Problems with saving after Migration on ApEx 2.2

Hi,
we migrated from HTMLDB 2.0 to ApEx 2.2.
Now our end-users have problems.
They want to save their changes and after pressing the change button an empty page appears.
So they go back with the internet explorer back-button and press the save button again. Now the changes are saved in the database.
Does anybody have the same problem?
Is there a solution to fix this problem?
Thank you in advance
Ulrike

Yes thank you very much. This is the solution.
But it's a pitty that we have to change the CSV endcoding option for all our applications after migration manually.
Kind regards Ulrike

Similar Messages

Problem in Themes after Migrating from APEX 4.0 to 4.2

Dear Friends,
Recently we migrated from APEX 4.0 to 4.2. There were no errors during migration. But after migration we observed that any application with Simple Red (Theme No.1) and Scarlet (Theme 21) stopped working properly. i.e. Template button Red will not perform any task. Even changed the template of the button doesn't work.
Can any one suggest steps to solve the problem?
Thanks in Advance.
Krunal

Hi Prabodh,
This is the error i am getting
Timestamp: 11/30/2012 5:03:02 PM
Error: TypeError: ((f.event.special[r.origType] || {}).handle || r.handler).apply is not a function
Source File: http://testserver:8000/i/libraries/apex/minified/desktop_all.min.js?v=4.2.0.00.27
Line: 3
No i didn't modify any template.

Problem with rules after migration

After migration of some mailboxes from Exchange 2007 to 2010 we have a problem managing rules. When trying to create or look at rules from OWA we get an Mapi error (See below). Also, When checking the problem user rules from Exchange Management
Console "get-inboxrule -mailbox <User>", it fails with a Doctor Watson error (also below) Witch is similar to the one from OWA.
Any help would be much appreciated.
Mapi Error:
MapiExceptionNotFound: Unable to query table rows. (hr=0x8004010f, ec=-2147221233) Diagnostic context: Lid: 55847 EMSMDBPOOL.EcPoolSessionDoRpc called [length=104] Lid: 43559 EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=1366][latency=15] Lid: 23226 --- ROP Parse Start --- Lid: 27962 ROP: ropGetRulesTable [63] Lid: 27962 ROP: ropSetColumns [18] Lid: 27962 ROP: ropQueryRows [21] Lid: 31418 --- ROP Parse Done --- Lid: 55847 EMSMDBPOOL.EcPoolSessionDoRpc called [length=53] Lid: 43559 EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=168][latency=0] Lid: 23226 --- ROP Parse Start --- Lid: 27962 ROP: ropLtidFromId [67] Lid: 17082 ROP Error: 0x8004010F Lid: 17505 Lid: 21921 StoreEc: 0x8004010F Lid: 27962 ROP: ropExtendedError [250] Lid: 1494 ---- Remote Context Beg ---- Lid: 26426 ROP: ropLtidFromId [67] Lid: 43747 dwParam: 0x5 Lid: 55653 StoreEc: 0x8004010F Lid: 1750 ---- Remote Context End ---- Lid: 26849 Lid: 21817 ROP Failure: 0x8004010F Lid: 30894 Lid: 24750 StoreEc: 0x8004010F Lid: 29358 Lid: 27950 StoreEc: 0x8004010F Lid: 32190 Lid: 21950 StoreEc: 0x8004010F Lid: 27070 Lid: 22974 StoreEc: 0x8004010F Lid: 18686 Lid: 1136 StoreEc: 0x8004010F Lid: 24318 Lid: 32510 StoreEc: 0x8004010F
Doctor Watson:
WARNING: An unexpected error has occurred and a Watson dump is being generated: MapiExceptionNotFound: Unable to query
table rows. (hr=0x8004010f, ec=-2147221233)
Diagnostic context:
Lid: 55847 EMSMDBPOOL.EcPoolSessionDoRpc called [length=104]
Lid: 43559 EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=1366][latency=15]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropGetRulesTable [63]
Lid: 27962 ROP: ropSetColumns [18]
Lid: 27962 ROP: ropQueryRows [21]
Lid: 31418 --- ROP Parse Done ---
Lid: 55847 EMSMDBPOOL.EcPoolSessionDoRpc called [length=53]
Lid: 43559 EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=168][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropLtidFromId [67]
Lid: 17082 ROP Error: 0x8004010F
Lid: 17505
Lid: 21921 StoreEc: 0x8004010F
Lid: 27962 ROP: ropExtendedError [250]
Lid: 1494 ---- Remote Context Beg ----
Lid: 26426 ROP: ropLtidFromId [67]
Lid: 43747 dwParam: 0x5
Lid: 55653 StoreEc: 0x8004010F
Lid: 1750 ---- Remote Context End ----
Lid: 26849
Lid: 21817 ROP Failure: 0x8004010F
Lid: 30894
Lid: 24750 StoreEc: 0x8004010F
Lid: 29358
Lid: 27950 StoreEc: 0x8004010F
Lid: 32190
Lid: 21950 StoreEc: 0x8004010F
Lid: 27070
Lid: 22974 StoreEc: 0x8004010F
Lid: 18686
Lid: 1136 StoreEc: 0x8004010F
Lid: 24318
Lid: 32510 StoreEc: 0x8004010F
MapiExceptionNotFound: Unable to query table rows. (hr=0x8004010f, ec=-2147221233)
Diagnostic context:
Lid: 55847 EMSMDBPOOL.EcPoolSessionDoRpc called [length=104]
Lid: 43559 EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=1366][latency=15]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropGetRulesTable [63]
Lid: 27962 ROP: ropSetColumns [18]
Lid: 27962 ROP: ropQueryRows [21]
Lid: 31418 --- ROP Parse Done ---
Lid: 55847 EMSMDBPOOL.EcPoolSessionDoRpc called [length=53]
Lid: 43559 EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=168][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropLtidFromId [67]
Lid: 17082 ROP Error: 0x8004010F
Lid: 17505
Lid: 21921 StoreEc: 0x8004010F
Lid: 27962 ROP: ropExtendedError [250]
Lid: 1494 ---- Remote Context Beg ----
Lid: 26426 ROP: ropLtidFromId [67]
Lid: 43747 dwParam: 0x5
Lid: 55653 StoreEc: 0x8004010F
Lid: 1750 ---- Remote Context End ----
Lid: 26849
Lid: 21817 ROP Failure: 0x8004010F
Lid: 30894
Lid: 24750 StoreEc: 0x8004010F
Lid: 29358
Lid: 27950 StoreEc: 0x8004010F
Lid: 32190
Lid: 21950 StoreEc: 0x8004010F
Lid: 27070
Lid: 22974 StoreEc: 0x8004010F
Lid: 18686
Lid: 1136 StoreEc: 0x8004010F
Lid: 24318
Lid: 32510 StoreEc: 0x8004010F
+ CategoryInfo : NotSpecified: (:) [Get-InboxRule], MapiExceptionNotFound
+ FullyQualifiedErrorId : Microsoft.Mapi.MapiExceptionNotFound,Microsoft.Exchange.Management.RecipientTasks.GetInb
oxRule
-FireLite

Hi,FireLite,
What kind of the migration?
If it was cross forest or involved PST files then rules rarely come across correctly and should be recreated.
If it was simply install Exchange 2010 and use move mailbox, then rules should have moved with the mailbox.And please provide more information like below:
1)Does this rule problem happen to all moved mailboxes or just part of them?
2)Would you please verify that you have successfully moved these problem mailbox?
3)Can you manage the rule in outlook for them?Have you tried to create a new rule to see if it works for these mailbox in OWA or Outlook?
Please try to move the mailbox back to Exchange 2007,then move it to another mailstore,after that migrate it again to Exchange 2010 to see if it works.
And here are some resolved cases with similar error for your reference.
http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/3c795b8f-0b60-4346-b8f1-eb8c4f9c9cb0
http://social.technet.microsoft.com/Forums/en/exchangesvradminlegacy/thread/3cf2360f-0a4c-4c7e-87c9-6726e3dc34fd
Regards,
Sharon
Sharon Shen
TechNet Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question.

Problem with printing after migrating from 3.5 to 4.1

Hello everyone,
I'm currently working on an application that was recently migrated (by someone else) from Flex 3.5 to Flex 4.1 and I discovered the printing doesn't work properly anymore. So I tried to find out what the problem was and after many tries, I came to the conclusion that the problem was within the following line:
printJob.addObject(myPrintView,FlexPrintJobScaleType.MATCH_WIDTH);
(Of course "myPrintView" is not the real name used in the app but that's not important)
I searched on the Internet and this line is supposed to work in 4.1, isn't it? However, the printed version cuts my PrintAdvancedDataGrid approximately in half. I tried to change the width property from myPrintView but the grid is still cut at the same place, its cells are just distorted.
FYI, you can find a part of the code right here:
var printJob:FlexPrintJob = new FlexPrintJob();
 if (printJob.start()) {
 //A lot of code to build the print view
myPrintView.width=1280;
printJob.addObject(myPrintView,FlexPrintJobScaleType.MATCH_WIDTH);
printJob.send();
myPanel.removeChild(myPrintView);
Any help would be appreciated.
Regards,
Gudril

While looking for a solution on the Internet I found some people having troubles because of the structure of their AdvancedDataGrid. My problem doesn't come from any example I've seen but maybe it's still linked to that, so here's an AdvancedDataGrid that's being printed in my app:
 <mx:PrintAdvancedDataGrid dataProvider="{dataRayon}" sortExpertMode="true" id="dataGridRayon" width="100%" itemClick="dispatchEvent(new KpiEvent(DATAGRID_RAYON_CLICK,event));" itemDoubleClick="dispatchEvent(new KpiEvent(DATAGRID_RAYON_CLICK,event));" creationComplete="resizeGridRayon();" >
 <mx:columns>
 <mx:AdvancedDataGridColumn id="rownumRayon" width="25" sortable="false" labelFunction="getRowNumRayon" fontWeight="bold"/>
 <mx:AdvancedDataGridColumn id="rayonCoRgrp" textAlign="center" width="75" headerText="{resourceManager.getString('rentabilitePanel', 'CODE')}" dataField="co_rgrp_produits" />
 <mx:AdvancedDataGridColumn textAlign="left" width="240" headerText="{resourceManager.getString('rentabilitePanel', 'SOUS_SECTEURS')}" dataField="libelle" id="hTDataGridRayon" />
 <mx:AdvancedDataGridColumn id="rayonMeVenteHt" textAlign="right" width="100" headerText="{resourceManager.getString('rentabilitePanel', 'MONTANT_VENTE_HT')}" dataField="meVenteHt" formatter="{currencyFormatter}" sortCompareFunction="{function(obj1:Object, obj2:Object):int{return mySortFunc(obj1, obj2, 'meVenteHt');}}" />
 <mx:AdvancedDataGridColumn id="rayonMargeAvtDem" textAlign="right" width="75" headerText="{resourceManager.getString('rentabilitePanel', 'MARGE_AVT_DEM')}" dataField="margeAvtDem" formatter="{currencyFormatter}" sortCompareFunction="{function(obj1:Object, obj2:Object):int{return mySortFunc(obj1, obj2, 'margeAvtDem');}}" />
 <mx:AdvancedDataGridColumn id="rayonPMargeAvtDem" textAlign="right" width="80" headerText="{resourceManager.getString('rentabilitePanel', 'POUR_MARGE_AVT_DEM')}" dataField="margeAvtDemP" formatter="{pourcentageFormatterFloat}" sortCompareFunction="{function(obj1:Object, obj2:Object):int{return mySortFunc(obj1, obj2, 'margeAvtDemP');}}" />
 <mx:AdvancedDataGridColumn id="rayonDemarqueHt" textAlign="right" width="100" headerText="{resourceManager.getString('rentabilitePanel', 'DEMARQUE_HT')}" dataField="demarque" formatter="{currencyFormatterFloat1Dec}" sortCompareFunction="{function(obj1:Object, obj2:Object):int{return mySortFunc(obj1, obj2, 'demarque');}}" />
 <mx:AdvancedDataGridColumn id="rayonPDemarqueHt" textAlign="right" width="85" headerText="{resourceManager.getString('rentabilitePanel', 'POUR_DEMARQUE_HT')}" dataField="demarqueP" formatter="{pourcentageFormatterFloat}" sortCompareFunction="{function(obj1:Object, obj2:Object):int{return mySortFunc(obj1, obj2, 'demarqueP');}}" />
 <mx:AdvancedDataGridColumn id="rayonMargeAprDem" textAlign="right" width="100" headerText="{resourceManager.getString('rentabilitePanel', 'MARGE_APR_DEM')}" dataField="margeAprDem" formatter="{currencyFormatter}" sortCompareFunction="{function(obj1:Object, obj2:Object):int{return mySortFunc(obj1, obj2, 'margeAprDem');}}" />
 <mx:AdvancedDataGridColumn id="rayonPMargeAprDem" textAlign="right" width="115" headerText="{resourceManager.getString('rentabilitePanel', 'POUR_MARGE_APR_DEM')}" dataField="margeAprDemP" formatter="{pourcentageFormatterFloat}" sortCompareFunction="{function(obj1:Object, obj2:Object):int{return mySortFunc(obj1, obj2, 'margeAprDemP');}}" />
 </mx:columns>
 </mx:PrintAdvancedDataGrid>
I also realised I wasn't very clear on the outcome of my doPrint() function. When I said the grid was cut in half, I was talking about half the columns not showing on the printed version, not half the rows. Actually even a column being cut in half. I hope these precisions made my problem a bit clearer and somebody will be able to help me in any way (even just hints).
Thanks for your help.
Regards,
Gudril

Problem with servlet after migrating from OC4J to WebLogic 10.3

I come across a problem when I was migrating from jDev 11g TP4 to production version in that step also server got changed from OC4J to webLogic.
I am running java http servlet along other jspx pages. When everything was on OC4J there was no problem whit security on this servlet ( servlet was under same authorization automatically, and I was able to create new application module on this servlet by createRootApplicationModule
) but when I changed to WebLogic 10.3 I come across a numerous problems. First one is solved i managed to put the servlet under same authorization as jspx pages by
*<servlet>*
*<servlet-name>report</servlet-name>*
*<servlet-class>path.to.class</servlet-class>*
*<security-role-ref>*
*<role-name>name</role-name>*
*<role-link>valid-users</role-link>*
*</security-role-ref>*
*</servlet>*
but when I trying to create new application module I get JBO-30003 error which is Caused by:
oracle.adf.share.security.ADFSecurityAuthenticationException: JAAS login error.
Invalid null input: name
Has anybody any idea what I am doing wrong?
Thank you for your help, Rok Kogov&scaron;ek

for example:
web.xml
<security-role>
<role-name>yourrole</role-name>
</security-role>
weblogic.xml
<security-role-assignment>
<role-name>yourrole</role-name>
<principal-name>wlsuser</principal-name > 
</security-role-assignment>

Problem with Collections after Upgrade to Apex 4.02

Hi,
We are using oracle 10g with Apex 4.02.
I installed Jari's application for data import from excel.
http://dbswh.webhop.net/apex/f?p=BLOG:READ:0::::ARTICLE:126300346812330
It is working fine in our test environment but in production environment it is showing no data when I press the submit button. Am I missing some user privillege? Any help?
Thanks,
Zahid

I have a HTML page with a browse file item. I select my csv file and press the upload button. The button submits the page and executes the following procedure.
BEGIN
DECLARE
 v_blob_data BLOB;
 v_blob_len NUMBER;
 v_position NUMBER;
 v_raw_chunk RAW(10000);
 v_char CHAR(1);
 c_chunk_len number := 1;
 v_line VARCHAR2 (32767) := NULL;
 v_data_array wwv_flow_global.vc_arr2;
 v_rows number;
 v_sr_no number := 1;
 v_rows_loaded NUMBER;
 BEGIN
 -- Read data from wwv_flow_files
 select blob_content into v_blob_data
 from wwv_flow_files
 where last_updated = (select max(last_updated) from wwv_flow_files where UPDATED_BY = :APP_USER)
 and id = (select max(id) from wwv_flow_files where updated_by = :APP_USER);
 v_blob_len := dbms_lob.getlength(v_blob_data);
 v_position := 1;
 -- Read and convert binary to char
 WHILE ( v_position <= v_blob_len ) LOOP
 v_raw_chunk := dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
 v_char := chr(hex_to_decimal(rawtohex(v_raw_chunk)));
 v_line := v_line || v_char;
 v_position := v_position + c_chunk_len;
 -- When a whole line is retrieved 
 IF v_char = CHR(10) THEN
 -- Convert comma to : to use wwv_flow_utilities 
 v_line := REPLACE (v_line, ',', ':');
 -- Convert each column separated by : into array of data 
 v_data_array := wwv_flow_utilities.string_to_table (v_line);
 --DELETE OLD DATA
 -- Insert data into target table 
 IF v_sr_no >1 THEN
 EXECUTE IMMEDIATE 'INSERT INTO EMP(EMPNO, ENAME, SAL, COMM, DEPTNO)
 VALUES (:1, :2, :3, :4, :5)'
 USING
 -- v_sr_no,
 v_data_array(1),
 v_data_array(2),
 v_data_array(3),
 v_data_array(4),
 v_data_array(5);
 END IF;
 -- Clear out
 v_line := NULL;
 v_sr_no := v_sr_no + 1;
 END IF;
 END LOOP;
END;
COMMIT;
END;Pressing button gives me "ORA-01403: no data found" error message. This has been working before we upgraded from Apex 3.2 to Apex 4.02.
I hope that the above detail may give you better idea of the problem.
Thanks.

Problem with Spreadsheet after migration

So to put it as simple as possible, I have migrated to a new MacBook and old my old Mac, I was using MS Office to work on my spreadsheet. Now when I open the file with Numbers, it won't show the entire document. For example, the spreadsheet is over 200 pages but i am only able to see the first 20 or so.

Priesh,
With such a large spreadsheet can you continue to work on it in Excel?
Numbers is great but probably not designed for such monster spreadsheets.
If you must work in Numbers, you could try breaking the Excel spreadsheet into logical subsets of your data and import each of those subsets into separate Numbers tables.
Numbers is much more suited to smaller tables for specific purposes whereas in Excel you often have things in one big spreadsheet.
SG

Problem with PK after migration from Access

I converted an Access 2000 db to Oracle 8.1.7, and now Access is having trouble recognizing the correct primary key for one table.
The actual primary key on the table is Column A, which is a number (an autonumber, in fact). On the Oracle side, this shows up as the PK. But when I go back to Access and link the table, a different column is identified as the PK! A TEXT column, no less! And I can't get Access to recognize the correct column as the PK, which is keeping me from loading data to that table. Has anyone else seen this happen? And maybe can offer some advice?
I already dropped/rebuilt the PK on the Oracle side, that didn't help. And I've re-converted the database again, just to make sure there were no problems in the conversion.

Found a workaround. I'll share it, in case anyone else experiences this:
The PK and index looked FINE on the Oracle side, but what I had to do was this: I had to drop the unique index on the column that Access thought was the PK (I'll call it Column B). Then I dropped the PK and index on the actual PK (Column A). Then I re-created the PK and index on Column A. Voila! Access now knew that column A was the PK. Then I was able to re-create the unique index on column B, and Access didn't lose its way.

Problem with Java after Software Update to 10.5.7

Hi,
I am facing problem with Java after having run Software upgrades.
Here is the whole story. I recently moved to iMac 10.5.6 from PowerPc 10.4. On this new machine I was having problem running a 3rd party application, which requires JVM. As this application worked well on Tiger, I decided to upgrade JVM on my iMAC using Software Upgrade(was I insane!!). As I like my systems to be updated (as with linux on my personal machine) I clicked "install all". As a result I have the following upgrades run on my machine:
2009-05-20 13:12:01 +0200: Installed "Mac OS X Update Combined" (10.5.7)
2009-05-20 13:12:10 +0200: Installed "Remote Desktop Client Update" (3.2.2)
2009-05-20 13:12:26 +0200: Installed "Java For Mac OS X 10.5 Update 2" (1.0)
2009-05-20 13:58:36 +0200: Installed "Java for Mac OS X 10.5 Update 3" (1.0)
2009-05-20 13:58:44 +0200: Installed "AirPort Utility Software Update 2009-001" (5.4.1)
2009-05-20 13:59:07 +0200: Installed "QuickTime" (7.6)
2009-05-20 13:59:22 +0200: Installed "iPhoto Update" (7.1.5)
2009-05-20 13:59:28 +0200: Installed "iLife Support" (9.0.2)
2009-05-20 13:59:38 +0200: Installed "iDVD Update" (7.0.3)
2009-05-20 13:59:58 +0200: Installed "iTunes" (8.1.1)
But now, simply running $java on the prompt hangs, i.e. it takes no action.
$ which java
/usr/bin/java
$ ls -ltr /usr/bin/java
May 20 15:09 /usr/bin/java -> /System/Library/Frameworks/JavaVM.framework/Versions/Current/Commands/java
$java (no response)
Here is the output of $ top
PID COMMAND %CPU TIME #TH #PRTS #MREGS RPRVT RSHRD RSIZE VSIZE
703 java 98.8% 0:38.54 3 110 72 480K 184K 1964K 40M
Any clues?
Details of JavaVM on my machine
$ pwd
/System/Library/Frameworks/JavaVM.framework/Versions
$ ls -ltr
total 56
drwxr-xr-x 3 root wheel 102 Dec 2 2007 1.3.1
lrwxr-xr-x 1 root wheel 3 Aug 31 2008 1.4.1 -> 1.4
drwxr-xr-x 8 root wheel 272 Aug 31 2008 1.4.2
drwxr-xr-x 8 root wheel 272 Aug 31 2008 1.5.0
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.3 -> 1.3.1
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.4 -> 1.4.2
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.5 -> 1.5.0
drwxr-xr-x 8 root wheel 272 May 20 13:12 1.6.0
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.6 -> 1.6.0
drwxr-xr-x 8 root wheel 272 May 20 13:12 A
lrwxr-xr-x 1 root wheel 1 May 20 14:57 Current -> A
lrwxr-xr-x 1 root wheel 3 May 20 14:59 CurrentJDK -> 1.5
Any suggestions? Is there a cleaner approach to uninstall Java on Mac then a simpl "move to thrash"!
cheers

Hi,
I am facing problem with Java after having run Software upgrades.
Here is the whole story. I recently moved to iMac 10.5.6 from PowerPc 10.4. On this new machine I was having problem running a 3rd party application, which requires JVM. As this application worked well on Tiger, I decided to upgrade JVM on my iMAC using Software Upgrade(was I insane!!). As I like my systems to be updated (as with linux on my personal machine) I clicked "install all". As a result I have the following upgrades run on my machine:
2009-05-20 13:12:01 +0200: Installed "Mac OS X Update Combined" (10.5.7)
2009-05-20 13:12:10 +0200: Installed "Remote Desktop Client Update" (3.2.2)
2009-05-20 13:12:26 +0200: Installed "Java For Mac OS X 10.5 Update 2" (1.0)
2009-05-20 13:58:36 +0200: Installed "Java for Mac OS X 10.5 Update 3" (1.0)
2009-05-20 13:58:44 +0200: Installed "AirPort Utility Software Update 2009-001" (5.4.1)
2009-05-20 13:59:07 +0200: Installed "QuickTime" (7.6)
2009-05-20 13:59:22 +0200: Installed "iPhoto Update" (7.1.5)
2009-05-20 13:59:28 +0200: Installed "iLife Support" (9.0.2)
2009-05-20 13:59:38 +0200: Installed "iDVD Update" (7.0.3)
2009-05-20 13:59:58 +0200: Installed "iTunes" (8.1.1)
But now, simply running $java on the prompt hangs, i.e. it takes no action.
$ which java
/usr/bin/java
$ ls -ltr /usr/bin/java
May 20 15:09 /usr/bin/java -> /System/Library/Frameworks/JavaVM.framework/Versions/Current/Commands/java
$java (no response)
Here is the output of $ top
PID COMMAND %CPU TIME #TH #PRTS #MREGS RPRVT RSHRD RSIZE VSIZE
703 java 98.8% 0:38.54 3 110 72 480K 184K 1964K 40M
Any clues?
Details of JavaVM on my machine
$ pwd
/System/Library/Frameworks/JavaVM.framework/Versions
$ ls -ltr
total 56
drwxr-xr-x 3 root wheel 102 Dec 2 2007 1.3.1
lrwxr-xr-x 1 root wheel 3 Aug 31 2008 1.4.1 -> 1.4
drwxr-xr-x 8 root wheel 272 Aug 31 2008 1.4.2
drwxr-xr-x 8 root wheel 272 Aug 31 2008 1.5.0
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.3 -> 1.3.1
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.4 -> 1.4.2
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.5 -> 1.5.0
drwxr-xr-x 8 root wheel 272 May 20 13:12 1.6.0
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.6 -> 1.6.0
drwxr-xr-x 8 root wheel 272 May 20 13:12 A
lrwxr-xr-x 1 root wheel 1 May 20 14:57 Current -> A
lrwxr-xr-x 1 root wheel 3 May 20 14:59 CurrentJDK -> 1.5
Any suggestions? Is there a cleaner approach to uninstall Java on Mac then a simpl "move to thrash"!
cheers

Problem with Java after System Upgrade to 10.5.7

Hi,
I am facing problem with Java after having run Software upgrades.
Here is the whole story. I recently moved to iMac 10.5.6 from PowerPc 10.4. On this new machine I was having problem running a 3rd party application, which requires JVM. As this application worked well on Tiger, I decided to upgrade JVM on my iMAC using Software Upgrade(was I insane!!). As I like my systems to be updated (as with linux on my personal machine) I clicked "install all". As a result I have the following upgrades run on my machine:
2009-05-20 13:12:01 +0200: Installed "Mac OS X Update Combined" (10.5.7)
2009-05-20 13:12:10 +0200: Installed "Remote Desktop Client Update" (3.2.2)
2009-05-20 13:12:26 +0200: Installed "Java For Mac OS X 10.5 Update 2" (1.0)
2009-05-20 13:58:36 +0200: Installed "Java for Mac OS X 10.5 Update 3" (1.0)
2009-05-20 13:58:44 +0200: Installed "AirPort Utility Software Update 2009-001" (5.4.1)
2009-05-20 13:59:07 +0200: Installed "QuickTime" (7.6)
2009-05-20 13:59:22 +0200: Installed "iPhoto Update" (7.1.5)
2009-05-20 13:59:28 +0200: Installed "iLife Support" (9.0.2)
2009-05-20 13:59:38 +0200: Installed "iDVD Update" (7.0.3)
2009-05-20 13:59:58 +0200: Installed "iTunes" (8.1.1)
But now, simply running $ java on the prompt hangs, i.e. it takes no action.
$ which java
/usr/bin/java
$ ls -ltr /usr/bin/java
May 20 15:09 /usr/bin/java -> /System/Library/Frameworks/JavaVM.framework/Versions/Current/Commands/java
$java (no response)
Here is the output of $ top
PID COMMAND %CPU TIME #TH #PRTS #MREGS RPRVT RSHRD RSIZE VSIZE
703 java 98.8% 0:38.54 3 110 72 480K 184K 1964K 40M
Any clues?
cheers

Hi man,
In the wake of this java problem I resorted to keep working on my old machine, and today in my spare time I tried to fix this new machine.
So I execute $java on prompt, and then try to check the files it has opened, using lsof -p pid
I see it referring to
/System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Home/bin/java
isn't this usually the JAVA_HOME
However, executing $/System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Home/bin/java
hangs!!
but
$/System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/bin/java
works!!
$ pwd
/System/Library/Frameworks/JavaVM.framework/Versions/1.6/Home/bin
$ ./java -version
java version "1.6.0_07"
Java(TM) SE Runtime Environment (build 1.6.0_07-b06-153)
Java HotSpot(TM) 64-Bit Server VM (build 1.6.0_07-b06-57, mixed mode)
So, I changed the links as follows
borgraf:Versions raveesh$ l
total 72
drwxr-xr-x 3 root wheel 102 Mar 6 2008 1.3.1
lrwxr-xr-x 1 root wheel 3 May 21 19:42 1.4.1 -> 1.4
drwxr-xr-x 8 root wheel 272 May 21 19:42 1.6.0
lrwxr-xr-x 1 root wheel 3 May 21 19:44 OldCurrentJDK -> 1.5
lrwxr-xr-x 1 root wheel 5 May 21 19:44 1.4 -> 1.4.2
lrwxr-xr-x 1 root wheel 5 May 21 19:44 1.3 -> 1.3.1
lrwxr-xr-x 1 root wheel 5 May 21 19:44 1.5 -> 1.5.0
drwxr-xr-x 8 root wheel 272 May 21 19:44 1.4.2
drwxr-xr-x 8 root wheel 272 May 21 19:44 1.5.0
lrwxr-xr-x 1 root wheel 5 May 21 19:44 1.6 -> 1.6.0
lrwxr-xr-x 1 root wheel 1 May 21 19:44 OldCurrent -> A
drwxr-xr-x 8 root wheel 272 May 21 19:44 A
lrwxr-xr-x 1 root wheel 3 Jun 4 17:14 CurrentJDK -> 1.6
lrwxr-xr-x 1 root wheel 3 Jun 4 17:21 Current -> 1.6
Linking my Current and CurrentJDK to 1.6 and it works!
However, shall that be the reason!
what is in your /Versions/Current/
I got the following
$ ls /System/Library/Frameworks/JavaVM.framework/Versions/Current
CodeResources Frameworks JavaVM
Commands Headers Resources
There is no /Home in here, which is usually the case for /1.5 or /1.6
Anyways, things seems to work for the moment. Lets see if I get problem with using Java.
thanks

I am having problems with mail after upgrading to mountain lion. Is there a way to go back to lion?

I am having problems with mail after upgrading to mountain lion. Is there a way to go back to lion?

It would always be easier to fix the Mail problems.

Problems with Mail after upgrading to 10.9.1

I am running into problems with Mail after installing 10.9.1. I had NO problems with Mail prior to this update.
Problems I have encountered so far are:
- I don't receive some e-mails on my Gmail account.
- I have sent e-mails that supposedly got "sent" but do not show up in my Sent box both on mail and on web Gmail. My Outbox is empty also.
Has anyone encountered the same problems and found a solution?
Thanks in advance!

Yes Paul I have, but no solution. I cannot send email. My ISP uses a smtp mail server for sending and It will not log in. Have had ISP on phone and checked all settings. Can only put it down to Mavericks.
It worked OK for a week after upgrading then stopped. So now having to use web mail to send email.
Strange thing is I receive mail OK, just cant send.

Problem with saving a pdf file to computer. Continually get an error message " This document could not be saved. There was a problem reading this document (21).

Need advice on a saving file issue. I'm having problem with saving a .pdf file to computer. Continually get an error message " This document could not be saved. There was a problem reading this document (21). This is new as this error message just recently started to pop-up.

More information about this issue can be found here:
https://forums.adobe.com/thread/1672655
A "quick" fix that worked for me was to uninstall Adobe... then download the base install for Adobe Reader 11.0.
Then download each of the individual updates and run them sequentially.
I've installed back up to the last security update which is version 08 and have been able to do normal Save As operations.
You will have to disable automatic updates in order to stay at version 08 until Adobe resolves this issue in a later release.
http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Windows
Adobe Reader 11.0 - Multilingual (MUI) installer    AdbeRdr11000_mui_Std
Adobe Reader 11.0.01 update - Multilingual (MUI) installer    AdbeRdrUpd11001_MUI.msp
Adobe Reader 11.0.02 update - All languages    AdbeRdrSecUpd11002.msp
Adobe Reader 11.0.03 update - Multilingual (MUI) installer    AdbeRdrUpd11003_MUI.msp
Adobe Reader 11.0.04 update - Multilingual (MUI) installer    AdbeRdrUpd11004_MUI.msp
Adobe Reader 11.0.05 security update - All languages    AdbeRdrSecUpd11005.msp
Adobe Reader 11.0.06 update - Multilingual (MUI) installer    AdbeRdrUpd11006_MUI.msp
Adobe Reader 11.0.07 update - Multilingual (MUI) installer    AdbeRdrUpd11007_MUI.msp
Adobe Reader 11.0.08 security update - All languages    AdbeRdrSecUpd11008.msp

HT1589 problems with itunes after updating..can't locate some of my songs..some have an exclamation point beside them how do i get these songs back in my itunes

I'm having problems with itunes after updating. I've lost all my playlists,,finally played around with it and got the songs back but some have an exclamation point beside them and can't be located. they are songs i've purchased. I'm not very computer literate so this is a major problem. I have spent hours with this. I just want all my songs to play even though I'm not happy that I have to recreate my playlists. It would be so much easier if I knew and understood how to correct this. Has anyone else had this problem and if so..is there an easy way to correct it?

Not sure how this is an ipod touch question.
Perhaps you should post in the itunes forum.

Increase in CPU Utilization after migration from APEX 3.1.2 to APEX 3.2

Has any noticed any increase in CPU Utilization after migrating from APEX 3.1.2 to APEX 3.2?
Thanks,
Mark

Hi Mark,
Take a look at some of the usage reports within APEX (sessions, page views etc) to get an overall feel for where the time is being consumed.
You'll also find it useful if you can run a statspack report (or AWR, ASH etc) during a busy period to be able to drill down into where that CPU is being spent.
There's no magic answers here unfortunately, you need to track it down to where the time is being spent before working back up to find out where best to tune it.
John.
Blog: http://jes.blogs.shellprompt.net
Work: http://www.apex-evangelists.com
Author of Pro Application Express: http://tinyurl.com/3gu7cd
REWARDS: Please remember to mark helpful or correct posts on the forum, not just for my answers but for everyone!

Problems with saving after Migration on ApEx 2.2

Similar Messages

Maybe you are looking for