Problems with sending IDOC in tRFC.

Hi All,
I am sending IDOC to websphere from SAP.
Problem is very weird. All the IDOCs have status 03, but some of them never reach webshpere.
I checked SM58 and there are some tRFC entries for the same.
Following is the error there:
Check SAP Connector log. Error in BO Handler.
I think problem is after the data has been sent to ALE layer.
Can anyone suggest what can be the issue? And how can this be resolved.
Regards
Anuj

Hi Anuj,
As it seems like from the error message there is some problem with the way BO handler is responding to request BOs .
The base class to initialize the connector has been set properly though.
Check the log in SM21 on this and it might give you the detailed information.
Also check if you are passing the large objects, which might require some additional config.
Hope these pointers help in solving the issue.
Cheerio,
Disha

Similar Messages

Problems with sending IDocs into R/3 using BPM

Hi Vishnu,
as I have read the forum, you have experience with sending IDocs into R/3 from XI using the BPM.
Did you have problem, that this sending takes very long time?
My BPM splits the xml, sends IDoc into R/3 immediately, but the processing of the 2nd IDoc takes 6-10 minutes!
Do you have any idea, what could be wrong?
Thanx 4 answer, Peter

Vishnu, I was discussing this problem in another thread, but no helpful answer was sent, and I have read, that you have experience, so - just for explanation
Well,
yes, this situation is really strange.. New facts are:
when I send into XI XML, which is splitted in the BPM only into 1 IDoc, it is processed immediately. When I send there XML for 2 IDocs, the first is processed immediately, the 2nd starts immediately, but end of process is after 6-10 minutes, it depends... Then I tried to send there XML for 10 IDocs - and now attention please! 5 of them have been processed almost immediately, 5 of them after 8 minutes... The last test was with 16 items - 6 processed immediately, 10 after 10 minutes... And all these 10 minutes was my 4 processor XI box unavailable, with over 60% load... But finally the IDocs arrive!!
Any explanation???
This is really unbelievable situation!
Port name is SAPDEV, rfc destination DEVCLNT100
Actually, when I was creating the scenarion using the wizard and trying to add my communication channel(IDoc type) to receiver agreement, I got error - communication channel is not configured correctly, use another one. But somewhere I read, that I should create the receiver agreement manually. So I did.
To my BPM:
-receive MSG
-switch (but I'm testing only one branch now) - and the MSG message is always passed here, it's ok
-then I have transformation to MultiMSG (message with multiple DATA for multiple IDOCS)
-then comes the split mapping Multi2SingleMSG
-then ForEach Block with sending the Single MSG
this is the end of the BPM, and outside the BPM comes the mapping Single2IdocMSG and sending the IDoc into R/3
before I had the Single2Idoc mapping in the BPM, but thought, that this could be the bottleneck, so moved the mapping after the BPM... It didn't help...
So, what do you say?
Peter

Problems with sending IDOC via RFC from Unicode to NonUnic

Hello
I have following problem, sending an IDOC via RFC from Unicode to Non Unicode System. IDoc is not sent with error: codepage of receiver system cant determined. receiver destination was: Message no. B1999
I have tried different options in sm59, but it didnt help.
Any ideas? The recipient system is rather old, version 4.0

hey,
I had a similar experience. I was interfacing between 4.6 (RFC), PI and ECC 6.0 (ABAP Proxy). When data was passed from ECC to 4.6, RFC received them incorrectly. So i had to send trimmed strings from ECC and receive them as strings in RFC (esp for CURR and QUAN fields). Also the receiver communication channel in PI (between PI and RFC) had to be set as Non unicode. This helped a bit. But still I am getting 2 issues, truncation of values and some additional digits !! But the above changes resolved unwanted characters problem like "<" and "#". You can find a related post in my id. Hope this info helps..

Problems with sender IDoc scenario

hi experts..,
when i create message Interface for a Outbound Idoc my scenario is not working.
if i use idoc directly instead of message interface its working properly
And in Interface Determination if i gv interface mapping we are gting errors and without mentioning interface mapping in Configuration its is working fine
can any one explain me what is the reason for my two questions
thx in advance
john wesly

Hi,
I will explain one example by taking one IDOC
we have ORDERS05 Idoc and we are using the same Idoc for two scenarios
Scenario1 -
IDOC---File( FTP Server)
Scenario2----IDOC-JDBC
Now let us assume that we have configured two scenarios.
If we trigger the IDOC Orders05 from SAP R/3 means
1) The Idoc will be triggered and it will reach to XI.
Now your doubt is which Receiver will be take place and to be executed.
This time the problem my come or may not come, let it be like that.
If your requirement is like the above mentioned thing means
1) We can develop a single scenario like
IDOC-------File( FTP Server)
JDBC
Here what we have to do is when the idoc comes to xi we have route the Idoc to the particular receiver based on some condition in Receiver Determination
And one more thing is in mapping also if we have two mappings then we can use Interface determination based on condition which interface mapping to be execute.
I hope this clears yor doubt
Regards
Seshagiri

Problems with multiple idocs in one file ( Inbound file )

HI,
Thanks in Advance for your suggestions.. Highly appreciated.
We have problems with multiple IDocs in one file.
We are using XIB ( Amtrix ) as Middleware to receive the files.
Curretenly When the file contains one IDoc then there is no problem. IDoc is created and everything is ok.
If file contains two IDocs ( for example two messages ORDERS and DELVERY ) then it is creating two IDocs but both IDocs contains ORDERS plus DELIVERY segements information. That is the problem. Some how SAP unable to differentiate the IDocs in the file.. But it knows that how many idocs are there in the file..because it is creating exact number of idocs.
We are using TRFC port ... Do I need to change it to File port..
When we have more than one idoc do we need set any parameter in the file ...

Thanks for the swift response. Always ideas are useful.
As of now , Middleware cannot split the file.
Thing is SAP is creating two Idocs with different message types. Problem is First IDoc contains ORDERS message type but also DELIVERY segments as well. Second IDoc with DELIVERY message tyoe but ORDERS segments as well... This is the problem... I think we are missing some field activation in file for EDIDC record.
As far as I know file port supports the number of IDocs in one file.. Hope TRFC port also supports that

Problem with Send and Receive Emal In SAP System

Hi gurus!
I have a following quote:
Dear !
I have a problem with send and receive email in SAP system following :
I want to test send and receive email in local network at my company. I
had two server
Server 1 : I setup Exchange Mail Server 2007 with domain controller is
fes.com
Server 2 : I setup SAP ERP ECC 6.0
On Server 1 : I created 2 account ( u1Afes.com and u2Afes.com ) and then I tested send and receive email between u1 and u2 in local network through Microsoft Outlook 2007 -> OK
and then
On Server 2: I had configured send and receive email on SAP system
through tcode SBWP, SCOT and SOST as Note 455140 - "Configuration of
e-mail, fax, paging or SMS using SMTP"
for example :
I logged in SAP system with user Basis01 (with email u1Afes.com ) -> then,using tcode SBWP -> new message -> send to u2Afes.com with Internet Mail type and then status message with green light -> sending ok
and then I have used Microsoft Outlook 2007, I logged with account u2 ->check email -> Ok. I saw message which send from u1
Finally, My problem is how can receive mail in SAP system without using Microsoft Outlook
For example:
Login system SAP with Basis01 account (with u1Afes.com ) -> tcode SBWP ->New Message -> send to u2Afes.com
and then
Login system SAP with Basis02 account (with u2Afes.com ) -> tcode ??? ->
To receive email from Basis01 (with u1Afes.com )
Please help me now
Thanks
I replace "@" with "A" because of banning email of this forum.
This quote is about sending email in local network. And we can't receive any email from the outside email address. Addition if I wanna send email to internal email in Internet (we've just tried with email address in local network) What should I config in SAP and Exchange ?
By the way, Is SAP Server IP added to Relay Agent for sending or receiving mail ?
Regards
An NLP
Edited by: An NLP on Apr 6, 2010 7:03 PM

Hi,
This problem is a classic problem of mail routing via Exchange. Exchange like most mail servers use the domain part of the email address as a means to route mails. So I will make an assumption that your main company mail addrss is "User @ fes.com".
So when you send a mail to the "User @ fes.com mail" address the mail is delivered to your Outlook mail address as this is the default route for company.
(Q) So how do you get your Exchange server to relay the mail into the sending SAP system?
(A) The easiest way would be to setup and unique mail domain for your SAP system. I always recommend "user @ client.sid.company.com" which in your case would be "u1 @ 100.PRD.fes.com". You can then instruct Exchange to send any emails addressed to 100.PRD.fes.com domain to your SAP system. Also using this format of address you can configure multiple mail connections into multiple SAP systems.
(A) Another answer would be to enter the "Full" email address (LOcal and Domain part of address) into the routing rule for Exchange e.g. "U1 @ fes.com" so that all emails addressed to this user will be delivered into SAP. However this method requires a lot of Admin as you will have to update Exchange with ALL email address that need to receive emails. Also if your corporate mail address is "U1 @ fes.com" then all mails will be forwarded to SAP.
I would definitely NOT recommend this method but the decision is up to you.
P.S. The IP address of the SAP system is entered into the mail header of the email. This is standard practice in SMTP relay. You can suppress this header in Exchange
Hope this helps
Michael

Problem with sending and receiving e-mail through exchange [GMail]

Hello I have problem with sending and receiving e-mail.
all is well set, username and password are correct, the server set m.google.com. verification of data is about like stepping into a post and want to check the post office gives me an error message: Can not Get Mail. The connection to the server has failed
I have this problem on my two iPhone

http://www.zdnet.com/google-drops-exchange-activesync-support-for-free-email-acc ounts-7000008836/

I recently upgraded to Firefox 13.0.1 and I'm operating a Mac Powerbook Pro with OS of 10.6.8 (Snow Leopard). Now I'm having intermittent problems with sending

I recently upgraded to Firefox 13.0.1 and I’m operating a Mac Powerbook Pro with OS of 10.6.8 (Snow Leopard).
Now I’m having intermittent problems with sending emails where Firefox freezes up. There is often a yellow warning above suggesting 32-bit mode, sometimes I can click to shift it that way, sometimes not.
Anyone having these problems?
Any suggestions?

I recently upgraded to Firefox 13.0.1 and I’m operating a Mac Powerbook Pro with OS of 10.6.8 (Snow Leopard).
Now I’m having intermittent problems with sending emails where Firefox freezes up. There is often a yellow warning above suggesting 32-bit mode, sometimes I can click to shift it that way, sometimes not.
Anyone having these problems?
Any suggestions?

Mail and iPhoto Problems with sending photos.

Mail and iPhoto Problems with sending photos.
I have this problem that started a while ago and seems to be getting worse.
Here are the different scenarios.
-If I try to share a photo to email within iPhoto, it will insert the image file name in the mail message, but no image icon or opened image. In iPhoto Preferences under General I have chosen to use Email Photos using Mail.
-If I choose to use iPhoto to send the photo, it will compose the message and the photo is viewable. If I send the message i can view the photo within the email I sent to myself. Nothing happens when I double click on the photo in the Mail message. Nothing happens when i control click on the photo in the mail message. Nothing happens when I try to drag the photo to the desktop from the mail message. When I try to save attachments from the email and choose a place to save it, the save button is grayed out and it cannot be saved. When I check the mail message it says there is an attachemnt but there is no file size listed.
-If I use the stationary within Mail app I cannot drag a photo into the placeholder, I get a circle with a line through it symbol when I try. It happens if I try to drag a photo from the desktop or from the media browser within Mail app.
-If I drag the photo to the desktop from iPhoto, I can double click it on the desktop and it will open in Preview.
-If I then control click on the same photo on the desktop and scroll to share/email, the generic photo icon will be inserted in the mail message. If i double click the photo icon in the mail message I get a message it can't be opened because it is empty.
-If I drag that same image to the mail message body the same thing happens.
-If I send that email to someone they cannot open the image file.
What I can do:
- I can drag that same image file on the desktop to my dropbox folder and it will upload. From there I can go on my iPad and download the photo and send it through email just fine.
-I can open the same image file on my desktop in Preview, I can copy and paste it into a mail message and the image will be viewable in the mail message by me and by the recipient.
-I can drag that same image on the desktop to my safari browser window and it will be viewable in the page. i can then copy and paste that image into a mail message and it is viewable in the message. I can then send that email message to myself and i can control click on the image and get all my options. It also shows as an attachment with the size of the image file in the mail message.
I can send that message to someone and they can see the photo and open it fine.
-If I send that same email to me I can see the photo within the mail. If I then drag that photo to the desktop I cannot use it again to put in an email as the same problem happens again.
I have tried all scenarios in my user account, another users account and in a guest account. The same happens in all. I am guessing because of this it is not a corrupt preference file, unless all of the preference files are corrupt. The guest user account I added a new email account so it was brand new and still had the problem.
I am stumped, all and any help is appreciated.

Another problem that may be related….
I have Snapz Pro. I used to be able to save the snaps to my desktop or a folder. Now when I take a screenshot and try to save the file to my desktop or a folder on my desktop I get this message "Files cannot be created in the selected location. You do not have permission to write to the selected location. Please choose a different location." I have found that i can only save the file to the clipboard. I have repaired permissions many times and still I have this problem.

Problem with sending sms - nokia x3

Hello,
I've got a problem with sending sms in my nokia x3 - actually with recently used number. I sent messages, but the list is the same. There is only one number although I used many more. I removed this number from the list, but is still here. I also tried to turn off the phone and pull out the battery, restart factory setting but there's no change.
Could somebody help me, please?
p.s. Sorry, but my english isn't well. I hope the post is understood

Check if there is any relation with the LOG... When you clear the log.. (selecting ALL).. is it removing details from the RECENTLY USED too...
To confirm this select Clear Log.. and check if that one no. you are talking about still remains or not.. If its no more there means you must have cleared the log just before using the last no. that is appearing..
--------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

Problem with Delivery IDOC staus 51

Hi all,
I have problem with Delivery IDOC.
An IDOC is sent from the logistics provider with reference to a manually created delivery, which creates another IDOC & another partial delivery.
The second IDOC created then confirms the partial delivery created by the first IDOC.
When IDOC try to confirm this delivery, it goes to status 51 with error " Delivery does not exist".
In some case IDOC was correctly processed & confirmed the delivery.
In some cases it went wrong.
Any ideas regarding this?

Hi Suneel,
It seems there is timing issue between the first IDoc and second IDoc.
When the first IDoc has not yet commit to DB then the second IDoc tries to process with reference to the first IDoc.
Is there any that can distinguish between 1st and 2nd IDocs?
In other word, can you post the second IDoc within minutes delay?
Just my two cents.
Regards,
Ferry Lianto

Problems with sending via url

Hi there, I've got a problem with sending via an URL. If I send and receive something I use a method called connect. This method works well, I construct a URL, connect and receive an ObjectStream.
But as I only want to set some values in another use case I do not want to receive anything,
But it doesn't work - my servlet does not receive any request.
Could anyone please help me to solve this?
Thank you.
Regards
Tarik
private synchronized static void connectOneWay(String data)
            throws IOException, ClassNotFoundException {
        try {
            URLConnection connection = null;
            URL testServlet = null;
            Class classLock = ServletConnector.class;
            while (locked)
                classLock.wait();
            locked = true;
            testServlet = new URL(servletURL + data);
            if (MMSCMSTree.debug)
                System.out.println("Servlet URL: " + testServlet);
            connection = testServlet.openConnection();
            connection.setDoInput(false);
            connection.connect();
            locked = false;
            classLock.notify();
        } catch (InterruptedException e) {
            e.printStackTrace();
        }

Hi
There was not a problem with this, the problem was on the server side, infinite loop ... :-)
Regards
Tarik

Problems with sending attachements.

Hello I've a problem with sending attachments.
I've got mail Version 5.0 (1244.2/1244.3) and Hosted Exchange (xs4all in the Netherlands). Most of my mail works fine (sending and receive mails).
The most irritating problem is I cannot send messages with a attachement even 1 KB.
Hope anyone can help?
Ohter synchronisation Calender & contacts are even not working fine - but a cable will help. So if anyone can help there to, I will be happy.
Thanks Vanessa

Im having same problem with BTINTERNET account email, tbh ive had issues with this from the start. keeps going on about yahoo *** is that about... could do with someone verifying settings ive done what all the website says but same issue....attachment is only 11.7mb surely thats not an issue.......anybody know whats going on????

Problems with sending/receiving picture messages

Does anyone know how to sort problems with sending/receiving picture messages on the iphone 4S? I've gone through all the re-setting etc at the place I bought it and it still doesn't work!! Spoken to 02 and they said it's an issue with Apple software?? Any help appreciated.

Can you send/receive SMS's? If so, and you can't send/receive MMS's, and MMS is turned on in Settings, 99.9% of the time the problem is on your carrier's end...most likely MMS is not provisioned properly on your account, regardless of what your carrier is telling you. Call back & have them remove MMS from your account & then re-provision your account for MMS.

Problem with send e-mail

Hello,
I have a problem with send e-mail.
When I create a new message, the e-mail is send for customer and me, but the description of message dont send with e-mail.
I have created a Smartform that send this e-mail and your context there is information for send this information.
When I do a modification in this message, when i put a new description, a description preview is send, but a new description dont send.
Can anyboby help me.
Thanks a lot.

Hi,
I already have created a development, but this found the description preview and not actual in run time.
Development:
read table gt_notif_type_text into gs_notif_type_text
with key type_text = gs_notif_text-type_text.
if sy-subrc <> 0.
clear gs_notif_type_text.
endif.
read table gt_notif_type_textt into gs_notif_type_textt
with key type_text = gs_notif_text-type_text.
if sy-subrc <> 0.
clear gs_notif_type_textt.
endif.
In the Smartform on acording abouve:
&gs_notif_type_textt-stxt()& &gs_notif_text-last_usr()& &gv_notif_textdate& &gv_notif_texttime&
Thanks.

Problems with sending IDOC in tRFC.

Similar Messages

Maybe you are looking for