Problems with saving edited photos using Photoshop Elements 5.0 on WIndows 8.

Since a week I can not save the edited photos - when I try the communicate: "Caould not complete your request because of a program error" appeares. I had no problem with saving edited photos before, with the same software. My computer runs on Windows 8, 64 bit version. My Photoshop Elements is version 5.0. Where is the problem?

W dniu 2013-06-16 15:36, dj_paige pisze:
>
Yes, I did it long ago.

Similar Messages

  • I got iPhoto '11, version 9.2.3 and want to edit photos using Photoshop elements 10. I have put P'shop 10 as the preferred editor... but when I click on the photo in iPhoto the Adobe p'shop 10 program opens BUT the picture does not open for editing. Wha.

    I got iPhoto '11, version 9.2.3 and want to edit photos using Photoshop elements 10. I have put P'shop 10 as the preferred editor... but when I click on the photo in iPhoto the Adobe p'shop 10 program opens BUT the picture does not open for editing. What the heck... I did fine with the old iPhoto and "Shop elements 6... .

    Adobe now hides the editor - what looks like it is not - you want the editor hidden in the support folder - see http://forums.adobe.com/message/3955558#3955558 for details
    LN

  • Photoshop and elements 13  Working in iPhoto Want to edit image using photoshop elements Did the following  IPhoto Preferences Advanced Edit Photos: In drop down menu chose in Photoshop Elements  Also control click and chose edit in external editor  Drop

    Photoshop and elements 13
    Working in iPhoto
    Want to edit image using photoshop elements
    Did the following
    IPhoto>Preferences>Advanced>Edit Photos: In drop down menu chose in Photoshop Elements
    Also control click and chose edit in external editor
    Drop down menu edit photos in external program>photoshop Elements
    Go to to the image I'm working on  --- selected the image, the clicked on edit. When nothing happened I double clicked the image. Still elements didn't open. Then I opened the Elements editor, went back to iphoto and tried the entire process again. the photo still didn't open on Elements 13 for editing.
    I have 3 Elements 13 books as well as looked on line--all my references say the exact same thing ---- iPhoto>Preferences>advanced>edit in external program>photoshop Elements
    I uninstalled and reinstalled both iPhoto as well as Elements.
    I spoke with application technical support.  There appears to be nothing wrong with my copy of iPhoto.  However there is no support from Adobe.  I waited for over 1.5 hours for chat support several days ago, and finally gave up.

    You are probably choosing the obvious file rather than the correct file as the PSE editor. The actual editor is hidden away inside the Support Files folder. The PSE file at the top level of the PSE folder in Applications is just an alias for the welcome screen and what you're describing is exactly what happens when you choose that. You want this one:

  • How can I burn just a few photos to a cd using Photoshop Elements 11 on a windows 7 computer?

    As a fairly new user of Photoshop Elements 11 I would like to burn just a few photos to a cd, not he whole catalogue. Please can somebody suggest an answer to this problem.

    Thanks for your help, much appreciated.
    Original message----
    From : [email protected]
    Date : 15/09/2014 - 14:21 (GMTST)
    To : [email protected]
    Subject :  How can I burn just a few photos to a cd using Photoshop Elements 11 on a windows 7 computer?
        How can I burn just a few photos to a cd using Photoshop Elements 11 on a windows 7 computer?
        created by 99jon in Photoshop Elements - View the full discussion
    File >> Export As New
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6730807#6730807
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop Elements by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Problem with two monitors while using Photoshop, windows move from 2nd screen to 1st screen.

    Problem with two monitors while using Photoshop, windows move from 2nd screen to 1st screen.
    I saved a new workspace and it did not help.
    No problem before I went to Maverick.

    I found the fix, go to System Preferences and open Mission Control and uncheck the box to keep monitors as they were (When switching to an application...........)

  • How can I copy and paste my edited Photo in photoshop elements 12?

    How can I copy and paste my edited photo from photoshop elements 12 into a word document?

    In full Editor:
    Go to Select menu>all
    Go to Edit menu>copy to put it on the clipboard
    Go to your destination document>Paste
    Hope that this works for you as well.

  • I'm using photoshop elements 2.0 and window vista.  when i want to crop i cannot enter any values in

    I'm using photoshop elements 2.0 and window vista.  when i want to crop i cannot enter any values in the width and height boxes.  the cursor won't enter.  same thing with resolution.  what did i do?  what's wrong?

    The first thing you might try is resetting the Crop Tool by right clicking on the crop icon in the tool options bar and choosing Reset Tool.
    If that doesn't work then the next thing is to reset the photoshop elements 2 settings file by holding down
    the Shift+Ctrl+Alt keys just after clicking or double clicking on the pse 2 shortcut.
    Keep holding the keys until a dialog appears ask if you want to delete the photoshop elements settings file
    and click yes in the dialog.

  • How do I change the default quality when saving a series of edited photos in Photoshop Elements 9

    Say I have saved a series of edited photos using Quality 5. I then change to saving a new series using Quality 10. Each time I save a photo the quality appears as 5 and I have to change it manually to 10. Eventually the default quality will automatically change to 10, but it takes a fair numbers of saves to do this. How do I get the default quality to change as soon as I want it changed rather than having to wait for the software to finally do it itself?

    Interesting point. My situation is where I change the default quality then carry on using the new quality without closing down the program. What you are suggesting is that changing the default quality,  closing down the program, then restarting it might get the quality change to stick. I'll give it a whirl and see what happens.

  • I have a problem with external editing preferences where Photoshop will not launch when I choose "Edit In"...

    Hi. I have a problem with external editing preferences. If I add Photoshop as an external editor, it won't launch when selected, if I add it as an additional external editor it will. Why? How can I fix this as I need to use Photoshop and another program as the additional external editor.
    I use a Mac running OS X (10.8.5) and PS CS4 and LR 5.7. Any ideas on a fix? Thanks in advance.

    I don't know why Photoshop won't start. However, it's possible to create external editor presets using the additional external editor tools. There are instructions on how to do this in the Lightroom help. You could assign Photoshop and create one preset, and then assign another program and create another preset.
    I don't know if deleting your preferences would fix the problem or not. It can sometimes fix other problems.
    Preference and other file locations in Lightroom 5

  • How to send emails with photos using Photoshop Elements 12?

    I did everything according to the instructions, defined e-mail address, got the code and confirmation of the adress, but still when I try to send meile in the end there is symbol that the computer is trying to perform this task, but the minutes passes by, and nothing changes. I have spend a lot of time trying to fix it - with no success. I use Windows 8 and Microsoft OutLook. I have no problems sending other thing. I also have Mozzilla Thunderbird om my computer, but it is synchronised to OutLook (can use both of them, whichever I want).
    I bought Photoshop Elements 12 to send and edit photos. I'm close to that to give up this product, despite the fact that the rest of his functions as a judge very successful. It's great that there is a possibility to get a refund of the purchase of this product for 30 days from the purchase over the internet.
    Please, help me.
    Marcin

    Do you see Adobe Email dialog hidden along the right edge of the screen? Please try dragging that in the middle of screen and then send.
    Thanks
    Andaleeb

  • When I external edit an aperture photo using Photoshop Elements 9 and then get out, the changes are not reflected in Aperture when I return - this used to work for me but doesn't seem to have for some time - help please?

    Have used Aperture for some time - at some point this stopped working - not sure when
    workflow:
    click photo and elect to use the external editor (Photoshop Elements 9)
    Copy of the photo is created in Aperture with the "O" badge and I am rolled out to Photoshop
    Have to change the type to 8-bit in Photoshop to start making changes
    When done and I exit I am prompted to save the photo
    On returning to Aperture however the "O" badged photo does not get updated/reflect my changes
    Other Things:
    I can find a changed photo sitting in the Aperture Library using finder or Photoshop itself - so I know changes have been made a new file saved (TIFF).
    I am wondering if I am missing some (new) preference such that the changes are not proerly being saved for re-display/storage in the Aperture Library
    I am running Lion OSX at the moment but the behaviour was the same under Snow Lepoard versions.
    Current version of Aperture is 3.1.3, Elements is 9.0
    Any help/suggestions greatfully received

    Try using psd.  Some rerports indicate some confustion between the apps with TIFF.  See:
    https://discussions.apple.com/message/15921933#15921933
    I cannot confirm, nor test, since I use PS CS5, and not Elements.
    Ernie

  • Saving edited photos from photoshop

    If I open up photoshop elements 4, then edit my pic, I can't seem to save it to iphoto. In fact, it says saved, but I can't locate it! I hesitate to ask for help because this seems so stupid. I know it's a simple answer, but I'm so frustrated and elements is just sitting here unused because I don't know how to save my work! help!

    terrabear:
    Using 2 Image Editors in iPhoto
    If you want to use both iPhoto's editing mode and a 3rd party editor without having to go back and forth to the Preference pane, once you've selected the 3rd party editor as your editor of choice, reset the Preferences back to "Open in main window". Then when you Control-click on an image, you can select "Edit in external editor" in the Contextual menu to edit in your selected editor.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application, iPhoto dB file backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar

  • Editing Photos in Photoshop Elements

    I can't sort out what happens to my photo edits when done in PSE. I am careful to save the file as a .jpg and save it to the same folder. Nonetheless when I look at the photo in iPhoto, I see the unedited version. I've got to believe that his is, "pilot error" but for the life of me I can't find the correction.
    I find the file that I want to edit via "file", "open" from PSE, then enter the file number that I see in iPhoto, "information" e.g. img_3405. I edit the file in PSE and save, even getting the "...do you want to replace it?" warning. When I go back to iPhoto, even after close and open, I see the unedited photo. Arrrrrrg!
    What do I do (or expect) wrong?
    Wayne

    save it to the same folder.
    Are accessing PSE from within iPhoto or from the Finder? Are you saving with the same file name?
    Here are some tips on using PSE from within iPhoto:
    Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
    1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
    2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
    3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
    This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
    NOTE: With Photoshop Elements 6 the Saving File preferences should be configured: "On First Save: Save Over Current File". Also I suggest the Maximize PSD File Compatabilty be set to Always.
    If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window". That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and seledt "Edit in external editor" in the Contextual menu). This way you get the best of both worlds
    2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
    3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
    This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..

  • Sending photos using Photoshop Elements 12 and Windows 8?

    I did everything according to the instructions, defined e-mail address, got the code and confirmation of the adress, but still when I try to send meile in the end there is symbol that the computer is trying to perform this task, but the minutes passes by, and nothing changes. I have spend a lot of time trying to fix it - with no success. I use Windows 8 and Microsoft OutLook. I have no problems sending other thing. I also have Mozzilla Thunderbird om my computer, but it is synchronised to OutLook (can use both of them, whichever I want).
    I bought Photoshop Elements 12 to send and edit photos. I'm close to that to give up this product, despite the fact that the rest of his functions as a judge very successful. It's great that there is a possibility to get a refund of the purchase of this product for 30 days from the purchase over the internet.
    Please, help me.
    Marcin

    Please try out the instructions mentioned on page:
    http://psekb.blogspot.in/2013/04/pse-editor-is-not-launching-windows.html
    and see if it helps.
    Thanks,
    Anwesha

  • I can not save edited photos in Photoshop Elements.

    I bought Photoshop elements because i thought it would help me save manipulated photos. When i edit photos and change them, then save the changes under a different file name, I continutally get the unedited original when I try to view the edited photo

    Hi Bucephal,
    That is pretty odd, indeed.
    Just so that the community can help - could you provide us with information like what version you're using, which OS, and a brief explanation of what effect you're applying, or how you're manipulating the image?
    Cheers,
    David

Maybe you are looking for

  • I can't post to iphone discussion?

    I wrote a really detailed description of my problem but can't post (do not enter symbol and greyed-out Post button). Why?

  • "You can be reached by iMessage at" the email is grey colored. Why and how can I use this email to receive iMessages?

    When trying to select an email address to receive iMessages I can't seem to select an email. It's in a light grey color. I can't figure out how to get it to be in a normal color so I can highlight it to use for iMessages. It's my son's iPod Touch and

  • Extending Trendlines and Changing Where Y-Axis Crosses

    Hi, I'm trying to create a graph for a class in school. I've created a scatterplot with a linear trendline through my data. Now I would like to extend that trendline to continue past my data points. I know that in Excel you can simply forecast the tr

  • Logic 7.1 - Where's the buffer setting for DTDM/DAE?

    Seems that I cannot find the buffer to vary my Digi HD setup. I can see the buffer process manager at the bottom of the driver setup menu (small,medium,large) but I would love to find the usual 128-1024 options that are the usual standard offerings.

  • Do I need to OK?

    When I look at the Lightroom tutorial I se the instructors manulating the photos but in the end they never seam to OK or press Done? I am perhaps so fixed to other type of programs that i am allways looking where to press the "I've  done this" button