Problems with set up of iPhone 6 plus.

Have followed prompts on new phone from 'Hello' screen, chosen restore from back up (from previous iPhone 3S) on iTunes, it all the stuff, syncing etc. then the phone restarts back at the beginning with 'Hello" screen, so I am stuck in a perpetual loop.
PC computer running Windows 7 professional N.
iTunes v. 12.0.1.26

Thanks. Similar suggestion to Mabaeyens. I think this is what I will try. Will let you know. I am taking a break from it now as totally frustrated.
Thanks again
Tim

Similar Messages

  • Problem with setting up new iphone

    Hi,
    I recently upgraded my iphone form a 3 to 4S. I backed up my old phone before connecting one. I followed all the steps I should have but it has not worked. The back up has worked for my calender and notes and contacts but mu music and aps have not trasnferred across. I have tried to complete a normal sync after this but cannot navigate to the sync options. It just keeps asked me to chose my new phone back up options all over again.
    Any ideas???
    Any help would be gratefully received.
    Vicky

    It says on the iCloud support website that, if some of the files in your backup was from another apple ID (example: your cousin sent you music attached to her account), you are required to provide the password to that account. A potential fix is to contact the person who has that account and ask them for their password (which will only work if you know that person).
    I am running into the problem that I can no longer contact the person whose account password I need, and thus the popup to sign them in keeps appearing every time I open up the phone.
    I am going to the apple store to try to figure out my problem, and will post an update in a few days with their solution.

  • HT3529 i have a problem with mms in my iPhone 5s when m trying to send MMS

    i have a problem with mms in my iPhone 5s when m trying to send MMS then a message appears on the screen 'cannot send messageMMS Messaging needs to be enabled to send this message' but in settings there is no setting available to inable MMS in message settings

    Had the same problem. Have you checked your Cellular Data Network MMS fields? You should write there your MMS settings (APN, username, password, mmsc, mms proxy and mms max message size). You can get the data from your carrier. After that you could need to restart iPhone.  Worked for me.

  • Hi guys, I have a problem with imessage. My iphone 4S is factory unlocked and i have been using t-mobile carrier. i tried settings - messages - imessage on but there is this 'waiting for activation' thing. Does anyone know how to solve this? Thanks!

    Hi guys, I have a problem with imessage. My iphone 4S is factory unlocked and i have been using t-mobile carrier. i tried settings - messages - imessage on but there is this 'waiting for activation' thing. Does anyone know how to solve this?
    Thanks!

    If you are in the UK:
    Please upgrade your plan to Web n Walk plus. One of our users on T-Mobile UK had this to report back to us:
    T-Mobile UK are in fact port blocking to ensure fair usage on their base Web and Walk Plan. I have upgraded to Web and Walk Plus and as a result the port blocks are lifted and I get a higher data allowance!
    We were also recently contacted by T-Mobile UK, who stated the following:
    Any smart phone (iphone, android etc) that is bought directly from T-Mobile should be automatically provisioned with Web n Walk plus, if customers have bought a handset sim free then they will need to call customer services and get this added. It is free of charge for most price plans (including new plans) but some older plans will generate a charge of £5pm for this.

  • HT1933 I am facing problems with mails after update iPhone 4S/io7. I have configured yahoo mail in iPhone 4S. When I click on refresh, it shows new mail downloaded but when I go inside inbox the new mail don't show up. Can anyone help me with this iOS 7 i

    I am facing problems with mails after update iPhone 4S/io7. I have configured yahoo mail in iPhone 4S. When I click on refresh, it shows new mail downloaded but when I go inside inbox the new mail don't show up. Can anyone help me with this iOS 7 issue ?

    Hi were you able to resolve yours?
    I was very worried losing all my medical stuff on my iPad Air 2, plus i have nothing to use for the next day! So i have to try all the possible things i read on the internet!! And this worked on my part (Thank God, and thank you Google)
    Perform a hard reboot
    Hold down the Home button and Power button on your iPhone or iPad and keep holding them until you see the Apple logo. Once you do, you can let go. When your device boots back up, go ahead and check to see if the apps have started re-downloading. If they still appear to be stuck, continue on.

  • I have a problem with wifi in my iphone 4s, i already try everything and download latest version 7.1(11D167) but wifi switch is not working, its my humble request to Apple support team that pls resolve this problem as soon as possible because

    I have a problem with wifi in my iphone 4s, i already try everything and download latest version 7.1(11D167) but wifi switch is not working, its my humble request to Apple support team that pls resolve this problem as soon as possible because its a prestiage of Apple Company.
    Pls inform me how can i resolve the problem of wifi.

    You have to go to autherized iPhone agent.

  • Problems with home button on iPhone 4

    problems with home button on iphone 4

    If its due to sensitivity issues, these self help guides might help.
    http://www.youtube.com/watch?v=zNwr_mxgs9Q
    http://www.youtube.com/watch?v=lSqPC1V0PPg&feature=related
    By the way, alcohol based hand sanitisers work too.
    Don't overapply it in one go though. You'll have to allow the alcohol to evaporate.
    One final tip, after its dried, I'd recommend you to leave your iPhone's home button facing a laptop's vent just to bake it a little drier.

  • HI I HAVE PROBLEM WITH APPSTORE ON MY IPHONE,,,i CANT DOWNLOAD ANYTHINK,,,,BECAUSE MY SESSION HAS TIMED OUT...WHAT I HAVE TO DO NOW?

    HI I HAVE PROBLEM WITH APPSTORE ON MY IPHONE,,,i CANT DOWNLOAD ANYTHINK,,,,BECAUSE MY SESSION HAS TIMED OUT...WHAT I HAVE TO DO NOW?

    Hello dear sir alex_h1 i'm still have the same problem my problem is not with imessage or facetime i'm using ipad2 so still cant activate my ipad i hope you help me soon thank you .

  • Problem with Set/Get volume of input device with single channel

    from Symadept <[email protected]>
    to Cocoa Developers <[email protected]>,
    coreaudio-api <[email protected]>
    date Thu, Dec 10, 2009 at 2:45 PM
    subject Problem with Set/Get volume of input device with single channel
    mailed-by gmail.com
    hide details 2:45 PM (2 hours ago)
    Hi,
    I am trying to Set/Get Volume level of Input device which has only single channel but no master channel, then it fails to retrieve the kAudioDevicePropertyPreferredChannelsForStereo and intermittently kAudioDevicePropertyVolumeScalar for each channel. But this works well for Output device.
    So is there any difference in setting/getting the volume of input channels?
    I am pasting the downloadable link to sample.
    http://www.4shared.com/file/169494513/f53ed27/VolumeManagerTest.html
    Thanks in advance.
    Regards
    Mustafa
    Tags: MacOSX, CoreAudio, Objective C.

    That works but the the game will not be in full screen, it will have an empty strip at the bottom.
    I actually found out what's the problem. I traced the stageWidth and stageHeight during resizing event. I found out that when it first resized, the stage width and height were the size with the notification bar. So when I pass the stage into startling, myStarling = new Starling(Game,stage), the stage is in the wrong size. For some reason, I can only get the correct stage width and height after the third resizing event.
    So now I need to restart Starling everytime a resizing event happened. It gives me the right result but I am not sure it is a good idea to do that.
    And thanks a lot for your time kglad~I really appriciate your help.

  • Problem with SET GET parameters

    Hi all,
    I am facing a problem using SET and GET parameters.
    There is a Z transaction(Dialog program) where some fields of screen are having parameter ID's. That transaction is designed to diaplay/change status of only one inspection lot at a time.
    Now I need to call that transaction in a loop using BDC. I mean i need to update the status of multiple inspection lots(one after the other). Before calling the transaction I am using
    SET PARAMETER ID 'QLS' FIELD lv_prueflos.
    Unfortunately the transaction is only changing the first inspection lot. When I debugged I found that the screen field is changing in PAI. Even though in PBO it shows the next value, when it goes to PAI it is automatically changing to the first value(inspection lot).
    Example: Inspection Lots : 4100000234
                                               4100000235
                                              4100000236
    Now first time when the call transaction is being made the status of insp lot 4100000234 is changed. For the second time when insp lot 4100000235 is being passed in PBO ican see this. But the moment it enters PAI the screen field changes to 4100000234.
    Could you pls help me in solving this issue.
    Thanks,
    Aravind

    Hi,
    Problem with SET GET parameters
    Regarding on your query. Follow this below link.
    It will help you.
    Re: Problem with Set parameter ID
    Re: Problem in Set parameter ID
    I Hope it will helps to you.
    Regards,
    Sekhar

  • I have problem with storage on my iphone.

    I have problem with storage on my iphone 6. Before i uppgrade to the newest ios. I had 100 Gb free. Now i have nothing free. and iphone keeps saying that my storage is full. And does not work propperly
    Need help fast thanx

    Purchasing more Storage on iCloud will not increase the Storage Capacity of your iDevice.
    You need to Delete Content from your iDevice...
    Goto... Settings > General > Usage > Storage = Then Delete Content...
    See Here  >   http://osxdaily.com/2013/07/24/remove-data-storage-iphone-ipad/

  • I am experiencing two problems with iTunes on my iPhone 5s.

    I am experiencing two problems with iTunes on my iPhone 5s.
    Issue 1: iTunes Match
    Some song playback is merging songs. I select “Song A” to be played and midway through the song it begins playing “Song B” however when I look at my phone it indicates that “Song A” is still playing even though the actual music is not “Song A”. I searched the Apple Support Community as well as the internet and this seems to be an ongoing issue back to 2012 that has not been resolved. All of the “fixes” that are provided do not work. For example, update/sync iTunes Match, delete the song from your iPhone and re-download from the cloud or delete the song from your iTunes including the iCloud and re-download. None of which worked. I even tried to complete erase the song from my computer hard drive and restarted my computer and then re-downloaded the song and it was still not working.
    Issue 2: iTunes Preview Track
    I am unable to preview any music on iTunes through the iTunes app on my phone. I have signed out of my user ID and restarted my phone and then logged back in and it did not fix the problem. My iTunes Match and iTunes radio are allowing me to play music. My software is up-to-date.

    Same problem here, Im running the latest version of iOS 7 on my iphone 5S (ipod 5S) bricked lol. It was working fine and then a mates baby grabbed my phone and dropped it (not very high) then it went off so i turned it on and BAM i got the grey backround with the apple logo on it so, I waited, Then it went to BSOD and got stuck in that loop, I then done a manual reset I was able to turn it off thats all. I tried restore in recovery mode with the latest itunes it come up with Unknown Error, error code (14) (something to do with unreconizable USB) tried many diffrent USB ports but sadly nothing, I then tried DFU mode with itunes still not working. Im really stuck on this one I need some assitance PLEASE! HELP!
    No aftermarket apps on iphone 5s
    Latest iOS 7 on iphone 5s
    Latest itunes 11.1.5.5
    Running Windows 7 (good comp)

  • Button in Bex Analyser 7.0 - problem with setting up Static Parameters

    Hello,
    I know a similar problem has been discussed here already, but I am still having problems with setting up Static Parameters of my Button in BEx Analyser 7.0, so that I can pass Variable values from that button to my query.
    This is what I do - in Static Parameters of my Button I set the following values:
    Name                          Index          Value
    DATA_PROVIDER        0               DP_1
    CMD                             0               PROCESS_VARIABLES
    SUBCMD                      0               VAR_SUBMIT
    VAR_NAME                 0               0RMA_FIP
    VAR_VALUE               0               004/2010
    As a result, I would like the value 004/2010 to be passed to variable 0RMA_FIP (which is mandatory) and the query to be executed with that value. For some reason, however, the value is not passed correctly, and instead the variable is filled with a blank or not filled at all, and I am getting a message "Specifiy value for variable Fiscal year/period". What do I do wrong?
    Just to give you a broader picture - I would like to later use this logic to pass more than one variables into a query, including a hierarchy node, and read the values from an Excel worksheet - however, after many attempts to do so, I started playing with just one variable to figure out what the problem was.
    I have already seen the following two threads and SAP notes on passing variable values from the button:
    Re: Button in BEx Analyzer 7.0
    Re: How to set variables values via VBA.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0881371-78a1-2910-f0b8-af3e184929be?quicklink=index&overridelayout=true
    Can anyone please advise?
    Cheers,
    AL

    I managed to figure it out myself!
    Instead of VAR_VALUE I need to enter VAR_VALUE_EXT, and it works fine.
    I will mark this thread as "answered".

  • Problem with setting Source Level in Sun Studio 2

    I've got problem with setting Source Level to 1.5 in Sun Studio 2. When I try to set it to 1.5 in Project properties and click Ok everything seem to go well, but when I open Project Properties again Source Level is set to 1.4. I need this to work cause I started to lear Java recently and I want to use foreach loop.
    Please help

    I'm just citing an example using Date().
    In fact, whether I use DateFormat or Calendar, it shows the same result.
    When I set the date to 1 Jan 1950 0 hours 0 minutes 0 seconds,
    jdk1.4.2 will always return me 1 Jan 1950 0 hours 10 minutes 0 seconds.
    It works correctly under jdk1.3.1

  • Problems with setting up my ISP's mail server in Windows Live Mail and Thunderbird

    The laptop is a G60-535DX with Windows 7  64 bit. I've managed to setup my gmail account fine in Live Mail, but when setting  up my ISP' mail server, it doesn't work. I get the message that the information was entered correctly, and I see the 'connecting' at the bottom of the page, and then 'error', and clicking on it shows a socket error #10061. In Thunderbird, I get a timeout error message. I've entered all the incoming and outgoing server information correctly, (I've done this over 8-9 times now), the ports are the defaults(110,25), no SSL, no authentication. I've talked with my ISP several times. Just a couple of hours ago was the last time. Their only other possibilities were that Live Mail had problems with setting up more than one account, that Live Mail needed updating, that Windows 7 was a new operating system and there were 'kinks'. I removed the gmail account, set up the ISP's mail by itself; didn't help. I checked for Live Mail updates, but found out that they all come from Windows updates(which are current).  The folks on PCQ&A inform me that they have 3 or 4 accounts with Live Mail. I can get my mail, by logging onto my ISP's website, but that' kind of a nuisance. I posted this in Seven Forums and they didn't have any ideas. As I said, I also can't get my mail server to work in Thunderbird, either.  I don't know what else to try. (short of activating the recovery partition and starting from scratch). Any ideas would be more that welcome.
    Thanks,
    Steve

    Stevehiker wrote:
    Nevermind, it's fixed. One of the guys on PCQ&A suggested going to my ISP's website to see if they had a support page. They did and it stated that under certain circumstances that for the login ID the whole email address should be entered. For XP and Outlook Express one only uses the first part of the email address (your name); so just for grins I entered the whole address, name and all and everyting worked. Called my ISP and was told that that wasn't the way it's supposed to work. Well----
    Thanks anyway,
    Steve
    Mine works the same way_must enter full email address as login. AT&T?
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

Maybe you are looking for