Problems with Seeburger FTP Receiver adapter

Hello,
I am working on a scenario sending ORDERS05 Idocs to EDI vendors.
For this i have configured Seeburger Receiver FTP adapter with 2 modules to convert XML-EDI format. Since this is the test, I have pointed Seeburger to local FTP server with following settings
Hostname <Hostname of our FTP server>
Port <Port # of our FTP server>
Host Path/VAN partner id <some local directory of FTP server>
Payload mode: Maindocument.
At runtime i received following exception
Message could not be forwarded to the JCA adapter. Reason: Fatal exception: javax.resource.ResourceException: >> Description: com.seeburger.jftp.app.exception.FtpExceptionSoftProcessingError: Unexpected reply: 500 'SITE system 1': command not understood>> Details: com.seeburger.jftp.app.exception.FtpExceptionRethrowError: Error in session: {type:FTPConnectionId}{binding:82ea8d3089dc3e898ae2e608d9d8487d}{channel:a52d1aaa8dd63ff59c2f590e78586a77}{toparty:TestEDIParty} CAUSED BY: com.seeburger.jftp.app.exception.FtpExceptionOpenConnectionError: Error while connection to remote host CAUSED BY: com.seeburger.jftp.app.exception.FtpExceptionRethrowError: Error while executing command QUOTE site system 1 CAUSED BY: com.seeburger.jftp.app.exception.FtpExceptionSoftProcessingError: Unexpected reply: 500 'SITE system 1': command not understood>>SendingStatus: NOT_TRANSMITTED>>FaultCategory: COMMUNICATION_ERROR>>Retryable: true>>Fatal: true
Few questions related to this
1] can we use Seeburger adapter to generate EDI files on local FTP server
2] If not Seeburger can we use normal File adapter to do the same. I tried the same by configuring BIC module in File adapter so that it would convert XML to EDI format and was hoping file to be generated on FTP server. It generated one line XML file with following text "<info>Converted message locates in a attachment</info>". Any idea how to retreive attachments in File receiver adapter (as far as i know no attachments are supported in File receiver adapter).
Any idea how to generate EDI files with Seeburger FTP on test server?
Thanks in advance.
Regards
Rajeev

Hi Rajeev,
> 1] can we use Seeburger adapter to generate EDI files on local FTP server
Yes we can use.
> Any idea how to generate EDI files with Seeburger FTP on test server?
It is like a normal process, how to generate the EDI files in normal means without FTP. Check this link
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10b17369-9522-2c10-84a6-d75d8a8ace22
BIC
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00b66651-eeea-2b10-e5a6-8459ec30d948
Regards
Ramesh

Similar Messages

Configuring a Seeburger FTP Receiver Adapter

Hello,
I am trying to build a scenario where SAP ECC 6 sends an invoice to a customer via EDI.
We are using ECC 6.0 and PI 7.0 and the Generic Seeburger EDI Adapters. The VAN is a GEIS EDISWITCH VAN (Eircom in Ireland).
I am able to successfully send an IDoc from ECC 6 and into PI where a Seeburger map converts the message to EDI-XML format. I can use a file adapter to create a file in normal EDI format. But I can't get the Seeburger FTP adapter to work with the VAN.
I have configured the correct IP, port, username and password but I keep getting the following message when the communication channel tries to send the message:
<h6>Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: >> Description: com.seeburger.jftp.app.exception.FtpExceptionSoftProcessingError: Unexpected reply: 501-Syntax errors in parameter. usage: %[recipient id]%[APRF] where either [recipient] or [APRF] can be omitted. (to change your current default SEND relationship). %% (places you in your 'HOME' TR). &['s'|'single'] ('get' command gets single file). &['m'|'multiple'] ('get' command gets multiple files). >> </h6>
The FTP session is expecting a PUT command with the recipient id and APRF as parameters but these are not getting passed. I suspect this is because I am not passing the correct variables to the receiver adapter but I don't know what variables it expects and where they should be specified. And I can't find the answers in the documentation.
Can anyone shed some light on what I need to do?
Thanks,
Ben

Hi Prateek,
Thanks for your comments. The channel is set to GEIS(GeMarkIII). There is nowhere to specify a directory or filename. The settings I have used are as follows:
Adapter Type: FTP (http://seeburger.com/xi)
Receiver
Transport Protocol: FTP
Message Protocol: GEIS/GeMarkIII
Adapter Engine: Integration Server
Host name: <IP address of VAN server>
port: 21
User Id: <Our mailbox number>
Password: <Correct password>
Host path/VAN Partner ID: <blank>
Script file: <blank>
Transfer type: ASCII
Connection mode: Passive
Use keep alive: <Not checked>
Security Mode: None
Proxy Mode: none
Resource ID: <blank>
Deliver transmission report: <not checked>
Payload mode: Attachment
Attachment ID: SeeburgerMain
Channel status: Active
Use dynamic attributes: <Checked>
Use non-empty attributes: <Checked>
Request displayed report: <Not checked>
Request dispatched report: <Not checked>
Report timeout (minutes): 720
Handle received reports: Refer reports to XI system
There is nowhere in the communication channel configuration that allows me to specify the receiver ID or the APRF. The documentation say this is read from the EDI data and the relevant fields are populated.
Any ideas?
Thanks,
Ben

Problem with Variable Substitution Receiver Adapter

Hi,
I need to use a dynamic filename so I'm using the variable substitution in my receiver adapter. BUT, the filename can't appear in the file. So i used this blog in reference --> Solution to the problem encountered using Variable Substitution with XI-SP12
The PROBLEM is I still get and extra blank line in the file. How can I eliminate this extra line?
Thanks in advance.
Using XI 7.0

Hi Gaurav,
Data Type:
Lines
Line
Config
FileName
XML - example:
<?xml version="1.0" encoding="utf-8"?>
<nr1:MT_TP_TipoCambio_Detalle_ECC_Req xmlns:nr1="urn:erplatam/tipocambio:tp:ecc">
<Lines>
<Line>USDSOL0000000000003.10000013-09-200813-09-2008V</Line>
</Lines>
<Lines>
<Line>USDSOL0000000000002.50000014-09-200814-09-2008V</Line>
</Lines>
<Config>
<FileName>SIGMA_TCSAP_F081031.DAT.TXT</FileName>
</Config>
</nr1:MT_TP_TipoCambio_Detalle_ECC_Req>
Output - File, has 3 lines should have only 2:
USDSOL0000000000003.10000013-09-200813-09-2008V
USDSOL0000000000002.50000014-09-200814-09-2008V
FCC parameters:
RecordSet Structure: Lines,Config
Lines.fieldSeparator 'nl'
Lines.endSeparator 'nl'
Config.fieldSeparator 'nl'
Config.endSeparator 'nl'
Thanks in advance!

Problem with the Mail receiver Adapter

Hi,
I am getting follwing Errors.
Activation of the change list canceled
Check result for Receiver Agreement
Field compressZLIBEncryptionSignatureEncryption is obsolete
Field encryptionAlgorithmEncryptionEncryptionSignature is obsolete
Field clearDataSignature is obsolete
Field compressZLIBEncryptionEncryptionSignature is obsolete
Field addCertificatesSignature is obsolete
Field addCertificatesSignatureSignatureEncryption is obsolete
Field addCertificatesSignatureEncryptionSignature is obsolete
Field SMIMEProfileApply is obsolete
Field encryptionAlgorithmEncryptionSignatureEncryption is obsolete
Field compressZLIBEncryption is obsolete
Field encryptionAlgorithmEncryption is obsolete
Any help would be appriciated
With thanks

not much sure abt this error: but u can check with these blogs:
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure
/people/community.user/blog/2006/09/07/email-reporting
/people/community.user/blog/2006/09/08/email-report-as-attachment-excelword
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
will keep u posted

Wrong port in FTP receiver adapter - no errors in message monitoring?

Hello all
We're on XI 3.0 SP16 and have created / configured a HTTP XML -> XI -> FTP Server scenario. In the receiver comm. channel (ftp) we had specified a wrong port number and always wondered, why we never got errors in message monitoring. Everything seemed to be processed correctly... but no file arrived on the FTP server (receiver) side!
After correcting the wrong FTP port number in the receiver FTP comm. channel everything went fine.
We now encountered a similar problem with a RFC receiver adapter. We're using it in another scenario HTTP XML -> XI -> RFC to SAP R/3 (4.7).
For some reason it died (red status in adapter monitor) and it was no more possible to do RFC calls from XI to SAP R/3 (normal RFC adapter, NO proxies).
In XI message monitor everything seemed to be ok but no message arrived till SAP R/3. Nothing in any queue...
After deactivating and reactivation the RFC receiver comm. channel it worked again BUT ALL PREVIOUSLY SENT messages seem to be lost.
Is it really the way it works? Does XI integration engine at runtime NOT catch whether or not a RFC or FTP receiver adapter died, thus is not able to tell somewhere in message monitor that a message could not be delivered at all?
I'm really confused here but hopefully I simply don't understand some easy principles to take into account...
Our SAP R/3 is on rel. 4.70 with Web AS 6.20. The XI 3.0 plugin is not installed. Do we need to go with server proxies there and use QOS = best effort?!?
Thanks for some suggestions.
Best regards,
Renaud

Hi Michal
Thanks... works great for normal XML based messages!
Now, what if I wanted to pass binary files from one ftp server via BPM to another ftp server in order to enable the transport acknowledgment?
The files polled from ftp server using the ftp sender adapter are all in binary format (ARJ). No xml data in there. How should the message format look like in BPM for the receiving step? Or: how to make sure not to loose the binary content when passing through BPMs?
I need this sort of scenario because of the tansport acknowledgment and because I need to have some sort of message splitting (send the binary file over to a second ftp server and additionally send some kind of info message to SAP R/3 regarding thin binary file).
BTW: in the MessagingSystem/monitor/monitor.jsp I do not see sender / receiver information. Is this normal? It's quite of a bad thing to look inside each message in order to find out what message I'm having in front of me...
Thanks a lot for your support and patience!
Kind regards,
Renaud

Issues with Seeburger FTP adapter

Can one of you with Seeburger FTP adapter experience share some information on these issues I'm facing
1. Do I need to setup resource management in Seeburger workbench. If so, do I need to configure, resource, server and reservations. Do you have more information and what parameters I need here.
2. In the Seebuger FTP adapter, I have
Module Key - exit
Parameter Name - JNDIName
Paramter Valu - deployedAdapters/SeeXIFTP/shareable/SeeXIFTP
JNDIName, should I be replacing this with some other name. I'm trying to get Seeburger FTP to work and in the messaging monitor, I see the message as passed to Module Processor but it does go anywhere from there.
Can one you throw some light on this subject...what to expect from this definition.
Thank you for all your replies,
Parimala

I'm resending this since I did not have any luck with it the first time.
We also have an oss note waiting to be responded on this subject.
When I send messages using Seebuger FTP adapter, I see the following information in the SAP message monitor -
"Message entered module processor exit bean and will be transferred to JCA adapter".
But does not get to IBM VAN mailbox. How do I trace from this point onwards.
Should I use Seeburger monitoring tool for this? If so, I don't see anything in Seeburger monitoring (used all criteria).
Please let me know if you have any information on this subject.
Thanks,
Parimala

FTP receiver adapter does not transfer (STORE) file

Hello gurus,
In my scenario I want to transfer files from server X to server Y using FTP.
To get the files from server-X I use the FTP sender adapter, to put the files on server-Y I user the FTP receiver adapter.
Getting the file (QoS = EOIO) is not a problem; I see the result is SXM_MONI.
Putting the file doesn't seem to work; I don't have an error message in SXMB_MONI but the file is not physical stored on server-Y.
When I monitor server-Y I see that XI connects with the configured user/pwd and even creates the directory when it doesn't exist but the file is not STORED.
I'm not using the BPE, this is a very simple and basic scenario: what comes in, goes out.
Can you please advice what might be the cause of the strange behavior?
Many thanks - Danny

Hello Michal, thanks for your (very) quick reply.
this is the result:
1) adapter monitoring
<b>Status to be delivered:</b>
- Message successfully received by messaging system. Profile: XI URL: http://xdsci.cie.etat.lu:53100/MessagingSystem/receive/AFW/XI Credential (User): XIISUSER
- Using connection File_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
- Message successfully put into the queue.
2) sxmb_moni
- no error
3) communication channel monitor
- Message successfully received by messaging system. Profile: XI URL: http://xdsci.cie.etat.lu:53100/MessagingSystem/receive/AFW/XI Credential (User): XIISUSER
- Using connection File_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
- Message successfully put into the queue.
- The message was successfully retrieved from the receive queue.
- The message status set to DLNG.
- Delivering to channel: FTP_receiver
- MP: entering
- MP: processing local module localejbs/CallSapAdapter
- File adapter receiver: processing started; QoS required: ExactlyOnce
- File adapter receiver channel FTP_receiver: start processing: party " ", service "xyz"
Any idea?

Problem with Send and Receive Emal In SAP System

Hi gurus!
I have a following quote:
Dear !
I have a problem with send and receive email in SAP system following :
I want to test send and receive email in local network at my company. I
had two server
Server 1 : I setup Exchange Mail Server 2007 with domain controller is
fes.com
Server 2 : I setup SAP ERP ECC 6.0
On Server 1 : I created 2 account ( u1Afes.com and u2Afes.com ) and then I tested send and receive email between u1 and u2 in local network through Microsoft Outlook 2007 -> OK
and then
On Server 2: I had configured send and receive email on SAP system
through tcode SBWP, SCOT and SOST as Note 455140 - "Configuration of
e-mail, fax, paging or SMS using SMTP"
for example :
I logged in SAP system with user Basis01 (with email u1Afes.com ) -> then,using tcode SBWP -> new message -> send to u2Afes.com with Internet Mail type and then status message with green light -> sending ok
and then I have used Microsoft Outlook 2007, I logged with account u2 ->check email -> Ok. I saw message which send from u1
Finally, My problem is how can receive mail in SAP system without using Microsoft Outlook
For example:
Login system SAP with Basis01 account (with u1Afes.com ) -> tcode SBWP ->New Message -> send to u2Afes.com
and then
Login system SAP with Basis02 account (with u2Afes.com ) -> tcode ??? ->
To receive email from Basis01 (with u1Afes.com )
Please help me now
Thanks
I replace "@" with "A" because of banning email of this forum.
This quote is about sending email in local network. And we can't receive any email from the outside email address. Addition if I wanna send email to internal email in Internet (we've just tried with email address in local network) What should I config in SAP and Exchange ?
By the way, Is SAP Server IP added to Relay Agent for sending or receiving mail ?
Regards
An NLP
Edited by: An NLP on Apr 6, 2010 7:03 PM

Hi,
This problem is a classic problem of mail routing via Exchange. Exchange like most mail servers use the domain part of the email address as a means to route mails. So I will make an assumption that your main company mail addrss is "User @ fes.com".
So when you send a mail to the "User @ fes.com mail" address the mail is delivered to your Outlook mail address as this is the default route for company.
(Q) So how do you get your Exchange server to relay the mail into the sending SAP system?
(A) The easiest way would be to setup and unique mail domain for your SAP system. I always recommend "user @ client.sid.company.com" which in your case would be "u1 @ 100.PRD.fes.com". You can then instruct Exchange to send any emails addressed to 100.PRD.fes.com domain to your SAP system. Also using this format of address you can configure multiple mail connections into multiple SAP systems.
(A) Another answer would be to enter the "Full" email address (LOcal and Domain part of address) into the routing rule for Exchange e.g. "U1 @ fes.com" so that all emails addressed to this user will be delivered into SAP. However this method requires a lot of Admin as you will have to update Exchange with ALL email address that need to receive emails. Also if your corporate mail address is "U1 @ fes.com" then all mails will be forwarded to SAP.
I would definitely NOT recommend this method but the decision is up to you.
P.S. The IP address of the SAP system is entered into the mail header of the email. This is standard practice in SMTP relay. You can suppress this header in Exchange
Hope this helps
Michael

Problem with sending and receiving e-mail through exchange [GMail]

Hello I have problem with sending and receiving e-mail.
all is well set, username and password are correct, the server set m.google.com. verification of data is about like stepping into a post and want to check the post office gives me an error message: Can not Get Mail. The connection to the server has failed
I have this problem on my two iPhone

http://www.zdnet.com/google-drops-exchange-activesync-support-for-free-email-acc ounts-7000008836/

Filename from payload - FTP receiver adapter

Hello everyone!
I have a scenario wherein I need to get the value from a field coming from an IDOC and then give that value as the "filename" of the file that is saved in the FTP folder.
IDOC > XI > FILE
For example, if /ORDERS05/IDOC/E1EDK02/BELNR = 620000123
then I want the name of the file to be saved in the FTP folder to be 620000123.xml
I understand you may use the 'variable substitution' property in the FTP receiver adapter, but subsequent attempts at trying to configure that property have resulted in errors. Can anyone help me out?
Warm regards,
Glenn

do u have recordset name (root message)
For Ex: If you want to refer to the field which is bold
below is your variable substuition:
payload:root,1,e1,1,e2,2
<?xml version="1.0" encoding="UTF-8" ?>
<root>
<dummy>
     <e1>
        <e2>Data_1</e2>
        <f/>
       <g attr="abc">text</g>
        <e2>Data_2</e2>
     </e1>
</dummy>
<e1>
     <e2>illegal/value</e2>
     <f/>
     <g attr="abc">text</g>
     <e2 attr="fghij">Example Value</e2>
   </e1>
</root>
Similarly
for your strucutre:
<MS_MT>
<order>
      <number>
the variable substuition would be
payload:MS_MT,1,order,1,number,1
you have to give complete XML to arrive to this value.

FTP Receiver Adapter.

Hi All,
From XI I need to FTP file to outer system using
FTP Receiver Adapter
Now due to security reason my client wants to use FTPS
I checked in FTP Receiver Adapter -- there is an option
Connection Security -- FTPS (FTP Using SSL/TLS) for Control Connection.
Can I select this option and use like simple FTP Receiver Adapter?
Please tell the process/docs for it.
Regards
<Moderator note: Subject edited. Please do not use 'Urgent'. See the [Rules of Engagement|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement] for further info.>
Edited by: Mike Pokraka on Jul 25, 2008 8:47 AM

Hi,
check some links on FTPS.
FTPS Sender and FTPS Receiver adapter. Pls help
SFTP vs. FTPS in SAP PI
http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/964f67ec-0701-0010-bd88-f995abf4e1fc
Regards,
Phani

Use temporary file in FTP receiver adapter

Hi guys,
I'm not getting the purpose of "use temporary file" in FTP receiver adapter. Can you describe any situation, where this should be used?
What is the location of this temporary file?
Is it deleted after "normal" file is created?
Thanks a lot,
Olian

> I'm not getting the purpose of "use temporary file" in FTP receiver adapter. Can you describe any situation, where this should be used?
Some times when you create the file on your target dir then if there is another application looking for same file is quite faster to pick the file before it is complety written on target dir then in this situation using temporary file option is very helpful. What it does, it simply creates the file first by using temporary name once all bytes or bits has been transfered then it creates the original name and the temp file get deleted.
> What is the location of this temporary file?
Same location, where your original file is suppose to be written.
> Is it deleted after "normal" file is created?
Yes.
Regards,
Sarvesh

Problem whit FTP receiver adapter

Hello..
i have a very strange problem.
I created 2 similar interface Idoc-XI-File (via FTP) whit file content conversion.
I configured in both cases the comunication channel but only in one case work correctly.
The second channel create the file but just whit the first field.
I check all monitor. the configuration is correct (field name and lenght). the messages in adapter monitor is:
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_SPEDI_DESADVUT xmlns:ns0="http://sabaf.it/edi">
- <ROW>
- <POSITION>
<TIPO_RECORD>CA</TIPO_RECORD>
<NUMERO_BOLLA>1111111111</NUMERO_BOLLA>
<DATA_BOLLA>20080611</DATA_BOLLA>
<CODICE_AA>M0</CODICE_AA>
<CODICE_AB>MA</CODICE_AB>
<CODICE_AC>DT</CODICE_AC>
<CODICE_AD>SA</CODICE_AD> .....
but the result file is:
CACA
Configuration of content conversion in adapter is:
POSITION.fieldNames TIPO_RECORD,NUMERO_BOLLA,DATA_BOLLA,CODICE_AA,CODICE_AB,CODICE_AC,CODICE_AD
POSITION.fieldFixedLengths 2,10,8,2,2,2,2
any suggestion?

Hi.
If you disable content conversion in ftp receiver...the output is ok? does it contains all required/expected fields? try to disable the file content conversion using the same example data that does not work when FCC is enabled.
Regards,
Matias.

Problem on FTP receiver adapter

Hi, All,
I have two scenarios, both from XI SAP proxy to FTP receiver. And two scenarios are running almost at the same time. I need to send thousands of messages through these scenarios. Now I got problems when I sent out around 300 messages. The messages just stuck there and don't get through to FTP receiver communication channels. I configured these two FTP receiver communication channels in one Business System. I don't if that causes the problem. Please advise. Thanks a lot.
Jack

Hi! Jack,
According to my Understanding Check once again the below steps..
1. Check both Queues regarding SMQ1 and SMQ2.
2. Another thing is got to Communication Channel monitoring and select your Channel and check AUDIT
   LOG and ADD TIME STAMP such that u can get 2 things.
         a) first of all one information that up to at what time XI got picekd the file and
         b) Also u can observe another point that whether the File got picked from Source and holding in XI or else stil the XI doesn't got picked.
3. The most important thing is You asked how to clear all the queues right ? U can delete queues in two ways.
       a) U can go to SMQ1 and SMQ2 and delete the queues there it self
       b) THere is another way to monitor the XI MESSAGES in detail view by search category in
            ASYNCH and SYNCH mode and also based on ERRORS..
Note:: In order to monitor you need to check the monitoring on SYSTEM.JSP level. Go through the below linik.
http://HOSTNAME:PORT/MessagingSystem/monitor/systemStatus.jsp
THere u can get each and every messages and u can clear the BULK of messages in queue.
Regards:
Amar Srinivas Eli

Problem with XML SQL JDBC adapter

Hello All.
I have quite strange problem with my PI.
Whole scenario is SOAP -> JDBC, asynchronous. Everything works fine on DEV server. After transporting objects (using CTS) to QA env I'm getting this error:
JDBC Message processing failed, due to Error processing request in sax parser:
No 'action' attribute found in XML document
(attribute "action" missing or wrong XML structure)
But document seems to be correct. I've compared it to DEV server documents - they are identical. What could be wrong??
Document looks like this:
<ns2:BIPMessage xmlns:ns2="http://mynamespace.com/xi/sn"
xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<synchSlLok>
   <STATEMENTNAME>
     <SYNCH_SL_LOK ACTION="INSERT">
        <TABLE>SYNCH_SL_LOK</TABLE>
         <ACCESS>
            <ID_TRANS>22050</ID_TRANS>
            <ID_LOK>1234</ID_LOK>
            <ID_CBK>1000050911</ID_CBK>
            <NR_LOK>1234</NR_LOK>
            <OPIS_LOK>12312312312312</OPIS_LOK>
            <TYP>D</TYP>
            <OPERACJA>U</OPERACJA>
          </ACCESS>
      </SYNCH_SL_LOK>
    </STATEMENTNAME>
</synchSlLok>
</ns2:BIPMessage>
TIA
Best Regads
Maciej

Hi,
i was also facing the same error few days back in a JDBC -RFC-JDBC Synchronous scenario. In that scenario, i was using 2 modules in JDBC sender module tab. It was working fine. later i change polling interval and then i started getting same error. it happened coz of sequence of Module got changed somehow.
So please check in Receiver JDBC adapter and SOAP sender adapter CC if anything is changed. If this scenario is working in DEV as it is then it should work after transport.
Else have a look here
Re: attribute "action" missing or wrong XML structure
JDBC - No 'action' attribute found in XML document - error
Regards
Aashish Sinha
Edited by: Aashish Sinha on Mar 15, 2011 10:42 AM

Problems with Seeburger FTP Receiver adapter

Similar Messages

Maybe you are looking for