Problems With Saving Video in Lightroom 4. Blacked-out Frames

Hi,
I have edited 145 clips for a video I'm putting together in LR4. After saving them, most of the clips have a few frames at the beginning blacked-out, or patchy black. I do not like this effect. Does anyone know how I might correct this? Thanks!
Nick

Maybe it was an issue with my computer or graphics card.

Similar Messages

Problems with saving video clips

Ok here is what I'm looking to do. I'm working on a project containin over 15 hours of raw video spread. Can I capture one full hour of video, go into FCE and pick the individual clips from that one hour that I want, and delete the other unused video without messing with the clips I saved? If so, how do you go about doing this.

Whatever you capture, FCE saves. In other words, if you capture an hour of video and only use 10 minutes in your Timeline, FCE still wants to reference that entire hour. Delete the rest of the video and you will loose the reference and the project will not work.
You can always use Capture Clip to set In and Out points in your raw video, thusly capturing just what you need. FCE does not have batch capture, so you will have to capture one clip at a time but this will save you space.
Be sure to properly log your tapes (Reel 1, Reel 2, etc) in case you need to recapture the project later on
There are alternatives: You can capture one tape at a time, go in, "cut out" the clips you want, saving them to a new Sequence. When you have the clips you want, you can export that Sequence as a self-contained Quicktime movie then ditch the original tape. However, I think Capturing Clip is the more desired approach

Is it somebody Except for me Who has problems With waching videos on ipad after the 5.0.1 update

Is it somebody Except for me Who has problems With waching videos on ipad after the 5.0.1 update

Hi,
yes I have big problems as soon as I open the video app i get a total black screen, even the upper bar with the time disappears. I already tried to:
1. closing the app and reopen it
2. restart the iPad
3. restore the iPad via iTunes
4. Begging the app to work again.

Having PROBLEM with playing videos on my 5800

Hi all,
I bought my nokia 5800 2 days ago, and i am havig a problem with my videos.
When i try to play a video (MP4) SOMETIMES it plays it without a problem, but SOMETIMES it plays a black screen with sound. And the most strange thing is it can play a video and in few hours it will just play sound on the same video!!
Please try to help..

pavilion_alex wrote:
phones like 5800 and other similar must be updated because a new update solves the existing problems on the device.
download and install this http://www.nokia.co.uk/get-support-and-software/download-software/device-software-update/download and carefully read the instructions it gives you before the update.
...Or return the phone and replace it with something from another manufacturer that either A) works out of the box, or B) doesn't require such an awkward and painful update procedure. Nokia seem incapable of either.
Message Edited by garnett on 26-Oct-2009 12:49 PM

Problem with saving a pdf file to computer. Continually get an error message " This document could not be saved. There was a problem reading this document (21).

Need advice on a saving file issue. I'm having problem with saving a .pdf file to computer. Continually get an error message " This document could not be saved. There was a problem reading this document (21). This is new as this error message just recently started to pop-up.

More information about this issue can be found here:
https://forums.adobe.com/thread/1672655
A "quick" fix that worked for me was to uninstall Adobe... then download the base install for Adobe Reader 11.0.
Then download each of the individual updates and run them sequentially.
I've installed back up to the last security update which is version 08 and have been able to do normal Save As operations.
You will have to disable automatic updates in order to stay at version 08 until Adobe resolves this issue in a later release.
http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Windows
Adobe Reader 11.0 - Multilingual (MUI) installer    AdbeRdr11000_mui_Std
Adobe Reader 11.0.01 update - Multilingual (MUI) installer    AdbeRdrUpd11001_MUI.msp
Adobe Reader 11.0.02 update - All languages    AdbeRdrSecUpd11002.msp
Adobe Reader 11.0.03 update - Multilingual (MUI) installer    AdbeRdrUpd11003_MUI.msp
Adobe Reader 11.0.04 update - Multilingual (MUI) installer    AdbeRdrUpd11004_MUI.msp
Adobe Reader 11.0.05 security update - All languages    AdbeRdrSecUpd11005.msp
Adobe Reader 11.0.06 update - Multilingual (MUI) installer    AdbeRdrUpd11006_MUI.msp
Adobe Reader 11.0.07 update - Multilingual (MUI) installer    AdbeRdrUpd11007_MUI.msp
Adobe Reader 11.0.08 security update - All languages    AdbeRdrSecUpd11008.msp

Problems with saving edited photos using Photoshop Elements 5.0 on WIndows 8.

Since a week I can not save the edited photos - when I try the communicate: "Caould not complete your request because of a program error" appeares. I had no problem with saving edited photos before, with the same software. My computer runs on Windows 8, 64 bit version. My Photoshop Elements is version 5.0. Where is the problem?

W dniu 2013-06-16 15:36, dj_paige pisze:
>
Yes, I did it long ago.

I'm having problem with exporting video from premiere pro cc 2014

I'm using Adobe Premiere Pro CC 2014 and I'm having problem with exporting video.
When I click Export and media, the window for exporting appears and it starts exporting video.
But after a few minutes, it looks like it has completed exporting video and says there's a bug in exporting.
It literally says it has a problem with compiling, but I don't know what the real problem is.
I tried many things like restarting computer and Premire Pro but it's no use.
But it works when I use Adobe Media Encoder CC 2014 for exporting video.
If anyone knows any possibilities about why this problem happens, please let me know.

I'm having a similar issue. When I go to export my project, I add it to the render queue, set it up with the h.264 settings that I've used with countless past versions of the program, and then hit render. Randomly, at some point in the process, the render just stops and the ETA just keeps climbing. I actually had to save an XMF file of the CC 2014 project and bring it into the previous CC version of Premiere just to finish it. Even a clean re-install of CC 2014 doesn't work.

Hi! I´m having problems with showing video files in Qlab on my Macbook Air. A sound/video technician told me to "blow out" my Mac. Was told to use cmd+ r when restarting. Is this the right way?

Hi! I´m having problems with showing video files in Qlab on my Macbook Air. It started suddenly. Consulted a sound/video technician who told me to "blow out" my Mac. Was told to use cmd+r when restarting. Is this the right way to clean up my Mac? And is it likely that some kind of bug is causing problems for Qlab to show video files? I´ve already tried with a bunch of different video files and sometimes Qlab plays them and sometimes not. I need the Qlab playlist for a theatre show and only have a week until showtime so starting to really worry. Is there anyone out there who can help?

Your Mac runs maintenance in the background for you.
Command + R gives you access to restore, repair, or reformat the drive using OS X Recovery
No idea why that was suggested.
You may have a third party video player installed that's causing an incompatibility issue.
Check these folders:
/Library/Internet Plug-Ins/
/Library/Input Methods/
/Library/InputManagers/
/Library/ScriptingAdditions
~/Library/Internet Plug-Ins/
~/Library/Input Methods/
~/Library/InputManagers/
~/Library/ScriptingAdditions
The first four locations listed are in the root-level Library on your hard disk, not the user-level Library in your Home folder.The tilde (~) represents your Home folder.
To access the Home folder in OS X Lion or Mountain Lion, open the Finder, hold the Option key, and chooseGo > Library.

Itunes 7.0.1 still has major problems with jerky video

I thought the newest update to Itunes 7 would fix my problems with jerky video that have begun since this Itunes 7 came out. At first I thought maybe my computer was too old (powerbook 12" 1.5 Ghz, with maxed out RAM) to play the new resolution, but then I realized that even my old TV shows had jerky playback. It doesn't seem to matter what size. The audio works fine, but the video freezes every few seconds. This is not really acceptable and I'm thinking about uninstalling Itunes 7 until apple issues a fix that address this video playback issue. Anyone have any suggestions or heard anything? Thanks!
- Tpetdoctor

I located the problem of the jerky (1 to 2 frames per second) video that started after updating to iTunes7 and 7.0.1!
Dragging (copying) the file "ATIRadeon9700GLDriver.bundle" from system/library/extensions/ to the desktop and deleting it from the extensions folder (or else simply deleting it and then dragging it from the trash to the desktop) returns normal smooth video to non-H.264 mpeg video on my second generation iMac (ATI Radeon 9600). Unfortunately, this also makes Coverflow stop working with the message "iTunes is unable to browse album covers on this computer". I'm not sure what else will be disabled by moving this file.
Obviously, this is not a solution, or even a feasible workaround. Where can I get a "good" ATI driver? I went to the ATI site "https://support.ati.com/ics/support/default.asp?deptID=894&task=knowledge&fold erID=27" and tried installing "macosx-ati-displays-4-5-7.dmg", but to no avail.

Problems with Flash Video

OK - I have had intermittent problems with Flash video, basically it gets choppy, usually after about 20 minutes - half an hour of watching - recently this problem has gotten worse - coinciding with a recent system update perhaps? - it's more or less anytime I stream something, and it happens on all browsers, even when the movie has clearly downloaded and is buffered way in advance of the playhead.
On 2 occasions recently leaving the movie to play just to see what happens has led to a kernel panic.
I've heard alot about Flash video generally being a resource hog and not playing ball sometimes - is there a way to solve this issue? Things I have tried - reset sound to 16 bit 44.1 khz in audio/midi manager; fixed permissions; run Tech Tool - everything seems to be fine hardware wise - I think there are some incompatible driver issues that are meesing up RAM usage but have no idea what or how to solve this... Any ideas anybody?
Thanks.

If, as you show, you are running 10.5.2, that is out of date. You need to install the 10.5.8 combo updater.
It is also possible that your FlashPlayer is out of date.
The latest version of Adobe FlashPlayer can be obtained from here:
http://www.adobe.com/shockwave/download/download.cgi?P1ProdVersion=ShockwaveFlash
(You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS.
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14157
and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.

Hello I suffer from a problem with your MacBook There is a black line in screen

Hello
I suffer from a problem with your MacBook
There is a black line in screen
http://i48.tinypic.com/35apzz8.png

Is the line always present? If you boot up the MacBook holding down the option key during startup so that you get to the startup manager, is the line still there?
If so you have a hardware issue and it needs to be repaired. Contact Apple using their Express Lane if you live in a country where that is available, or call the appropriate phone number on this page if not. You can also take the MacBook in to an Apple store or service provider.
Best of luck.

Memory leak problems with loading videos over and over.

I'm having memory leak problems with loading videos into a VideoPlayer aswell as FLVPlayback.
What the flash should do:
- Should be running for 7 days without having to restart the projector.
- Interface that shows people around a 360 3D model with 5 different parts and at the stops it makes during the rotation you can click to zoom in on a location which plays a movie for that aswell.
- Shows a video out of 5 parts for a 360 rotation in 3D in mp4 video (added each time and cleaned up, see code below).
- Still images are used when the video clips are done playing (MovieClip in stage).
- Should run automatically when there is no user interaction for X minutes.
What the problem is:
- The flash (as a exe and swf i guess) starts to consume memory over time (say 10 hours) until the projector crashes. This usually at around 1.75 GB of memory.
I cannot see why the Flash cannot garbage collect this and free up the memory. Mabye there is something I don't understand about the garbage collection in flash?
Here is some code from the video loading and playing:
var fVideo:VideoPlayer;
VideoCreate();
function VideoReady(pEvent:VideoEvent):void
trace("VideoReady()");
     // start playing video
fVideo.play();
function VideoLoad(pUrl:String):void
     trace("VideoLoad(" + pUrl +
     VideoCreate();
     if (pUrl != "")
          if (fVideoFolder + pUrl == fVideo.source)
               fVideo.seek(0);
VideoReady(null);
          } else {
trace(fVideo.state);
               if (fVideo.state !=
VideoState.DISCONNECTED) fVideo.stop();
fVideo.close();
fVideo.load(fVideoFolder + pUrl);
     } else {
// error no url
function VideoCreate():void
     trace("VideoCreate()");
     // remove old one
     if (getChildAt(0) == fVideo)
          removeChildAt(0);
     fVideo = new
VideoPlayer(1024, 768);
     addChildAt(fVideo, 0);
     fVideo.autoRewind = false;
fVideo.addEventListener(VideoEvent.COMPLETE, VideoDonePlaying);
fVideo.addEventListener(VideoEvent.READY, VideoReady);

Hmm. It's in connection with Dropbox. Så apparantly you can only use one of the two at the same time if you want the programs integrated in Finder.

Problem with "Saved with Id" in Reports

Hi Group,
I am having problem with "Saved with id" functionality.
1.) I created a Query in sq01 as "query1".
2.) Copied the source code of this query into a z program
ztest_query.
3.) Now executed the report "ztest_query" in background with "Saved with Id" checkbox checked and id as "1234".
4.) Now where/how can I search for this id "1234" to retrieve my list.
5.) Normally if I dont change the report name and use the program aq*query1 which is self generated one, this works and I am able to retrieve the saved list from Transaction
SQ01.
Please let me know how this can be achieved.
Regards
Ankur Bhandari

Ankur,
Did you find a solution for this problem. Not many seem to be using this "Save list to id" functionality.
Thanks
Vyas

Problem with Nokia Video Manager - No video, only ...

Hi all,
I have a problem with nokia video manager. I have been converting movies to mp4 and watching with my cell phone for a while now. But all the videos I have converted were less than 30 min. long.
When I tried to watch a video longer than 36 minutes, the picture froze some time around 36th minute and only the sound continued to play. I have tried several other videos with similar lenghts and all seem to freeze at the same exact point. The player continues to play the sound after picture freezes.
Could someone please help ???
Regards
/Cenk

Hi davidf
Thanks for the information,I must confess that I always use:
http://www.slysoft.com/en/clonedvd-mobile.html
when transferring movies to the N95, but that is just a personal choice!
Happy to have helped forum in a small way with a Support Ratio = 37.0

I have problem with playing stream fullscreen. it goes black but with sound

i have problem with playing stream fullscreen. it goes black but with sound. i have to wait 10-15 minutes then i can press fullscreen. what to do?
s

Thanks!! but i been fixing now for 10 minute ago by restart my macbook pro. My case is it show normal with Intenal-speakers and nothing mark with red light or mult so i tried to restart that it working again

Problems With Saving Video in Lightroom 4. Blacked-out Frames

Similar Messages

Maybe you are looking for