Problems with SATA + KT880. Can't install windows.

I just bought a HD seagate sata 160gb, it works fine when i boot from the older (40gb 5400rpm) hd, but it won't do the same when i try from the new one. The windows setup program can install everything without any problem. But it always give me the same problem message when trying to enter on windows xp sp2. I pressed f6 during installation and used the newest sata/raid drivers and also i updated the bios to 2.0. Even after the bios update still had the same message form windows, it tells me that either my computer have a virus, or to remove any new storage controller devices and to do a chkdsk and to prevent damage it stopped. I did the chkdsk and had no problems, even did surface tests and had no problems also. So it leads me to think that there is some issue between the VT8237 and windows xp.
The message code: 0x0000007b, 0xfb94d529, 0x0000034 .
Thank you for your attention, and i'm sorry for my poor english...

How to troubleshoot "Stop 0x0000007B" error messages in Windows 2000/XP:
http://support.microsoft.com/kb/822052
poor PSU could be causing incorrect hard drive operation. make sure when you install Windows that only the drive you want to install Windows to is connected, and disconnect any others

Similar Messages

Problems with driver for network after installing windows.

Hi. I have recently installed Windows 7 on my mac pro (from ultimo 2012). I've used boot camp for the installation. However it did not install the driver for my network. How can I get the driver??
I hope there are someone who can help me.

Hello Becky,
I performed all the windows xp updates when I installed xp.
Our computer has labview 6.0 and 6.1 on it. I thought maybe they were causing a problem, so I tried uninstalling them. I downloaded msiblast and tried to remove Labview 6.0 and 6.1, but since they used to be on a network, and the university does not carry those programs anymore, they gave me errors. I was able to uninstall 7.0 and reinstall it, but it still gave me the same error as described in the original post.
I went into the registry and removed 6.0 and 6.1, but it still gives me the same error.
I need a way of removing 6.0 and 6.1 so that I can do a clean install of 7.0.
Thanks for your help,
Sergio
Attachments:
Serg_usf_Screen_Shot.doc ‏550 KB

Problem with switchable graphic cards after installing windows 10

Dear support, after installing windows 10 i lost option to switch my graphic cards. I already have installed new drivers for win10 64-bit. But it doesn't work. New drivers which i downloaded here: http://support.amd.com/en-us/download/desktop?os=Windows+10+-+64 doesn't support my graphic card. So i don't know what to do to get right drivers and be able to switch my graphic cards. Thanks for any help.

Hi there
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel. I understand that you installed Windows 10 and that switchable graphics is not working for you. I am happy to help. Unfortunately this is not something that AMD can help with, as it is a customized driver for your notebook. Did you do the Windows 10 installation as an upgrade and if so which operating system did you upgrade from? The existing HP drivers can be found here: HP Pavilion g6-1004ev Notebook PC but they are for Windows 7 or 8 depending on your choices. You could try those and install it using compatibility mode and see if that works. How to: Install and Update drivers in Windows 10 - answers.microsoft.com Let me know if that works for you.

Problem with screen brightness P500 after installing Windows 10

I Installed Win 10 yesterday. I can't change the display brightness since then. I have the latest driver for display adaptor ,dated July 2015 , that has been installed by windows 10. I tried to install the older driver for display adaptor from Lenovo site. But, Windows 10 does not accept that. I appreciate if you can help me!

I just installed a driver that solved my problem. Go to this link: http://answers.microsoft.com/en-us/windows/forum/windows_10-other_settings/any-windows-10-intel-core-i5-with-intel-hd-4000/d5b3284b-416c-41a3-8d87-f5766b3406d6?auth=1&rtAction=1440216456209 This is wonderful!

Having problems with Labview 7.0 after installing Windows XP Pro

After updating Windows XP Pro from Windows 98, my programs give me the following error:
The procedure entry point SUnMapLS_IP_EBP_12 could not be located in the dynamic link library KERNEL32.dll
I tried reinstalling Labview 7.0, but to no avail.

Hello Becky,
I performed all the windows xp updates when I installed xp.
Our computer has labview 6.0 and 6.1 on it. I thought maybe they were causing a problem, so I tried uninstalling them. I downloaded msiblast and tried to remove Labview 6.0 and 6.1, but since they used to be on a network, and the university does not carry those programs anymore, they gave me errors. I was able to uninstall 7.0 and reinstall it, but it still gave me the same error as described in the original post.
I went into the registry and removed 6.0 and 6.1, but it still gives me the same error.
I need a way of removing 6.0 and 6.1 so that I can do a clean install of 7.0.
Thanks for your help,
Sergio
Attachments:
Serg_usf_Screen_Shot.doc ‏550 KB

10.5 DVD won't Install. Problem with Driver. Can I instal it from ext. HD

My old iMac driver is e=getting older, after 6 years.
I wanted to re-install OSX 10.5 to make a clean install but the driver doesn't read the DVD (original one).
I heard I could install OSX from an external HD but not sure about the procedure.
Thanks!!!

No big deal, but it still is open. When posting questions on  Discussions, one should select if a question has been answered, so it is easier for others to find the solution, too. For this reason you can select Helpful and Solved.
See this short introduction for more info: http://discussions.apple.com/help.jspa#answers

Can't install Windows on my iMac with 16 Go !

Hello !
I bought an iMac i7 3.4 GHz SSD + 1TB drive and 4GB of ram. I replaced the 4 GB of RAM with 16 GB purchased from Crucial (4 strips 4GB with a priori the same features as the apple strips which are Samsung ...).
Everything is fine when I use Mac OS 10.6.8. No memory problem.
By cons, can not install Windows 7 32 bit or 64. An error occurs during the installation process : 0x80070570. After a little research on the forums, it is an error that may be due to a corrupted media - for example broken record - but this is not the case : my window installed itself perfectly on another computer.
The experience of other users evokes an error caused by memory. So I reinstalled my original bars of 2 GB. And there, no problem of installation. Windows is working properly. After reinstalling Windows, I replaced my memory with my 4 bars crucial,"and there is the drama." Windows becomes unstable : crashes, errors of registration,software installation... useless... I run a diagnostic memory test that went smoothly ! Obviously, the memory does not seem corrupted, especially since it works well on Mac OS 10.6.8.
So I decided to link the two strips origins (2 GB each) with two crucial strips (4 GBeach), a total of 12 GB of ram. And it works.
Do you have an explanation for this problem? Do you know how I can install Windows with my 16 GB crucial?
Thank you.

You make no mention of how your are attempting to install MS Windows so it's a little tough to help you. If you are using Boot Camp please use Boot Camp Assistant and if you still have problems please post in the Boot Camp forum. If you are using virtualization software (Fusion, Parallels etc.) then use the instructions that came with their software and if you still have difficulty please post in their forums.
Roger

Boot camp 4 can't install windows support drivers

Hi everyone,
I have the new imac 27" with thunderbolt and preinstalled Lion. They dont give you a CD.
I run Boot Camp assistant (version 4.0) and try to install windows on a purchased DVD Windows 7 x64 ( i am a recent convert to mac but still need some windows proggys.)
Ok so once I run the installation It asks me to download the windows support drivers... I do this but then it stops 3/4 through the process and comes up with an error "can't install windows support drivers".
Do any of you out know how to fix this???
Also If I dont use the option to update the software before installing and just select install windows 7 (second option) from a disc. It installs windows fine BUT it wont install any of the network, usb, camera, graphics and sound drivers. so basicaly I am blocked from the internet for windows to update the drivers. I also cant get the driver files from another computer as the mac in windows mode can recognised usb sticks as the drivers arent installed.
I need help urgently on this as it is doing my head
Thanks in advance.
Daniel!

Yes, but.
Open Network Preferences>Network>Advanced>Proxies and uncheck everything (try Passive Mode on, and off, but no auto Proxies)
And try again.

I can't install Windows 8.1 on my Imac with Mavericks using Bootcamp. Why?

I can't install Windows 8.1 on my Imac 27" with Mavericks using Bootcamp. Why? I first did all the software updates needed, downloaded the driver software to a 32Gb flash drive formatted as FAT32, fired up Bootcamp Assistant, inserted the Windows 8.1 Full version 64 bit installation DVD as requested, and got as far as partitioning (tried this at 82 Gb for the Windows partition), then the MAC rebooted but halted before getting to the login page. Then a black screen came up with the error message: 'non-system disk - Press any key to reboot'. I did this and nothing happened. I was forced to shut down forcibly then restart with my finger held down on the option key. Then a screen came up with two icons: the macintosh HD icon and the Windows DVD icon. I double-clicked on the Windows DVD icon and the MAC came up with another black screen and error message: 'CDBoot: Couldn't find BOOTMGR'. Had to shut down forcibly again and restart as before, this time ejecting the Windows DVD first. Then I repartitioned my MAC back to all OSX. What the **** do I do now? Applecare couldn't help me beyond this point. They said to contact Microsoft. I notice a lot of other MAC owners have had similar problems.
Please help? tagjsmith.

bootcamp does not currently support windows 8.1

Hi, I've been trying for days to download Windows support software via Bootcamp assistant, but it always failed with message 'Can't install Windows Support Software because it is not currently available from the Software update server.' Any advice welcome

Hi,
I've been trying for days to download Windows support software via Bootcamp assistant but it always fails with message 'Can't install windows software because it is not currently available from the software update server.'
Anyone else had problems or success with this?
Thanks in advance.

9thdoc wrote:
I'm getting a similar but distinct error message in snow leopard: Download could not continue. "The windows support software is not available" and have no original snow leopard instal disc with me.
Your issue is completely different. You are running Snow Leopard. There is no download for Windows Support software for Snow Leopard, hence the error you see. Snow Leopard Windows Support software is on the Snow Leopard installation disk.
You need the Snow Leopard installation disk or a replacement for it.

Need help I can't install windows 7 to my SATA HD

need help I can't install windows 7 to my SATA hard drive, when it gets to the part of selecting a drive partition to install windows it tells me my hardware does not support booting to this disk check that the disk's controller is enabled in the bios settings, I can't find any AHCI mode to switch to and RAID also did not solve my problem, bios version 786F1 v01.04

Hi,
You might get better assistance on the HP Enterprise Business Forum since you have a business class PC.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Can I install Windows 7 in 13-inch MacBook Pro (2.7 ghz Dual Core i-7) without problem

Can I install Windows 7 without any trouble in Macbook Pro (2.7 Ghz Dual Core I-7) ?

Since I always look at Windows as a problem, I would have to say no.
But if you must then you need to create a partition with Boot Camp in which to install your copy of Windows 7. The Core I7 doesn't support XP or Vista.
Allan

HELP! sata 3 ssd for hp mini 110-3118cl netbook, but i can't install windows xp on it.

Greetings, I recently bought an ocztech sata III ssd for my hp mini 110-3118cl but I can't install windows xp on it. I have the xp sp3 install version with SATA drivers pre-packed. When the setup goes through the first re-start, it stops, shuts down and re-starts. It also displayed an error at the beggining signaling something missing
SSd's are very expensive and i exclusively want XP, not 7. Any help?
hp mini 110-3118cl
windows xp 32-bit

Hi:
It is possible that the NM10 ACHI drivers are not part of that package though.
Please read this guide for slipstreaming drivers into a copy of your installation disk and see if that works.
http://www.mediafire.com/?z41dc9tyx4jyyys
Paul

How can I install Windows 8.1 Enterprise on my Macbook Pro With BootCamp?

How Can I Install Windows 8.1 Enterprise on my MacBook Pro?

Hi Armin.S,
I apologize, I'm a bit unclear on the exact nature of your question. If you are asking about the system requirements for running various versions of Windows under Bootcamp, or just more generally how to set up Bootcamp on your Mac, you may find the following articles/pages helpful:
Boot Camp: System requirements for Microsoft Windows operating systems
http://support.apple.com/kb/HT5634
Mac Basics: Using Windows on your Mac with Boot Camp
http://support.apple.com/kb/HT1461
Apple - Boot Camp Support
https://www.apple.com/support/bootcamp/
Regards,
- Brenden

How can I install Windows 8.1 using a USB Pen Drive in Late 2011 Macbook Pro with DVD R/W given.

How can I install Windows 8.1 using a USB Pen Drive in Late 2011 Macbook Pro with DVD R/W given.
I have Boot Camp 5.1.2 (497) and there is no option for installing using USB. I have downloaded an image of Windows 8.1 already.
I can't install using DVD R/W because it's not working.
Please help me.
Thank you.

unlocked by myself
thanks

Problems with SATA + KT880. Can't install windows.

Similar Messages

Maybe you are looking for