Problems with sending SMS from adress book

Hi all,
I have a new Kotorola MOTOKRZR K1 here.
The Bluetooth connection with iMac is ok. I can send data to phone and I can receive data from phone, but I can't send SMS from adress book v4.0.5 (487) to the phone.
The bluetooth button in adress book is disabled. I can click on this button, but address book open in this case always a dialog: "Pair with bluetooth device".
When I click on the "pair" button, then I can enter my access code vor the phone.
It is the access code from Bluetooth Assistant program for the phone.
my question is, Is here a user, who can send a SMS with MOTOKRZR K1 from adress book?
With my old Siemens S55 is this no problem.
Sorry for my very bad english.
Greetings, Bermd

did this ever get resolved?

Similar Messages

Problem with sending sms - nokia x3

Hello,
I've got a problem with sending sms in my nokia x3 - actually with recently used number. I sent messages, but the list is the same. There is only one number although I used many more. I removed this number from the list, but is still here. I also tried to turn off the phone and pull out the battery, restart factory setting but there's no change.
Could somebody help me, please?
p.s. Sorry, but my english isn't well. I hope the post is understood

Check if there is any relation with the LOG... When you clear the log.. (selecting ALL).. is it removing details from the RECENTLY USED too...
To confirm this select Clear Log.. and check if that one no. you are talking about still remains or not.. If its no more there means you must have cleared the log just before using the last no. that is appearing..
--------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

Problem with sending mail from SAP (ECC6.0)

Hi guys!!
I am facing problem in sending email from SAP to outlook.
I've checked SICF and SCOT configuration and they are same as my other server thorugh which i am able to send the mail.
I use SBWP to send the mail. after i send i do not get any error message, and when i check it in outbox, there is a yellow triangle in the status which means "send process still running" . so the sending mail is taking hours. i've set the frequesncy of my B/G job RSCONN01 to 10 minutes. i checked and this job is running successfully every 10 minutes.
Please suggest what could be the possible reason and what can i do to solve this issue.
Thanks,
Sheetal Sharma

Hi,
First of all ask your IT (Exhchange) guy to check port number 25 is open or not for communincation, if not open ask him to open.
you can check this yourself by doing TELNET
steps to do telnet :
logon to your application server,
go to command prompt
and type TELNET <IP address of email server> 25
If it prompts some message like this
"exhange.domain.com Microsoft ESMTP MAIL Service, Version: 6.0.3790.18 30 ready at Mon, 16 Jun 2008 16:25:41 +0300. "
then it means your port 25 is open for communication.
Regards,
Abuzar.

E71: Sending SMS from Address Book (Mac OS 10.4.11...

Is anyone using an E71 with a Mac?
It is supposedly possible to send an SMS from within Mac's Address Book, but I can't successfully do this despite the two gadgets having been paired and the Bluetooth icon appearing in the Address Book top bar.
Do I need a plug-in or something?
Thanks.
Message Edited by jbalcoreza on 19-Nov-2008 05:40 PM

I don't think it's possible. I have the iSync plugin from Nokia (http://www.nokia.com.au/A4630409) and that's just for syncing your contacts between your E71 and Address Book as well as your calendar events. As for the feature you're looking for regrettably that's not available.
visit my blog at http://wytchecraft-blog.blogspot.com/

Problems with sender RFC from R/3 4.6D

Hi all,
I have configured a sender RFC channel on XI cluster. Immediately after channel activation everything looks fine on backend system (R/3 4.6D):
But after some time (e.g. one hour) the connection somehow stops working.
The u201CTest connectionu201D says u201CProgram ID not registered u2026 u201D and also XI hosts is not listed in u201Clogged on clientsu201D any more.
By restarting the Sender RFC from Communication channel monitor the communication is reestablished. But after an hour it breaks down again.
The strange thing is that this problem occurs only when RFC sender channel is configured on XI cluster with two nodes (our production XI on MSCA). If the same is configured on a stand alone XI (which is our development system) the connection is working fine all the time.
Also the problem happens only when connecting XI cluster with R/3 4.6 D system. When the same connection is established with ERP 5.0 or ECC 6.0 it is working fine.
Setting the property initalRfcClientConnextCheck to false didnu2019t help.
Thanks for helping.
Janos

transaction SMGW(gateway monitor) and choose menu option 'Goto --> Logged on clients'.
make sure that the there is an entry in the program id is same as program id in the RFC sender channel...if not try making a change in the RCF channel and activating again
Edited by: Tarang Shah on Feb 8, 2010 6:48 PM

Problems with sending PDF from iPad to PC?

I am having problems sending a PDF from an iPad. The email is sent and can be read on any Apple device, however it is not viewable on a PC. To complicate things more, the first sending of the email to the PC in not viewable, once it is forwarded to another, the email is viewable just as on an Apple device. I have had this problem with to different apps which led me to belive Mail was suspect. I removed the mailbox and re-installed it with no fix. I think my next move is to reset the iPad. Has anyone had the same problem and come up with a solution?

I've had exactly the same issue
I had (mistakenly) believe the issue had been resolved its new app updates but it hasn't
Today I emailed a signed document using SignNow app. Mindful of previous iPad PDF compatibility issues, I sent myself a copy to my gmail account that I have on my MacBook
Everything appeared to be fine so I then emailed it to the recipient (using a PC) who promptly emailed back to say they hadn't received anything!
This is the second time within two weeks.
Eventually I had to email it to my Mac email account, open in Adobe then 'save as' PDF the. Email it back to my iPad email account so I could then forward onto the recipient.
I had originally believed this to be an app issue but having used SignNow as well as TypeOn now realise it's something peculiar about Mac/PC formatting.
SORT IT OUT APPLE!

S700i and send sms from Address Book.

Hi,
I done a search for an answer but didn't find anything.
Is it possible when in Address Book in osx 10.4.3 to select a mobile phone number and 'send sms'?
This used to work but now doesn't.
Is there anything I can do to fix this?
Thanks.
Lel

It works for me. I have an Nokia 8800 paired via bluetooth.
Right click/control click on the phone number, and the option to send an SMS is there.
It only works with the phone paired though. Make sure the Bluetooth button in Address Book is coloured blue.

Hi, i have problems with audiobooks, chapters from diffrent books stand togheter, the book is mixed with another book, does someone know how to fix this

If i synchronise one book there is no problem,
when I sinchronise more books then chapters from diffrent books stand togheter.
In I-tunes the books are not mixed.
In my ipod classic the books are mixed.
I use the latest version from i-tunes
I work with windows vista pro NL

The easiest thing to do is to make a playlist for each book. I have about ten audiobooks on my iPod and have the same problem with everything being put together in one long list. The iPod does not treat each book as it does an album by grouping each audiobook in one folder, it just lumps them all together in one long list.

Problems with send emails from 2nd account

Hi,
I have problems to sent from a 2nd account. Sending emial via my icloud account works excellent. But if I want to sent emails via my 2nd account I got the message
" Can't sent emails - Adresse [email protected] was declied from server, because forward is not allowed"
I heard that the server has to setup to allow forwrding emails from a 2nd account. Where could I find this?
Thnaks
Michael

I believe CF5 had an issue with 0 byte mails in the spool.
Test your mail to confirm that you do not attempt to send a 0 byte
mail.

Problem with mailing Groups from Address book

I have been using Groups in my address book for a while - adding people to Groups and using the Group name to email them all at once. Recently (since turning on iCloud, though I don't know if that is the cause) I am finding the following problem. I add new people to my address book. I add those new people to a Group. I go to mail and use the Group name... but the new people are not in the email list (when I drill into it). If I go to the address book and use control-click and the drop-down box to select the option to send a mail to the Group, the same thing happens. Any suggestions out there? Thanks.

I am having a similar problem. All the addresses are correct, and I know this because I use them all the time with no errors. BUT when bundled into a group - actually any group I set up I cannot send successfully. I have two groups in my mail program and neither will work.

Problem with sending email from 4.6C to MS-outlook / Exchange

Hello,
I'm trying to send an email with a pdf-attachment from my 46C system. In trans SOST everything looks fine. There is a document with an attachment. When I send it to my email-client there's no attachment. And the following message is given in my email:
This message is in MIME format. Your mail reader does not support MIME. Please read the first section, which is plain text, and ignore the rest. Better yet, get a MIME-capable mail reader.
Does anybody recognise this message ???
Regards,
GJ van Holland

Hai G.J.Van
Check the following Code
DATA: OBJPACK   LIKE SOPCKLSTI1 OCCURS 2 WITH HEADER LINE.
DATA: OBJHEAD   LIKE SOLISTI1 OCCURS 1 WITH HEADER LINE.
DATA: OBJBIN    LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
DATA: OBJTXT    LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
DATA: RECLIST   LIKE SOMLRECI1 OCCURS 5 WITH HEADER LINE.
DATA: DOC_CHNG LIKE SODOCCHGI1.
DATA: TAB_LINES LIKE SY-TABIX.
DATA L_NUM(3).
Creation of the document to be sent
File Name
DOC_CHNG-OBJ_NAME = 'SENDFILE'.
Mail Subject
DOC_CHNG-OBJ_DESCR = 'Delivered Mail'.
Mail Contents
OBJTXT = 'Object text'.
APPEND OBJTXT.
DESCRIBE TABLE OBJTXT LINES TAB_LINES.
READ TABLE OBJTXT INDEX TAB_LINES.
DOC_CHNG-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJTXT ).
Creation of the entry for the compressed document
CLEAR OBJPACK-TRANSF_BIN.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = 'RAW'.
APPEND OBJPACK.
Creation of the document attachment
LOOP AT ITAB_DATA.
    CONCATENATE ITAB_DATA-PRODUCTOR
                ITAB_DATA-VBELN
                ITAB_DATA-POSNR
                ITAB_DATA-MATNR INTO OBJBIN.
    APPEND OBJBIN.
ENDLOOP.
DESCRIBE TABLE OBJBIN LINES TAB_LINES.
OBJHEAD = 'ORDERS'.
APPEND OBJHEAD.
Creation of the entry for the compressed attachment
OBJPACK-TRANSF_BIN = 'X'.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM   = 1.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM   = TAB_LINES.
OBJPACK-DOC_TYPE   = 'TXT'.
OBJPACK-OBJ_NAME   = 'WEBSITE'.
OBJPACK-OBJ_DESCR = 'ORDERS.TXT'.
OBJPACK-DOC_SIZE   = TAB_LINES * 255.
APPEND OBJPACK.
Completing the recipient list
target recipent
clear RECLIST.
RECLIST-RECEIVER = '[email protected]'.
RECLIST-EXPRESS = 'X'.
RECLIST-REC_TYPE = 'U'.
APPEND RECLIST.
copy recipents
clear RECLIST.
RECLIST-RECEIVER = '[email protected]'.
RECLIST-EXPRESS = 'X'.
RECLIST-REC_TYPE = 'U'.
RECLIST-COPY     = 'X'.
APPEND RECLIST.
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
       EXPORTING
            DOCUMENT_DATA              = DOC_CHNG
       TABLES
            PACKING_LIST               = OBJPACK
            OBJECT_HEADER              = OBJHEAD
            CONTENTS_BIN               = OBJBIN
            CONTENTS_TXT               = OBJTXT
            RECEIVERS                  = RECLIST
       EXCEPTIONS
            TOO_MANY_RECEIVERS         = 1
            DOCUMENT_NOT_SENT          = 2
            OPERATION_NO_AUTHORIZATION = 4
            OTHERS                     = 99.
Thanks & regards
Sreenivasulu P

Problem with sending sms with FM SO_NEW_DOCUMENT_SEND_API1

Hi All ,
I'm facing a peculiar issue where the SMS is being sent to one document type but not for second document type.
When the code is executed at this FM SO_NEW_DOCUMENT_SEND_API1 in the working scenario I see that table SOSC is updated with transmission method as 'PAG' (pager)and can see the entry in transaction SOST.
For the scenario not working this table is not being updated. When we checked the configuration it is same.
I've checked some threads where in commit work was placed after this FM. I tried this option but I see that this table is not getting updated with the transmission record entry.
It will be great if anyone has faced this issue and let us know what we are missing.
Any OSS note or hint in resolving this issue is appreciated
Thanks for your time.
Br,
Vijay

Solved the problem myself.
After this FM call the report with below code
SUBMIT rsconn01
    WITH mode   = 'INT'
    WITH output = ' '
    AND RETURN.
This ensures sosc entry in the table for the request triggered.So the message SO 672 is ruled out.
Br,
VJ

TS3899 Problem with sending mail from iPhone

I have three mail accounts (Exchange, POP, IMAP) on my iPhone 4 with iOS 7.0.4. All works fine for receiving mails, but sending does not work from any of them. I write mail, tap send and it seems to go (with the sound) but never reach the reciever.
I have the exact same account setup on the family iPad and there sending mails works fine.
Any suggestions /solutions ?

Sorry to intrude, but figured I'd ask. I'm having the same issue (emails I reply to and send via my phone disappear entirely -- no evidence on my comp either -- and I'm never sure if the intended recipient ever received them), but in trying to fix this issue, I discovered I'm actually missing the "Sent Mailbox" option entirely. It's not under Settings > Mail, Contacts, Calendars > Gmail > Account > Advanced > Mailbox Behaviors" -- only Drafts, Deleted and Archive are. Any idea where it is? How to get it back (assumign it was ever there to begin with)?
I have an iPhone 4S w/ iOS 7.

Hi...Problem with sending mail from SAP

Hi all,
My problem is:
I have created a distribution list which contains Internet userids & SAP Userids.
In the code I have written the follwing code for receiver list
          reclist-receiver = zwfi_yefap_paypr-list1."it contains distribution list name
          reclist-rec_type = 'C'.
          reclist-express = 'X'.
          APPEND reclist.
I have passed this to function module SO_NEW_DOCUMENT_ATT_SEND_API1 receiver parameter.
when I run the program SAP user id's are getting mails but not internet userrids.
What couldbe the issue .
Please let me know what could be the reason.
Thanks in Advance.
Raja

Hello,
U need to submit the report
Start the send process
SUBMIT rsconn01
WITH mode = 'INT'
WITH output = ' '
AND RETURN.
If useful reward.
Vasanth

Problem with sending clips from after effects to premiere. Color looks different. Any advice? Can't link. 4k raw in premiere and 40 layers per clip in ae. Can't handle it.

There's a definite color difference from Premiere to ae. I'm using cineform files as alphas from ae to put back over the clips in Premiere as a layer. The problem is the color doesn't match like it did in ae and the mask and all that seem funky. Anyone experience this or have ideas?

There's a definite color difference from Premiere to ae. I'm using cineform files as alphas from ae to put back over the clips in Premiere as a layer. The problem is the color doesn't match like it did in ae and the mask and all that seem funky. Anyone experience this or have ideas?

Problems with sending SMS from adress book

Similar Messages

Maybe you are looking for