX.
take note when you run Cache out X and Onyx be careful to not delete your favorites in your browsers.
http://www.versiontracker.com/dyn/moreinfo/macosx/20070
A note of interest, I have had to do this after I have done a lot of copying to get rid of all the excesive junk that is left behind.
Give it a try.
Good Luck Don

Restore with install DVD and Time machine backup that excludes system

Hi, I need restore my PB G4.
I backed up my data using TM but excluding all system files. Is there a possibillity to reinstall the system with the DVD and then rebuild the individual accounts using Time machine?

Yes, you have several options: (In all cases Mac OS 10.5 Leopard is required as previous OS X versions can not work with Time Machine backups.)
*Full Restore Via Migration Assistant & Time Machine*
You can use the installation DVDs that came with your Mac and reinstall Leopard (Mac OS 10.5). During the installation process you will be asked if you would like to Migrate data over from your Time Machine backups. The advantage here is that you start with fresh system software. The disadvantage is that you may lose many of the personal preferences/settings that had been established with the previous system. But this may be only a minor inconvenience to reestablish these. Depending on whether you choose to migrate your applications over as well, you may be required to reinstall any 3rd-party software or standalone Apple programs. Don’t forget to run Software Update once the initial installation is complete to bring your system up to date. Using Disk Utility at this point to repair any permissions issues is advised as well.
*Full Restore Via Time Machine Only*
Alternatively, you can use the installation DVDs to do a full system restore. Insert the installation DVD. When the welcome window appears, go to the Utilities menu and select “Restore System From Backup…” and choose the drive that your Time Machine backups are on. Then select the date of the backup you would like to restore from. This will completely erase your internal drive and restore your system to a relatively same condition it was in on the date of the backup you choose. (See this article for a list of files that TM does not restore, http://shiftedbits.org/2007/10/31/time-machine-exclusions/) The advantage here is that you retain many of the personal preferences/settings that had been established with the previous system. Additionally, no further installation of 3rd-party software is required. The disadvantage is that BECAUSE you retain many of the personal preferences, settings, and system files that had been present with the previous system, you run the risk of reintroducing problems you experienced with the previous installation, including any issues that necessitated the OS reinstall in the first place. Using Disk Utility at this point to repair any permissions issues is advised as well.
*Full Backup After Restore*
Bear in mind that in all cases Time Machine will perform a full backup after a full restore. This is normal. Time Machine will resume incremental backups after the full backup has completed. To view previous backups, Control-click or right-click the Time Machine icon in your Dock or Option-click the Time Machine menu extra and Choose "Browse Other Time Machine Disks," then select your previous backup volume. You will enter Time Machine and be able to browse your previous back ups and restore files. (http://support.apple.com/kb/TS1338)
Hope this helps.

Problems with burned DVD in iDVD - Works in some players, not in others

Hi, I'm having a strange problem with a DVD I burned in iDVD.
I have a disc image that I made in iDVD and then burn the Audio_TS and Video_TS folders to a DVD.
I burned to a Memorex DVD+R.
The video pops up fine and plays on my computer after it burns, but if I eject the disc and try to re-insert it, the DVD preview says "Supported disc not found". It did this same thing when I tried it in my Macbook.
It works fine in my standard DVD player, but I also tried it on my Playstation 3 and it did not play.
A few things I am going to try is buring directly from iDVD instead of first making a disc image, and also using DVD-R, although I heard that DVD+R is generally a better format to use.
Someone also told me that DVD+R does not play on macs, which I question.
If anyone has any other suggestions or might know why this is happening, I would greatly appreciate it. It is an important project that needs to be done soon! Thanks.
Message was edited by: Nathan Edwards1

The disc image option is within iDVD: File > Save as Disc Image. If you switch to DVD map map mode you can drag your movie to a spot prior to the menu so that the movie plays automatically when put into the player. Under advanced, you can set the movie to loop.... otherwise I think it goes back to the menu when done playing. BTW, all DVDs MUST have a menu it is part of the DVD specification. It is just a matter of whether you see the menu. As far as exporting your project back to tape... you won't loose any quality and your audio, along with your video and any editing to each will export back to tape. However, a MP3 is not generally considered a higher quality file (although perhaps the recorder was closer to the source?). As a matter of fact, if you are editing your audio I strongly suggest using a file sampled at at least 16-bit/48Khz, AIFF (or WAV or anything lossless).
In regards to the slow burn speed: I agree that a slower burn speed is better than the fastest burn speed (due to error corrections ect). However, I would choose a middle of the road burn speed. If my choices are 4x, 6x, or 8x, I would choose 6x. If it is 2x, 4x, 6x, I would choose 4x. And yes, quality of blank media can effect the playback of a disc that played once just fine.
Mike

Problem with burning DVD's

I have Roxio Toast Titanium and I have a problem with burning DVD's. When I put a blank DVD-R in my superdrive, select the files and go to burn; the advanced recording options will not let me deselect the check in "close disk". It is shaded. But when I use a CD-RW I can and so far the Roxio help has...well has not been help at all. I mean why would I spend the money to buy a software package that lets me do the same thing as the basic OS-X disk utility would let me do? Drag a file, burn it and close the disk from any future use....
Sorry if this does not belong here, I did not see a area for general software questions way back in the main forum area not one here.
Rob

Donald,
Hi and thank you.
To give you more details on what I am trying to do; I am trying to burn in Mac & PC format. I am mainly trying to back up all my assorted college files (I am a college student), these files are lecture notes in Word with embedded audio recordings, standard Word documents such as essays, etc., spreadsheets, PDF documents, etc. The files I am attempting to burn should not be larger than 4.7 gb and Roxio has not given me a warning that it would be.
I am just frustrated that when I put in a DVD-R or -RW I only have one option, and that is to close out the disk when it is finished burning it. I have also gone to the recording tab, on the menue bar, to uncheck the "close disk" box after I put in a blank DVD and before I select files to burn. The option is shadded preventing me from even trying, which is not the case for a CD!
Thank you!
12 PowerBook G4 Mac OS X (10.4.1)

Satelite 1400-503 problem with a DVD+R

Hello,
I have a problem with my dvd - rom. Family of me have burned a dvd+R. Now can't i play it on my notebook. So i tested a dvd-R and this works well.
A friend of me tells me that i can change some configuration of something like that so i can play the both formats. Can someone help me with this???

Hi
I don't think this is a setting to be changed. The drive must support the + format.
This is not very common if the machine is not very very new. If You get this problem with the built-in drive of Your Sat1400-503 and it is not replaced by some unsupported one, then I am very sure that it does not support the DVD+R format.
BR
Tom

Toshiba sattelite pro ( SPM30 ) problem with black screen and white cursor

I have a toshiba SPM30 from a friend and I couldn't succed to resolve the problem with black screen and white cursor.I can enter in bios using F2 and I can use F12 but is not booting, I have some CD and DVD with Win Xp but it seeams that is not booting.I've traied to change the order in boot order: first CD/DVD and after HDD but still is not working...I saw that a HDD I can see details about it but at CD/DVD I can't see...I think that the CD/DVD is not working( but I can see the light and hear the sounds when I put a bootable CD or DVD)...Please, if someoane can help me......( byt the way I've traied to remove the bios battery and still is not working...)

Try f8 and try the repair your computer options
This explains advanced start up options:
http://windows.microsoft.com/en-us/windows/advanced-startup-options-including-safe-mode#1TC=windows-...
This explains start up repair:
http://windows.microsoft.com/en-us/windows/startup-repair-faq#1TC=windows-7
A system disc can be used for these repair options also, in your case if the DVD drive is not working you can use an external dvd drive if you have one.
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

T61 - problem with Vista x64 NVS 140M drivers

Hi!
I have problems with Vista x64 and NVS 140M drivers. Thing is that if I install them, everything will be slideshow, even the audio shutters quite bad and CPU is constantly over 45%. I have tried different driver versions but nothing has helped yet. Any ideas?
I wonder if anyone has the old 7.15.11.0129 driver and could send it to me? Maybe that would help.

Try the following test:
- Go to Vista Sound Control Panel to view the S/PDIF out properties.
- Click on the Supported Format tab page, select Dolby Digital and click Test.
Is the test OK?

Firefox 6.0.1 causes extreme problems with ATI Catalyst 10.x drivers on a Win7 x64 system. When I roll back to Firefox 6.0, no problems. Can this be resolved?

Firefox 6.0.1 causes extreme problems with ATI Catalyst 10.x drivers on a Win7 x64 system. Took me quite awhile to identify, but when I roll back to Firefox 6.0, no problems. Once Firefox recognizes this and reinstalls the 6.0.1 update then severe display driver problems occur causing very erratic display behavior and ultimately rendering the system inoperative. The problem appears to occur within a minute or two after Firefox has been opened and it occurs even if Firefox has been subsequently closed prior to the actual event taking place. I have attempted this 6 times just to ensure that the problem was associated with the 6.0.1 update.

On Mac OS, plugins are installed to a common location, usually ''' /Library/Internet Plugins''' for system-wide availability or to '''~/Library/Internet Plugins''' for a specific user. Ref: http://kb.mozillazine.org/Issues_related_to_plugins#Background
Does Java 1.6.0_31 work on Safari or another browser?
I also found the following, in case it helps:
*http://reviews.cnet.com/8301-13727_7-57414869-263/how-to-use-java-applets-in-os-x-after-java-2012-003-update/
*http://stackoverflow.com/questions/6411909/how-to-downgrade-jre-jdk-on-mac-osx

Problems with my DVD/CD-ROM Drive (MS-8216)

I have a BIGGGG problem with my DVD/CD-ROM Drive (MS-8216)
I was copying somethin in my comp, and the cd got BOOOM into pieces inside.
My warranty expired 1 month ago, so i clean it in the inside. After this it is like this :
- i can watch 700mb movies AVI format with no problems, but when i want to copy anything in my comp from the cd it always stops rotating at 6% of copiyng and BANG it stops and an error has acourde. Same with the dvd's. Please don't ask me about my comp config couse i know it has no problem with that. I left every thing like it was inside --- impecable, no wiress unplugged and i've upgraded the firmware also
What can it be. Thank you

if you can read the CD, but not copy from it, try this program:
Isobuster
It allows you to read with a much better accuracy than the generic windows driver.
However, i'm afraid your drive has been damaged in the explosion and this is only a work around, not a real solution.
The good point is that DVD burner are now cheap, but it is not much...

Problems with ListViews Drag and Drop

I'm surprised that there isn't an Active X control that can do this more
easily? Would
be curious to find out if there is - although we aren't really embracing the
use of
them within Forte because it locks you into the Microsoft arena.
---------------------- Forwarded by Peggy Lynn Adrian/AM/LLY on 02/03/98 01:33
PM ---------------------------
"Stokesbary, Michael" <[email protected]> on 02/03/98 12:19:52 PM
Please respond to "Stokesbary, Michael" <[email protected]>
To: "'[email protected]'" <[email protected]>
cc:
Subject: Problems with ListViews Drag and Drop
I am just curious as to other people's experiences with the ListView
widget when elements in it are set to be draggable. In particular, I am
currently trying to design an interface that looks a lot like Windows
Explorer where a TreeView resides on the left side of the window and a
ListView resides on the right side. Upon double clicking on the
ListView, if the current node that was clicked on was a folder, then the
TreeView expands this folder and the contents are then displayed in the
ListView, otherwise, it was a file and it is brought up in Microsoft
Word. All this works great if I don't have the elements in the ListView
widget set to be draggable. If they are set to be draggable, then I am
finding that the DoubleClick event seems to get registered twice along
with the ObjectDrop event. This is not good because if I double click
and the current node is a folder, then it will expand this folder in the
TreeView, display the contents in the ListView, grab the node that is
now displayed where that node used to be displayed and run the events
for that as well. What this means, is that if this is a file, then Word
is just launched and no big deal. Unfortunately, if this happens to be
another directory, then the previous directory is dropped into this
current directory and a recursive copy gets performed, giving me one
heck of a deep directory tree for that folder.
Has anybody else seen this, or am I the only lucky one to experience.
If need be, I do have this exported in a .pex file if anybody needs to
look at it more closely.
Thanks in advance.
Michael Stokesbary
Software Engineer
GTE Government Systems Corporation
tel: (650) 966-2975
e-mail: [email protected]

here is the required code....
private static class TreeDragGestureListener implements DragGestureListener {
     public void dragGestureRecognized(DragGestureEvent dragGestureEvent) {
     // Can only drag leafs
     JTree tree = (JTree) dragGestureEvent.getComponent();
     TreePath path = tree.getSelectionPath();
     if (path == null) {
          // Nothing selected, nothing to drag
          System.out.println("Nothing selected - beep");
          tree.getToolkit().beep();
     } else {
          DefaultMutableTreeNode selection = (DefaultMutableTreeNode) path
               .getLastPathComponent();
          if (selection.isLeaf()) {
          TransferableTreeNode node = new TransferableTreeNode(
               selection);
          dragGestureEvent.startDrag(DragSource.DefaultCopyDrop,
               node, new MyDragSourceListener());
          } else {
          System.out.println("Not a leaf - beep");
          tree.getToolkit().beep();
}

Problems with Samsung dvd and nforce drivers..

Similar Messages

Maybe you are looking for