Problems with setting up Exchange account in Outlook

Hi,
I have a problem with trying to connect my Exchange account on Outlook for mac, a message keeps popping up every time I try to add my exchange account. It says "outlook was redirected to the server auto discover-s.outlook.com to get new settings for your account". Even if I choose to allow the server to configure my settings nothing ever happens and I cant receive or send any mail. I tried to give the server name in the advanced settings bot that did not help either. Could someone please help me out?

Similar Messages

How can set up exchange account in outlook 2011 manually?

I can't set up exchange account in outlook 2011 automatically. who can help me out?
and how can know whether the account has been added successfully?

If you can't add it automatically, you probably need some help from your company's helpdesk. It would be best to contact them because they may have some settings that are specific to their environment.

HT1414 Since updating to iso6.0 I have had problems with my email exchange account syncing correctly - I keeps loosing connection with the server.

Since updating to iso6.0 I have had problems with my email exchange account syncing correctly - I keeps loosing connection with the server.

Are you losing the connection to iTunes on the iPad or the computer? You are saying that iTunes is updated. Of course iTunes is updated when you update the iOS software. That's a no brainer.
If you mean that iTunes is updated on the computer, that has absolutely nothing whatsoever to do with downloading and updating apps on the iPad itself so changing the date on the iPad, signing in and out of the stores on the iPad .... Doing any of that on the iPad would have nothing to do with iTunes on your computer.
If .... you have not been able to connect to the iTunes or app stores at all on the iPad - try this ...
Settings>Privacy>Location Services>System Services (swipe to the bottom of the page to find this)>Location Based iAds>Off.
If the downloads are stalled or "waiting" - try these suggestions.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If you can't connect at all - you can also try rebooting your router. Unplug it from power for about 30 seconds and then plug it in again.

I have a problem with setting up email account, I can receive emails but can't send

How do you set up youe email account on iPad?
I followed instructions and I can receive emails but not send

Hi,
As far as the outgoing of mail is concern, just verify the below points.
Outgoing mail server.
SSL option
Port no : if its other then the default once.
Outgoing Authentication Method.
Regrads,
Ashwin Bhadra.
http://www.mapledti.com

Unable to configure multiple Exchange accounts in Outlook 2013

This is a complicated issue so I will try to describe it the best I can.
I have a client with two SBS servers for two different organizations in two different locations. Each server handles completely different domains. Let's call them A and B.
The issue is this...using Outlook 2010 or 2013 on clients at location B, I can configure Outlook for the users mailbox on server B just fine. Some of the users at location B also have mailboxes on server A. When I add a 2nd Exchange account for
the users mailbox on server A, things get weird.
Sometimes, when I start Outlook after adding the 2nd Exchange account, Outlook will show only one mailbox, but it is incorrect. The top level will show it is a mailbox on server B, but it contains email from server A. When this happens, email
actually transfers from one mailbox to the other. I have to close Outlook quickly before things get out of hand. About a year ago, I determined that if the user has the same username and password for their mailbox on server A and server B, this would
cause the problem. So I changed the users' username on server B and it seemed to work with Outlook 2010.
Now, a year later, we have a new user with Outlook 2013 with a mailbox on server A and server B, who works in location B. I setup Outlook 2013 with mailbox B and it's fine. I add a 2nd Exchange account for mailbox A to their Outlook Profile,
and when I launch Outlook, it shows both. BUT, the mailbox A has nothing in it, and the status shows "This folder has not yet updated. CONNECTED". Mailbox B shows "All folders up to date. Connected to Microsoft Exchange".
Also, existing email from mailbox A starts showing up in mailbox B. If I go into mail account settings, I get the "Outlook is using temporary mailbox" dialog, meaning something has moved. If I look at the two accounts, both look
to be using the same OST file, even though under data files, there are two OST files, one for each mailbox account. If I delete the 2nd Exchange account (A), Outlook works again for the single mailbox on server B.
I've tried configuring the accounts without cached mode, but that doesn't work either. Mailbox B had a delegate account (Full access permissions) to another account on server B, but I have tried removing that also, but no change.
I cannot figure out why I cannot have two Exchange accounts, one from each server (A and B) in Outlook 2013/2010 at the same time.
HELP!
Thank for any ideas. I hope I haven't made this too confusing. One last thing...when I add the 2nd Exchange mailbox, I authenticate with the username on server A with domain\username and their password. The authentication seems to be accepted
fine and without error. I have also tried configuring the 2nd account using "automatic" instead of configuring manually. Same problem.

OK, I have done some more testing as you suggested. I created yet another new profile with just mailbox A. When I start Outlook, I see the users mailbox, plus a mailbox that the user has been given Full Permissions to (a delegate?). There
is one more mailbox that this user has full permissions to, but it did not auto-add itself, so I added the mailbox through the account properties. Now, all three mailboxes at location A are in Outlook (users mailbox and 2 delegate mailboxes). In
Outlook, on the left, has at the top the users main mailbox, and then below it are two other "branches" for the delegate mailboxes. I did NOT use cached exchange mode, btw.
I quit Outlook and edited the profile, adding another exchange account for the users mailbox at location B. I did a "check-name" and authenticated OK.
I launched Outlook, and the same (wrong) thing happens. On the left pane of Outlook, at the top, it shows it is the users mailbox at location B (the main branch says Mailbox name -- location B), but all the folders and content are from mailbox at location
A. Outlook has mixed it up, and it is at this point that email starts moving between mailboxes, so I quit Outlook quickly. It did show the two delegate mailboxes from location A, but there were just three "branches", and nowhere is there
the real mailbox B.
Can it have anything to do with the fact that these accounts have delegates (or are given full manage permissions to other mailboxes on the server)??
UPDATE: I just determined something. When looking at the Outlook email accounts dialog, for each account it shows the default delivery location. For the first account (location A), it shows:
"Selected account delivers new messages to the following location: usersemail@locationA\Inbox".
When I add the users mailbox for location B, it shows:
"Selected account delivers new messages to the following location: usersemail@locationB\Inbox".
However, when I start Outlook, and see that things are wrong and quit, I go back into the accounts dialog, and BOTH accounts are set to deliver to the SAME location:
"Selected account delivers new messages to the following location: usersemail@locationA\Inbox".
So now, the 2nd exchange account has changed it's location to deliver to mailbox A instead of B.
Crazy stuff.

Problems with setting up my ISP's mail server in Windows Live Mail and Thunderbird

The laptop is a G60-535DX with Windows 7 64 bit. I've managed to setup my gmail account fine in Live Mail, but when setting up my ISP' mail server, it doesn't work. I get the message that the information was entered correctly, and I see the 'connecting' at the bottom of the page, and then 'error', and clicking on it shows a socket error #10061. In Thunderbird, I get a timeout error message. I've entered all the incoming and outgoing server information correctly, (I've done this over 8-9 times now), the ports are the defaults(110,25), no SSL, no authentication. I've talked with my ISP several times. Just a couple of hours ago was the last time. Their only other possibilities were that Live Mail had problems with setting up more than one account, that Live Mail needed updating, that Windows 7 was a new operating system and there were 'kinks'. I removed the gmail account, set up the ISP's mail by itself; didn't help. I checked for Live Mail updates, but found out that they all come from Windows updates(which are current). The folks on PCQ&A inform me that they have 3 or 4 accounts with Live Mail. I can get my mail, by logging onto my ISP's website, but that' kind of a nuisance. I posted this in Seven Forums and they didn't have any ideas. As I said, I also can't get my mail server to work in Thunderbird, either. I don't know what else to try. (short of activating the recovery partition and starting from scratch). Any ideas would be more that welcome.
Thanks,
Steve

Stevehiker wrote:
Nevermind, it's fixed. One of the guys on PCQ&A suggested going to my ISP's website to see if they had a support page. They did and it stated that under certain circumstances that for the login ID the whole email address should be entered. For XP and Outlook Express one only uses the first part of the email address (your name); so just for grins I entered the whole address, name and all and everyting worked. Called my ISP and was told that that wasn't the way it's supposed to work. Well----
Thanks anyway,
Steve
Mine works the same way_must enter full email address as login. AT&T?
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Is something wrong with the new software update. My battery dies within 4 hours. There are also problems with my e-mail accounts. Can someone help me?

Is something wrong with the new software update. My battery dies within 4 hours. There are also problems with my e-mail accounts. Can someone help me?

Have you attempted an iTunes restore and setting up as a new device? Sometimes battery life issues can be caused by corrupted iOS software.
- Greg

Can' add Exchange account to Outlook 2013

Hi,
We have an Exchange 2013 server which as far as I know is fully working - Outlook clients on the domain connect fine, OWA works fine and mobile devices work fine.
However I have a problem when trying to add an Exchange account to Outlook 2013 when this computer is on another domain (separate network, separate domain, separate company).
I assume Outlook is searching for an Exchange server which isn't there but how can I get around this?
Thanks

Hi,
Please try to alter the authentication method on the relevant CAS servers to Basic and test the issue. For details:
http://technet.microsoft.com/en-us/library/bb124503%28v=exchg.141%29.aspx
Thanks,
Rebecca Tu
TechNet Community Support

Problem with Set/Get volume of input device with single channel

from Symadept <[email protected]>
to Cocoa Developers <[email protected]>,
coreaudio-api <[email protected]>
date Thu, Dec 10, 2009 at 2:45 PM
subject Problem with Set/Get volume of input device with single channel
mailed-by gmail.com
hide details 2:45 PM (2 hours ago)
Hi,
I am trying to Set/Get Volume level of Input device which has only single channel but no master channel, then it fails to retrieve the kAudioDevicePropertyPreferredChannelsForStereo and intermittently kAudioDevicePropertyVolumeScalar for each channel. But this works well for Output device.
So is there any difference in setting/getting the volume of input channels?
I am pasting the downloadable link to sample.
http://www.4shared.com/file/169494513/f53ed27/VolumeManagerTest.html
Thanks in advance.
Regards
Mustafa
Tags: MacOSX, CoreAudio, Objective C.

That works but the the game will not be in full screen, it will have an empty strip at the bottom.
I actually found out what's the problem. I traced the stageWidth and stageHeight during resizing event. I found out that when it first resized, the stage width and height were the size with the notification bar. So when I pass the stage into startling, myStarling = new Starling(Game,stage), the stage is in the wrong size. For some reason, I can only get the correct stage width and height after the third resizing event.
So now I need to restart Starling everytime a resizing event happened. It gives me the right result but I am not sure it is a good idea to do that.
And thanks a lot for your time kglad~I really appriciate your help.

Problem with SET GET parameters

Hi all,
I am facing a problem using SET and GET parameters.
There is a Z transaction(Dialog program) where some fields of screen are having parameter ID's. That transaction is designed to diaplay/change status of only one inspection lot at a time.
Now I need to call that transaction in a loop using BDC. I mean i need to update the status of multiple inspection lots(one after the other). Before calling the transaction I am using
SET PARAMETER ID 'QLS' FIELD lv_prueflos.
Unfortunately the transaction is only changing the first inspection lot. When I debugged I found that the screen field is changing in PAI. Even though in PBO it shows the next value, when it goes to PAI it is automatically changing to the first value(inspection lot).
Example: Inspection Lots : 4100000234
4100000235
4100000236
Now first time when the call transaction is being made the status of insp lot 4100000234 is changed. For the second time when insp lot 4100000235 is being passed in PBO ican see this. But the moment it enters PAI the screen field changes to 4100000234.
Could you pls help me in solving this issue.
Thanks,
Aravind

Hi,
Problem with SET GET parameters
Regarding on your query. Follow this below link.
It will help you.
Re: Problem with Set parameter ID
Re: Problem in Set parameter ID
I Hope it will helps to you.
Regards,
Sekhar

Problem with mail for exchange after update on E72...

Hi everyone,
I updated Nokia E-mail to ver 3.9 on E72. Now I am facing a problem with mail for exchange. I have configured gmail on mail for exchange. I recieve a warning that "unable to sync contact administrator if problem persist". It started to pop up just after the update was over and is very frustrating. Even previously i used to recieve mails instantly but now it generally takes half an hour for me to recieve them. I deleted and created mail for exchange several times but to no avail.
Also i am not able to automatically recieve mails other emails which i have configured. every time I have to manually download them everytime.
Can anybody suggest a way out.
Thanks
Anil

It could be a problem if you're using your network's connections...
I was on a Pay & Go tariff with o2 some time ago, and needed secure connections for various things, o2 told me they didn't provide secure connections on Pay & Go tariffs...
Could be worth checking with them to make sure it's supported.
Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

Cannot connect to an Exchange account in Outlook 2013 using "Microsoft Exchange Server or Compatible Service"

Dear All,
I cannot connect to my Exchange account in Outlook 2013 using "Microsoft Exchange Server or Compatible Service".
First I would like to present my network environment, I have 4 physical servers;
The first one is holding the Domain Controller 1, IP@: 192.168.1.10
The second server is holding the additional Domain Controller which it is DC2, IP@: 192.168.1.11
The third server is holding the Exchange 2013 Mailbox, IP@: 192.168.1.15
And the last server is holding the Exchange 2013 CAS-HT, IP@: 192.168.1.16
I am doing the steps below:
1-Creating a new profile in outlook and start configuring the exchange account by entering the IP address of the Exchange-CAS Server, 192.168.1.16
2-entering the account name: [email protected]
3-Go to "More Settings" > "Connection" > "Connect to Microsoft Exchange using HTTP" > and entering the "Exchange Proxy Settings"
4-type the exchange CAS Server URL, https://192.168.1.16
5-Check the "Connect using SSL Only"
6-Authentication Settings: "NTLM Authentication", and pressing Apply
7-When I press the "Check Name" button, a message occurred> "The action cannot be completed. The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action".
8-I go back to the "Exchange Proxy Settings" and I Uncheck the "Connect using SSL Only" and pressing Apply
9-i press the "Check Name" Button, a small window occurred to enter a Username and Password, so I enter the Administrator username and the administrator password and pressing "OK", but nothing is changed, I tried to enter my
username and password in the small window and I still got the same result.
I cannot verify the account name and I cannot complete the process.
I appreciate you kind assistance.

Hi,
To narrow down the cause, I’d like to recommend the following troubleshooting:
1. Try to login the test account through OWA.
2. Check the Autodiscover settings: get-clientaccessserver |fl autodiscoverserviceinternaluri
3. Check the result of directly accessing the following URL:
https://autodiscover.domain.com/autodiscover/autodiscover.xml
Thanks,
Angela
Angela Shi
TechNet Community Support

Button in Bex Analyser 7.0 - problem with setting up Static Parameters

Hello,
I know a similar problem has been discussed here already, but I am still having problems with setting up Static Parameters of my Button in BEx Analyser 7.0, so that I can pass Variable values from that button to my query.
This is what I do - in Static Parameters of my Button I set the following values:
Name                          Index          Value
DATA_PROVIDER        0               DP_1
CMD                             0               PROCESS_VARIABLES
SUBCMD                      0               VAR_SUBMIT
VAR_NAME                 0               0RMA_FIP
VAR_VALUE               0               004/2010
As a result, I would like the value 004/2010 to be passed to variable 0RMA_FIP (which is mandatory) and the query to be executed with that value. For some reason, however, the value is not passed correctly, and instead the variable is filled with a blank or not filled at all, and I am getting a message "Specifiy value for variable Fiscal year/period". What do I do wrong?
Just to give you a broader picture - I would like to later use this logic to pass more than one variables into a query, including a hierarchy node, and read the values from an Excel worksheet - however, after many attempts to do so, I started playing with just one variable to figure out what the problem was.
I have already seen the following two threads and SAP notes on passing variable values from the button:
Re: Button in BEx Analyzer 7.0
Re: How to set variables values via VBA.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0881371-78a1-2910-f0b8-af3e184929be?quicklink=index&overridelayout=true
Can anyone please advise?
Cheers,
AL

I managed to figure it out myself!
Instead of VAR_VALUE I need to enter VAR_VALUE_EXT, and it works fine.
I will mark this thread as "answered".

Problem with setting Source Level in Sun Studio 2

I've got problem with setting Source Level to 1.5 in Sun Studio 2. When I try to set it to 1.5 in Project properties and click Ok everything seem to go well, but when I open Project Properties again Source Level is set to 1.4. I need this to work cause I started to lear Java recently and I want to use foreach loop.
Please help

I'm just citing an example using Date().
In fact, whether I use DateFormat or Calendar, it shows the same result.
When I set the date to 1 Jan 1950 0 hours 0 minutes 0 seconds,
jdk1.4.2 will always return me 1 Jan 1950 0 hours 10 minutes 0 seconds.
It works correctly under jdk1.3.1

Obiee 11g . problem with set default as columnname in interaction tab

Hi Obiee gurus ,
I have small problem with set default option in interaction tab in column properties. actually my problem is , i changed one column bold save as set default option bold and how to revert back to my column option. when i create new analysis with same name . it takes set default option for that column.
can Please give some suggestion for this problem.
regards
Srinivas

Hi Srinivas,
i guess this will be same for 11G
Refer
http://blogs.oracle.com/siebelessentials//2008/08/remove_systemwide_default_sett.html
thanks,
Saichand.v

Problems with setting up Exchange account in Outlook

Similar Messages

Maybe you are looking for