Problems with SD Card After Reboot

Hi, I formatted my SD Card through my Xperia Z3 with Lollipop.I erased all data from Spotify, included the folder spotify.music.Installed the Spotify again with the SD Card connected and all worked fine.I did download from all my albuns, and verified on File Commander, and all data were in SD Card. The problem-->>>After reboot the phone the SD Card isn´t recognized.I did all procedure again, and all return to work, but every time that I reboot the phone, I have to do do all these again. I tested format the SD Card and reboot my phone many times, and it´s all right.It´s necessary only a logon Spotify and the next reboot the SD Card don´t read more. Please, can you help? Thanks a lot!!!

Hi Spotify Family, My problem was resolved.I changed my SD. After was 128GB Ultra SandiskNow 32GB normal Sandisk -> http://www.bslive.com.br/acessorios-informatica/149-cart%C3%A3o-de-mem%C3%B3ria-32gb.html Remember that you have to erase all cache and uninstall the Spotify again before input the new SD Card. Good Luck for All  

Similar Messages

  • Problems with TV - Card after Kernel Upgrade

    Hi Folks,
    since the last Kernel Upgrade I've got problems with my tv tuner card. Since ever I had to set the tuner manually to 38. But now it seems that its not enough just to set this type.
    I used this script to set up my card correctly:
    modprobe -r cx88-dvb cx88-blackbird cx8802 cx88-alsa cx8800 cx88xx
    modprobe cx88xx tuner=38
    modprobe cx8800
    Now I've got weired sound and only a few stations, with a very poor picture quality. After reloading the modules with the script dmesg says:
    tda9887 2-0043: destroying instance
    tuner-simple 2-0061: destroying instance
    cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
    ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 16
    cx88[0]: subsystem: 0070:3401, board: Hauppauge WinTV 34xxx models [card=1,autodetected]
    cx88[0]: TV tuner type 38, Radio tuner type -1
    tuner' 2-0043: chip found @ 0x86 (cx88[0])
    tda9887 2-0043: creating new instance
    tda9887 2-0043: tda988[5/6/7] found
    tuner' 2-0061: chip found @ 0xc2 (cx88[0])
    tveeprom 2-0050: Encountered bad packet header [00]. Corrupt or not a Hauppauge eeprom.
    cx88[0]: warning: unknown hauppauge model #0
    cx88[0]: hauppauge eeprom: model=0
    tuner-simple 2-0061: creating new instance
    tuner-simple 2-0061: type set to 0 (Temic PAL (4002 FH5))
    input: cx88 IR (Hauppauge WinTV 34xxx as /class/input/input8
    cx88[0]/0: found at 0000:01:07.0, rev: 5, irq: 16, latency: 32, mmio: 0xe6000000
    cx88[0]/0: registered device video0 [v4l2]
    cx88[0]/0: registered device vbi0
    From my (limited) point of view the problem is, that tuner-simple does not loads the correct tuner type? I've looked into modinfo from tuner-simple but there is no parameter for type... What else could be the problem?
    Thanks in advance
    Badcel

    Hi cjpembo,
    my Card looks like:
    01:07.0 Multimedia video controller [0400]: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 05)
    01:07.1 Multimedia controller [0480]: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] [14f1:8811] (rev 05)
    My card seems to be another version. Regarding to the v4l Wiki: http://linuxtv.org/v4lwiki/index.php/Tu … ted_Tuners
    A new Hauppauge WinTV PCI-FM card is here (pci_ids: 14f1:8800, 14f1:8811), using the TCL MFPE05-02 PAL (DK BG I) FM tuner. It just implements mk3 API, you can use philips 1216me mk3 (tuner=38) instead.
    If I don't specify any module parameters, the tuner type 0 is selected.
    ACPI: PCI interrupt for device 0000:01:07.0 disabled
    tda9887 2-0043: destroying instance
    tuner-simple 2-0061: destroying instance
    Linux video capture interface: v2.00
    cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
    ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 16
    cx88[0]: subsystem: 0070:3401, board: Hauppauge WinTV 34xxx models [card=1,autodetected]
    cx88[0]: TV tuner type -1, Radio tuner type -1
    tuner' 2-0043: chip found @ 0x86 (cx88[0])
    tda9887 2-0043: creating new instance
    tda9887 2-0043: tda988[5/6/7] found
    tuner' 2-0061: chip found @ 0xc2 (cx88[0])
    tveeprom 2-0050: Encountered bad packet header [00]. Corrupt or not a Hauppauge eeprom.
    cx88[0]: warning: unknown hauppauge model #0
    cx88[0]: hauppauge eeprom: model=0
    tuner-simple 2-0061: creating new instance
    tuner-simple 2-0061: type set to 0 (Temic PAL (4002 FH5))
    input: cx88 IR (Hauppauge WinTV 34xxx as /class/input/input8
    cx88[0]/0: found at 0000:01:07.0, rev: 5, irq: 16, latency: 32, mmio: 0xe6000000
    cx88[0]/0: registered device video0 [v4l2]
    cx88[0]/0: registered device vbi0
    The card is not listed in my local PCI ID repository. And it seems, that the PCI ID is not known to the PCI ID Repository: http://pci-ids.ucw.cz/iii/?i=0070
    Badcel
    Last edited by badcel (2008-08-24 09:46:18)

  • Problem with swap files after reboot.

    Hello
    I have installed Solaris 10 10/09 s10x_u8wos_08a on a Sun Fire X4140.
    The file system is UFS.
    I wish to add more swap space
    I have created these two files under /export/home:
    -rw------T 1 root root 5368709120 Jun 16 10:12 newswap
    -rw------T 1 root root 2147483648 Jun 16 10:38 newswap2
    When I enter swap -a /export/home/newswap, the command succeeds and I can see the additional swapspace with swap -l.
    I have the following configuration in /etc/vfstab
    # cat /etc/vfstab
    #device device mount FS fsck mount mount
    #to mount to fsck point type pass at boot options
    fd - /dev/fd fd - no -
    /proc - /proc proc - no -
    /dev/dsk/c1t5d0s1 - - swap - no -
    /dev/dsk/c1t5d0s0 /dev/rdsk/c1t5d0s0 / ufs 1 no -
    /dev/dsk/c1t5d0s7 /dev/rdsk/c1t5d0s7 /export/home ufs 2 yes -
    /export/home/newswap - - swap - no -
    /export/home/newswap2 - - swap - no -
    /devices - /devices devfs - no -
    sharefs - /etc/dfs/sharetab sharefs - no -
    ctfs - /system/contract ctfs - no -
    objfs - /system/object objfs - no -
    swap - /tmp tmpfs - yes -
    Although it is supposed to work, after reboot, the only mounted swap file is /dev/dsk/c1t5d0s1.
    The two file under /export/home aren't mounted as swap. Why?
    Can anybody give me some help on this issue?
    Thanks

    Actually you don't have to create a dedicated slice/filesystem for swap.
    You can create files and then use them as swap.
    Here is the link from the documentation of Solaris
    http://docs.sun.com/app/docs/doc/817-5093/fsswap-59089?a=view
    My issue is that although I have configured /etc/vfstab according to the documentation, the swap files aren't automatically mounted on boot. I can only mount them as swap manually with swap -a.
    Can anybody help?

  • Reception / Battery problems with iPhone 3GS after upgrading to iOS 4.2.1

    There are major reception and battery problems with iPhone 3GS after upgrading to iOS 4.2.1.
    I can not believe that Apple did not test this for major bugs like this one is.
    I am a business user and can not effort to have bad reception. Apple wants to gain in the business clients... I never had this with my former BlackBerrys!
    I need a reliable phone not a play thing like this is right now, it just needs it to work propely. And if a major bug like this comes along, fix it immediately. After the iPhone4 story, now this...incredible! Going back to my reliable BlackBerry! It just ain't reliable and takes forever to fix a problem.

    I have the same issue after iOS 4.2.1 update. I am using iPhone 3GS officially unlocked by Apple. I tried using different SIM cards and both carriers show same problem when using phone in 3G mode. Phone falls back to EDGE mode showing 'E' from '3G' at start. I have reset the phone and rebooted several times and moved to different cell areas in the city just to verify the problem.
    I had no such issues earlier. I also have Nokia E71 which shows full signal and has no such issues.
    I have posted the bug on apple iphone feedback page. I hope they Apple will fix the problem and test the release properly on all models before releasing to public.

  • Problems with Airport Card

    I move back and forth from school to home, and I've never had a problem with my card before. I recently restored my compuer back to its factory settings, and it was running great with my Airport Express. I came home after moving, and my computer won't read the WPA hooked up in my house. It says I am connected, but won't let me access the internet. I'm not sure why. We tried rebooting the connection, I've looked on my computer, used system preferences and everything. I did notice when I tried to use the Network Setup Assistant, it said the password I used to connect was wrong, but when my computer uses the airport icon at the corner of the screen, it accepts the password. Any ideas on how to fix this?
    iBook G4   Mac OS X (10.3.9)  

    An additional distressing note -- I went back to aforementioned building with the 10.4.5 Powerbook last night. Did a cold boot...and the Airport Express picked up the correct network DHCP info immediately. Roamed between a couple of WAPs, surfed a couple of sites, then sat down and tried to duplicate this feat...by re-booting at least 6 more times. Nada. I once again got factory default IP addresses on each attempted reboot. I changed nothing from the network settings I'd tried last week with this machine nor were any changes made to the network or WAPs. DHCP didn't work last week on several attempts (and reboots), worked ONCE yesterday on the first boot, then nothing again on the subsequent reboots.
    Again, I'm stressing that there don't "seem" to be problems with the network or WAPs because Windows clients consistently obtain DHCP and authenticate without issue.
    Does anyone have any ideas?

  • Gigantic problems with graphc card GeFore 8800GT under MacPro

    Hello
    I'm a user of MacPro 2 Quad-Core 3GHz computer with NVIDIA GeForce 8800 GT graphic card.
    This is my second card like this one becouse I can't find any other with low price for exchange and for good using OpenGL.
    Now I have gigantic problems with this card under Mac again, please help.
    It have extreme temperatures and graphic crashes when I use on any game or anything which harder use it. At real, my older card before burn out and go to trash after this. Now it comes again
    Is there any software to speedup windmill or any thing in my system what I can change for this? I have a plan to buy a cooler, but I need help in software before this.
    Why good quality company like Apple use this bugged cards in expensive computers, I can't understand this.
    Regards
    Dawid

    Nvidia had / has had / a run of problems - and Apple can choose Intel integrated, AMD.... or Nvidia basically. Though on PC side there are reference designs and then HIS (makes a really good ATI with its own design and cooper cooler), EVGA on Nvidia front.
    We don't get all that many options.
    Drivers always get a lot of "heat" and criticism.
    Was so glad to have X1900 as a choice, but not the $399 (or wait and $250 BTO) 5 yrs ago, and its history of problems. And recalls. Or ATI 2600XT. Can't win for losing sometimes.
    One reason I went and bought GTX 460 and run Windows on my Mac Pro today of all things. Other reasons too over the years. Locked into EFI graphic cards and you can have anything you want on the salad bar, as long as you want either shrimp or chicken.
    So heat up the oven, get out the egg timer, and have at it!

  • Problem with credit card verification with firefox 4 (works with safari!)

    I recently upgraded to Firefox 4 and tried to book train tickets online. I have done this many times before with earlier Firefox versions. Now however, after being redirected to the card verification page and submitting my security details, instead of confirming my booking Virgin trains asks me to log on again! I thought it was a problem with the website but I subsequently booked the tickets using Safari so I guess that means there is a problem with Firefox 4. Can I go back to the previous version?

    I, also, have previously made credit card purchases with Firefox version 3 without any problems.
    I only encountered this problem with credit card verification after downloading Firefox 4. I was however able to book tickets successfully, the same day, using Internet Explorer and the card verification went through as normal. I am confident that the problem was due to problems with the new version of Firefox.

  • Problem with the workbook after upgrade

    Hi all,
    We are facing some problems with the workbooks after BW 3.5 Upgrade.e.g. some templates are disturbed, some variables have been affected. So I have few doubts --
    1. What could be the possible reason behind this?
    2. What exactly got changed in the system which reflected this problems?
    3. What other problems might have occurred which we may not have noticed?
    4. How can I find out the number of workbooks affected due to this?

    Dear ,
    This is known issue:
    Please implement the below mentioned note as this will solve your issue,
    Note 1609237 :  Subsequent correction to 1567679
    Regards,
    Arvind

  • Problem with iWeb 09, after the publication in a local file.

    *Subject: problem with iWeb 09, after the publication in a local file, i can't see my blog, nor my photos, but before that all was working fine.*
    After the publication in the local file, I see all my pages, but there is a mistake on the page "Blog" where I just can see the top of my page, it's cut and I can't see it entirely, so I can't see the inputs while I should see 3 news or 3 inputs. And it's the same for the "Photos" page where the page is cut, I can't see the photos, and it's just written : "Put the slide show and subscribe".To finish, when I want to activate the comments, it doesn't work neither.
    Please help me.

    I want to activate the comments, it doesn't work neither.
    The comments feature is only available when you publish to the MobileMe server, so I don't think you can use it when you publish to a local file.

  • Has anyone had a problem with CS3 crashing after downloading OS 10.8.1 on a imac?

    Has anyone had a problem with CS3 crashing after downloading OS 10.8.1 on a imac? 

    Peggy
    You are probably correct. I tried all different variations to test it. As long as I quit each document separately, i.e., red dot it, I seem to bring up only one document after that whether I click on the document itself or open it within pages. The same is true with numbers.
    Two more questions:
    1) can you turn off the "resume" feature? If so, how? I could not find a way to do it.
    2) why the "save a version" feature in pages? What happened to the old "save" and "save as" features?
    Thanks so much, you saved me a lot of frustration but I am still going to install MS Office for Mac.
    Daveben

  • Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)

    Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)
    I re set up my Airport network , having had 4 expresses for years doing a good job. I bought another and an express, but then a time capsule after my external drive died. .Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)
    I moved house and have fibre network so 38mb/s - they all look ok on the utility, but its not till I saw the App version that they are not compatible as mac will not upgrade the version 6 ones, leaving me with 2 disjointed networks and 7 appliances, 4 of the old , 3 of the new.
    my new house is expansive so i wanted the extended range and airplay in each room.
    This is not told to customers, and utility doesnt show any issues.
    I do not seem to get any range from either network now, - and I'm quite experienced with airport (6 yrs of setting up & using & extending)
    Any advice ?
    LJx
    Message was edited by: LJLDN
    Message was edited by: LJLDN

    Sorry couldn't change the detonations to Airport and am new so cant delete!

  • I have a problem with my iphone,after upgrade software ios 6.0.1,  is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL  was not found

    I have a problem with my iphone,after upgrade software ios 6.0.1,  is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL  was not found

    You have to go to autherized iPhone agent.

  • Has anyone else had a problem with data? after updating my phone to the new update, i have all this data, and keep getting notifications that my data is getting high. i never had this problem before.

    has anyone else had a problem with data? after updating my phone to the new update, i have all this data, and keep getting notifications that my data is getting high. i never had this problem before.

    fair enough.  No need for any unnecessary posts either.  You issue had been addressed ad nauseum already in this forum had you bothered to search this forum (as forum etiquette would dictate) before posting.
    In any case, I hope that your problem was solved.

  • Problem with Maintenance Optimizer after first step

    Hi all,
    I have problem with Maintenance Optimizer after I choose system and save transaction, I click on Continue button, but nothing happens....
    Any ideas?
    Regards,
    Lazar Hristov

    I resolved my problem.
    I activate from spro -> Initial Configuration II, then activate BC Set for mopz and now everything works fine.
    Regards,
    Lazar Hristov

  • I am having problem with my sound, after i updated to ios 6, apple please help

    i am having problem with my sound, after i updated to ios 6, i can hear music with headphone only, apple please help

    Try going into your settings and 'reset all settings'
    You will need to retweak your device but it's been said to help with sound issues.

Maybe you are looking for