Problems with sending a report to a non-default printer

When sending Escape-codes to a non-default Windows printer the printer doesn't accept them.
For example sending a report to a fax-printerdriver which is not set as default doesn't seem to work.
It's therefor also not possible to send a report to a non-local printer (non-default) which contains invoicepaper and that needs it's paperlength to be adjusted.
I hope someone can help me to solve this problem.
Gijs van Kooten

hello,
it is kind of hard to determine your exact problem without any further information.
however, it might be a good idea afterall to contact oracle support services in this matter.
regards,
the oracle reports team --pw

Similar Messages

Send 10g reports directly to the default printer of the client machine

Hello..
We are using Oracle DS10g and Forms & Reports service 10g. When the user clicks on the report button I want to send the report directly to the default printer installed in the client machine. In this case the printer name may vary and I cannot parameterize the DESNAME parameter. How do i know what is the default printer? Any clue as to how can achieve the desired result?
Thanks

If you use webutil in your shop. You can use the CLient_win_api_environment.read_registry to get the default printer. In the run_report_object, desname gets set to the default printer.
This can also be found in metalink.
               V_PRINTER := CLIENT_WIN_API_ENVIRONMENT.READ_REGISTRY('HKEY_CURRENT_USER\software\Microsoft\Windows NT\CurrentVersion\Windows','Device',TRUE);
               V_PRINTER_LENGTH := LENGTH(V_PRINTER);
               V_PRINTER_BLANK :=     INSTR(V_PRINTER, ',');
               IF V_PRINTER_LENGTH > 0 AND V_PRINTER_BLANK = 0 THEN
                    :P_OUTPUT_FILE := V_PRINTER;
               ELSIF V_PRINTER_LENGTH > V_PRINTER_BLANK THEN
               :P_OUTPUT_FILE := SUBSTR(V_PRINTER, 0 , (INSTR(V_PRINTER, ',')-1 ));
               END IF;

Problem with Send and Receive Emal In SAP System

Hi gurus!
I have a following quote:
Dear !
I have a problem with send and receive email in SAP system following :
I want to test send and receive email in local network at my company. I
had two server
Server 1 : I setup Exchange Mail Server 2007 with domain controller is
fes.com
Server 2 : I setup SAP ERP ECC 6.0
On Server 1 : I created 2 account ( u1Afes.com and u2Afes.com ) and then I tested send and receive email between u1 and u2 in local network through Microsoft Outlook 2007 -> OK
and then
On Server 2: I had configured send and receive email on SAP system
through tcode SBWP, SCOT and SOST as Note 455140 - "Configuration of
e-mail, fax, paging or SMS using SMTP"
for example :
I logged in SAP system with user Basis01 (with email u1Afes.com ) -> then,using tcode SBWP -> new message -> send to u2Afes.com with Internet Mail type and then status message with green light -> sending ok
and then I have used Microsoft Outlook 2007, I logged with account u2 ->check email -> Ok. I saw message which send from u1
Finally, My problem is how can receive mail in SAP system without using Microsoft Outlook
For example:
Login system SAP with Basis01 account (with u1Afes.com ) -> tcode SBWP ->New Message -> send to u2Afes.com
and then
Login system SAP with Basis02 account (with u2Afes.com ) -> tcode ??? ->
To receive email from Basis01 (with u1Afes.com )
Please help me now
Thanks
I replace "@" with "A" because of banning email of this forum.
This quote is about sending email in local network. And we can't receive any email from the outside email address. Addition if I wanna send email to internal email in Internet (we've just tried with email address in local network) What should I config in SAP and Exchange ?
By the way, Is SAP Server IP added to Relay Agent for sending or receiving mail ?
Regards
An NLP
Edited by: An NLP on Apr 6, 2010 7:03 PM

Hi,
This problem is a classic problem of mail routing via Exchange. Exchange like most mail servers use the domain part of the email address as a means to route mails. So I will make an assumption that your main company mail addrss is "User @ fes.com".
So when you send a mail to the "User @ fes.com mail" address the mail is delivered to your Outlook mail address as this is the default route for company.
(Q) So how do you get your Exchange server to relay the mail into the sending SAP system?
(A) The easiest way would be to setup and unique mail domain for your SAP system. I always recommend "user @ client.sid.company.com" which in your case would be "u1 @ 100.PRD.fes.com". You can then instruct Exchange to send any emails addressed to 100.PRD.fes.com domain to your SAP system. Also using this format of address you can configure multiple mail connections into multiple SAP systems.
(A) Another answer would be to enter the "Full" email address (LOcal and Domain part of address) into the routing rule for Exchange e.g. "U1 @ fes.com" so that all emails addressed to this user will be delivered into SAP. However this method requires a lot of Admin as you will have to update Exchange with ALL email address that need to receive emails. Also if your corporate mail address is "U1 @ fes.com" then all mails will be forwarded to SAP.
I would definitely NOT recommend this method but the decision is up to you.
P.S. The IP address of the SAP system is entered into the mail header of the email. This is standard practice in SMTP relay. You can suppress this header in Exchange
Hope this helps
Michael

Problem with sending and receiving e-mail through exchange [GMail]

Hello I have problem with sending and receiving e-mail.
all is well set, username and password are correct, the server set m.google.com. verification of data is about like stepping into a post and want to check the post office gives me an error message: Can not Get Mail. The connection to the server has failed
I have this problem on my two iPhone

http://www.zdnet.com/google-drops-exchange-activesync-support-for-free-email-acc ounts-7000008836/

I recently upgraded to Firefox 13.0.1 and I'm operating a Mac Powerbook Pro with OS of 10.6.8 (Snow Leopard). Now I'm having intermittent problems with sending

I recently upgraded to Firefox 13.0.1 and I’m operating a Mac Powerbook Pro with OS of 10.6.8 (Snow Leopard).
Now I’m having intermittent problems with sending emails where Firefox freezes up. There is often a yellow warning above suggesting 32-bit mode, sometimes I can click to shift it that way, sometimes not.
Anyone having these problems?
Any suggestions?

I recently upgraded to Firefox 13.0.1 and I’m operating a Mac Powerbook Pro with OS of 10.6.8 (Snow Leopard).
Now I’m having intermittent problems with sending emails where Firefox freezes up. There is often a yellow warning above suggesting 32-bit mode, sometimes I can click to shift it that way, sometimes not.
Anyone having these problems?
Any suggestions?

Problem with exporting a report to excel vial citrix server

Hi,
We are encountering a problem with exporting a report to excel through ALV local file icon.A spread sheet is downloading only one row (From header) instead of many rows from the ALV output .
Above is working fine for the GUI installed on my PC, but not throgh the Citrix server.
Can any body have idea on above mentined?
Regards,
SK.

I understand that you're trying to download the file to a local computer through Citrix. In this case you need autorizations in Citrix for your user ( CItrix user)

Mail and iPhoto Problems with sending photos.

Mail and iPhoto Problems with sending photos.
I have this problem that started a while ago and seems to be getting worse.
Here are the different scenarios.
-If I try to share a photo to email within iPhoto, it will insert the image file name in the mail message, but no image icon or opened image. In iPhoto Preferences under General I have chosen to use Email Photos using Mail.
-If I choose to use iPhoto to send the photo, it will compose the message and the photo is viewable. If I send the message i can view the photo within the email I sent to myself. Nothing happens when I double click on the photo in the Mail message. Nothing happens when i control click on the photo in the mail message. Nothing happens when I try to drag the photo to the desktop from the mail message. When I try to save attachments from the email and choose a place to save it, the save button is grayed out and it cannot be saved. When I check the mail message it says there is an attachemnt but there is no file size listed.
-If I use the stationary within Mail app I cannot drag a photo into the placeholder, I get a circle with a line through it symbol when I try. It happens if I try to drag a photo from the desktop or from the media browser within Mail app.
-If I drag the photo to the desktop from iPhoto, I can double click it on the desktop and it will open in Preview.
-If I then control click on the same photo on the desktop and scroll to share/email, the generic photo icon will be inserted in the mail message. If i double click the photo icon in the mail message I get a message it can't be opened because it is empty.
-If I drag that same image to the mail message body the same thing happens.
-If I send that email to someone they cannot open the image file.
What I can do:
- I can drag that same image file on the desktop to my dropbox folder and it will upload. From there I can go on my iPad and download the photo and send it through email just fine.
-I can open the same image file on my desktop in Preview, I can copy and paste it into a mail message and the image will be viewable in the mail message by me and by the recipient.
-I can drag that same image on the desktop to my safari browser window and it will be viewable in the page. i can then copy and paste that image into a mail message and it is viewable in the message. I can then send that email message to myself and i can control click on the image and get all my options. It also shows as an attachment with the size of the image file in the mail message.
I can send that message to someone and they can see the photo and open it fine.
-If I send that same email to me I can see the photo within the mail. If I then drag that photo to the desktop I cannot use it again to put in an email as the same problem happens again.
I have tried all scenarios in my user account, another users account and in a guest account. The same happens in all. I am guessing because of this it is not a corrupt preference file, unless all of the preference files are corrupt. The guest user account I added a new email account so it was brand new and still had the problem.
I am stumped, all and any help is appreciated.

Another problem that may be related….
I have Snapz Pro. I used to be able to save the snaps to my desktop or a folder. Now when I take a screenshot and try to save the file to my desktop or a folder on my desktop I get this message "Files cannot be created in the selected location. You do not have permission to write to the selected location. Please choose a different location." I have found that i can only save the file to the clipboard. I have repaired permissions many times and still I have this problem.

Problem with the crystal reports XI

Portuguese
Boa Tarde, tenho um problema com o cristal reports XI.
ele esta em producao fazendo a consulta em um servidor mas quando eu acesso passando parametro connectionInfo.ServerName = <endereco do servidor> para um servidor de teste pelo VStudio 2005, ele nao busca os dados deste e continua acessando o servidor de producao.
gostaria de saber como consertar isso
English
Good afternoon, I have a problem with the crystal reports XI. him this in production making the consultation in a servant but when I access passing parameter connectionInfo.ServerName = I address of the servant > for a test servant for VStudio 2005, he doesn't look for the data of this and it continues accessing the production servant.

Fabiano, here is what I understand of the issue:
1) You are using CR XI (I am not sure if release 1 or release 2)
2) you are using .NET 2005
3) you are trying to change the server name, but the report keeps giving you data from the original server
Please answer the following:
1) Are you using CR XI release 1 or release 2?
2) Can you change to the new server, using the Crystal Reports Designer?
3) Can you duplicate the issue on your development computer?
4) What Crystal Reports service pack are you on?
5) Are you connecting to the database using OLE DB?
Ludek

Problem with sending sms - nokia x3

Hello,
I've got a problem with sending sms in my nokia x3 - actually with recently used number. I sent messages, but the list is the same. There is only one number although I used many more. I removed this number from the list, but is still here. I also tried to turn off the phone and pull out the battery, restart factory setting but there's no change.
Could somebody help me, please?
p.s. Sorry, but my english isn't well. I hope the post is understood

Check if there is any relation with the LOG... When you clear the log.. (selecting ALL).. is it removing details from the RECENTLY USED too...
To confirm this select Clear Log.. and check if that one no. you are talking about still remains or not.. If its no more there means you must have cleared the log just before using the last no. that is appearing..
--------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

Problems with sending via url

Hi there, I've got a problem with sending via an URL. If I send and receive something I use a method called connect. This method works well, I construct a URL, connect and receive an ObjectStream.
But as I only want to set some values in another use case I do not want to receive anything,
But it doesn't work - my servlet does not receive any request.
Could anyone please help me to solve this?
Thank you.
Regards
Tarik
private synchronized static void connectOneWay(String data)
            throws IOException, ClassNotFoundException {
        try {
            URLConnection connection = null;
            URL testServlet = null;
            Class classLock = ServletConnector.class;
            while (locked)
                classLock.wait();
            locked = true;
            testServlet = new URL(servletURL + data);
            if (MMSCMSTree.debug)
                System.out.println("Servlet URL: " + testServlet);
            connection = testServlet.openConnection();
            connection.setDoInput(false);
            connection.connect();
            locked = false;
            classLock.notify();
        } catch (InterruptedException e) {
            e.printStackTrace();
        }

Hi
There was not a problem with this, the problem was on the server side, infinite loop ... :-)
Regards
Tarik

Problems with sending attachements.

Hello I've a problem with sending attachments.
I've got mail Version 5.0 (1244.2/1244.3) and Hosted Exchange (xs4all in the Netherlands). Most of my mail works fine (sending and receive mails).
The most irritating problem is I cannot send messages with a attachement even 1 KB.
Hope anyone can help?
Ohter synchronisation Calender & contacts are even not working fine - but a cable will help. So if anyone can help there to, I will be happy.
Thanks Vanessa

Im having same problem with BTINTERNET account email, tbh ive had issues with this from the start. keeps going on about yahoo *** is that about... could do with someone verifying settings ive done what all the website says but same issue....attachment is only 11.7mb surely thats not an issue.......anybody know whats going on????

Problems with sending/receiving picture messages

Does anyone know how to sort problems with sending/receiving picture messages on the iphone 4S? I've gone through all the re-setting etc at the place I bought it and it still doesn't work!! Spoken to 02 and they said it's an issue with Apple software?? Any help appreciated.

Can you send/receive SMS's? If so, and you can't send/receive MMS's, and MMS is turned on in Settings, 99.9% of the time the problem is on your carrier's end...most likely MMS is not provisioned properly on your account, regardless of what your carrier is telling you. Call back & have them remove MMS from your account & then re-provision your account for MMS.

Problem with send e-mail

Hello,
I have a problem with send e-mail.
When I create a new message, the e-mail is send for customer and me, but the description of message dont send with e-mail.
I have created a Smartform that send this e-mail and your context there is information for send this information.
When I do a modification in this message, when i put a new description, a description preview is send, but a new description dont send.
Can anyboby help me.
Thanks a lot.

Hi,
I already have created a development, but this found the description preview and not actual in run time.
Development:
read table gt_notif_type_text into gs_notif_type_text
with key type_text = gs_notif_text-type_text.
if sy-subrc <> 0.
clear gs_notif_type_text.
endif.
read table gt_notif_type_textt into gs_notif_type_textt
with key type_text = gs_notif_text-type_text.
if sy-subrc <> 0.
clear gs_notif_type_textt.
endif.
In the Smartform on acording abouve:
&gs_notif_type_textt-stxt()& &gs_notif_text-last_usr()& &gv_notif_textdate& &gv_notif_texttime&
Thanks.

Problem with sending text messages replies

After update to OS 3.0 I have problem with sending text messages:
- I CAN send new text message to someone but
- When someone REPLY me, then I CANNOT send next message in conversation
- If I DELETE someone's reply from that conversation text message sends fine.
Anyone have this problem? I have iPhone 3g with OS 3.0 update, previously on 2.x the problem didn't appear. Carrier Orange in Poland

no my girlfriend, was useing my old N75, now she is useing her old phone last night and today. we have been texting with no problems at all. ..so i'm back in the iphone, and we're going to get her a new phone tonight,or she's going to use one of my other back-up phones till we get one for her. called at&t today to see if she could get an early upgrade before oct. just to make me happy with all the BS i've been through (10 hours or more on the phone trying to fix the problem). but at&t came through with their great customer satisfaction!!! NOT!!! so, gonna try and get her a good phone out of contract and see after hers and mine are up might just jump from at&t. very unhappy with them as how they handled this whole thing.

Have been trying all weekend to upload Jpegs- either Send does not work or shows files uploading then shows error- never had this problem with Send Now-16 images total size 92MB-largest image 13MB

Have been trying all weekend to upload Jpegs- either Send does not work or shows files uploading then shows error- never had this problem with Send Now-16 images total size 92MB-largest image 13MB

Hi Ciaran19,
Are you sending files from the Adobe Send interface, Adobe Reader, or the Outlook plug-in?
Have you checked to see whether the files that you're sending appear in the Recent Files/Sent Files list when you're logged on to https://cloud.acrobat.com? (It could be that they're uploading, but not being sent.)
It would also be worthwhile to send the files in smaller batches, to see whether a particular file or files is problematic, and causing the error.
Please let us know how it goes. If you're still having trouble, please let us know where you're sending from, and whether you're able to send the files in smaller batches. It would also be helpful to know the exact error message that you're receiving.
Best,
Sara

Problems with sending a report to a non-default printer

Similar Messages

Maybe you are looking for